BD-J5100
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
ENGLISH
●
Do not expose this apparatus to dripping
or splashing. Do not put objects filled
with liquids, such as vases on the
apparatus.
The user is encouraged to try to correct
the interference by one or more of the
following measures:
CAUTION :
7. Do not block any ventilation openings.
Install in accordance with the
●
CLASS 3B VISIBLE AND INVISIBLE LASER
manufacturer's instructions.
RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM. (IEC 60825-1)
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
●
Reorienting or relocating the receiving
●
●
Do not dispose of batteries in a fire.
antenna.
●
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
●
Do not plug multiple electric devices
into the same wall socket. Overloading a
socket can cause it to overheat, resulting
in a fire.
Increasing the separation between the
equipment and receiver.
●
Connecting this equipment to an outlet
that is on a different circuit than the one
the receiver is connected to.
●
●
There is danger of an explosion if you
replace the batteries used in the remote
with the wrong type of battery. Replace
only with the same or equivalent type.
●
Consulting the dealer or an experienced
radio/TV technician for help.
This class B digital product meets all
requirements of the Canadian Interference -
Causing Equipment Regulations
CLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
WARNING - TO PREVENT
THE SPREAD OF FIRE,
KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
KLASSE 1
LUOKAN 1
KLASS 1
11. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
Note to CATV system installer
PRODUCTO
This reminder is provided to call the CATV
system installer's attention to Article 820-
40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding
and, in particular, specifies that the cable
ground shall be connected to the grounding
system of the building as close to the point
of cable entry as practical.
●
WARNING
NOTES
✎
11. Only use attachments/accessories
-
This product contains chemicals known
to the State of California to cause
cancer and reproductive toxicity.
■
specified by the manufacturer.
12. Use only with the
cart, stand, tripod,
If the Region number of a Blu-ray
Disc/DVDs does not correspond to
the Region number of this player,
the player cannot play the disc.
-
To reduce the risk of fire or electric
shock, do not expose this appliance to
rain or moisture.
bracket, or table
specified by the
manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Precautions
FCC NOTE (for U.S.A)
CLASS 1 LASER pROdUCT
Important Safety Instructions
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on.
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure.
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
dANGER :
●
VISIBLE AND INVISIBLE LASER RADIATION
4. Follow all instructions.
WHEN OPEN. AVOID DIRECT EXPOSURE
TO BEAM. (FDA 21 CFR)
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
3
Contents
Getting Started
System Settings.................................. 14
Language Settings ............................. 14
Security Settings................................. 15
General Settings ................................ 15
Support Settings ................................ 15
SAFETy INFORmATION
Before using the User Manual
Warning............................................... 2
disc Types and Contents your player can play
Precautions.......................................... 3
GETTING STARTEd
media
disc Type
details
Before using the User Manual .............. 4
Logos of Discs the player can play......... 5
Accessories .......................................... 6
Front Panel .......................................... 7
Rear Panel ........................................... 7
Remote Control ................................... 7
Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
mEdIA pLAy
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-
R/+R that have been recorded and finalized, or
a USB storage media containing MKV or MP4
contents.
Playing a Commercially Recorded
VIDEO
Disc ................................................. 16
Playing Files on a USB Device.............. 16
Playing a Disc with User Recorded
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-
RE/-R or a USB storage media containing MP3 or
WMA contents.
MUSIC
PHOTO
Content ............................................. 17
Using DLNA ....................................... 17
Controlling Video Playback................. 18
Controlling Music Playback................. 18
Playing Photo Contents...................... 21
Using Netflix ...................................... 21
Using Pandora ................................... 21
Using YouTube................................... 21
CONNECTIONS
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-
RE/-R or a USB storage media containing JPEG
contents.
Connecting to a TV .............................. 8
Connecting to an Audio System ........... 8
Connecting to a Network Router.......... 9
NOTES
✎
■
The player may not play certain CD-RW/-R and DVD-R because of the disc type or
recording conditions.
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate
that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device
at a bitrate that exceeds 25 Mbps.
Playback may not work for some types of discs, or when you use specific functions,
such as angle change and aspect ratio adjustment. Information about the discs is
written in detail on the disc box. Please refer to this if necessary.
When you play a BD-J title, loading may take longer than a normal title or some
functions may perform slowly.
SETTINGS
■
■
The Setup Procedure............................ 9
Menu Navigation ............................... 11
Accessing the Settings Menu.............. 11
Picture Settings.................................. 11
Sound Settings................................... 11
Network Settings ............................... 13
AppENdIx
■
■
Troubleshooting................................. 23
Specifications..................................... 24
■
disc types your player cannot play
●
●
●
●
●
HD DVD
DVD-RAM
DVD-RW (VR mode)
CVD/CD-ROM/CDV/
CD-G /CD-I / LD
(CD-Gs play audio
only, not graphics.)
3.9 GB DVD-R
for Authoring.
●
●
DVD-ROM/PD/
MV, etc
Super Audio CD
(except CD layer)
4
longer the image takes to display.
Logos of Discs the player can
play
Region Code
●
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded
from commercial sites.
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Code for this player is displayed on
the rear panel of the player.
●
●
Your player only supports video with a frame rate under 30fps (frames per second).
Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
●
●
●
Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible
with this player.
Blu-ray Disc
BD-LIVE
disc Region
Area
If some USB devices require excessive power, they may be limited by the circuit safety
device.
Type
Code
If playback from a USB HDD is unstable, provide additional power by plugging the HDD
into a wall socket.
If the problem continues, contact the USB HDD manufacturer.
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
A
●
●
●
SAMSUNG is not responsible for any data file damage or data loss.
NTSC broadcast system in U.S.A, Canada,
Korea, Japan
Europe, Greenland,
French territories, Middle
East, Africa, Australia and
New Zealand.
Your player does not support NTFS compressed files, sparse files, or encrypted files.
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Blu-ray
disc
B
Supported File Formats
Supported Video File Formats
India, China, Russia,
Central and South Asia.
Notes on the USB connection
File
C
1
2
3
Container
Extension
Video Codec
MP4v3
Audio Codec
Resolution
1920x1080
1920x1080
●
Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
MP3
Dolby Digital
DTS
WMA
PCM
The U.S., U.S. territories and
Canada
●
The player does not support folder or file
*.avi
AVI
names longer than 128 characters.
Europe, Japan, the Middle
East, Egypt, South Africa,
Greenland
H.264 BP/MP/HP
●
Some USB/External HDD/digital camera
devices may not be compatible with the
player.
VC-1 AP
MP3
Dolby Digital
DTS
1920x1080
1920x1080
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
*.mkv
MKV
●
Your player supports the FAT16, FAT32,
H.264 BP/MP/HP
and NTFS file systems.
●
dVd-
VIdEO
Connect USB devices directly to the player’s
VC-1 AP
VC-1 SM
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
Mexico, South America,
Central America,
Australia, New Zealand,
Pacific Islands, Caribbean
USB port. Connecting through a USB cable
may cause compatibility problems.
*.wmv
*.mp4
WMV (wmv9)
MP4
WMA
AAC
4
5
6
●
Inserting more than one memory device
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
into a multi-card reader may cause the
reader to operate improperly.
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
●
The player does not support the PTP
protocol.
MP1, 2
Dolby Digital
DTS
*.mpg
*.mpeg
●
Do not disconnect a USB device while it
MPEG
MPEG2
China
is transferring, playing, or recording files.
The bigger the image resolution, the
H.264 BP/MP/HP
●
5
Limitations
•
AVCHd (Advanced Video Codec High definition)
Even when a file is encoded by a supported codec listed above, the file might not be
-
●
played if its content has a problem.
This player can play back AVCHD format discs. These discs are normally recorded and
Normal playback is not guaranteed if the file’s container information is wrong or the
file itself is corrupted.
