Assembly Instructions for Model: EFAB-II
Thank you for choosing the Sanus Systems Model EFAB-II. Every effort has
been made to ensure that your Sanus Systems furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
regarding assembly or missing parts. Replacement parts for Sanus systems
products purchased through authorized dealers will be shipped directly to you.
Supplied Parts List: (All threaded fasteners are shown full size.)
Metal Base - B
Qty. 1
3˝ Cope Tube - A
Qty. 4
Audio Shelf - C
Qty. 1
Floor Glide - D
Qty. 4
Carpet Spike - E
Top Bolt - G
Spike Nut - F
Qty. 4
Qty. 4
Qty. 4
Wire Bushing - H
Qty. 1
Allen Key - J
Qty. 1
Pan Head Bolt - I
Qty. 4
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.16.06 (100020)
Step 3 - Place Audio Shelf on 3″ Cope Tubes
Place the Audio Shelf (C) onto the 3″ Cope Tubes (A).
NOTE:
If you are installing additional Audio Shelves, refer to the Assembly Instructions for Model: EFAS-II.
Secure the Audio Shelf (C) to the 3″ Cope Tubes (A) using the Top Bolts (G). Use the Allen Key (J) to tighten the Top
Bolts.
Press the Wire Bushing (H) into the hole in the Audio Shelf (C).
Diagram 3
H
G
G
C
A
A
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.16.06 (100020)
|