Radio Shack Fax Machine TFX 1032 User Guide

43-1204.fm Page 1 Wednesday, August 18, 1999 8:45 AM  
OWNER’S MANUAL  
TFX-1032  
Fax Machine with Automatic Cutter  
Please read before using this equipment.  
Cat. No. 43-1204  
 
43-1204.fm Page 3 Wednesday, August 18, 1999 8:45 AM  
FEATURES  
Your Radio Shack TFX-1032 Fax Ma-  
chine with Automatic Cutter is perfect  
for your home or office. Because it is  
compliant with international standards,  
you can send and receive faxes virtu-  
ally anywhere in the world.  
16-Character  
shows various messages for easy op-  
eration.  
Digital  
Display—  
Built-In Telephone Handset—lets  
you use your TFX-1032 as a regular  
telephone.  
It also has these features:  
Built-In Anti-Curl Systemprevents  
10-Page Automatic Document Feed  
—lets you place up to ten pages of  
your document on the tray — a feature  
seldom found on small fax machines.  
the incoming fax from curling.  
Activity Reportmakes it easy to  
keep a record of all faxes sent and re-  
ceived.  
Automatic Paper Cuttercuts the  
received data into separate pages.  
Pollinglets you request a fax from  
an unattended fax machine.  
Copy Functionallows you to make  
enlarged or reduced copies.  
Music On Holdserenades callers  
when you place them on hold.  
Automatic Telephone, Fax, and TAD  
Switchingroutes the incoming call  
to the appropriate device.  
Limited Fax Receptionhelps to  
prevent unwanted faxes.  
28 Memory Automatic Dialinglets  
you store frequently-called numbers  
so you can dial them with a touch of a  
button (8 one-touch memories) or by  
specifying the memory location num-  
ber (20 speed-dial memories).  
Hearing-Aid Compatibleso you  
can use the fax machine’s handset to  
make calls if you use a hearing aid that  
has a T (telephone) switch.  
100-Foot (30-Meter) Paper Capacity  
Three Resolution Modes (Fine/Su-  
perfine/Normal)let you select the  
transmission mode best suited to the  
original document.  
Please read this Owner’s Manual com-  
pletely before you use your TFX-1032.  
For your records, we suggest you  
record your fax machine’s serial num-  
ber in the space provided. The serial  
number is on the bottom of the fax ma-  
chine.  
16-Shade Halftoneprints incoming  
faxes in 16 shades of grey — not just  
black and white.  
Serial Number __________________  
3
 
43-1204.fm Page 4 Wednesday, August 18, 1999 8:45 AM  
FCC STATEMENT  
Your fax machine complies with Part  
68 of FCC Rules. You must, upon re-  
quest, provide the FCC registration  
number and the REN to your phone  
company. Both numbers are shown on  
the bottom of your fax machine.  
THE FCC WANTS YOU  
TO KNOW  
In the unlikely event that your fax ma-  
chine causes problems on the phone  
line, the phone company can discon-  
nect your service. The phone company  
attempts to notify you in advance. If  
advance notice is not practical, the  
phone company notifies you of your  
right to file a complaint with the FCC.  
Note: You must not connect your fax  
machine to:  
• Coin-operated systems  
• Party-line systems  
• Most electronic key phone sys-  
tems  
Also, the phone company can make  
changes to its lines, equipment, opera-  
tions, or procedures that could affect  
the operation of your telephone equip-  
ment. The phone company notifies you  
of these changes in advance, so you  
can take steps to prevent interruption  
of your phone service.  
Important: The Telephone Consumer  
Protection Act of 1991 makes it unlaw-  
ful for any person to use a computer or  
other electronic device to send any  
message via telephone fax machine,  
unless the message clearly contains in  
a margin at the top or bottom of each  
transmitted page or on the first page of  
the transmission:  
LIGHTNING  
Your fax machine has built-in protec-  
tion circuits to reduce the risk of dam-  
age from surges in phone and power  
line current. These protection circuits  
meet or exceed FCC requirements.  
However, lightning striking the phone  
line or power lines can damage your  
fax machine.  
• The date, time, identification of the  
business, individual, or other  
entity  
• The telephone number of the  
sending machine.  
To program this information into your  
fax machine, see Page 13.  
Lightning damage is not common.  
Nevertheless, if you live in an area that  
has frequent electrical storms, we sug-  
gest that you unplug your fax machine  
during storms to reduce the possibility  
of damage.  
4
 
