World Wide Web
Printed in Korea
Code No.:GH68-xxxxxA
NA. 11/2008. Rev. 1.0
English...................................................................................1
Contents
Getting started
Your headset overview ....................................................3
Button functions.............................................................4
Charging the headset......................................................4
Wearing on the headset...................................................6
Using your headset
Turning the headset on or off ...........................................7
Pairing with your Bluetooth phone.....................................8
Using call functions.........................................................9
Appendix
Frequently asked questions............................................11
Certification and Safety approvals...................................13
UL certified travel adapter .............................................14
Warranty and parts replacement.....................................15
Specifications...............................................................16
1
Take the time to read through this user’s guide before you start to use
it.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: B014618
Safety precautions
•
Never disassemble or modify your headset for any reason. Doing this
may cause the headset to malfunction or become combustible. Bring
the headset to an authorized service center to repair it or replace the
battery.
•
•
When using your headset while driving, follow local regulations in the
country or region you are in.
Avoid storage at high temperatures (above 50 °C/122 °F), such as in
a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
•
Do not expose the headset or any of its supplied parts to rain or other
liquids.
At very high volumes, prolonged listening to the headset can damage
your hearing.
2
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Ear hook
Volume up
button
Earpiece
Talk button
Volume down
button
Charger jack
Microphone
Make sure you have the following items with your headset : Charger,
User's Guide
The items supplied with your headset may vary depending on your region.
ꢀ
Button functions
Talk button
•
•
•
•
Press and hold to turn te headset on or off.
Press to make or answer a call.
Press to end a call.
Press and hold to enter Pairing mode.
/
Volume up/down buttons
•
•
Press to adjust the volume.
Press and hold to turn the microphone on or off.
Charging the headset
This headset has a rechargeable internal battery which is non-
removable. Ensure that you fully charge the battery before using the
headset for the first time.
1
Put the charger into the jack on the headset and into a power outlet.
During charging, the indicator light will turn red.
ꢁ
2
When the headset is fully charged, the indicator light changes to
blue. Unplug the charger from the power outlet and the headset.
•
•
•
Use only a Samsung-approved travel adapter. Unauthorized adapters
may cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging
because it is a consumable part.
The headset is not able to operate while charging. Try connecting after
charging is completed.
When the battery is low
The headset beeps and the indicator light flashes red. Recharge
the battery. If the headsets powers off during a call, the call will be
automatically transferred to the phone.
ꢂ
Wearing on the headset
Place the headset on your ear.
Ensure to put the correct (Left, Right) earpiece on
each ear.
Depending on what ear you are going to wear the headset, simply adjust
the ear hook accordingly.
Left
Right
6
Using your headset
This section explains how to turn the headset on, pair with the phone,
and use various functions.
•
Activated functions and features may differ depending on the types of
your phone.
•
Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your headset.
Turning the headset on or off
•
•
To turn the headset on, press and hold [ ] until the blue indicator
light flashes 4times.
To turn the headset off, press and hold [ ] until both blue and red
indicator lights flash.
ꢃ
Pairing with your Bluetooth phone
Pairing will create a unique and encrypted wireless link between two
Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth
headset. To use the headset with other Bluetooth devices, both devices
must be paired. When trying to pair the two devices, keep the headset
and the phone reasonably close together.
1
Enter Pairing mode.
•
Turn off your headset and press and hold the [ ] until the
indicator light turns on blue and stays lit after blinking.
•
When you turn on the headset for the first time, it automatically
enters Pairing mode.
2
From your phone, search for, pair, and connect with your headset
according to your phone’s user guide. (Bluetooth PIN: 0000, 4 zeros)
For details, refer to your phone’s user guide.
When the headset and the phone are paired, the headset attempts to
reconnect automatically each time it turns on. Otherwise, press [
] to
reconnect or use phone Bluetooth menu to reconnect to the headset.
8
Using call functions
Making a call
Redialing the last number
Press and hold [ ] to redial the last number.
For some phones, pressing the key opens the call log list. Press [ ] to
dial the selected number.
Dialing a number by voice
Press [ ] to dial a number by voice, and say a name.