Files having a higher Bit rate/frame rate than standard may stutter during sound/video
playback.
used in camcorders.
-
●
The AVCHD format is a high definition digital video camera format.
-
●
The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
The Seek (skip) function is not available if the file’s index table is damaged.
-
●
Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
that use the "x.v.Color" format.
Video decoder
•
•
Supports up to H.264 Level 4.1 and AVCHD
Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-
●
"x.v.Color" is a trademark of Sony Corporation.
-
●
"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,
Ltd. and Sony Corporation.
-
NOTES
✎
Does not support GMC 2 or higher
-
■
Some AVCHD format discs may not play, depending on the recording condition.
Audio decoder
AVCHD format discs need to be finalized.
Supports WMA 7, 8, 9 and STD
Does not support WMA sampling rate of 22050Hz mono.
AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bitrate: 320kbps
-
■
"x.v.Color" offers a wider color range than normal DVD camcorder discs
.
-
-
Accessories
Supported Music File Formats
The following accessories are included with your Blu-ray player:
File
Audio
Codec
Container
Extension
Support Range
*.mp3
*.wma
MP3
MP3
-
* Sampling rates (in kHz) - 8, 11, 16, 22, 32,
44.1, 48
WMA
WMA
* Bit rates - All bit-rates from 5kbps to 355kbps
Supported Picture File Formats
Batteries for Remote
User Manual
(AK68-02593A)
Remote Control
(AK59-00149A)
Control (AAA Size)
File Extension
Type
JPEG
PNG
Resolution
15360x8640
15360x8640
(4301-000115)
*.jpg
*.jpeg
*.jpe
*.png
6
Front Panel
Remote Control
Tour of the Remote Control
REmOTE CONTROL SENSOR
pOWER BUTTON
Turn the TV on and off.
Turn the player on and off.
(This button is only available for Samsung TVs,)
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs,)
TV volume adjustment.
Press to open and close the disc tray.
(This button is only available for Samsung TVs,)
Press the number buttons to operate options.
dISC TRAy
USB HOST
OpEN/CLOSE BUTTON
Use to enter the disc menu.
Use to enter the popup menu/title menu.
NOTES
Press to skip backwards or forwards.
Press to search a disc backwards or
forwards.
✎
■
Press to stop a disc.
Press to play a disc.
Press to pause a disc.
You can perform software upgrades using the USB Host jack with a USB flash
memory stick only.
Press to move to the Home menu.
Press to switch the Blu-ray Disc/DVD’s
subtitle language.
Use to access various audio functions on
a disc (Blu-ray Disc/DVD).
■
Please open and pull out the cover USB before inserting USB device.
Press to use the Tools menu.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change
menu values.
Rear Panel
Press to exit the menu.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to see the full screen on a TV.
During Blu-ray Disc/DVD playback, the
Full Screen button does not operate.
BONUS REPEAT REPEAT
FULL
SCREEN
VIEW
A-B
Press to use the bonusview function.
Allows you to repeat a title, chapter,
track, or disc.
Allows you to play selected portions of a
disc repeatedly.
Installing batteries
●
●
Check if the remote sensor is blocked by
obstacles.
Check if there is any fluorescent lighting
nearby
.
HdmI OUT LAN dIGITAL AUdIO OUT
CAUTION
!
■
Dispose of batteries according to local
environmental regulations. Do not put them
in the household trash.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or
overheat the batteries.
■
■
NOTES
✎
■
If the remote does not operate properly:
Check the polarity (+/–) of the batteries.
Check if the batteries are drained.
■
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
●
●
7
Connecting to an Audio System
Connections
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
Connecting to a TV
Do not connect the power cord to the wall outlet until you have made all
the other connections.
When you change the connections, turn off all devices before you start.
-
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your TV.
-
Do not connect the power cord to the wall outlet until you have made all
the other connections.
-
method 1 Connecting to an HdmI compatible AV receiver
When you change the connections, turn off all devices before you start.
-
●
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your receiver.
●
Best quality (Recommended)
method 2 Connecting to an AV receiver with a digital Coaxial Cable
●
Audio
Video
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital
Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
●
Good quality
●
You will hear sound only through the front two speakers with Digital Output
set to PCM.
NOTES
✎
■
If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
■
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
■
Depending on your TV, certain HDMI output resolutions may not work. Please refer
to the user manual of your TV.
method 1
method 2
Audio
Audio
■
When you connect the player to your TV using an HDMI cable or to a new TV, and
then turn it on for the first time, the player automatically sets the HDMI output
resolution to the highest supported by the TV.
■
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to
Off in the menu.
■
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a
high speed HDMI cable.
■
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen
.
8
Connecting to a Network Router
Settings
You can connect your player to your network router using one of the methods
illustrated below.
Setup I On-Screen Language
The Setup Procedure
Select
a
language for the on-screen displays.
To use DLNA network functionality, you must connect your PC to your network
as shown in the illustration.
Hrvatski
~
~
The Home screen will not appear if
you do not configure the Setup.
dansk
Wired Network
The OSD (On Screen Display) may
change in this player after you upgrade
the software version.
English
>
move
"
Select
~
~
The access steps may differ
depending on the menu you
selected.
2. Select the desired language,
and then press the button.
v
The Start screen appears.
Broadband modem
(with integrated router)
After the Setup process is complete,
you can then operate the panel
buttons and remote control.
Setup
Broadband
service
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Or
After you have connected the player
to your TV, turn on the TV and
player. When you turn on the player
the first time, the player's Setup
screen appears on the TV. The Setup
procedure lets you set the On Screen
Display (OSD) and menu languages,
the aspect ratio (screen size), the
network type, and connect the player
to your network.
Start
Router
a
previous
"
Select
Broadband
service
3. Press the
button. The TV
Aspect screen appears.
v
Broadband
modem
4. On the TV Aspect screen, select
To run the Setup procedure, follow
these steps:
the desired TV Aspect Ratio, and
then press the
button. The
v
Network screen appears.
1. Plug in the Blu-ray player, turn on
your TV, and then turn on the Blu-
ray player by pressing the pOWER
button on the remote. The Setup
Language screen appears.
NOTES
✎
■
NOTE
Internet access to Samsung's software update server may not be allowed,
depending on the router you use or your ISP's policy. For more information, contact
your ISP (Internet Service Provider).
✎
■
An explanation of each Aspect Ratio
appears on the screen. Highlight
each choice to see each explanation.
If you have an HDTV, we suggest
you choose 16:9 original.
■
DSL users, please use a router to make a network connection.
9
■
●
5. If you have connected a LAN cable to
the Blu-ray player, the Blu-ray player
After the Setup process is complete, you
can operate the HDMI-CEC function.
If you want to use an Anynet+
(HDMI-CEC) function to aid in the
initial set up process, please follow
the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using an HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3) Set the TV to the Setup Procedure.
If you leave the player in the stop
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off.
Home menu
3. Press the ▲▼ buttons to select
the desired submenu, and then
5
1
2
■
automatically verifies your wired network.
press the
button.
v
pLAy dISC
pHOTOS
VIdEOS
mUSIC
Initial Settings I Network - Wired
4. Press the ▲▼ buttons to select
the desired item, and then press
Choose the method to configure Internet Protocol (IP). Please make
sure that the Ethernet cable is connected.
6
the
button.
v
Auto
:
Configure IP automatically
No Disc
5. Press the EXIT button to exit the
7
8
menu.
3
4
Manual
App
1
App
2
App
3
App
4
App
5
more
Change device
Settings
Auto
NOTES
✎
a
Previous
d
Skip ?\ Move
"
Select
■
The access steps may differ depending
■
on the menu you selected. The OSD
(On Screen Display) may change in
this player after you upgrade the
software version.
Access and play VIDEOS.
