HPC2204
HPC2205
HPC2206
HPC2206U
HPC2246
HPC2257
HPC2268
HPC2369
Installation &
Operation
High Performance
Full Range Speakers
Installation et fonctionnement
Instalación y funcionamiento
Einbau und Betrieb
Installazione e funzionamento
GETTING STARTED
Welcome
to
Rockford
Fosgate!
This
manual
is
designed
to
provide
information for the owner, salesperson and installer. For those of you who want quick information
on how to install this product, please turn to the Installation Section of this manual. Other
information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked
very hard to make sure all the information in this manual is current. But, as we are constantly
finding new ways to improve our product, this information is subject to change without notice.
SAFETY INSTRUCTIONS
This symbol with “WARNING” is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions will result in severe injury or death.
This symbol with “CAUTION” is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.
CAUTION: To prevent injury and damage to the unit, please read and follow the
!
instructions in this manual. We want you to have enjoyment from this
system, not a headache.
CAUTION If you feel unsure about installing this system yourself, have it installed
!
!
by a qualified Rockford Fosgate technician.
CAUTION Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
CONTENTS OF CARTON
One (1) Pair of Full Range Speakers
20' (6.1m) of 18 gauge Speaker Wire
Installation & Operation Manual
Mounting Hardware
One (1) Pair of Grilles (HPC2204,
HPC2205, HPC2206, HPC2206U, and
HPC2369 Only)
Visit our web site for the latest information on all Rockford products.
3
INSTALLATION
INSTALLATION CONSIDERATIONS
The following is a list of tools needed for installation:
#2 Phillips screwdriver
Battery post wrench
Wire strippers
Wire crimpers
Wire cutters
Hand held drill w/assorted bits
Since some of these Punch High Performance Full Range Speakers are most often used as direct
replacements for stock speakers and are shipped without grilles, some of the following instructions
will not apply. For custom installations see your Authorized Rockford Fosgate Dealer.
CAUTION: If you feel unsure about installing this system yourself, have it installed
!
by a qualified Rockford Fosgate technician.
CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent
!
damage to the unit, fire and/or possible injury.
Before beginning any installation, follow these simple rules:
1. Be sure to carefully read and understand the instructions before attempting to install the Unit.
2. For safety, disconnect the negative lead from the battery prior to beginning the installation.
3. For easier assembly, we suggest you run all wires prior to mounting your Unit in place.
4. Use high quality connectors for a reliable installation and to minimize signal or power loss.
5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic
lines, vacuum lines or electrical wiring when working on any vehicle.
6. Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best
protection.
7. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any
wires routed through metal, especially the firewall.
MOUNTING
1. Determine where the speakers will be mounted. Ensure an area large enough for the speaker to
mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mount-
ing in a door, operate all functions (windows, locks, etc.) through their entire operating range to
ensure there is no obstruction.
2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker
model.
3. Using the plastic mounting ring as a template, mark the locations for the mounting screws. Drill
the holes with a 1/8" bit.
4. Feed the speaker wires through the cutout and the plastic mounting ring (from the flat side) and
connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires.
The speaker's positive terminal is indicated with a "+".
5. Fit the ring and speaker to the cutout. Mount them using the enclosed screws. Fit the grille
inside the ring and press gently, but firmly, into place.
4
INSTALLATION
Mounting Hole,
Cut-Out
Speaker
Mounting Ring
Grille
Example of standard door installation
Grille
Mounting Ring
Rear Deck
Cut-Out
Gasket
Speaker
Example of 6" x 9" rear-deck installation
5
SPECIFICATIONS
FEATURES - All Models
•
•
Cone (polypropylene) ; titanium plated
Surround ; butyl
•
Tweeter/Midrange ; Polyethylene
Model
HPC2204
4
HPC2205
5
HPC2206
6.5
HPC2206U
6
Nominal Diameter (inch)
Nominal Diameter (mm)
Description
101.6
127
165.1
152.4
2-way
4Ω
2-way
4Ω
2-way
2-way
Nominal Impedance (ohms)
Frequency Response
Sensitivity (SPL@1w/1m)
4Ω
4Ω
45Hz-24kHz
86dB
40Hz-24kHz
89dB
35Hz-24kHz
89dB
40Hz-24kHz
92dB
Power Handling
(Watts RMS/Peak)
40/80
60/120
75/150
75/150
Installation
Speaker Grilles
X
3-21/32
93
X
X
X
5-1/16
129
Mounting Diameter (inch)
Mounting Diameter (mm)
Mounting Depth (inch)
Mounting Depth (mm)
4-1/2
114
2-3/8
60
5-21/32
144
2
2-19/32
66
1-27/32
47
51
Model
HPC2246
4 x 6
HPC2257
5 x 7
HPC2268
6 x 8
HPC2369
6 x 9
Nominal Diameter (inch)
Nominal Diameter (mm)
Description
101.6 x 152.4
2-way
127 x 177.8
2-way
152.4 x 203.2
2-way
152.4 x 228.6
3-way
Nominal Impedance(ohms)
Frequency Response
Sensitivity (SPL@1w/1m)
4Ω
4Ω
4Ω
4Ω
50Hz-24kHz
89dB
40Hz-24kHz
91dB
40Hz-24kHz
91dB
30Hz-24kHz
89dB
Power Handling
(Watts RMS/Peak)
40/80
75/150
75/150
100/200
Installation
Speaker Grilles
—
—
—
X
Mounting Diameter (inch) 4-3/32 x 6-3/16
5 x 7-1/8
127 x 181
2-1/2
5-3/16 x 7-7/16 6-5/32 x 8-9/16
Mounting Diameter (mm)
Mounting Depth (inch)
Mounting Depth (mm)
104 x 157
2 1/4
132 x 189
2-1/2
156 x 218
3-3/32
78.5
57
63.5
63.5
Specifications subject to change without notice
6
LIMITED WARRANTY INFORMATION
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the
following terms:
Length of Warranty
PUNCH Amplifiers – 2 years
All Other Amplifier Models – 3 years
Source Units – 1 year
Speakers – 1 year
90 days on speaker, amplifier and source unit B-stock (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized
Rockford Fosgate Dealers in the United States of America or its possessions. Product
purchased by consumers from an Authorized Rockford Fosgate Dealer in another country
are covered only by that country’s Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an
Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the
purchaser must provide Rockford with a copy of the receipt stating the customer name,
dealer name, product purchased and date of purchase.
Products found to be defective during the warranty period will be repaired or replaced
(with a product deemed to be equivalent) at Rockford's discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations, water, theft
2. Any cost or expense related to the removal or reinstallation of product
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate
Service Center
4. Any product which has had the serial number defaced, altered, or removed
5. Subsequent damage to other components
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are
limited in duration to the period of the express warranty set forth above. Some states do not
allow limitations on the length of an implied warranty, so this limitation may not apply. No
person is authorized to assume for Rockford Fosgate any other liability in connection with
the sale of the product.
How to Obtain Service
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA#
(Return Authorization number) to return any product to Rockford Fosgate. You are
responsible for shipment of product to Rockford.
Ship to: Electronics
Ship to: Speakers
Rockford Corporation
Warranty Repair Department
2055 E. 5th Street
Rockford Acoustic Design
Speaker Returns
2356 Turner Ave. NW
Grand Rapids, MI 49544
RA#: ____________________
Tempe, AZ 85281
RA#: _________________________
7
Rockford Fosgate
Rockford Corporation
546 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
In U.S.A., (480) 967-3565
In Europe, Fax (49) 8503-934014
In Japan, Fax (81) 559-79-1265
11/01 B.M.
LIT11659
Printed in China
|