ResMed Sleep Apnea Machine ApneaLink Plus User Guide

ApneaLink™ Plus  
Patient Kit Instructions  
English  
Getting started  
Before fitting, lay out all the system components and read these instructions first.  
Note: Wear ApneaLink Plus and belt over pajamas or nightshirts with long sleeves, to avoid any  
discomfort from the belt.  
Fitting  
Recorder and sensor  
1
2
Thread the belt through the brackets of the ApneaLink Plus and the  
effort sensor. Fix the Velcro® fastener on the belt and move the  
recorder to a comfortable position.  
Wear the belt with recorder.  
The easiest way to put on the  
device is while standing in front  
of a mirror.  
Nasal cannula  
5
3
4
Fit the nasal pressure cannula so that  
the two small open tubes point towards your ears and then  
your nostrils. When doing this, ensure  
that the ends point downwards.  
Fit the loop around  
Draw the cannula to a comfortable  
position under your chin. If tape or  
adhesive pads have been provided  
place them as indicated to help  
secure the cannula.  
back around your neck,  
without pulling over  
your head.  
Finger pulse sensor  
Oximeter  
7
6
Insert the index finger into the sensor. The finger  
must reach the end of the sensor.  
Fit the pulse oximeter into the clip-on holder.  
 

RCA Flat Panel Television F32TF600 User Guide
RCA Portable DVD Player DRC99370U User Guide
Roberts Radio Portable Radio RP16 User Guide
Rotel Car Stereo System RDA975 User Guide
Russell Hobbs Microwave Oven RHM2013 G User Guide
Saeco Coffee Makers Espresso Maker Odea Giro User Guide
Samsung Digital Camera CX4 User Guide
Samsung Telephone SCH i700 Series User Guide
Sanyo Flat Panel Television DP55441 User Guide
Schwinn Exercise Bike 122 User Guide