Access and play MUSIC.
Access and change SETTINGS.
Change the Source Device.
Access and view PHOTOS.
Play a DISC.
1
2
3
4
5
6
7
8
NOTE
✎
■
If you have no network, select Skip
by pressing the BLUE (d) button,
and then go to Step 7.
6. After the player verifies the network,
press the button.
Picture Settings
v
Menu Navigation
7. The Initial Settings Complete window
appears and remains on the screen for a few
moments. Then, the Home screen appears.
You can configure various display
options such as the TV Aspect Ratio,
Resolution, etc.
Access and use APPLICATIONS.
Access MORE APPLICATIONS.
NOTES
✎
1
2
■
TV Aspect Ratio
The Home screen will not appear if
you do not configure the player's
settings during Setup, except as
noted below.
If you press the BLUE (d) button
during network setup, you can
NOTE
✎
Depending on the type of television
you have, you may want to adjust the
screen size setting.
3
4
■
The Videos, Photos, and Music
■
options require that you have an
appropriate disc in the player or a USB
flash device attached to the player.
access the Home screen even if the
network setup is not completed yet.
If you do not complete network set
NOTES
✎
■
HOmE Button : Press to move to
the Home menu.
Depending on the disc type, some
■
1
aspect ratios may not be available.
up during the Initial Setup, you can
do it later. See page 13.
When you return to the Home
Accessing the Settings Menu
■
If you select an aspect ratio and
RETURN Button : Return to the
previous menu.
■
2
3
4
option which is different than the
aspect ratio of your TV screen, the
picture might appear to be distorted.
To access the Settings menu and sub-
menus, follow these steps:
1. Press the POWER button.
screen, the full screen mode is
cancelled automatically.
If you want to display the Setup
screen again to make changes, press
(Enter) / dIRECTION Button :
v
■
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
The Home Menu appears.
the
^
button on the front panel of
2. Press the ▲▼◀▶ buttons to
the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
ExIT Button : Press to exit the
current menu.
select Settings, and then press the
button.
v
11
NOTES
Resolution according to the output
mode
✎
Bd Wise (Samsung TVs only)
HdmI Color Format
■
If the TV you connected to the player
does not support Movie Frame or
the resolution you selected, the
message "If no pictures are shown
after selecting ‘Yes’, please wait for
15 seconds to return to the previous
resolution." appears. If you select
yes, the TV’s screen will go blank for
15 seconds, and then the resolution
will revert to the previous resolution
automatically.
Lets you set the color space format
for HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
BD Wise is Samsung’s latest inter-
connectivity feature.
●
Blu-ray disc/E-contents/digital
Contents playback
When you connect a Samsung player
and a Samsung TV with BD Wise to
each other via HDMI, and BD Wise
is on in both the player and TV, the
player outputs video at the video
resolution and frame rate of the Blu-
ray Disc/DVD.
HdmI / connected
Output
Setup
HdmI mode
HdmI deep Color
E-contents/
Blu-ray
disc
digital
Lets you output video from the
HDMI OUT jack with Deep Color.
Deep Color provides more accurate
color reproduction with greater color
depth.
contents
■
If the screen stays blank after you have
changed the resolution, remove all
Resolution of
Blu-ray Disc
BD Wise
1080p
NOTES
✎
discs, and then press and hold the ^
button on the front of the player for
more than 5 seconds. All settings are
restored to the factory default. Access
the Resolution function and reset the
output resolution to a resolution that
is compatible with your TV.
■
Max.
Max.
When BD Wise is on, the Resolution
Auto
Resolution of Resolution of
TV input TV input
setting automatically defaults to BD
Wise and BD Wise appears in the
Resolution menu.
progressive mode
1080p@60F
Lets you improve picture quality when
viewing DVDs.
■
If the player is connected to a device
(Movie Frame : 1080p@60F 1080p@60F
Off)
that does not support BD Wise, you
cannot use the BD Wise function.
■
■
When the factory default settings
are restored, all stored user BD data
is deleted.
Movie Frame :
■
1080p@24F 1080p@24F
Auto (24Fs)
For the proper operation of BD
Sound Settings
Wise, set the BD Wise menu of
both the player and the TV to On
1080i
720p
480p
1080i
720p
480p
1080i
720p
480p
.
The Blu-ray Disc must have the 24
frame feature for the player to use
the Movie Frame (24Fs) mode.
digital Output
Resolution
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer
to the Digital Output Selection table on
the next page.
Lets you set the output resolution
of the HDMI video signal to Auto,
1080p, 1080i, 720p, or 480p. The
number indicates the number of
lines of video per frame. The i and p
indicate interlaced and progressive
scan, respectively. The more lines, the
higher the quality.
movie Frame (24Fs)
●
dVd playback
Setting the Movie Frame (24Fs) feature
to Auto allows you to adjust the
HdmI / connected
HdmI mode
480i
Output
Setup
player’s HDMI output to 24 frames per
second for improved picture quality.
You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this
frame rate. You can select Movie
Frame only when the player is in the
HDMI 1080p output resolution mode.
BD Wise
Auto
Max. Resolution of TV
input
1080p
1080i
720p
480p
1080p
1080i
720p
480p
11
Blu-ray Discs may include three audio streams :
digital Output Selection
pCm downsampling
Main Feature Audio : The audio
soundtrack of the main feature.
-
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz
before they are outputted to an
amplifier. Choose On if your amplifier
or receiver is not compatible with a
96KHz signal.
Bitstream
(Re-encoded
dTS)
Bitstream
(Re-encoded
dolby d)
Bitstream
(Unprocessed)
BONUSVIEW audio : An additional
soundtrack such as the director or
actor’s commentary.
-
Setup
pCm
HdmI
Receiver or
Coaxial
HdmI supported
AV receiver or
Coaxial
HdmI
Receiver
HdmI
Receiver
Navigation Sound Effects : When you
-
Connection
Coaxial
Coaxial
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different
on each Blu-ray Disc.
Up to
7.1ch
Re-encoded
DTS
Re-encoded
Dolby Digital *
PCM
PCM 2ch
PCM
PCM 2ch
dynamic Range Control
Dolby
Digital
Dolby
Dolby
Re-encoded
DTS
Re-encoded
Dolby Digital *
NOTES
PCM 2ch PCM 2ch
PCM 2ch PCM 2ch
PCM 2ch PCM 2ch
PCM 2ch PCM 2ch
✎
Digital
Digital
Lets you apply dynamic range control
to Dolby Digital, Dolby Digital Plus,
and Dolby TrueHD audio.
■
Be sure to select the correct Digital
Dolby
Digital Plus
Dolby
Dolby
Re-encoded
DTS
Re-encoded
Dolby Digital *
Output or you will hear no sound or
just loud noise.
If the HDMI device (AV receiver, TV)
Digital Plus
Digital
Audio
Stream on
■
●
Dolby
TrueHD
Dolby
Dolby
Re-encoded
DTS
Re-encoded
Dolby Digital *
Auto : Automatically controls the
TrueHD
Digital
is not compatible with compressed
formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack.
Also turns dynamic range control on
for Dolby Digital and Dolby Digital Plus.
Blu-ray
Disc
Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS
DTS
DTS
DTS
■
Regular DVDs do not have
DTS-HD High
Resolution PCM 2ch PCM 2ch Resolution
Audio
DTS-HD High
BONUSVIEW audio and Navigation
Sound Effects.
Some Blu-ray Discs do not have
Re-encoded
DTS
Re-encoded
Dolby Digital *
Audio
■
●
Off : Leaves the dynamic range
DTS-HD
Master
Audio
DTS-HD
Master
Audio
BONUSVIEW audio and Navigation
Sound Effects.
If you play MPEG audio soundtracks,
uncompressed, letting you hear the
original sound.
