Renesas Computer Hardware H8 36109 User Guide

REJ10J1320-0100  
H8/36109 Group Expansion I/O Board  
HS36109EIO61H  
User’s Manual  
Renesas Microcomputer Development Environment System  
H8 Family / H8/300H Tiny Series  
HS36109EIO61HE  
Rev.1.00  
Revision Date: Apr. 06, 2006  
 
Keep safety first in your circuit designs!  
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and  
more reliable, but there is always the possibility that trouble may occur with them. Trouble with  
semiconductors may lead to personal injury, fire or property damage.  
Remember to give due consideration to safety when making your circuit designs, with appropriate  
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or  
(iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
1. These materials are intended as a reference to assist our customers in the selection of the Renesas  
Technology Corp. product best suited to the customer's application; they do not convey any license  
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or  
a third party.  
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-  
party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or  
circuit application examples contained in these materials.  
3. All information contained in these materials, including product data, diagrams, charts, programs and  
algorithms represents information on products at the time of publication of these materials, and are  
subject to change by Renesas Technology Corp. without notice due to product improvements or  
other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or  
an authorized Renesas Technology Corp. product distributor for the latest product information  
before purchasing a product listed herein.  
The information described here may contain technical inaccuracies or typographical errors.  
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising  
from these inaccuracies or errors.  
Please also pay attention to information published by Renesas Technology Corp. by various means,  
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).  
4. When using any or all of the information contained in these materials, including product data,  
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total  
system before making a final decision on the applicability of the information and products. Renesas  
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the  
information contained herein.  
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or  
system that is used under circumstances in which human life is potentially at stake. Please contact  
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when  
considering the use of a product contained herein for any specific purposes, such as apparatus or  
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in  
whole or in part these materials.  
7. If these products or technologies are subject to the Japanese export control restrictions, they must  
be exported under a license from the Japanese government and cannot be imported into a country  
other than the approved destination.  
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the  
country of destination is prohibited.  
8. Please contact Renesas Technology Corp. for further details on these materials or the products  
contained therein.  
 
 
IMPORTANT INFORMATION  
READ FIRST  
• READ this user's manual before using this emulator product.  
• KEEP the user's manual handy for future reference.  
Do not attempt to use the emulator product until you fully understand its mechanism.  
Emulator Product:  
Throughout this document, the term "emulator product" shall be defined as the following  
products produced only by Renesas Technology Corp. excluding all subsidiary products.  
E6000 emulator station  
Expansion I/O board  
User system interface cables  
PC interface board  
The user system or a host computer is not included in this definition.  
Purpose of the Expansion I/O Board:  
This expansion I/O board is installed in the E6000 emulator, and enables the emulator station to be  
connected to the user system interface cable. This expansion I/O board must only be used for the  
above purpose.  
Improvement Policy:  
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as  
Renesas) pursues a policy of continuing improvement in design, functions, performance, and  
safety of the emulator product. Renesas reserves the right to change, wholly or partially, the  
specifications, design, user's manual, and other documentation at any time without notice.  
Target User of the Emulator Product:  
This emulator product should only be used by those who have carefully read and thoroughly  
understood the information and restrictions contained in the user's manual. Do not attempt to use  
the emulator product until you fully understand its mechanism.  
It is highly recommended that first-time users be instructed by users that are well versed in the  
operation of the emulator product.  
I
 
LIMITED WARRANTY  
Renesas warrants its emulator products to be manufactured in  
accordance with published specifications and free from defects in  
material and/or workmanship. Renesas, at its option, will repair or  
replace any emulator products returned intact to the factory,  
transportation charges prepaid, which Renesas, upon inspection,  
determine to be defective in material and/or workmanship. The foregoing  
shall constitute the sole remedy for any breach of Renesas’ warranty.  
See the Renesas warranty booklet for details on the warranty period. This  
warranty extends only to you, the original Purchaser. It is not transferable  
to anyone who subsequently purchases the emulator product from you.  
Renesas is not liable for any claim made by a third party or made by you  
for a third party.  
DISCLAIMER  
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR  
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED  
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,  
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,  
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR  
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT  
SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR  
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE  
EMULATOR PRODUCT, THE USE OF ANY EMULATOR  
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS  
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS  
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST  
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED  
FROM THE EMULATOR PRODUCT.  
II  
 