43-1204.fm Page 5 Wednesday, August 18, 1999 8:45 AM  
CONTENTS  
Unpacking the Fax Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Choosing a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Connecting to the Phone Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Connecting to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Connecting the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Connecting an Extension Phone or Answering Machine . . . . . . . . . . . . . . . . . . . . 8  
Setting Up the Fax Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Installing the Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Paper Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Setting the Dialing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Setting the Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Setting the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Setting the Key Entry Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Entering Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Setting the Receive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Telephone Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Using Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Adding a Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
One-Touch Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Clearing One-Touch / Speed-Dial Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Printing a Memory Number List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Fax Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Preparing a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Making a Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Sending a Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Setting the Contrast / Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Fax Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Sending International Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Receiving Faxes Using an Extension Telephone . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Voice Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Requesting a Fax from Another Machine (Polling) . . . . . . . . . . . . . . . . . . . . . . . . 24  
Limiting Fax Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Activity Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Setting the Feature Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Clearing a Document Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Clearing a Paper Jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Cleaning Document Feed Roller One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Cleaning Document Feed Roller Two . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
5
 
43-1204.fm Page 6 Wednesday, August 18, 1999 8:45 AM  
UNPACKING THE FAX MACHINE  
Be sure to unpack the following accessories before you dispose of the packing ma-  
terial.  
Handset  
Fax Machine  
Recording Paper  
Telephone Cord  
One-Touch Memory Card  
6
 
43-1204.fm Page 7 Wednesday, August 18, 1999 8:45 AM  
INSTALLATION  
CHOOSING A LOCATION  
CONNECTING TO THE  
PHONE LINE  
Select a location for your fax machine  
that:  
Plug one end of the supplied modular  
cord into the LINE jack on the back of  
the fax machine. Plug the cord’s other  
end into a modular telephone line jack.  
• Is not in direct sunlight.  
• Is near an AC power outlet and  
modular phone line jack.  
• Is at least 4 inches from other  
objects.  
• Is not near heating or air condi-  
tioner units.  
• Does not block the ventilation  
openings.  
• Keeps cords out of the way of nor-  
mal activities.  
Also note these important consider-  
ations:  
• Do not place objects on top of or  
under the fax machine.  
Note: Your fax machine connects di-  
rectly to a modular telephone line jack.  
If your telephone wiring does not have  
a modular jack, you can update the  
wiring yourself or have the telephone  
company update it for you.  
• Do not place the fax machine on a  
rugged surface or on thick carpet  
which might cause a jam when  
you feed a document.  
• Radio Shack stores sell jacks and  
adapters to convert older wiring  
methods to modular wiring.  
• The telephone company charges  
to install the necessary jacks.  
• The USOC number of the jack to  
be installed is RJ11C.  
7
 
43-1204.fm Page 8 Wednesday, August 18, 1999 8:45 AM  
CONNECTING TO  
POWER  
CONNECTING AN  
EXTENSION PHONE OR  
ANSWERING MACHINE  
Plug the power cord into a standard  
grounded three-pin AC outlet.  
To connect an extension telephone or  
answering machine to your fax ma-  
chine, plug one end of a modular cord  
into the EXT. TEL jack on the left side of  
the fax machine. Then plug the cord’s  
other end into the telephone you want  
to use as an extension or into an an-  
swering machine.  
Caution: The polarized 3-pin plug only  
fits in 3-pin outlets. If the AC outlet  
does not have holes for all three pins,  
have an electrician install a properly  
grounded outlet for you.  
Note: Connecting the fax to an an-  
swering machine lets you use the an-  
CONNECTING THE  
HANDSET  
swering  
machine  
feature.  
See  
“Answering Machine Reception” on  
Page 15.  
Plug the handset’s modular plug into  
the HANDSET jack on the left side of the  
fax machine. Place the handset in its  
cradle.  
8
 
