2-Port Serial PCI Adapter RC301
User Manual
2-Port Serial PCI Adapter RC301
User Manual
and attempt to install driver for it.
1.
2.
Start Windows 95/98/2000/XP
The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O
Card”. Click the “Next” button.
3.
4.
5.
Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the
driver.
Insert the driver CD in CD-ROM drive (D) and click on the “Browse” button.
Windows 98/95/2000 will automatically locate the driver in the driver diskette. Click the
2
2-Port Serial PCI Adapter RC301
User Manual
“OK” button to continue.
6.
7.
Click on the finish button to start copying files from driver diskette.
Windows 98/95/2000 will automatically restart in order to update the hardware
configuration.
8.
Once Windows 98/95/2000 has restarted, you can now connect your external devices to
the PCI I/O card. To install the driver for the external devices, please refer to the external device
user’s manual.
Windows NT 4.0
Make sure Windows NT 4.0 is properly installed into your system first.
1.
2.
3.
4.
5.
Start Windows NT.
Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
Select “RUN” option in Windows NT.
At the “RUN” option, click on the“Browse” button.
At the Browse for Folder window:
Select “Floppy (A)”
Double click on the winnt folder
Select NetMosXXX drivers.exe
Click on the Open button
6.
7.
Finally, click the“OK” button
Follow the instructions to finish up the driver installation. Your system will automatically
3
2-Port Serial PCI Adapter RC301
User Manual
restart in order to complete the driver installation.
Installing DOS Driver
Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”
Update Drivers
Thank you for purchasing Rosewill Product.
support for your product.
4
|