PTSVNWU
7Bꢀꢁꢁ
6;9;F3>ꢂB;3@A
7XUER6WDUW
It’s a Fact…
Layering two instrument sounds
The Roland EP-77, Digital Piano is beautifully
designed for entry-level players:
Use the following procedure to layer two instrument
sounds:
1) [PRESS] and [HOLD] a Sound/Tone button.
2) Press another Sound/Tone.
3) To [CANCEL] layer function, press any Sound
button.
•
•
•
•
•
76 weighted keys
MIDI Capability
Two Headphone Jacks
“Stereo” Piano Sound
Full 64-Polyphonic Voices
(Refer to Owner’s Manual-page 10.)
Adjusting the volume
Use the following procedure to adjust the volume:
Recording a Song
Use the following procedure to Record a Song:
1) [Turn] the volume knob, located to the right of the
power switch, to adjust the volume.
1) In the metronome section press the [Sound]
button and select a [Sound/Tone]. (Sound/Tone
list page 10.)
(Refer to Owner’s Manual-page 7, for “Adjusting
the volume”.)
2) [PRESS] the [ON/OFF] button in the metronome
section.
Selecting a Sound/Tone
3) Select a [TEMPO].
Use the following procedure to select any of the eight
Sound/Tone:
4) Use the [BEAT] knob to select the time of the
song.
2) [PRESS] a desired Sound/Tone.
5) Press the [RECORD] button. (Recording will start
when you begin to play.)
(Refer to Owner’s Manual-page 10, for “Selecting
Sounds/Tone”.)
6) To [STOP] recording, press [PLAY].
7) To hear your recording, press [PLAY].
Listening to the Demonstration Songs
Use the following procedure to listen to one of the
eight Demo Songs:
(Refer to Owner’s Manual-page 12 & 13, for
“Recording and Listening to the recorded
performance”. )
1) [PRESS] the Demo button.
2) Press the [PLAY] button.
Transposing
Use the following procedure to Transpose:
1) Press and hold the [Demo] button.
2) Use the [C2] ~ [B2] notes to select a key.
3) To [STOP] the demo song playback, press the
[DEMO] button.
(Refer to Owner’s Manual-page 8, for “Listening to
demo songs and song list”.)
(Refer to Owner’s Manual-page 14, for
“Transposing” information and page 22 for
“Functions assigned to the keyboard”.)
Adding Reverb and Chorus
Use the following procedure to select Reverb:
1) [PRESS] the Reverb button.
2) To [CANCEL] press the Reverb button.
(Refer to Owner’s Manual-page 10, for “Adding
Reverb”.)
© 2000 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040
Faxback # 20122
|