43-1204.fm Page 9 Wednesday, August 18, 1999 8:45 AM  
SETTING UP THE FAX MACHINE  
4. Insert the paper end into the  
INSTALLING THE PAPER  
paper exit slot.  
Follow these steps to install the paper  
roll.  
5. Pull out the end of the roll from the  
exit slot until it extends about 4  
inches.  
Note: Use only Radio Shack Cat. No.  
43-1260 or 43-1264 Thermal Fax Pa-  
per in your fax machine.  
1. Open the operation panel.  
6. Close the cover by firmly pressing  
both left and right corners on the  
back of the cover. The TFX-1032  
automatically cuts the extra paper.  
2. Press OPEN to open the paper  
cover.  
PAPER HANDLING  
Thermal paper is heat-sensitive. Fol-  
low these tips while handling it:  
• Store unused thermal paper away  
from high temperatures (158°F or  
over) and high humidity. These  
can darken the paper.  
• Store copies away from direct  
sunlight and at a temperature  
below 94°F. Direct sunlight and  
high heat can fade the image.  
3. Remove any slack from the roll  
and place it in the paper holder in  
the direction shown, with both  
sides seated securely.  
• Avoid storing thermal copies next  
to blueprint (diazo) copies and  
plastic film or binders. The chemi-  
cals in these materials could fade  
the image.  
9
 
43-1204.fm Page 10 Wednesday, August 18, 1999 8:45 AM  
• Avoid applying tape to image  
areas on copies. The chemicals in  
some transparent tape adhesives  
could fade the image.  
If the dial tone continues, you have  
pulse service. Follow these steps to  
set your fax to the pulse dialing mode.  
1. Press MENU four times. The fax  
• Avoid storing two copies with the  
images together. The printed  
image can transfer from one copy  
to the other.  
machine displays:  
4:SET MODE ?  
• Do not touch the thermal paper  
with sweaty or dirty hands.  
2. Press SET, then press MENU twice  
so the fax machine displays:  
3:FEATURE SW. ?  
SETTING THE DIALING  
MODE  
3. Press SET twice so the fax  
The TFX-1032 is factory-set to the  
tone dialing mode. If your telephone  
line uses pulse dialing, you must  
change the dialing mode setting. If you  
are not sure which type of service you  
have, do this test.  
machine displays:  
TONE  
(00)  
4. Press 0 1 to select the pulse mode.  
The fax machine displays:  
1. Lift the handset and listen for a  
dial tone.  
10PPS  
(01)  
2. Press any number other than 0.  
Note: If your phone system  
requires that you dial an access  
code (9, for example) before you  
dial an outside number, do not  
press 0 or the access code.  
5. Press SET to save your selection.  
The fax machine displays:  
(01)PAUSE TIME  
If the dial tone stops, you have tone  
service.  
6. Press STOP/CLEAR twice. The fax  
machine displays the date and  
time (or CHECK PAPER ROLLif  
you have not installed paper).  
10  
 
43-1204.fm Page 11 Wednesday, August 18, 1999 8:45 AM  
2. Press SET, then press MENU twice.  
SETTING THE RINGER  
VOLUME  
The fax machine displays:  
3:FEATURE SW. ?  
Set  
on the fax machine’s left side  
to OFF, M (medium), or H (high) to con-  
trol the ringer volume.  
3. Press SET, then enter 1 7. The fax  
machine displays:  
Note: When you set  
to  
OFF, the  
ringer does not sound. However, the  
fax machine still answers calls and re-  
ceives faxes.  
(17)KEY SOUND  
4. Press SET. The fax machine dis-  
plays the current setting.  
SETTING THE SPEAKER  
VOLUME  
0 0—Off  
0 1—Low  
0 2—High  
Set  
on the left side of the fax ma-  
chine to L (low), M (medium), or H  
(high) to control the fax machine’s  
speaker volume.  
5. Enter your choice. For example,  
enter 0 1 to select low-pitched key  
tones.  
6. Press SET to save the new setting.  
SETTING THE KEY  
ENTRY TONES  
7. Press STOP/CLEAR twice to return  
to the normal display.  
Each time you press a key on the fax  
machine, it sounds a tone. You can set  
the tone to have a high or low pitch, or  
you can turn off the key tones. The de-  
fault setting is a high-pitched tone.  
Follow these steps to change the key  
entry tone setting.  
1. Press MENU four times. The fax  
machine displays:  
4:SET MODE ?  
11  
 