Re-encoded
DTS
Re-encoded
Dolby Digital *
PCM 2ch PCM 2ch
DTS
■
●
On : Turns dynamic range control
the audio signal outputs as PCM
regardless of your Digital Output
selections (PCM or Bitstream).
PCM
PCM 2ch PCM 2ch PCM 2ch PCM 2ch
PCM 2ch
PCM 2ch
on for all three Dolby formats.
Quieter sounds are made louder
and the volume of loud sounds is
reduced.
Audio
Stream on
DVD
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
■
If your TV is not compatible with
DTS
PCM 2ch PCM 2ch
DTS
DTS
DTS
DTS
compressed multi-channel formats
(Dolby Digital, DTS), the player may
output PCM 2ch downmixed audio
even though you selected Bitstream
(either Re-encoded or Unprocessed)
in the setup menu.
If your TV is not compatible with PCM
sampling rates over 48kHz, the product
will output at 48kHz downsampled
PCM audio even though you set PCM
Downsampling to Off.
Decodes main
feature audio
Decodes main
feature audio
Outputs only main
downmixing mode
Decodes main
feature audio stream and BONUSVIEW and BONUSVIEW
so that your AV audio stream audio stream
feature audio and
Definition
for
Lets you select the multi-channel
BONUSVIEW audio receiver can decode together into PCM together into PCM
■
downmix method that is compatible
with your stereo system. You can choose
to have the player downmix to normal
stereo or to surround compatible stereo.
Any
stream together
into PCM audio and
adds Navigation
Sound Effects.
the audio bitstream.
You will not hear
BONUSVIEW audio
and Navigation
audio and adds
Navigation Sound Navigation Sound
Effects, then re- Effects, then re-
encodes the PCM encodes the PCM
audio into DTS
bitstream
audio and adds
Blu-ray
Disc
Sound Effects.
audio into Dolby
Digital bitstream
If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
*
12
4. In the Internet Protocol Setup field,
3. Press the ▼▲ buttons to select Wired
Network Settings
device Name
Network Settings, and then press the
select Auto if it is not selected. (Press
button. The Wired Network Settings
screen appears.
v
to select Auto, and then press
.)
v
The Device Name function allows
you to change the player's name by
selecting from a device name list.
v
Please contact your ISP to find out if
your IP address is static or dynamic.
If it is dynamic - and most are - we
recommend using the Auto procedure
for network setup. This is easiest and
will work in the majority of cases.
If it is static, you must use the manual
set up procedure.
5. The Auto Function acquires and fills in
the values for Ip Address, Subnet mask,
etc., automatically.
4. Select the Internet Protocol Setup field,
and then press the
button.
v
5. Press the ▲▼ buttons to select manual,
and then press the button.
Bd-Live Internet Connection
NOTE
v
✎
6. Press the ▼ button to go to the first
■
This process can take up to five
Set to allow or prohibit an Internet
connection when you use the BD-
LIVE service.
entry field (IP Address).
minutes.
7. Use the number buttons on your
6. After the Network Function has
acquired the network values, press the
RETURN button.
Network setup directions start below
.
remote to enter numbers.
●
Allow (All) : The Internet
8. When done with each field, use the ▶
button to move to the next field. You
can also use the other arrow buttons to
move up, down, and back.
NOTE
✎
connection is allowed for all BD-
LIVE contents.
7. Select Network Test, and then press
v
■
This unit can only be connected to
a Network via a wired connection
to ensure the player has connected to
your network.
.
●
Allow (Valid Only) : The Internet
9. Enter the Ip Address, Subnet mask, and
8. When the Network Test is complete,
press the RETURN twice to return to the
Main Menu.
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
Wired Network Settings
Gateway values in the same way.
11. Press the ▼ button to go to dNS.
1. In the Home menu, press the ▲▼◀▶
9. If the Network Function does not
11. Press the ▼ button to go to the first
●
prohibit : No Internet connection is
buttons to select Settings, and then
acquire the network values, go to the
DNS entry field.
directions for Manual Setup
.
press the
button.
allowed for any BD-LIVE content.
v
12. Enter the numbers as above.
13. Press the RETURN button on your
2. Press the ▼▲ buttons to select
NOTES
✎
manual Network Setup
remote control.
Network, and then press the
v
■
What is a valid certificate?
14. Run a Network Test to ensure the player
button.
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc, the
server uses the transmitted data to
check if the disc is valid and sends
the certificate back to the player.
Before you start manual network setup,
you need the network setting values.
has connected to your network
.
3. Press the ▼▲ buttons to select Wired
Network Settings, and then press the
To get the network setting values,
contact your ISP (Internet Service
Provider) or your network administrator.
Network Test
button. The Wired Network Settings
v
screen appears
.
Use this menu item to check whether
your network connection is working
To enter the Network Settings into or not.
■
The Internet connection may be
Settings
restricted while you are using BD-
LIVE contents.
Wired Network Settings
Pictur
Internet Protocol Setup
Netw
Syste
:
:
:
:
Auto
▶
your player, follow these steps:
Soun
IP Address
Subnet Mask
Gateway
0
0
0
0
0
0
0
0
0
0
0
0
Network Status
1. In the Home menu, press the ▼▲◀▶
Langu
buttons to select Settings, and then
DNS
:
Auto
Secur
Use to check whether a connection to
a network and the Internet has been
established.
DNS Server
:
0
0
0
0
press the
button.
v
Gene
Supp
>
Move
"
Select
'
Return
2. Press the ▲▼ buttons to select
Network, and then press the
button.
v
13
NOTES
NOTES
Using Bd-LIVE™
System Settings
✎
✎
■
■
In the external memory mode,
This function is not available if the
Once the player is connected to
the network, you can enjoy various
movie-related service content using a
BD-LIVE compliant disc.
HDMI cable does not support CEC.
disc playback may be stopped if
you disconnect the USB device in
the middle of playback.
Setup
■
■
If your Samsung TV has an Anynet+
logo, then it supports the Anynet+
function.
Depending on your TV, certain HDMI
output resolutions may not work.
Please refer to the user manual of
your TV.
If you have Anynet+ turned on,
when you turn off the product or
disconnect and then reconnect the
power cable, the product turns on
automatically to re-establish the
Anynet+ connection. After about
15 seconds, it turns off again
automatically.
By using the Setup function, you can set
the language, Network Settings, etc.
For more information about the Setup
function, refer to the Setup section of
this user manual (See page 9~10).
■
Your player supports the FAT16,
FAT32, and NTFS file systems. We
recommend you use USB devices that
support the USB 2.0 protocol with 4
MB/sec or faster read/write speed.
1. Attach a USB memory stick to the USB jack
on the front of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
■
■
■
The Resume Play function may not
work after you format the storage
device.
Quick Start
2. Insert a Blu-ray Disc that supports BD-
LIVE.
When set to On, Quick Start lets
the player start up more quickly by
decreasing the boot time.
The total memory available to BD
Data Management may differ,
depending on the conditions.
3. Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
■
Some Samsung TVs, when
NOTE
NOTE
✎
connected to this product using the
Anynet+ function will, when you turn
them on, display a warning popup
message saying no connection has
been found. Never-the-less, the
Anynet+ connection is properly
established and available to use.
✎
Language Settings
■
If this function is set to On, Standby
power consumption will be increased.
■
The way you use BD-LIVE and
the provided contents may differ,
depending on the disc manufacturer.
You can select the language you
prefer for the On-Screen menu, disc
menu, audio, and subtitles.
Anynet+ (HdmI-CEC)
The dLNA Function
Anynet+ is a convenient function that
offers linked operations with other
Samsung products that have the
Anynet+ feature.
To operate this function, connect this
player to an Anynet+ Samsung TV
with an HDMI cable.