State Law:  
Some states do not allow the exclusion or limitation of implied warranties or liability for  
incidental or consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may have other rights which may vary from  
state to state.  
The Warranty is Void in the Following Cases:  
Renesas shall have no liability or legal responsibility for any problems caused by misuse,  
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the  
emulator product without Renesas’ prior written consent or any problems caused by the user  
system.  
All Rights Reserved:  
This user's manual and emulator product are copyrighted and all rights are reserved by  
Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in  
hard-copy or machine-readable form, by any means available without Renesas’ prior written  
consent.  
Other Important Things to Keep in Mind:  
1. Circuitry and other examples described herein are meant merely to indicate the characteristics  
and performance of Renesas’ semiconductor products. Renesas assumes no responsibility for  
any intellectual property claims or other problems that may result from applications based on  
the examples described herein.  
2. No license is granted by implication or otherwise under any patents or other rights of any third  
party or Renesas.  
Figures:  
Some figures in this user's manual may show items different from your actual system.  
Limited Anticipation of Danger:  
Renesas cannot anticipate every possible circumstance that might involve a potential hazard.  
The warnings in this user's manual and on the emulator product are therefore not all inclusive.  
Therefore, you must use the emulator product safely at your own risk.  
III  
 
SAFETY PAGE  
READ FIRST  
• READ this user's manual before using this emulator product.  
• KEEP the user's manual handy for future reference.  
Do not attempt to use the emulator product until you fully understand its mechanism.  
DEFINITION OF SIGNAL WORDS  
This is the safety alert symbol. It is used to alert you to potential personal  
injury hazards. Obey all safety messages that follow this symbol to avoid  
possible injury or death.  
DANGER  
DANGER indicates an imminently hazardous situation which, if not  
avoided, will result in death or serious injury.  
WARNING  
WARNING indicates a potentially hazardous situation which, if not  
avoided, could result in death or serious injury.  
CAUTION  
CAUTION indicates a potentially hazardous situation which, if not  
avoided, may result in minor or moderate injury.  
CAUTION  
CAUTION used without the safety alert symbol indicates a  
potentially hazardous situation which, if not avoided, may result  
in property damage.  
NOTE emphasizes essential information.  
IV  
 
WARNING  
Observe the precautions listed below. Failure to do so  
will result in a FIRE HAZARD and will damage the user  
system and the emulator product or will result in  
PERSONAL INJURY. The USER PROGRAM will be  
LOST.  
1. Do not repair or remodel the emulator product by  
yourself for electric shock prevention and quality  
assurance.  
2. Always switch OFF the E6000 emulator and user system  
before connecting or disconnecting any CABLES or  
PARTS.  
3. Always before connecting any CABLES, make sure that  
pin 1 on both sides are correctly aligned.  
4. Supply power according to the power specifications and  
do not apply an incorrect power voltage. Use only the  
provided power cable.  
V
 
Preface  
Thank you for purchasing this H8/36109 group expansion I/O board (HS36109EIO61H;  
hereinafter referred to as the expansion I/O board) for the E6000 emulator.  
The expansion I/O board enables user systems for Renesas’ original microcomputer H8/36109  
group to be developed using an H8/36109 group E6000 emulator (HS3664EPI61H or  
HS3664EPI62H; hereinafter referred to as the emulator).  
i
 
Contents  
Section 1 Overview ...........................................................................................1  
1.1 Environment Conditions................................................................................................... 1  
1.2 Supported MCUs and User System Interface Cable......................................................... 1  
1.3 Operating Voltage and Frequency Specifications............................................................. 2  
1.4 Components ...................................................................................................................... 3  
Section 2 Connection Procedures......................................................................5  
2.1 Using Emulator without Connecting User System ........................................................... 5  
2.2 Using Emulator with Connecting User System through User System Interface Cable .... 6  
Section 3 User System Interface Circuit............................................................9  
Section 4 Notice ................................................................................................11  
4.1 Notes on Accessing Registers........................................................................................... 11  
4.2 Power-on Reset and Low-voltage Detection Circuits....................................................... 13  
4.3 On-chip Oscillator............................................................................................................. 13  
ii  
 