43-1204.fm Page 12 Wednesday, August 18, 1999 8:45 AM  
If you make a mistake, press  
or to position the cur-  
sor in the appropriate place,  
then enter the correct number.  
ENTERING BASIC  
INFORMATION  
Setting the Date and Time  
5. Press SET.  
Set the date and time so they appear in  
the top margin of all transmitted faxes.  
6. Press STOP/CLEAR twice to return  
to the normal display.  
Note: To cancel the date and time set-  
ting procedure, press STOP/CLEAR any  
time before you press SET in Step 5.  
Entering Your Name and  
Phone Number  
1. Press MENU four times. The fax  
You must enter your phone number  
and name before sending faxes, so re-  
ceiving fax machines and their opera-  
tors can identify the fax source.  
machine displays:  
4:SET MODE ?  
Notes:  
2. Press SET. The fax machine dis-  
• It is illegal to send a fax without  
your name (or company name)  
and phone number. The fax  
machine can print this information  
inside or outside the top margin.  
Use feature switch 20 (see “Set-  
ting the Feature Switches” on  
Page 27).  
plays:  
1:TIME SET ?  
3. Press SET again. The fax machine  
displays the currently set date and  
time. The first digit flashes.  
To keep track of what you enter,  
write down all information first.  
02.15 ’95 11:35  
• The phone number can be 20 dig-  
its and the name 24 characters. If  
necessary, abbreviate the name.  
4. Use the number keys to enter the  
month, day, the last two digits of  
the year, the hour, and the min-  
utes.  
To delete extra characters, press  
DELETE.  
Notes:  
To stop the name and phone num-  
ber setting procedure, press STOP/  
CLEAR or pause for longer than 1  
minute any time before Step 7.  
The TFX-1032 uses 24-hour  
format. To enter 1:00 PM, for  
example, enter 1 3 0 0.  
12  
 
43-1204.fm Page 13 Wednesday, August 18, 1999 8:45 AM  
1. Press MENU four times. The fax  
5. Press  
to enter the letter.  
machine displays:  
If you accidentally enter a  
Note:  
wrong character, press  
then press DELETE and enter the  
once,  
4:SET MODE ?  
correct character.  
6. Repeat Steps 4 and 5 to enter the  
complete name (up to 24 charac-  
ters).  
2. Press SET. Then press MENU once.  
The fax machine displays:  
2:STATION CODE ?  
7. Press SET to store the name. The  
fax machine briefly displays:  
3. Press SET. The fax machine dis-  
plays the first 10 characters of the  
name (or nothing if no name is  
set) and the letters A-E.  
STATION TEL No.?  
Then the display blanks or dis-  
plays the currently set telephone  
number.  
:ABCDE  
8. Use the keypad to enter the fax  
machine’s phone number (up to  
20 digits). To enter a dash, press  
SPEED DIAL.  
The blinking block in the left of the  
display indicates where the next  
letter enters. The underscore indi-  
cates the selected letter.  
9. Press SET to store the phone num-  
ber. Then press STOP/CLEAR.  
4. Repeatedly press 5 to select the  
group with the letter you want to  
enter. Then press 2 or 8 to go up  
or down to the line with the letter.  
Finally, press 4 or 6 to position the  
underline under the letter.  
Here is an example.  
Follow these steps to enter My Co. as  
the name and 817-555-1931 as the  
phone number.  
Group 1  
Group 2  
Group 3  
Watch the display as you do this  
Note:  
ABCDE abcde 12345  
FGHIJ fghij 67890  
KLMNO klmno .,:;•  
PQRST pqrst +–/&*  
UVWXY uvwxy #’"()  
example.  
1. Press MENU four times, then press  
SET, MENU, SET.  
2. Press 8 twice.  
3. Press 6 twice.  
Z
z
<>!?=  
13  
 
