®
professional
power blender
Instruction Booklet
Model: BL-1051
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician. DO NOT modify the plug in any way or use
an adaptor.
1
2
DESCRIPTION OF PARTS
1. Safety Locking Pin
2. Filler Cap
3
4
5
3. Lid
7
4. Glass Blender Jar
5. Cutting Blade Assembly
6. Jar Base
7. Safety Lock Release Button
8. Safety Locking Pin Slot
9. Safety Locking Handle
10. Blender Base
11. Control panel
a) Pulse/Ice Crush
b) Hi
6
8
9
10
11a
c) Low
d) Off
11c
11d
11b
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Press the Safety Lock/Release button. Gently push the handle backwards.
4. Lift the Blender Jar upwards (do not twist or turn). Wash the Blender
Jar, Lid and Filler Cap in warm soapy water. NOTE: For safety purposes
the Cutting Blade Assembly is designed so it cannot be removed from
the Blender Jar. IMPORTANT: Use extreme caution when cleaning
Blender Jar by hand as the blades are very sharp.
5. Rinse, dry and reassemble making sure that the handle of the Blender
Jar is aligned with the right edge of the Blender Base.
3
6. Wipe the Blender Base with a damp cloth.
DO NOT IMMERSE THE BLENDER BASE IN WATER OR ANY OTHER
LIQUID.
DO NOT use harsh detergents or abrasive cleaners on any part of
the appliance.
Speed Settings
Low – for mixing and light blending including drinks, sauces, scrambled eggs
and berries
High – for heavier mixing such as whole fruit, soups, mayonnaise and solid
ingredients
Pulse/Ice Crush – for quick bursts of power and to crush ice
HOW TO USE
1. Place the Blender Jar securely on the Blender Base making sure that the handle
of the Blender Jar is aligned with the right edge of the Blender Base.
2. Plug into a 120V AC wall outlet.
3. Add ingredients and replace the Lid by aligning the arrow on the Lid with
the arrow indicated above the handle of the Blender Jar. IMPORTANT: If
the Lid is not installed properly, the Safety Lock Pin will not fit into the
Safety Lock Pin Slot.
4. Raise the Safety Locking Handle over the Lid and secure the Safety Lock Pin
into Safety Lock Pin Slot. The Safety Locking Handle will ‘click’ into place and
the red ‘Power’ light will illuminate indicating the blender is now ready for use.
NOTE: If the Safety Locking Handle has not been secured in place properly and
the red ‘Power’ light does not illuminate, the blender will not operate.
5. Press the desired blending speed.
6. When the ingredients have been blended, press the ‘OFF’ button. Unplug from
the wall outlet and push the Safety Lock/Release button to lower the Safety
Locking Handle.
7. Remove the Blender Jar by lifting up - do not twist. NOTE: Wait until the
Cutting Blades have stopped before removing the Blending Jar.
4
HELPFUL HINTS
•
•
•
Allow hot liquids to cool to a lukewarm temperature before processing.
Always place your hand on top of the Safety Handle when operating.
While the motor is running, ingredients can be added through the Filler
Cap opening in the center of the Blender Lid.
•
•
DO NOT operate the Blender for more than 90 seconds when processing
dry ingredients.
DO NOT run the Blender when empty.
CARE AND CLEANING
1. Unplug from wall outlet.
2. Remove Blender Jar from Blender Base. NOTE: For safety purposes the Cutting
Blade Assembly is designed so it cannot be removed from the Blender Jar.
3. Empty the Blender Jar completely. Rinse the inside of the Blender Jar with
water to dislodge any food that may be stuck to the Cutting Blades.
4. Add a small amount of dishwashing liquid into the Blender Jar and fill
halfway with water.
5. Put the Blender Jar back on the Blender Base, raise Safety Locking Handle
and blend on ‘LOW’ speed for 30 seconds.
6. Remove Blender Jar from Blender Base, rinse Blender Jar with clean water
and then repeat with clean running water only. Air dry Blender Jar thoroughly
and ensure that the inside of the Blender Jar is completely dry before storing.
IMPORTANT: Use extreme caution when cleaning Blender Jar by hand as the
blades are very sharp.
7. Wash the Lid and Filler Cap in warm soapy water. Rinse, air dry thoroughly
and reassemble.
8. Wipe the Blender Base with a damp cloth. If necessary, you can use a little
mild detergent. DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
DO NOT use harsh detergents or abrasive cleaners on any part of the appliance.
5
RECIPES
Raspberry Salad Dressing
1/2 cup (125g)
2 tbsp. (30 ml)
2 tbsp. (30 ml)
1 tsp. (5 ml)
fresh or frozen raspberries, thawed
vegetable oil
Balsamic vinegar
chopped mint
2 tsp. (10 ml)
sugar (add up to 1 tbsp. (15 ml) depending on sweetness
of raspberries)
Place raspberries into Blender Jar. Blend on Low speed until smooth. If desired,
push through a sieve to remove seeds. Return raspberry puree to Blender Jar
and add oil, vinegar, mint and sugar. Pulse until combined.
Avocado Salad Dressing
1 tbsp. (15 ml)
3 tbsp. (45 ml)
lemon juice
plain yogurt
1/2 cup (125 ml) sour cream
1 tsp. (5 ml)
1/2 tsp. (5 ml)
1
honey
crushed garlic
avocado, peeled, stoned and chopped
Add all ingredients to the Blender Jar. Blend on high speed until smooth.