Section 1 Overview  
The H8/36109 group E6000 expansion I/O board (hereinafter referred to as the expansion I/O  
board) is an efficient software and hardware development support tool for application systems  
using timer RC, timer RD, SCI3, and AD converter (ports D to H are shared), which are dedicated  
additional functions of the Renesas’ original microcomputer H8/36109 group.  
The expansion I/O board should be used with H8/3664 series E6000 emulator station  
(HS3664EPI61H or HS3664EPI62H; hereinafter referred to as the emulator).  
1.1  
Environment Conditions  
Table 1  
Environment Conditions  
Item  
Specification  
Temperature  
Operating: +10 to +35°C  
Storage: –10 to +50°C  
Humidity  
Operating: 35 to 80% RH; no condensation  
Storage: 35 to 80% RH; no condensation  
No corrosive gases  
Ambient gases  
Power supply  
Power supply from E6000 emulator station  
Depends on the MCU within the range 3.0 V to 5.5 V  
User system voltage (UVcc)  
1.2  
Supported MCUs and User System Interface Cable  
Table 2 shows the correspondence between the MCUs and the user system interface cable  
supported by the emulator.  
Table 2  
H8/36109 Group MCUs and User System Interface Cable  
MCU Type Number  
Package  
E6000 User System Interface Cable  
HD64F36109  
HD64336109  
HD64336108  
HD64336107  
100-pin QFP (FP-100A)  
HS36109ECF61H  
100-pin QFP (FP-100U)  
HS36109ECH61H  
1
 
1.3  
Operating Voltage and Frequency Specifications  
Table 3 shows the MCU operating voltage and frequency specifications supported by the  
emulator. If the emulator is used in an environment that exceeds the operating voltage range and  
operating frequency range guaranteed for the MCU operation, normal emulator operation is not  
guaranteed.  
Table 3  
Operating Voltage and Frequency Specifications  
MCU Type  
Operating Voltage (V)  
Operating Frequency Range (φ) (MHz)  
H8/36109 group  
3.0 to 5.5  
4.0 to 5.5  
4 to 10  
4 to 20  
NOTE  
For details on the operating voltage and frequency  
specifications, refer to the MCU hardware manual.  
2
 
1.4  
Components  
Figure 1.1 shows the HS36109EIO61H expansion I/O board appearance, and table 4 lists the  
components of the expansion I/O board. Please make sure you have all of these components when  
unpacking.  
E 6 0 0  
0 E M U L A T  
O R  
E
E CABL  
ERFAC  
E 6 0 0 0  
USER INT  
Figure 1.1 HS36109EIO61H Expansion I/O Board  
Table 4  
HS36109EIO61H Components  
No. Component  
Quantity  
Remarks  
1
2
HS36109EIO61H  
Documentation  
1
1
Expansion I/O board  
User’s manual for HS36109EIO61H (this manual)  
3
 
4
 
Section 2 Connection Procedures  
WARNING  
Always switch OFF the user system and the emulator  
product before the EXPANSION I/O BOARD or USER  
SYSTEM INTERFACE CABLE is connected to or removed  
from any part.  
Before connecting, make sure that pin 1 on each side is  
correctly aligned. Failure to do so will result in a FIRE  
HAZARD and will damage the user system, the emulator  
product, the user system interface cable, and the expansion  
I/O board, or will result in PERSONAL INJURY. The USER  
PROGRAM will be LOST.  
2.1  
Using Emulator without Connecting User System  
1. Make sure the emulator is turned off.  
2. After making sure the direction of the expansion I/O board connector (labeled E6000  
EMULATOR) is correct, firmly insert the expansion I/O board connector into the emulator  
station connector (labeled USER INTERFACE). It is possible to use the expansion I/O board  
connecting only to the emulator.  
5
 
2.2  
Using Emulator with Connecting User System through User System  
Interface Cable  
CAUTION  
When connecting or removing the user system interface  
cable, apply force only in the direction suitable for  
connection or removal, while making sure not to bend or  
twist the cable or connectors.  
Otherwise, the cables or connectors will be damaged.  
1. Make sure that the emulator and the user system are turned off.  
2. [1] After making sure the direction of the expansion I/O board connector (labeled E6000  
EMULATOR) is correct, firmly insert the expansion I/O board connector into the emulator  
station connector (labeled USER INTERFACE; [1] in figure 2.1).  
[2] Connect the expansion I/O board (labeled USER INTERFACE CABLE) and the user  
system interface cable body.  
6
 
Emulator station  
E 6 0 0 0  
[1]  
Expansion I/O board  
E 6 0 0 0  
[2]  
Cable body connector  
CTS screws (M3 x 6 mm)  
User system interface cable  
Figure 2.1 Connecting Expansion I/O Board to Emulator Station and User System  
Interface Cable  
7
 
