Rinnai Water Heater R98EASME User Guide

R98eASME (V3237W-ASME)  
R
This model has been built in accordance with the requirements of  
the ASME Boiler and Pressure Vessel Code and has received the  
Certificate of Authorization from the National Board. The heat  
exchanger has the NB and the HLW stamps.  
Temperature controlled, continuous flow, gas hot water system  
REU-V3237W-ASME  
Type of Appliance  
Rinnai model number  
Operation  
Forced combustion  
19,000 - 237,000 BTU/h (Natural Gas or Propane)  
Minimum/Maximum Gas Rate (Input)  
Electrical  
Appliance:  
Controller:  
AC 120 Volts - 60 Hz  
DC 12 Volts  
Normal  
Standby  
72 watts  
2 watts  
Electrical Consumption  
Anti-frost protection  
116 watts  
Direct electronic ignition  
0.6 to 8.0 GPM (50° F rise)  
98° - 140° F  
Ignition System  
0.9 to 9.8 GPM (35° F rise)  
Hot Water Capacity  
Temperature  
120° F (factory default)  
Temperature (without controller)  
Approved Gas Types  
Installation  
Natural or Propane (ensure unit matches gas type)  
Outdoor only  
Natural Gas: 85%  
Propane: 83%  
Thermal Efficiency  
Service Connections  
Gas supply: 3/4 inch MNPT  
Cold water inlet: 3/4 inch MNPT  
Hot water outlet: 3/4 inch MNPT  
Water flow sensor, electronic water control and by-pass control  
15 - 150 PSI (50 PSI or above is recommended for maximum flow)  
Water Flow Control  
Minimum/Maximum Water Supply Pressure  
3237W-ASME SP-1  
4/2008  
© 2008 Rinnai Corporation  
 

Radio Shack Cordless Telephone 43 3549 User Guide
Radio Shack TV Antenna U 120XR User Guide
Riccar Vacuum Cleaner RSL1A User Guide
Roberts Radio Radio RD 8 User Guide
Samsung Computer Monitor 172S User Guide
Samsung Digital Camera U CA 501 User Guide
Samsung DVD Player DVD VR357 User Guide
Sanus Systems TV Mount VLT14 User Guide
Sanyo Cell Phone SCP 8300 User Guide
Scag Power Equipment Lawn Mower SW 20KHE User Guide