With Anynet+ on, you can operate
this player using a Samsung TV remote
control and start disc playback simply
NOTE
✎
Bd data management
DLNA lets you play music, video, and
photo files stored in your PC through
your Blu-ray player.
To use DLNA, you must install DLNA
software or already have DLNA
software installed on your PC and
connect the Blu-ray player to your PC
via your network (see page 13).
■
The selected language will only
appear if it is supported on the disc.
Enables you to manage the
downloaded contents you accessed
through a Blu-ray disc that supports
the BD-LIVE service and stored on a
flash drive.
You can check the device’s
information including the storage
size, delete the BD data, or change
the Flash memory device.
NOTE
✎
by pressing the pLAy (
) button on
■
PCs running Windows 7 and
the TV’s remote control.
For more information, please see the
TV user manual.
Windows 8 have DLNA software
(Play To) built in.
For instruction explaining how to play content
located on your PC, See pages 17~18.
14
NOTES
Security Settings
General Settings
Time Zone
✎
Change pIN
■
The upgrade is complete when the
Change the 4-digit password used to
access security functions.
player turns off, and then turns on
again by itself.
When you access this function for
the first time, the PIN screen appears.
Enter the default PIN - 0000 - using
the number buttons. To change the
PIN, use the Change PIN function.
Each time you access the Security
Settings hereafter, you must enter that
four digit PIN. If you don’t change the
PIN, continue using the default PIN.
■
■
Never turn the player off or back on
manually during the update process.
To change the PIN, follow these steps:
Lets you specify the time zone that is
applicable to your area.
Samsung Electronics takes no
legal responsibility for any product
malfunction caused by an unstable
Internet connection or consumer
negligence during a software
upgrade.
1. Select Change pIN, and then press
the
button. The Enter old PIN
v
screen appears.
Support Settings
2. Enter the old PIN. If you never
changed the PIN, enter the
default PIN: 0000. The Enter new
PIN screen appears.
3. Enter the new PIN in the Enter
new PIN field.
4. Re-enter the new PIN in the
Confirm new PIN field. The "PIN
is changed successfully." message
appears.
Software Upgrade
■
No disc should be in the product when
you upgrade the software By Online.
The Software Upgrade menu allows
you to upgrade the player’s software
for performance improvements or
additional services.
Bd parental Rating
By USB
Prevents playback of Blu-ray Discs
with specific age ratings unless the 4
digit PIN is entered.
To upgrade by USB, follow these steps:
Owners & Support > Manual &
Downloads. Then, follow the
directions on the screen.
2. Download the latest USB software
upgrade zip archive to your
computer.
3. Unzip the zip archive to your
computer. You should have a
single RUF file with the same
name as the zip file.
By Online
dVd parental Rating
To upgrade By Online, follow these
steps:
5. Press the
button.
v
This function works in conjunction with
DVDs that have been assigned an age
rating or numeric rating that indicates
the maturity level of the content. These
numbers help you control the types of
DVDs that your family can watch.
Select the rating level you want to
set. For example, if you select Level 6,
discs rated above 6 - Level 7 and 8 -
will not play.
A larger number indicates more
mature content.
When the DVD Parental Rating function
is on, you must enter the 4 digit PIN to
play discs with restricted rating levels.
If you forget your password
1. Remove any discs from the
player.
1. Remove any discs.
2. In the player’s menu, go to
Settings > Support > Software
Upgrade.
2. Press and hold the button on the
^
front panel for 5 seconds or more.
All settings will revert to their
factory settings.
3. Select By Online, and then press
the
button. The Connecting
v
4. Copy the RUF file to a USB flash
to Server message appears.
NOTE
✎
drive.
4. A popup message will appear if
■
When the factory default settings
5. Make sure there is no disc in the
player, and then insert the USB
flash drive into the USB port of
the player.
6. In the player’s menu, go to
Settings > Support > Software
Upgrade.
an update is available.
are restored, all the user stored BD
data is deleted.
5. If a download is available, select
yes. The download and upgrade
process starts. (Important: Never
turn the player off or on manually
during an upgrade.)
6. When the update is complete, the
7. Select By USB
.
player will restart automatically
.
15
NOTES
3. The update progress popup
✎
Media Play
■
■
■
■
appears.
No disc should be in the product
when you upgrade the software
using the USB Host jack.
4. When the update is complete, the
NOTE
✎
player will restart automatically.
Playing a Commercially
■
When the software upgrade is
done, check the software details in
the software Upgrade menu.
If the pop-up does not appear, go
to Method 2.
Recorded Disc
NOTES
✎
■
The upgrade is complete when the
3. Use the ▲▼ buttons to select
player turns off, and then turns on
again by itself.
Do not turn off the player during
the software upgrade. It may cause
the player to malfunction.
1. Press the
button to open the
8
photos, Videos or music, and then
,
disc tray.
press the
button. The Photos,
■
■
v
Never turn the player off or on
manually during the update process.
2. Place a disc gently into the disc
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both.
tray with the disc's label facing up.
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
3. Press the
button to close
8
the disc tray. Playback starts
automatically.
Auto Upgrade Notification
connection or consumer negligence
during software upgrade
.
If you have connected the player to
your network, and then set Auto
Upgrade Notification on, the player
automatically notifies you when a
new software version is available for
the player.
NOTE
✎
Playing Files on a USB Device
■
Even though the player will display
Contact Samsung
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and going to Step 3 in
Method 2 below.
There are two methods you can
use to play or view multimedia files
located on a USB device.
Provides contact information for
assistance with your player.
To set Auto Upgrade Notification on,
follow these steps:
Terms of Service Agreement
method 1
Lets you view the general disclaimer
regarding third party contents and
services.
1. Select Auto Upgrade Notification,
1. Turn the player on.
and then press the
button.
v
2. Connect the USB device to the
USB port on the front panel
of the player. The New Device
Connected pop-up appears.
2. Use the ▲▼ buttons to select On,
and then press the button
4. If necessary, use the ▲▼◀▶
.
buttons to select a folder, and
then press the
v
Reset
button.
v
If there is a new software version
available, the player notifies you with
a popup message.
5. Select a file to view or play, and
then press the button.
Returns all settings to their factory
defaults except for the network
settings.
v
pLAy dISC
pHOTOS
VIdEOS
mUSIC
6. Press the RETURN button to exit a
folder or the ExIT button to return
to the Home screen.
1. To upgrade the firmware, remove
New device connected.
any discs from the player.
123
photos
2. Select yes in the Pop-up. The
player turns off automatically, then
restarts, and begins the download.
(Never turn the player on or off
manually during an upgrade.)
Videos
No Disc
7. Go to pages 18~20 for
music
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.
>
move
"
Enter
'
Return
App
1
App
2
App
3
App
4
App
5
more
Change device
Settings
16
NOTE
4. If necessary, use the ▲▼◀▶
method 2
✎
Using DLNA
buttons to select a folder, and
■
Even though the player will display
1. Turn the player on.
then press the
button.
folders for all content types, it will
only display files of the Content
Type you selected in Step 2. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 2.
v
pC
Blu-ray disc player
2. Connect the USB device to the
USB port on the front panel of
the player. Select Change device
and then press the ▲▼ button to
5. Use the ▲▼◀▶ buttons to select
a file to view or play, and then
press the
button.
play back pC's
files
v
6. Press the RETURN button to exit a
folder or the ExIT button to return
to Home screen.
select USB. Press the
button.
v
dLNA Connection
pLAy dISC
pHOTOS
VIdEOS
mUSIC
Change device
1. Connect the Blu-ray Disc Player,
your PC, and/or your DLNA
compatible device to the same
network.
3. A screen appears listing the
contents of the disc. Depending
on how the contents are
7. Go to pages 18~20 for
No disc
123
a
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.
No Disc
arranged, you will see either
folders, individual files, or both.