43-1204.fm Page 14 Wednesday, August 18, 1999 8:45 AM  
4. Press  
. This enters the M.  
SETTING THE RECEIVE  
MODE  
5. Press 5 once.  
6. Press 2 twice.  
7. Press 4 once.  
The fax machine has three receive  
modes: automatic, manual, and an-  
swer.  
8. Press  
. This enters the y.  
9. Press 0. This enters the space.  
10. Press 5 twice.  
Reception  
Mode  
AUTO  
Indicator  
ANS.  
Indicator  
11. Press 6 twice.  
Automatic  
Manual  
On  
Off  
Off  
Off  
12. Press  
. This enters the C.  
13. Press 5 once.  
14. Press 8 twice.  
15. Press 4 once.  
Answering  
Machine  
Off  
On  
Each time you press Rx.MODE, the re-  
ceive mode changes.  
16. Press  
. This enters the o.  
17. Press 5 once.  
18. Press 8 twice.  
Manual Reception  
19. Press  
. This enters the period.  
If you most often use your fax machine  
as a regular telephone, select manual  
reception.  
20. If necessary, repeatedly press  
DELETE to delete extra letters in an  
old stored name.  
When the phone rings, pick up the  
handset. If it is a voice call, talk as usu-  
al. If it is a fax call:  
21. Press SET.  
22. Press 817 SPEED DIAL 555 SPEED  
DIAL 1931.  
• If feature switch 54 is turned on  
23. If necessary, repeatedly press  
DELETE to delete extra digits in an  
old stored number.  
(see  
“Setting  
the  
Feature  
Switches” on Page 27), the fax  
machine automatically switches to  
receive the fax when it detects the  
fax tones. Hang up the handset.  
24. Press SET. Then press STOP/  
CLEAR.  
• If feature switch 54 is turned off,  
press START when you hear the  
fax tones. Then hang up the hand-  
set.  
14  
 
43-1204.fm Page 15 Wednesday, August 18, 1999 8:45 AM  
Automatic Reception  
Answering Machine  
Reception  
In this mode, when a call comes in,  
your fax machine automatically an-  
swers.  
Use this mode when you connect an  
answering machine to EXT. TEL and  
want to receive both phone messages  
and faxes while you are away.  
Note: You use feature switch 07 (see  
“Setting the Feature Switches” on  
Page 27) to set how many rings occur  
before the fax machine answers.  
Set your answering machine to answer  
calls within 4 rings. Otherwise, the fax  
machine answers after 40 seconds  
and sounds fax tones.  
After the fax machine answers:  
• If the fax machine detects fax  
tones, it receives the document.  
When someone calls, the answering  
machine answers the call and plays  
your announcement. If the fax machine  
detects fax tones during the announce-  
ment, it disconnects the answering  
machine and receives the fax.  
• If the call is a voice call, the caller  
continues to hear several simu-  
lated ring signals. Then the fax  
machine starts to sound fax tones.  
Notes:  
Notes:  
With feature switch 09, you  
can change the number of  
simulated rings that sound  
after the line connects to no  
rings (position 00) or between  
3 and 11 rings. If you set this  
switch to 00, the fax machine  
does not sound simulated  
rings, and answers callers  
with a fax tone.  
• If there are 6 seconds of silence,  
the fax machine begins sounding  
fax tones.  
• In your outgoing announcement,  
tell callers to press START on their  
fax machine to send a fax.  
• Automatic switching might not  
function properly on certain  
answering systems.  
If the call is long distance, the  
caller is charged from the time  
the simulated rings start, even  
if they hang up as soon as  
they hear the fax tones.  
You might have trouble retrieving  
answering machine messages  
from a remote phone if you con-  
nect it to the fax machine. Try set-  
ting the fax machine to the manual  
reception mode and feature switch  
54 to 01 (ON).  
15  
 
