HD74LV1GWU04A
Dual Unbuffer Inverter
REJ03D0074-0200
Rev.2.00
May 19, 2006
Description
The HD74LV1GW04A has dual inverter in a 6 pin package. Low voltage and high-speed operation is suitable for the
battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
•
•
•
The basic gate function is lined up as Renesas uni logic series.
Supplied on emboss taping for high-speed automatic mounting.
Electrical characteristics equivalent to the HD74LV04A
Supply voltage range : 1.65 to 5.5 V
Operating temperature range : –40 to +85°C
•
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
•
•
•
Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
All the logical input has hysteresis voltage for the slow transition.
Ordering Information
Package Code
(Previous Code)
PTSP0006JA-A
(CMPAK-6V)
Package
Taping Abbreviation
(Quantity)
Part Name
Package Type
Abbreviation
HD74LV1GWU04ACME CMPAK-6 pin
CM
E (3,000 pcs / Reel)
Outline and Article Indication
• HD74LV1GWU04A
Index band
Marking
W 6
= Control code
CMPAK–6
Function Table
Input A
Output Y
H
L
L
H
H : High level
L : Low level
Rev.2.00, May 19, 2006 page 1 of 5
HD74LV1GWU04A
Electrical Characteristic
•
Ta = –40 to 85°C
Item
Symbol
VCC (V) *
Min
Typ
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Max
—
Unit
Test condition
1.65 to 1.95 VCC×0.85
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
Min to Max
1.65
VCC×0.8
VCC×0.8
VCC×0.8
—
—
VIH
—
—
Input voltage
V
VCC×0.15
VCC×0.2
VCC×0.2
VCC×0.2
—
—
VIL
—
—
VCC–0.1
1.4
IOH = –50 µA
—
IOH = –1 mA
IOH = –2 mA
IOH = –6 mA
IOH = –12 mA
IOL = 50 µA
IOL = 1 mA
VOH
2.3
2.0
—
3.0
2.48
3.8
—
4.5
—
Output voltage
Input current
V
Min to Max
1.65
—
0.1
—
0.3
VOL
2.3
—
0.4
IOL = 2 mA
3.0
—
0.44
0.55
±1
IOL = 6 mA
4.5
—
IOL = 12 mA
VIN = 5.5 V or GND
IIN
ICC
CIN
0 to 5.5
—
µA
µA
pF
Quiescent
supply current
VIN = VCC or GND,
IO = 0
5.5
3.3
—
—
—
10
—
Input capacitance
4.0
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.2.00, May 19, 2006 page 3 of 5
HD74LV1GWU04A
Switching Characteristics
•
VCC = 1.8 ± 0.15 V
Ta = 25°C
Typ
Ta = –40 to 85°C
Test
Conditions
FROM
(Input) (Output)
TO
Item
Symbol
Unit
Min
—
Max
15.0
24.0
Min
1.0
1.0
Max
18.0
27.0
8.0
CL = 15 pF
CL = 50 pF
Propagation
delay time
tPLH
tPHL
ns
A
Y
—
15.2
•
VCC = 2.5 ± 0.2 V
Ta = 25°C
Typ
Ta = –40 to 85°C
Test
Conditions
FROM
(Input) (Output)
TO
Item
Symbol
Unit
Min
—
Max
10.9
13.4
Min
1.0
1.0
Max
14.0
16.0
6.0
CL = 15 pF
CL = 50 pF
Propagation
delay time
tPLH
tPHL
ns
A
Y
—
9.5
•
VCC = 3.3 ± 0.3 V
Ta = 25°C
Typ
Ta = –40 to 85°C
Test
Conditions
FROM
(Input) (Output)
TO
Item
Symbol
Unit
Min
—
Max
8.9
Min
1.0
1.0
Max
10.5
13.0
5.0
CL = 15 pF
CL = 50 pF
Propagation
delay time
tPLH
tPHL
ns
A
Y
—
7.5
11.4
•
VCC = 5.0 ± 0.5 V
Ta = 25°C
Typ
Ta = –40 to 85°C
Test
Conditions
FROM
(Input) (Output)
TO
Item
Symbol
Unit
Min
—
Max
5.5
Min
1.0
1.0
Max
6.5
3.5
CL = 15 pF
CL = 50 pF
Propagation
delay time
tPLH
tPHL
ns
A
Y
—
5.0
7.0
8.0
Operating Characteristics
•
CL = 50 Pf
Ta = 25°C
Typ
Item
Symbol VCC (V)
Unit
Test Conditions
f = 10 MHz
Min
Max
—
3.3
—
—
4.0
Power dissipation
capacitance
CPD
5.0
pF
5.0
—
Test Circuit
VCC
Output
Input
Pulse
generator
50 Ω
CL
Note: CL includes probe and jig capacitance.
Rev.2.00, May 19, 2006 page 4 of 5
HD74LV1GWU04A
• Waveforms
tr
tf
VCC
90%
50%
10%
90%
50%
10%
Input
GND
VOH
50%
50%
tPLH
Output
VOL
tPHL
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. The output are measured one at a time with one transition per measurement.
Package Dimensions
Package Name
CMPAK-6
JEITA Package Code
SC-88
RENESAS Code
PTSP0006JA-A
Previous Code
MASS[Typ.]
0.006g
CMPAK-6 / CMPAK-6V
D
A
e
Q
c
E
HE
L
P
L
A
A
L
1
A3
b
Reference Dimension in Millimeters
Symbol
x
S
A
M
Min
0.8
0
Nom Max
e
A
A1
A2
A3
b
1.1
0.1
1.0
0.8
0.9
0.25
0.2
A
2
1
A
0.15
0.1
1.8
1.15 1.25
0.65
0.25
0.25
2.2
c
D
E
e
0.15
2.0
1.35
A
y
S
S
e
1
HE
L
L1
LP
x
2.0
0.3
0.1
0.2
2.1
2.2
0.7
0.5
0.6
0.05
0.05
0.35
b
l
1
y
c
b2
e1
b
2
1.5
l1
Q
0.9
A-A Section
Pattern of terminal position areas
0.25
Rev.2.00, May 19, 2006 page 5 of 5
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0
|