2. Follow the directions in the DLNA
software Installation/Instruction
manual to set up devices and files
for playing or viewing.
NOTE
✎
Close
hange ece
App
1
App
2
Settings
4. If necessary, use the ▲▼◀▶
■
If you insert a disc when playing
buttons to select a folder, and
a USB device, the device mode
changes to "Disc" automatically.
then press the
button.
v
3. Use the ▲▼◀▶ buttons to select
3. Select Change device on the
5. Use the ▲▼◀▶ buttons to select
pHOTOS, VIdEOS or mUSIC on
,
player's Home screen, and then
press the
of DLNA connected devices that
appears, select your PC or other
DLNA compatible device, and
a file to view or play, and then
the Home screen, and then press
Playing a Disc with User
Recorded Content
button. In the list
v
press the
button.
v
the
button. The Photos,
v
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
6. Press the RETURN button one
or more times to exit a current
screen, exit a folder, or to return
to the Home screen. Press the
ExIT button to return directly to
the Home Screen.
You can play multimedia files you
have recorded on Blu-ray, DVD, or CD
discs.
then press the
button.
v
4. Use the ◀▶ buttons to select the
type of content you want to view or
play - VIdEOS, pHOTOS, or mUSIC -
folders, individual files, or both
.
1. Place a user recorded disc into
the disc tray with the disc’s label
facing up, and then close the tray.
NOTE
✎
7. Go to pages 18~20 for
instructions that explain how to
control playback of videos, music,
and pictures on a disc.
■
and then press the
button.
Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
v
NOTE
✎
2. Use the ◀▶ buttons to select the
type of content you want to view
or play - VIdEOS, pHOTOS, or
■
Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 4. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 4.
mUSIC - and then press the
button.
v
Music screen and repeating Step 3
.
17
5. A screen appears listing the
contents of the PC or DLNA
Device. Depending on how the
contents are arranged, you will
see either folders, individual files,
or both.
Controlling Video Playback
Controlling Music Playback
In pause mode, press the
button. Each time
4
Slow motion
play
you press the
button,
4
You can control the playback of
video content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer. Depending on the media,
some of the functions described in
this manual may not be available.
You can control the playback of music
located on a Blu-ray disc, DVD, CD,
USB device, or your computer.
the playback speed will
change.
In pause mode, press the
6. If necessary, use the ▲▼◀▶
button.
Buttons on the Remote Control
used for music playback
7
Step motion
play
Each time you press the
buttons to select a folder, and
button, a new frame
7
then press the
button.
v
During Blu-ray or DVD disc playback,
the Full screen button does not operate
appears.
7. Use the ▲▼◀▶ buttons to select
.
During playback, press the
a file to view or play, and then
Buttons on the Remote Control
used for Video playback
or
button.
1
2
press the
button.
v
1
Each time you press the
or button, the disc
Skip motion
play
8. Press the RETURN button one
or more times to exit a current
screen, exit a folder, or to return
to the Home screen. Press the
ExIT button to return directly to
the Home Screen.
1
2
moves to the previous or
next chapter or file.
2
4
5
2
Using the disc menu, title
menu, popup menu, and
title list
3
6
1
9. Go to pages 18~20 for
instructions that explain how to
control playback of videos, music,
and pictures on a disc.
NUmBER buttons (Audio Cd (Cd-
dA) only) : During Playlist playback,
press the desired track number.
The selected track is played.
During playback, press
this button to display the
Disc menu.
1
dISC mENU
button
playback related buttons
Skip : During playback, press the
During playback, press
this button to display the
Title menu.
The player does not play sound in
Search, Slow, or Step mode.
To return to normal speed playback,
or
button to move to the
TITLE mENU
button
2
3
1
2
previous or next file of the playlist.
●
button : Stops a track.
5
press the
button.
6
During playback, press
this button to display
the Pop-up menu.
pOpUp mENU
button
Fast play (Audio Cd (Cd-dA) only)
button
button
button
Starts playback.
6
5
7
During playback, press the
or
3
button.
4
Stops playback.
4
Each time you press the
or
4
3
Pauses playback.
button, the playback speed will
change.
During playback, press the
or
button.
3
4
pause : Pauses a track.
5
6
Fast motion
play
Each time you press the
3
button : Plays the currently
6
or
button, the playback
4
selected track.
speed will change.
18
NOTES
5. Use the ▲▼ buttons to select the
Repeat an Audio Cd (Cd-dA)/
mp3
✎
playlist
device to store the ripped files to,
■
You can create a playlist with up to
and then press the
button.
99 tracks on Audio CDs (CD-DA).
v
1. To move to the Music List, press
the ■ or RETURN button.
■
If you remove all the tracks from
NOTE
1. During Playlist playback, press the
✎
a play list and then press the
button, the player lists and plays all
the tracks on the disc.
v
TOOLS button.
The Music List screen appears.
■
Do not disconnect the device while
ripping is in progress.
1/2 page
CK 111
Tools
TRACK
Repeat mode
?
Off
\
TRACK 112
6. If you want to cancel ripping,
press the button, and then
12:38
Rip
Ripping
TRACK 113
v
>
move
<
Adjust
'
Return
12:38
TRACK 116
TRACK 115
TRACK 116
select yes. Select No to continue
ripping.
12:38
12:38
Lets you copy audio files from an
Audio CD (CD-DA) to a USB/HDD
device.
TRACK 117
TRACK 118
+
11:18 /
12:38
12:38
TRACK 119
TRACK 111
7. When ripping is complete, the
12:38
12:38
13:35
"Ripping is completed." message
"
pause c Select
Tools
'
Return
page
'
Return
Cd
Cd
a
Change device
1. Open the disc tray. Place the
audio (CD-DA) disc on the tray,
and close the tray. Insert a USB
device into the USB jack on the
front of the product.
appears. Press the
go back to the Playback screen
button to
v
.
2. Press the ▲▼◀▶ buttons to
2. Press the ◀▶ buttons to select
move to a desired track, and then
press the yELLOW (C) button. A
check appears on the track.
Repeat this procedure to select
additional tracks.
NOTES
✎
Track, All, Shuffle, or Off.
■
This function may not be
supported by some discs.
3. Press the
button.
v
2. In Stop mode, press the ▲▼◀▶
buttons to move to a desired
track, and then press the yELLOW
(C) button. A check appears on
the track.
■
On the Ripping screen, you can
Songs are played in
the order in which
they were recorded.
also choose Select All and deselect
3. To remove a track from the list,
move to the track, and then press
the yELLOW (C) button again.
The check on the track is cancelled.
Off
All
.
Use Select All to select all tracks.
This cancels your individual track
selections.
-
The current song is
repeated.
(
(
(
) Track
Repeat this procedure to select
additional tracks.
Use deselect All to deselect all
4. When done, press the
button.
-
v
selected tracks at once
.
) All
All songs are repeated.
The tracks you selected are
3. To remove a track from the list,
move to the track, and then press
the yELLOW (C) button again.
The check on the track is
cancelled.
displayed on the right side of the
screen. The player plays the first
track.
Shuffle plays songs in
random order.
) Shuffle
5. To change the play list, press the
■ button or RETURN button to
return to the Music List. Repeat
Steps 2, 3, and 4.
4. When done, press the TOOLS
button, and then select Rip using
the ▲▼ buttons, and then press
6. To cancel the play list and return
to the Home screen, press the
RETURN or ExIT button.
the
button. The Rip pop-up
v
appears.
19
However, the sound quality can be
affected by the bit rate of the MP3
file, the size of the photos, and the
encoding method.
5. Repeat Step 4 to select and check
Playing Photo Contents
disc Copy to USB
additional files.
Lets you copy video/photo/music
contents from a data disc to a
USB/HDD device.
6. To remove a file from the list,
move to the file, and then press
the yELLOW (C) button again.