43-1204.fm Page 16 Wednesday, August 18, 1999 8:45 AM  
TELEPHONE OPERATION  
The fax machine is factory-set with a  
music-on-hold feature. See “Setting  
the Feature Switches” to turn this fea-  
ture on and off.  
MAKING CALLS  
Note: You must connect the power  
cord to an AC outlet to make calls from  
the fax machine.  
1. Press DIAL, or lift the handset.  
USING REDIAL  
2. Dial the number you want to call.  
The redial function lets you quickly dial  
the last number dialed. Follow these  
steps to redial the number.  
3. If you pressed DIAL in Step 1, lift  
the handset and talk when the call  
is answered.  
1. Press DIAL, or lift the handset. Lis-  
ten for a dial tone.  
2. Press REDIAL/PAUSE. The fax  
machine automatically redials the  
last number dialed.  
ANSWERING A CALL  
When the telephone rings, lift the  
handset and talk.  
Note: If you hear a fax tone, someone  
is trying to send you a fax. If feature  
switch 54 is turned on, hang up the  
handset after the fax machine displays  
RECEIVING. The fax machine auto-  
matically receives the fax. If feature  
switch 54 is turned off, press START  
then hang up the handset. See “Set-  
ting the Feature Switches” on Page 27.  
ADDING A PAUSE  
On some telephone systems, you must  
dial an access number (9, for example)  
for an outside line. You can add a  
pause for redialing or memory-dialing  
so dialing pauses for about 3 seconds  
after the access number. This gives  
the outside line time to connect.  
Note: You can change the pause de-  
lay time using feature switch 01.  
PUTTING A CALL ON  
HOLD  
To add a pause for redial, enter the ac-  
cess number, press REDIAL/PAUSE, and  
enter the phone number.  
To put a call on hold, press HOLD.  
Press HOLD again to resume the con-  
versation.  
To add a pause for memory dialing, fol-  
low the above procedure when you  
store a number in memory (see “One-  
Touch Dialing” and “Speed Dialing”).  
Note: You can place the handset on  
the cradle, if desired. To resume the  
conversation, lift the handset.  
16  
 
43-1204.fm Page 17 Wednesday, August 18, 1999 8:45 AM  
Name and Phone Number” on  
Page 12 to see how to enter char-  
acters.  
ONE-TOUCH DIALING  
You can store up to eight telephone  
numbers in the one-touch memories.  
You can then dial a stored number at  
the touch of a single button.  
6. Press SET.  
7. Enter the telephone number, up to  
32 digits.  
Notes:  
Storing a Number in a One-  
Touch Memory  
• Press SPEED DIAL to enter a  
hyphen (for easy viewing).  
Press REDIAL/PAUSE to enter a  
pause (a semi-colon appears  
on the display). The hyphen or  
pause counts as one digit in the  
memory.  
1. Press MENU three times. The fax  
machine displays:  
3:O.T & S.D SET?  
• If you make a mistake in enter-  
ing a fax/phone number, use  
to move the cursor over the  
wrong digit, press DELETE to  
delete the digit, then enter the  
correct digit.  
2. Press SET. The fax machine dis-  
plays:  
O.T No. = 1 ?  
To stop programming, press  
3. Press the one-touch key (1–8) you  
want to store the number in.  
STOP/CLEAR.  
8. Press SET.  
4. Press SET. If the memory is empty,  
the fax machine displays:  
9. To program other one-touch num-  
bers, repeat Steps 3–8. Other-  
wise, press STOP/CLEAR.  
:ABCDE  
Dialing a One-Touch Number  
Otherwise, the fax machine dis-  
plays the first 10 characters of the  
name and CHANGE.  
1. Press DIAL or lift the handset. Lis-  
ten for a dial tone.  
Note: If a name appears, press  
SET to change the name or STOP/  
CLEAR to cancel number storage.  
2. Press the one-touch key (1-8) for  
the number you want to call.  
When the call is answered, lift the  
handset, if necessary, and talk.  
5. Enter the contact’s name (up to 16  
characters). See “Entering Your  
17  
 