8
 
Section 3 User System Interface Circuit  
Switches, protection circuits, and termination circuits are provided for this expansion I/O board  
and used to connect signals to the user system interface cable. Figure 3.1 shows the user system  
interface signal circuit.  
E6000 (HS3664EPI61H or HS3664EPI62H)  
HS36109EIO61H  
Vcc  
47 kΩ  
H8/3664  
H8/36109  
Evaluation chip  
47 Ω  
User system  
interface cable  
Ports D, E, F, G, and H  
Figure 3.1 User System Interface Signal Circuit (Ports D, E, F, G, and H)  
9
 
10  
 
Section 4 Notice  
WARNING  
Observe the precautions listed below. Failure to do so will  
result in a FIRE HAZARD and will damage the user system  
and the emulator product or will result in PERSONAL  
INJURY. The USER PROGRAM will be LOST.  
1. This expansion I/O board is specifically designed for the  
H8/36109 group using the H8/3664 series E6000 emulator  
(HS3664EPI61H or HS3664EPI62H). Do not use this  
expansion I/O board with any other emulator station.  
2. Use the H8/36109 group user system interface cable  
(HS36109ECF61H for FP-100A or HS3109ECH61H for  
FP-100U).  
Do not use any other series of user system interface  
cable.  
1. Do not place heavy objects on the expansion I/O board.  
2. Power is supplied from the emulator station to the expansion I/O board.  
4.1  
Notes on Accessing Registers  
There are the following notes on accessing registers due to the differences between the product  
chip and the evaluation chip.  
1. For bits 7 and 6 of H’FFF5 (interrupt enable register 2), bits 7, 4, and 2 of H’FFF9 (module  
standby control register 1), and bits 6, 5, 3, and 1 of H’FFFA (module standby control register  
2), the hardware manual describes that ‘The initial value is 0. Reserved. This bit is always read  
as 0.’ In the emulator, replace the description as ‘Set the bit to 0. This bit is read as the set  
value.’  
2. For bit 0 of H’FFFB, the hardware manual describes that ‘Reserved.’ In the emulator, replace  
the description as ‘Set the bit to 0. This bit is read as the set value.’  
3. In the hardware manual, there are registers in addresses H’F730 to H’F731, H’F734, H’F738  
to H’F73A, H’F73C to H’F73F, H’FF90 to H’FF93, H’FF9B, and H’FFEF. In the emulator,  
since there are no registers in those addresses, the description will be ‘This bit cannot be  
modified and the read value is undefined.’  
11  
 
Table 5  
Differences between the Evaluation Chip and Product Chip Registers  
AddressRegister  
Bit 7  
Bit 6  
Bit 5  
Bit 4  
Bit 3  
Bit 2  
Bit 1  
Bit 0  
H'F730  
H'F731  
H'F734  
H'F738  
H'F739  
H'F73A  
H'F73C  
H'F73D  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
H8/3660  
(Evaluation H'F73E  
chip)  
H'F73F  
H'FFEE PCRC  
H'FFEF  
-
H'FFF5 IENR2  
H'FFF7 IRR2  
IENTB3  
IRRTB3  
MSTS4  
IENTB2  
IENTB2  
MSTIIC  
IENTB1  
IENTB1  
MSTS3  
MSTTB2  
-
-
-
-
-
-
-
-
-
-
-
H'FFF9 MSTCR1  
H'FFFA MSTCR2  
H'FFFB MSTCR3  
H'FFFC TSCR  
MSTAD  
MSTWD  
MSTTW  
MSTTV  
MSTTA  
MSTS3_2 MSTTB3  
MSTTB1  
MSTTX  
-
-
-
MSTTZ0  
MSTPWM  
-
-
-
-
-
-
-
-
-
-
-
-
-
12  
 