The check on the file is removed.
You can control the playback of
photo content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer.
■
You can't enlarge the subtitle and
PG graphic in the full screen mode.
1. Open the disc tray. Place the data
disc on the tray, and close the tray.
Insert a USB device into the USB
jack on the front of the product.
The new device pop-up appears.
7. When done, press the TOOLS
button. Select Copy to USB using
the ▲▼ buttons, and then press
Using the Tools menu
Using Netflix
During playback, press the TOOLS
button.
You can use your Blu-ray player to
stream movies, TV shows, and other
video content from Netflix. To stream
content from Netflix, you must
connect your Blu-ray player to your
network. (See page 9.)
the
button. The Copy to USB
v
pop-up appears.
2. Press the ▲ button, and then
press the ◀▶ to select Blu-ray,
DVD or CD.
8. Use the ▲▼ buttons to select the
Start Slide Show/ Select to start or stop
Stop Slide Show the slide show.
device to store the copied files on,
and then press the
button.
v
3. Use the ▲▼ buttons to select
Slide Show
Speed
Select to set a slide
show's speed.
photos, Videos or music, and then
,
NOTE
✎
press the
button. The Photos,
v
■
Starting Netflix for the First Time
Do not disconnect the device while
copying is in progress.
Select to listen to music
while viewing a slide
show.
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both.
Background
music
1. On the Home screen, select Netflix
9. If you want to cancel copying,
press the button and then
and then press the
button.
v
v
Select to enlarge
NOTE
select yes. Select No to continue
copying.
✎
Zoom
the current picture.
(Enlarge up to 4 times)
■
If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to the
Terms of Service Agreement and the
Samsung Service Privacy Policy. You
must agree to both to continue. After
you have agreed to both, go to Step 2.
NOTE
✎
11. When copying is complete, the
■
Even though the player will display
Select to rotate the
picture. (This will rotate
the picture either
clockwise or counter
clockwise.)
"Copying is completed." message
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and repeating Step 3.
appears. Press the
button to
Rotate
v
go back to the Playback screen.
NOTES
✎
Shows the picture
information.
■
This function may not be
Information
NOTES
2. If you already have a Netflix account,
select Sign In, press the button,
supported by some discs.
v
■
On the Copying screen, you can
and then go to Step 6. If not, go to
✎
4. In Stop mode, use the ▲▼◀▶
buttons to select a file you want
to copy, and then press the
also choose Select All and deselect
Step 3.
■
Depending on the disc or storage
device, the Tools menu may differ.
All.
3. Enter your e-mail address by
selecting character, number, or
symbol keys on the screen using
the ▲▼◀▶ buttons, and then
Use Select All to select all item.
This cancels your individual item
selections.
-
■
To enable the background music
function, the photo file must be
in the same storage media as the
music file.
yELLOW (C) button. A check
appears to the left of the file.
Use deselect All to deselect all
-
pressing the
button.
v
selected item at once
.
21
4. When done, move the cursor to
3. Repeat Step 2 to select more
2. On the Pandora welcome screen,
if you have a Pandora account
Using YouTube
Next at the bottom of the screen,
letters or numbers.
and then press the
button.
v
select "I have a Pandora account",
4. As you add more letters, Netflix
will start to display matches in the
field on the right.
5. To move to the list of matches, press
the ▶ button one or more times.
6. To select a movie or video, highlight
You can use your Blu-ray player to
stream video content from YouTube.
To stream content from YouTube, you
must connect your Blu-ray player to
your network. (See page 9.)
5. Repeat the same process for the
Password field.
6. After you have entered your
password, select Next at the
bottom of the screen, and then
and then press the
button.
v
Go to Step 3. If you do not have a
Pandora account select "I am new
to Pandora" and then press the
button. Go to Step 6.
v
Starting youTube for the First
press the
button.
v
3. Enter your e-mail address and
password. Use the ▲▼◀▶
it and then press the
button.
v
Time
NOTES
✎
NOTE
✎
buttons to select a character, and
■
To return to the previous page,
press the Return button on your
remote.
■
1. On the Home screen, select
then press the
button.
Select the Delete button (with an
X) at the top of the screen to delete
the last character you entered.
v
YouTube, and then press the
button.
4. Repeat Step 3 to enter all the
characters in your e-mail address
and password.
5. When done, select Sign In at the
bottom of the screen, and then
v
■
To exit Netflix, press the Exit button
on your remote.
NOTE
✎
Using Pandora
■
If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to
the Terms of Service Agreement and
the Samsung Service Privacy Policy.
You must agree to both to continue.
After you have agreed to both, go
Selecting a movie or Video
press the
button.
v
You can use your Blu-ray player to
stream music from Pandora, free of
charge. To stream music from Pandora,
you must connect your Blu-ray player
to your network. (See page 9.)
6. If you do not have a Pandora
account, follow the directions on
the Pandora screen to create a
Pandora account.
Movies and videos on Netflix are
displayed in rows by category. To scroll
through a row, use the ◀▶ buttons.
To move up or down, from one row
to another, use the ▲▼ buttons. To
select a movie or video, highlight it,
Starting pandora for the First
Time
to Step 2
.
and then press the
button.
v
2. On the YouTube screen, use the
▲▼ buttons, to select popular
on youTube, Search, or Sign In
& Settings, and then press the
You can also search for movies and
videos by keywords - title, director’s
name, actor’s name, etc.
1. On the Home screen, select Pandora,
and then press the
button.
v
To search, follow these steps:
button.
v
NOTE
✎
1. Select the Search field at the top
■
popular on youTube displays the
currently Popular on YouTube
videos by category and lets you
If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to the
Terms of Service Agreement and the
Samsung Service Privacy Policy. You
must agree to both to continue. After
you have agreed to both, go to Step 2.
of the movie/video list screen, and
then press the
button.
v
2. Using the ▲▼◀▶ buttons, select
select a category
.
a letter or number, and then press
Search lets you search for videos
using key words or names.
the
button. The character you
v
selected appears at the top of the
field on the right.
21
Sign In & Settings lets you access
your YouTube account and send
videos from your tablet or smart
phone to your TV.
3. Press the ▼ button again.
The Current Play List appears
displaying individual videos in the
Current Play List.
6. To select a video, use the ▲▼◀▶
Finding and Selecting Other
Videos
buttons to highlight it, and then
press the
button. YouTube
v
plays the video.
Related Videos
4. Use the ◀▶ buttons to select
NOTES
✎
a video, and then press the
button.
v
■
1. With a video running and the
Control Panel displayed, press the
▼ button once. The Information
screen appears.
Select Clear at the top of the
playing and Controlling Videos
screen to clear all entered
characters.
The first video stops and the video
you selected plays.
1. To begin, select either popular on
■
Select the Delete button (with an
)
:
youTube or discover Channels,
at the top of the screen to delete
the last character you entered.
5. If you do not find a video you
want, press the Return or ▲
button to return to previous
screens.
2. In the Information screen, press
the ▼ button once. The Related
Videos category appears displaying
individual related videos.
and then press the
button.
v
2. Use the ◀▶ buttons to select
a category you want, and then
Sign In & Settings
press the
button. YouTube
v
3. Use the ◀▶ buttons to select
automatically starts the first video
in that category.
Sign In & Settings lets you access your
YouTube account and send videos
from your tablet or smart phone to
your TV.
Using Search
a video, and then press the
v
button. The first video stops and
the video you selected plays.
3. After the video starts, press the
1. On the YouTube Home screen,
button. The Control Panel
v
select Search, and then press the
4. If you do not find a video you want,
press the Return or ▲ button to
return to previous screens.
appears.
button.
v
Using Sign In & Settings
On the Control Panel you can
Pause, Rewind, Fast Forward, and
perform other operations on the
running video by using the ◀▶
buttons on your remote to select
the appropriate button on the
Control Panel, and then pressing
2. On the Search screen, use the ◀▶
To use Sign In & Settings, follow these
steps;
buttons to select a character, and
then press the
button. The
v
Current play List Videos
character you selected appears in
the field at the top.
