Radio Shack Stereo Receiver DX 395 User Guide

20-225.fm Page 1 Wednesday, August 4, 1999 10:07 AM  
Cat. No. 20-225  
OWNER’S MANUAL  
Please read before using this equipment.  
DX-395  
FM/AM/SW1/SW2  
PLL Synthesized Receiver  
 
20-225.fm Page 3 Wednesday, August 4, 1999 10:07 AM  
PREPARATION  
Caution: Always use fresh bat-  
teries of the required size and  
type.  
SUPPLYING POWER  
Using Internal Battery  
Power  
3. Insert the four AA batteries into  
the battery compartment, as  
indicated by the polarity sym-  
bols (+ and –) above the com-  
partment.  
When you use battery power, your  
radio requires four AA batteries for  
operation and two AAA batteries for  
clock and memory station backup.  
We recommend alkaline batteries  
such as Radio Shack Cat. No. 23-  
552 and 23-555.  
Follow these steps to install batter-  
ies.  
4. Replace the cover.  
Note: If the radio operates erratically  
or does not receive strong FM sta-  
tions, replace the batteries.  
1. Slide the battery compartment  
cover in the direction of the  
arrow and remove the cover.  
Using Vehicle Battery  
Power  
To power the radio from your vehi-  
cle’s cigarette lighter socket, you  
need a DC adapter (not supplied)  
such as Radio Shack Cat. No. 14-  
844.  
2. Insert the two AAA batteries into  
the battery compartment, as  
indicated by the polarity sym-  
bols (+ and –) inside the com-  
partment.  
Cautions:  
Note: To make it easy to  
remove the batteries later, place  
the batteries on top of the rib-  
bon.  
• You must use an adapter that  
supplies 6 volts with the center  
tip set to negative, delivers at  
least 300 milliamps, and has a  
plug that correctly fits the radio’s  
DC 6V jack. The recommended  
adapter meets these require-  
ments. Using an adapter that  
does not meet these specifica-  
tions could seriously damage  
the radio.  
3
 
20-225.fm Page 4 Wednesday, August 4, 1999 10:07 AM  
• Always plug the adapter into the  
radio before you plug it into the  
cigarette lighter socket. Always  
unplug the DC adapter from the  
cigarette lighter socket before  
you unplug it from the radio.  
tions could seriously damage  
the radio.  
• Always plug the adapter into the  
radio before you plug it into the  
AC outlet. Always unplug the AC  
adapter from the AC outlet  
before you unplug it from the  
radio.  
Follow the adapter’s instruc-  
Note:  
tions to set the voltage switch to 6  
volts and select the proper adapta-  
plug.  
1. Set the adapter’s voltage switch  
to 6V.  
2. Insert the adapter’s barrel plug  
into the radio’s DC 6V jack.  
3. Insert the adapter’s cigarette-  
lighter plug into the vehicle’s  
cigarette lighter socket.  
1. Insert the adaptaplug into the  
Using AC Power  
radio’s DC 6V jack.  
2. Plug the adapter into a standard  
AC outlet.  
To power the radio with AC power,  
you need an AC adapter (not sup-  
plied). We recommend Radio Shack  
Cat. No. 273-1650.  
Cautions:  
• You must use an adapter that  
supplies 6 volts with the center  
tip set to negative, delivers at  
least 300 milliamps, and has a  
plug that correctly fits the radio’s  
DC 6V jack. The recommended  
adapter meets these require-  
ments. Using an adapter that  
does not meet these specifica-  
4
 
20-225.fm Page 5 Wednesday, August 4, 1999 10:07 AM  
SETTING THE CLOCK  
USING EARPHONES  
SEC  
After you connect power,  
flashes  
You can use the built-in speaker to  
listen to the radio. Or, you can use  
stereo earphones (not supplied) with  
on the display and the clock begins  
to run.  
1
a /8-inch plug to listen in private.  
Follow these steps to set the time.  
1
Insert the earphones’ /8-inch plug  
ADJ  
TIME ADJ  
1. Press and hold  
appears.  
.
into the radio’s earphone jack.  
TIME ADJ  
2. While holding down  
,
,
Note: The built-in speaker discon-  
nects when you plug in earphones.  
HR  
press  
to set the hour.  
TIME ADJ  
to set the minute.  
3. While holding down  
MIN  
press  
Notes:  
To advance the settings rap-  
Listening Safely  
To protect your hearing, follow these  
guidelines when you use earphones.  
HR  
idly, press and hold  
MIN  
or  
• Set the volume to the lowest  
setting before you begin listen-  
ing. After you begin listening,  
adjust the volume to a comfort-  
able level.  
.
PM appears when the clock  
displays PM hour. AM  
a
appears when the clock dis-  
plays an AM hour.  
• Do not listen at extremely high  
volume levels. Extended high-  
volume listening can lead to  
permanent hearing loss.  
ADJ  
TIME ADJ  
4. Release  
pears.  
.
disap-  
• Once you set the volume, do  
not increase it. Over time, your  
ears adapt to the volume level,  
so a volume level that does not  
cause discomfort might still  
damage your hearing.  
5
 