Crepes with Strawberry Sauce
1-1/4 cups (310 ml) milk
1 cup (250 ml)
2
all purpose flour
eggs
1 tbsp. (15 ml)
melted butter or margarine
Place milk, flour eggs and butter in the Blender Jar. Blend on high speed until
smooth. Pour 1/4 cup (60 ml) batter into a non-stick frying pan and cook over
a medium heat until golden brown. Turn and cook for 30 seconds longer. Remove
from pan and keep warm. Repeat with remaining mixture.
6
Strawberry Sauce
1/2 lb. (225 g) strawberries, fresh or frozen
1/4 cup (60 ml) icing sugar
2 tbsp. (30 ml) Grand Marnier
2 tbsp. (30 ml) water
Place strawberries, icing sugar, Grand Marnier and water into the Blender Jar.
Blend until smooth on high speed. Pour over crepes. If desired, top with a few
sliced strawberries, a dollop of whipped cream and sprinkle with icing sugar.
Banana Shake
2 cups (500 ml) milk
2
bananas, peeled and cut in chunks
1/4 cup (60 ml) yogurt
1 tbsp. (15 ml) honey
1 tsp. (5 ml)
lemon juice
1 cup (250 ml) ice cubes
nutmeg - garnish
Place milk, bananas, yogurt, honey, lemon juice and ice cubes in Blender Jar.
Blend on high speed until well combined and ice is crushed. If necessary, Pulse
a few times to crush ice. Pour into glasses and sprinkle with nutmeg.
Strawberry Daiquiri
2 tbsp. (30 ml) white rum
1/4 cup (60 ml) lime juice
1 tbsp. (15 ml) sugar
2 cups (500 ml) strawberries
2 cups (500 ml) ice cubes
Place rum, lime juice, sugar, strawberries and ice cubes into Blender Jar.
Pulse until ice is crushed and ingredients are combined. Pour into glasses.
7
Margarita
2 tbsp. (30 ml) Tequila
2 tbsp.
Triple Sec
1 cup (250 ml) lime juice
2 cups (500 ml) ice cubes
Place tequila, Triple Sec, lime juice and ice cubes into Blender Jar. Pulse until
ice is crushed and ingredients are combined. Pour into glasses..
Peach Smoothie
4
ripe peaches, halved, pitted and peeled
1/4 cup (60 ml) peach yogurt
1 tbsp. (15 ml) honey
1 tsp. (5 ml)
6
vanilla extract
ice cubes
Place peaches, peach yogurt, honey, vanilla extract and ice cubes in blender. Pulse
until desired consistency is reached. Pour into glasses and serve immediately.
Frozen Yogurt
2-1/2 cups (600 g) unsweetened frozen peaches or frozen strawberries
or frozen blueberries
1 cup (250 ml)
1 cup (250 ml)
1 tbsp. (15 ml)
container plain yogurt
confectioners' sugar
lemon juice
1/8 tsp. (0.5 ml) almond extract
Allow frozen fruit to stand at room temperature for 10 minutes. Place fruit,
yogurt, confectioners’ sugar, lemon juice and almond extract in blender. Blend
on high until mixture is smooth and creamy.
8
Applesauce
4
large apples cored and peeled
1/4 cup (60 ml) apple juice
3 tbsp. (45 ml) honey
1/2 tsp. (2.5 ml) cinnamon
1 tsp. (5 ml)
lemon juice
Place apples, apple juice, honey, cinnamon and lemon juice in blender. Blend on
high speed about 2 minute or until mixture is smooth. Serve immediately.
Peanut Butter
2 cups (450 g) roasted peanuts
1 tbsp. (15 ml) peanut oil
1/2 tsp. (5 ml)
salt (omit if salted peanuts are used)
Place peanuts in blender and blend on high until powdery. Add peanut oil and
salt and blend until desired consistency is reached. Store leftovers in fridge for
up to 2 weeks.
Slushies
1/2 cup (125 ml) sweetened Kool-Aid or Crystal light drink mix
3 cups (750 ml) ice
Place ice cubes and drink mix in blender. Pulse until desired consistency is
reached. Serve immediately. Store leftover in the freezer.
NOTE: More or less ice can be used depending on the desired consistency
9
A short supply cord is provided to reduce the hazards of becoming entangled in or
tripping over a long cord. Extension cords may be used if care is exercised in their
use. If an extension cord is used, the marked electrical rating of the detachable
power-supply cord or extension cord should be at least as great as the electrical
rating of the appliance. If the appliance is of the grounded type, the extension
cord should be a grounded 3-wire cord. The extension cord should be arranged so
that it will not drape over the counter top or table top, where it can be pulled on
by children or tripped over.
LIMITED WARRANTY
Salton Canada warrants that this appliance shall be free from defects in material
and workmanship for a period of one year from the date of purchase. During this
‘in-warranty’ period, defective products will be repaired or replaced at the discretion
of the retailer and/or Salton Canada. This warranty covers normal domestic usage
and does not cover damage which occurs in shipment or failure which results from
alteration, accident, misuse, abuse, glass breakage, neglect, commercial use or
improper maintenance.
A defective product should be returned to the original place of purchase within the
retailer’s stipulated return/exchange period*. If you are unable to have a defective
product replaced under warranty by the retailer, please check our website at
assistance by mail, e-mail, fax or telephone as listed below.
To ensure prompt ‘in-warranty’ service securely package and return the product to
us prepaid. Be sure to include the original proof of purchase and a description of the
defect along with your address and postal code.
For repairs not covered by the warranty, please contact us for assistance.
®
SALTON CANADA
Customer Service Department
81A Brunswick
Dollard-des-Ormeaux
Quebec, Canada H9B 2J5
E-mail: [email protected]
Fax: 514-685-8300
Tel: 514-685-3660
* Return/exchange policies at each retailer vary and may differ from the Salton Canada 1 year limited
warranty period.
10
|