1. On the YouTube Home page,
1. With a video running and the
Control Panel displayed, press the
▼ button once. The Information
screen appears.
select Sign In & Settings, and
3. Repeat Step 2 to select more
then press the
button.
v
letters or numbers.
the
button on the remote.
v
2. On the Sign In & Settings page,
use the ◀▶buttons to select
either Sign In or Pair, and then
4. As you add more characters,
YouTube will start to display
matches in the field on the right.
This may take some time.
2. In the Information screen, press
the ▼ button once. The Related
Videos category appears displaying
individual related videos.
press the
button.
v
3. Follow the directions on the
5. To move to the list of matches,
press the ▶ button one or more
times.
screen.
22
PROBLEM
SOLUTION
Appendix
~
~
If you experience other
problems.
Go to the table of contents and find the section of the user
manual that contains information about the feature you are having
the problem with, and then follow the procedure again.
Troubleshooting
If you still cannot resolve the problem, please contact Samsung
Customer Support at the phone number listed on the last page of
this manual.
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
dLNA function
~
I can see folders shared through
DLNA, but I cannot see the files.
DLNA shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not displayed.
~
No operation can be performed
with the remote control.
Check the batteries in the remote control. They may need replacing.
Operate the remote control at a distance of no more than 20 feet from the player.
Remove the batteries, and then hold down one or more buttons for
several minutes to drain the microprocessor inside the remote control to
~
~
~
~
Video is played intermittently.
Check if the network is stable.
Check if the network cable is properly connected and if the network is overloaded.
reset it. Reinstall the batteries and try to operate the remote control again
.
~
~
The DLNA connection between
the Player and PC is unstable.
IP addresses within the same subnetwork should be unique. If they
are not, IP interference can cause this phenomenon.
Check if you have a firewall enabled. If so, disable the firewall function.
~
~
The disc does not play.
Ensure that the disc is installed with the label side facing up.
Check the region number of the Blu-ray Disc/DVD.
~
Bd-LIVE
The Disc Menu does not appear.
Ensure that the disc has disc menus.
~
~
~
~
I cannot connect to the BD-LIVE
server.
Check whether the network connection is working or not by
accessing Network Status in Network Settings (Settings > Network
Settings > Network Status).
Check whether the USB memory device is connected to the player.
The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
The prohibition message
appears on the screen.
This message appears when an invalid button is pressed.
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
You’ve requested a title or chapter number or search time that is out of range.
~
~
~
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if those functions are not encoded on the disc.
You can check the available size in BD Data Management.
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
If all above fails, contact the content provider or update the player
to the latest firmware.
~
You cannot change the screen
aspect ratio (screen size).
The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot
be changed.
This is not a problem with the player.
~
~
~
~
No audio.
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
~
When using the BD-LIVE
service, an error occurs.
The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
~
~
~
The screen is blank.
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
^
Press the button (on the front panel) for more than 5 seconds with no
NOTES
✎
disc inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data is
deleted.
■
When the factory default settings are restored, all stored user BD data is deleted.
Repairs
~
^
Forgot password
Press the button (on the front panel) for more than 5 seconds
with no disc inside. All settings including the password will revert
to the factory settings.
Don’t use this unless absolutely necessary.
If you contact us to repair your player, an administration fee may be charged if either:
~
11 An engineer is called out to your home at your request and there is no defect in the product.
When the factory default settings are restored, all stored user BD data is deleted.
21 You bring the unit to a repair center and there is no defect in the product.
~
~
The picture is noisy or distorted
No HDMI output.
Make sure that the disc is not dirty or scratched.
Clean the disc.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manual thoroughly, search for a solution on line at
seeking to repair your player.
~
~
Check the connection between the TV and the HDMI jack of the player.
Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input resolutions.
~
Abnormal HDMI output screen.
If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
23
Compliance and Compatibility Notice
Specifications
NOT ALL discs are compatible
Power Requirements
AC110-120V 50/60Hz
10.8W
●
Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
Power Consumption
Weight
2.2 Ibs
●
Discs other than those listed above cannot be and are not intended to be played by this player.
General
Some of the discs listed above may not play due to one or more reasons provided below.
Dimensions
11.4 (W) X 8.7 (D) X 1.5 (H) inches
+41°F to +95°F
10 % to 75 %
●
Samsung cannot guarantee that this player will play every disc bearing the BD-ROM, BD-
Operating Temperature Range
Operating Humidity Range
Type A
RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may
not respond to all operating commands or operate all features of every disc. These and
other disc compatibility and player operation issues with new and existing format discs are
possible because:
USB 2.0
Blu-ray is a new and evolving format. This player may not operate all Blu-ray features
-
USB
DC output
5V 0.5A Max.
because 1.) some features may be optional, 2.) additional features may have been added
to the Blu-ray Disc format after the production of this player, and 3.) certain features may
be subject to delayed availability;
Video
1080p, 1080i, 720p, 480p
PCM, Bitstream
Coaxial
HDMI
not all new and existing disc format versions are supported by this player;
new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-
Audio
-
Audio Output
Network
Digital Audio Output
Ethernet
some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-
100BASE - TX Terminal
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
some discs may not be played depending on their physical state or recording conditions;
problems and errors can occur during the creation of Blu-ray Disc or DVD software
and/or the manufacture of discs;
this player operates differently than a standard DVD player or other AV equipment;
and/or
-
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
Weight and dimensions are approximate.
-
-
-
-
-
-
Dispose unwanted electronics through an approved recycler.
recyclingdirect or call, (877) 278 - 0799
-
for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care center.
-
●
If you encounter disc compatibility or player operation problems, please contact the
SAMSUNG customer care center.
You may also contact the SAMSUNG customer care center for possible updates to this player.
●
For additional information on playback restrictions and disc compatibility, refer to the
following sections of this users' manual : Precautions, Before reading the user manual, Disc
Types and Characteristics, and Before Playing.
●
For Blu-ray disc player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
24
WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A
RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Copy protection
●
Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analog signal output, etc., of
AACS protected contents.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care center.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
●
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
●
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
License
●
Manufactured under license from Dolby Laboratories. Dolby and the
●
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies
double-D symbol are trademarks of Dolby Laboratories.
of some commercially-produced film and videos and their soundtracks. When a prohibited
use of an unauthorized copy is detected, a message will be displayed and playback or
copying will be interrupted. More information about Cinavia technology is provided at
additional information about Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance
●
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited
.
●
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Network Service disclaimer
All content and services accessible through this device belong to third parties and are protected
by copyright, patent, trademark and/or other intellectual property laws. Such content and
services are provided solely for your personal noncommercial use. You may not use any content
or services in a manner that has not been authorized by the content owner or service provider.
Without limiting the foregoing, unless expressly authorized by the applicable content owner
or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell,
create derivative works, exploit, or distribute in any manner or medium any content or services
displayed through this device.
●
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
●
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the
product menu.
-
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY
PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR
COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE
AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE,
●
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
●
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) year parts and Labor*
(*91 days parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the
purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product
to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license
agreement. Non-SAMSUNG hardware and software products, if provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement,
noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses
for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature;
use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by
SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and
distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact the SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller.
THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES
WHERE SUCH RESTRICTION MAY BE PROHIBITED.
QUESTIONS OR COMMENTS?
COUNTRy
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road
1-800-SAMSUNG
(726-7864)
IN THE US
Ridgefield Park, NJ 07660
© 2014 Samsung Electronics Co.,Ltd. All rights reserved
|