20-225.fm Page 6 Wednesday, August 4, 1999 10:07 AM  
Traffic Safety  
USING THE STAND  
Do not wear earphones while oper-  
ating a motor vehicle or riding a bicy-  
cle. This can create a traffic hazard  
and is illegal in some areas.  
You can use the stand on the back of  
the radio to prop it up so you can  
easily see the clock display. Simply  
lift the stand away from the radio and  
set the radio on a flat surface.  
Even though some earphones are  
designed to let you hear some out-  
side sounds when listening at nor-  
mal volume levels, they still present  
a traffic hazard.  
6
 
20-225.fm Page 7 Wednesday, August 4, 1999 10:07 AM  
RADIO OPERATION  
TUNING THE RADIO  
4. Set SENS to DX or LOC.  
DX — to receive weak signals  
1. Set the volume to its lowest set-  
ting, and lift up and extend the  
antenna.  
LOC — to receive strong  
(local) signals  
SENS only functions for  
FM and shortwave reception.  
Note:  
2. Set ON/OFF to ON to turn on the  
radio. The last frequency tuned  
is automatically selected and  
displayed.  
5. Press TUNING or to tune  
to the desired station.  
Note: To automatically tune the  
radio to the next strong signal,  
press and hold TUNING  
or  
for about 2 seconds.  
6. Adjust the volume to a comfort-  
able level.  
3. Slide FM/AM/SW1/SW2 to the  
desired band.  
7. Set the tone switch to HI or LO.  
HI — to enhance music  
LO — to enhance speech  
FM — to receive signals in  
the 87.5 to 107.9 MHz range  
AM — to receive signals in  
the 530 to 1710 KHz range  
SW1 — to receive signals in  
the 3.20 to 7.30 MHz range  
8. Set ON/OFF to OFF to turn off  
the radio.  
SW2 — to receive signals in  
the 9.50 to 21.75 MHz range  
7
 
20-225.fm Page 8 Wednesday, August 4, 1999 10:07 AM  
STORING STATIONS  
INTO MEMORY  
SETTING THE SLEEP  
FUNCTION  
You can store up to 20 stations (5  
each in FM, AM, SW1 and SW2) and  
recall them with the touch of a but-  
ton. Follow these steps to store a  
station into memory.  
This feature allows you to go to  
sleep with the radio playing. The ra-  
dio plays for 59 minutes, then turns  
off automatically.  
1. Tune to the desired station.  
TUNING  
1. Press  
or  
to tune  
ON/OFF  
OFF  
.
2. Set  
to  
to the station you want to store.  
SLEEP  
SLEEP  
3. Press  
.
and the last  
STORE  
2. Press  
. ch flashes.  
selected frequency appear and  
the radio turns on.  
3. Within 5 seconds, press a num-  
ber button (1-5) to store a sta-  
tion in that memory location.  
The button number appears on  
the display.  
To turn off the sleep function before  
it automatically turns off, press  
SLEEP  
SLEEP  
again.  
disappears and  
the radio turns off.  
Note: If you do not store a sta-  
tion within 5 seconds, ch disap-  
pears. Repeat Steps 2-3.  
USING LOCK  
To tune to a stored station, press the  
desired memory location button.  
To prevent accidentally changing the  
station, you can set the lock switch  
to  
. This prevents manual tuning  
or selecting any of the preset memo-  
ry buttons.  
8
 
20-225.fm Page 9 Wednesday, August 4, 1999 10:07 AM  
TIME ADJ  
4. While holding down  
,
LIGHTING THE  
DISPLAY  
MIN  
press  
to set the alarm  
minute.  
To view the screen in dark surround-  
Note: To advance the settings  
HR  
LIGHT  
ings, press and hold  
.
rapidly, press and hold  
MIN  
or  
.
ADJ  
STANDBY  
TIME ADJ  
5. Release  
.
and  
ON TIME  
disappear, but  
remains.  
Note: The alarm time is now set, and  
the alarm is on.  
Follow these steps to turn the alarm  
on or off.  
1. Turn on the radio, and tune to  
the station you want to hear at  
the set alarm time.  
USING THE ALARM  
The alarm feature lets you select a  
time for the radio to turn on. Follow  
these steps to set the alarm time.  
Adjust the volume to the desired  
level.  
2. Turn off the radio.  
STANDBY  
ALARM  
1. Press  
.
and  
ON TIME  
STANDBY  
appear with the current  
ALARM  
3. Press  
until  
ap-  
time.  
pears on the screen.  
At the set alarm time, the radio  
turns on and plays until you turn  
it off.  
4. To turn off the alarm, press  
STANDBY  
ALARM  
until  
disappears.  
5. To turn the alarm back on to  
sound again the next day, press  
STANDBY  
ALARM  
until  
appears.  
ADJ  
TIME ADJ  
2. Press and hold  
appears.  
.
DISPLAY  
Note: Press  
at any time to  
see the alarm time and the station  
you set.  
TIME ADJ  
3. While holding down  
,
HR  
press  
to set the alarm hour.  
9
 