Answering a call
Press [ ] to answer a call when you hear incoming call tones.
Ending a call
Press [ ] to end a call.
Rejecting a call
Press and hold [ ] to reject a call when a call comes in.
ꢄ
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press [+] or [-] to adjust the volume.
Muting the microphone
Press and hold [+] or [-] to turn the microphone off so that the person
with whom you are speaking cannot hear you. Press and hold [+] or [-]
again to turn the microphone back on.
Transferring a call from the phone to the headset
Press [ ] to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold [ ] to place the current call on hold.
Answering a second call
Press [ ] to end the first call and answer a second call when you hear
call waiting tones.
Press and hold [ ] to place the first call on hold and answer a second
call when you hear waiting tones.
To switch between the current call and the held call, press and hold [ ].
10
Appendix
Frequently asked questions
Will my headset
work with laptops, support your headset's Bluetooth version and
PCs, and PDAs? profiles. For specifications, see page 16.
Your headset will work with devices that
Will anything cause Appliances such as cordless phones and
interference with
my conversation
when I am using
my headset?
wireless networking equipment may cause
interference with your conversation, usually
adding a crackling noise. To reduce any
interference, keep the headset away from
other devices that use or produce radio waves.
Will my headset
interfere with my
car's electronics,
radio, or
Your headset produces significantly less power
than a typical mobile phone. It also only
emits signals that are in compliance with the
international Bluetooth standard. Therefore,
you should not expect any interference
with standard consumer-grade electronics
equipment.
computer?
11
Can other
When you pair your headset to your Bluetooth
phone, you are creating a private link between
only these two Bluetooth devices. The wireless
Bluetooth technology used in your headset is
not easily monitored by third parties because
Bluetooth wireless signals are significantly
lower in radio frequency power than those
produced by a typical mobile phone.
Bluetooth phone
users hear my
conversation?
The sound is
echoing while
talking.
Adjust the speaker volume, or move to another
area and try again.
How do I take care Wipe it with a soft dry cloth.
of my headset?
The headset does
not fully charge.
The headset and the travel adapter may not
have been connected properly.
Separate the headset from the travel adapter,
reconnect, and charge the headset.
12
Certification and Safety approvals
FCC
FCC ID: A3LWEP750
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
The device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
Users are not permitted to make changes or modify the device in any
way.
Changes or modifications not expressly approved by Samsung will void
the user's authority to operate the equipment.
Industry Canada
IC ID: 649E-WEP750
Operation is subject to the following two conditions: (1) This device may
not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
1ꢀ
The term "IC:" before the certification/registration number only signifies
that registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It
does not imply that Industry Canada approved the equipment.
UL certified travel adapter
The travel adapter for this headset has met UL 1310 safety
requirements.
Please adhere to the following safety instructions per UL guide-lines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.
1ꢁ
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design
and workmanship for the period of one year from the original date of
purchase.ꢀ
If during the period of warranty this product proves defective under
normal use and service you should return the product to the retailer
from whom it was originally purchased or qualified service center. The
liability of Samsung and its appointed maintenance company is limited
to the cost of repair and/or replacement of the unit under warranty.
•
•
The warranty is limited to the original purchaser
A copy of your receipt or other proof of purchase is required for a
proper warranty service
•
The warranty is void if the serial number, date code label or product
label is removed, or if the product has been subject to physical abuse,
improper installation, modification, or repair by unauthorized third
parties
•
•
Specifically exempt from any warranty are limited-life consumable
components such as batteries and other accessories
Samsung will not assume any responsibility for any loss or damage
incurred in shipping. All repair work on Samsung products by
unauthorized third parties voids any warranty
ꢀDepending on your country, the length of warranty may vary.
1ꢂ
Specifications
Item
Specifications and description
2.0+EDR
Bluetooth Version
Support profile
Operating range
Standby time
Talk time
Headset Profile, Hands-Free Profile
Up to 30 feet (10 meters)
Up to 150 hoursꢀ
Up to 6 hoursꢀ
Charging time
Approximately 2 hoursꢀ
ꢀ Depending on the phone type and usage, the actual time may vary.
16
|