Table 5  
Differences between the Evaluation Chip and Product Chip Registers (cont)  
AddressRegister  
H'F730 LVDCR  
H'F731 LVDSR  
H'F734 CKCSR  
H'F738 RCCR  
Bit 7  
Bit 6  
Bit 5  
Bit 4  
Bit 3  
Bit 2  
Bit 1  
Bit 0  
LVDE  
BGRE  
-
-
-
-
-
LVDSEL  
LVDRE  
LVDDE  
LVDUE  
-
-
-
-
LVDDF  
LVDUF  
PMRJ1  
RCSTP  
PMRJ0  
OSCSEL  
-
CKSWIE  
CKSWIF  
-
CKCSTA  
FSEL  
VCLSEL  
-
-
RCPSC1  
RCPSC0  
H'F739 RCTRMDPR WRI  
PRWE  
LOCKDW TRMDRWE  
-
-
-
-
H'F73A RCTRMDR TRMD7  
TRMD6  
TRMD5  
TRMD4  
TRMD3  
TRMD2  
TRMD1  
TRMD0  
H'F73C ICRA  
ICRA7  
ICRA6  
ICRA5  
ICRA4  
ICRA3  
ICRA2  
ICRA1  
ICRA0  
H8/36109 H'F73D ICRB  
H'F73E ICRC  
-
ICRB6  
ICRB5  
ICRB4  
-
-
-
-
ICRC7  
-
-
ICRC4  
-
ICRC2  
ICRC1  
ICRC0  
H'F73F ICRD  
ICRD7  
ICRD6  
ICRD5  
ICRD4  
ICRD3  
-
-
-
H'FFEE PCRC  
-
-
-
-
PCRC3  
PCRC2  
PCRC1  
PCRC0  
H'FFEF SYSCR3  
H'FFF5 IENR2  
STS3  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
IENTB1  
-
-
-
-
H'FFF7 IRR2  
-
-
IRRTB1  
-
-
-
-
H'FFF9 MSTCR1  
H'FFFA MSTCR2  
-
MSTIIC  
MSTS3  
-
MSTWD  
MSTTV  
MSTTA  
MSTS3_2  
-
-
-
-
-
-
MSTTB1  
-
-
-
-
-
-
MSTPWM  
H'FFFB  
H'FFFC  
-
-
-
-
-
-
-
-
4.2 Power-on Reset and Low-voltage Detection Circuits  
For the product chip, power-on reset and low-voltage detection circuits can be selected as the  
optional functions. However, since the evaluation chip does not incorporate these functions,  
software debugging cannot be performed in the emulator.  
4.3 On-chip Oscillator  
The product chip incorporates an on-chip oscillator. However, since the evaluation chip does not  
incorporate this function, software debugging on the on-chip oscillator and the general  
input/output function of port J cannot be performed in the emulator.  
13  
 
14  
 
H8/36109 Group Expansion I/O Board  
HS36109EIO61H User's Manual  
Publication Date: Rev.1.00, April 6, 2006  
Published by:  
Sales Strategic Planning Div.  
Renesas Technology Corp.  
Customer Support Department  
Global Strategic Communication Div.  
Renesas Solutions Corp.  
Edited by:  
© 2006. Renesas Technology Corp. All rights reserved. Printed in Japan.  
 
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan  
RENESAS SALES OFFICES  
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.  
Renesas Technology America, Inc.  
450 Holger Way, San Jose, CA 95134-1368, U.S.A  
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501  
Renesas Technology Europe Limited  
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.  
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900  
Renesas Technology (Shanghai) Co., Ltd.  
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120  
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898  
Renesas Technology Hong Kong Ltd.  
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong  
Tel: <852> 2265-6688, Fax: <852> 2730-6071  
Renesas Technology Taiwan Co., Ltd.  
10th Floor, No.99, Fushing North Road, Taipei, Taiwan  
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999  
Renesas Technology Singapore Pte. Ltd.  
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632  
Tel: <65> 6213-0200, Fax: <65> 6278-8001  
Renesas Technology Korea Co., Ltd.  
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea  
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145  
Renesas Technology Malaysia Sdn. Bhd  
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia  
Tel: <603> 7955-9390, Fax: <603> 7955-9510  
Colophon 6.0  
 
H8/36109 Group  
Expansion I/O Board  
HS36109EIO61H  
User’s Manual  
 

RCA Clock RC205 User Guide
RCA Universal Remote RCU400R3 User Guide
RCA VCR VR616HF User Guide
Regency Indoor Fireplace F2400 User Guide
RocketFish Surge Protector RF PCS7ES User Guide
Roper Oven D975 User Guide
Salton Toaster FAC200T User Guide
Samsung Computer Monitor T24C550ND User Guide
Samsung Microwave Oven SMH9151B User Guide
Sansui CRT Television HDLCD2650 User Guide