20-225.fm Page 10 Wednesday, August 4, 1999 10:07 AM  
MAINTENANCE  
Your Radio Shack DX-395 FM/AM/SW1/SW2 PLL Synthesized Receiver is  
an example of superior design and craftsmanship. The following suggestions  
will help you care for the receiver so you can enjoy it for years.  
Keep the receiver dry. If it gets wet, wipe it dry immediately.  
Liquids might contain minerals that can corrode the electronic  
circuits.  
Handle the receiver gently and carefully. Dropping it can dam-  
age circuit boards and cases and can cause the receiver to  
work improperly.  
Use and store the receiver only in normal temperature environ-  
ments. Temperature extremes can shorten the life of electronic  
devices and distort or melt plastic parts.  
Keep the receiver away from dust and dirt, which can cause  
premature wear of parts.  
Wipe the receiver with a damp cloth occasionally to keep it  
CLEANER  
looking new. Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the receiver.  
Modifying or tampering with the DX-395’s internal components can cause a  
malfunction and might invalidate the receiver’s warranty and void your FCC  
authorization to operate it. If your receiver is not performing as it should, take  
it to your local Radio Shack store for assistance.  
10  
 
20-225.fm Page 11 Wednesday, August 4, 1999 10:07 AM  
THE FCC WANTS YOU  
TO KNOW  
Your radio might cause TV or radio  
interference even when it is operat-  
ing properly. To determine whether  
your radio is causing the interfer-  
ence, turn off your radio. If the inter-  
ference goes away, your radio is  
causing the interference. Try to elim-  
inate the interference by:  
• Moving your radio away from  
the receiver  
• Connecting your radio to an out-  
let that is on a different electrical  
circuit from the receiver  
• Contacting your local Radio  
Shack store for help  
If you cannot eliminate the interfer-  
ence, the FCC requires that you stop  
using your radio.  
11  
 
20-225.fm Page 12 Wednesday, August 4, 1999 10:07 AM  
SPECIFICATIONS  
Frequencies  
AM ........................................................................................ 530–1710 KHz  
FM ...................................................................................... 87.5–107.9 MHz  
SW1.......................................................................................... 3.2–7.3 MHz  
SW2...................................................................................... 9.5–21.75 MHz  
Power Sources.................... 2 AAA batteries (for backup) (Cat. No. 23-555) and  
4 AA batteries (Cat. No. 23-552),  
DC Adapter (Cat. No. 14-844),  
AC Adapter (Cat. No. 273-1650)  
3
5
11  
Dimensions (HWD)......................................................... 4 /8 × 7 /8 × 1 /16 Inches  
(111 × 193 × 42 mm)  
Weight .................................................................................. 1 lb. 7 oz. (771 gm)  
Specifications are typical; individual units might vary. Specifications are subject  
to change and improvement without notice.  
RADIO SHACK LIMITED WARRANTY  
This product is warranted against defects for 90 days from date of pur-  
chase from Radio Shack company-owned stores and authorized Radio  
Shack franchisees and dealers. Within this period, we will repair it with-  
bring your Radio Shack sales  
out charge for parts and labor. Simply  
slip  
as proof of purchase date to any Radio Shack store. Warranty does  
not cover transportation costs. Nor does it cover a product subjected to  
misuse or accidental damage.  
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO  
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES ARE LIM-  
ITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED  
WARRANTIES CONTAINED HEREIN. Some states do not permit limita-  
tion or exclusion of implied warranties; therefore, the aforesaid limita-  
tion(s) or exclusion(s) may not apply to the purchaser.  
This warranty gives you specific legal rights and you may also have other rights which vary  
from state to state.  
We Service What We Sell  
9/94  
RADIO SHACK  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
7A5  
Printed in Hong Kong  
 

RCA MP3 Player TC1200 User Guide
RedMax Trimmer SGCZ2401S CA User Guide
Roberts Radio Radio RD 11 User Guide
Roland Musical Instrument AT20s User Guide
Samsung Cassette Player DA FM61C User Guide
Samsung Projector 20071106142725218 User Guide
Sanyo Vacuum Cleaner SC 24L User Guide
SATO Printer CG408DT User Guide
Schumacher Battery Charger 600A User Guide
Sennheiser Headphones HD 250 User Guide