43-1204.fm Page 18 Wednesday, August 18, 1999 8:45 AM  
When storing or making test calls to  
emergency numbers:  
4. Press SET. If the memory is empty,  
the fax machine displays:  
• Remain on the line and briefly  
explain to the dispatcher the rea-  
son for the call.  
:ABCDE  
• Perform such activities in the off-  
peak hours, such as early morn-  
ing or late evening.  
Otherwise, the fax machine dis-  
plays the first 10 characters of the  
stored name and CHANGE.  
Note: If a name appears, press  
SET to change the name or press  
STOP/CLEAR to cancel number  
storage.  
SPEED DIALING  
You can store up to 20 telephone num-  
bers in memory then dial a stored num-  
ber by entering a two-digit memory-  
location code.  
5. Enter the contact’s name (up to 16  
characters). See “Entering Your  
Name and Phone Number” on  
Page 12 to see how to enter char-  
acters.  
Storing a Number in Speed-  
Dial Memory  
6. Press SET.  
7. Enter the telephone number, up to  
32 digits.  
1. Press MENU three times. The fax  
machine displays:  
Notes:  
• Press SPEED DIAL to enter a  
hyphen (for easy viewing).  
Press REDIAL/PAUSE to enter a  
pause (a semi-colon appears).  
The hyphen or pause counts as  
one digit in memory.  
3:O.T & S.D SET?  
2. Press SET. The fax machine dis-  
plays:  
O.T No. = 1 ?  
• If you make a mistake in enter-  
ing a number, use  
to move  
the cursor over the wrong digit,  
press DELETE to delete the digit,  
then enter the correct digit.  
3. Use the number keys to enter a  
two-digit speed-dial number (01–  
20). For example, enter 1 0 to store  
a number in speed-dial memory  
10.  
To stop programming, press  
STOP/CLEAR.  
SET.  
8. Press  
18  
 
43-1204.fm Page 19 Wednesday, August 18, 1999 8:45 AM  
9. Repeat Steps 3–8 to program  
other numbers. Otherwise, press  
STOP/CLEAR.  
PRINTING A MEMORY  
NUMBER LIST  
Follow these steps to print a list of the  
one-touch and speed-dial numbers  
stored in the fax machine.  
Dialing a Speed-Dial Memory  
Number  
1. Press MENU three times. The fax  
1. Press DIAL or lift the handset. Lis-  
machine displays:  
ten for a dial tone.  
3:O.T & S.D SET?  
2. Press SPEED DIAL, then enter the  
two-digit speed-dial memory num-  
ber (01-20) you want to call.  
2. Press COPY. The fax machine dis-  
plays:  
CLEARING ONE-TOUCH /  
SPEED-DIAL MEMORIES  
O.T & S.D LIST  
1. Press MENU three times. The fax  
and prints a list of all stored num-  
bers.  
machine displays:  
3:O.T & S.D SET?  
2. Press SET.  
3. Press the one-touch key or enter  
the speed-dial memory number of  
the memory you want to clear.  
4. Press SET. The fax machine dis-  
plays the name and CHANGE.  
5. To clear the entry, press MENU.  
The fax machine displays CAN-  
CEL.  
6. Press SET to clear the memory.  
Repeat Steps 3–5 to clear other  
memories.  
7. Press STOP/CLEAR.  
19  
 
43-1204.fm Page 20 Wednesday, August 18, 1999 8:45 AM  
FAX OPERATION  
PREPARING A  
DOCUMENT  
MAKING A COPY  
You can copy a document to check  
how it will be received, or to check the  
fax machine’s operation.  
The quality of the copy at the receiving  
fax machine depends on the quality of  
the original document you send. Do  
not try to send documents that are:  
1. Place the original document (up to  
10 pages) face down in the paper  
tray. The fax machine automati-  
cally draws in the first page.  
• Wet or damp  
• Covered with wet ink or paste  
2. Select a contrast/resolution mode,  
if necessary. See “Setting the  
Contrast/Resolution” on Page 21.  
• Chemically processed (such as  
pressure-sensitive paper or car-  
bon-coated paper)  
Note: For copying, the fax  
machine uses fine or superfine  
resolution only. The fax machine  
uses the fine setting if the resolu-  
tion is set to STD.  
• Coated (such as glossy paper)  
Too thin (such as onionskin, air-  
mail paper, or magazine pages)  
• Curled or folded  
3. Press COPY. The fax machine dis-  
• Made of cloth or metal  
plays:  
• Larger or smaller than the allow-  
able document size (maximum  
size 81/2 × 59 inches, minimum  
size 57/8 × 57/8 inches)  
Note: If a document is exactly 81/2  
inches wide, 1/4 inch on both sides  
might not fax properly.  
ZOOM RATE ? 100 %  
Note: If you do not need to make  
an enlarged or reduced copy, skip  
to Step 5.  
4. Press COPY to select the desired  
zoom mode. Each time you press  
the key, the display changes in this  
order, 125%80%100%.  
To send a document of poor quality,  
make a photocopy of the original. Then  
fax the copy.  
Note: You can turn off the zoom  
option. See “Setting the Feature  
Switches” on Page 27.  
Caution: Remove staples and paper  
clips from documents you want to  
send. These could damage the fax ma-  
chine.  
5. Press START. The fax machine  
starts to copy. It cuts each page  
as it exits the fax machine.  
20  
 
43-1204.fm Page 21 Wednesday, August 18, 1999 8:45 AM  
SENDING A FAX  
SETTING THE  
CONTRAST /  
RESOLUTION  
1. Place the original document (up to  
10 pages) face down in the paper  
tray. The fax machine automati-  
cally draws in the first page.  
Set the contrast and resolution for the  
document you want to send.  
Note: A document must be in the pa-  
per tray before you can change these  
settings.  
Setting the Contrast  
Repeatedly press CONTRAST to select:  
NORMALFor normal documents.  
LIGHTFor light documents.  
2. Select a contrast/resolution mode  
if necessary. See “Setting the  
Contrast/Resolution.”  
3. With the handset on hook, either  
manually enter, redial, one-touch  
memory dial, or speed dial the  
number.  
HALFTONEFor photos or originals  
with shades of gray. (The resolution is  
automatically set to FINE.)  
Note: If you make a mistake when  
entering a phone number, press  
STOP/CLEAR, then enter the correct  
number.  
Setting the Resolution  
Repeatedly press RESOLUTION to se-  
lect:  
4. Press START to dial the number.  
When the other fax machine  
answers, transmission begins.  
STDFor most documents.  
FINEFor small print or print from a  
dot-matrix printer.  
STOP/CLEAR to interrupt a  
Note: Press  
transmission or to remove a document  
set for transmission.  
SUPERFINEFor text with very  
small characters or graphics.  
21  
 
43-1204.fm Page 22 Wednesday, August 18, 1999 8:45 AM  
Notes:  
SENDING  
• Superfine only works with fax  
machines that have the ITU-T  
standard superfine feature. If the  
receiving fax machine does not  
have this feature, the fax is sent  
using fine resolution.  
INTERNATIONAL FAXES  
When you send faxes to other coun-  
tries, poor phone line quality might  
cause transmission errors. The over-  
seas feature helps reduce these er-  
rors.  
You can set the fax machine to  
remain in the selected modes or  
to return to the default modes  
after each fax. See “Setting the  
Feature Switches” on Page 27.  
After placing the document, press  
SPEED DIAL then #. When the fax ma-  
chine displays OVERSEAS Tx SET,  
dial the number as usual.  
You can also use this feature for local  
faxes if you get frequent errors.  
FAX REDIALING  
If a dialed number is busy, the fax ma-  
chine hangs up, waits 3 minutes, then  
redials the number up to the number of  
times you set with feature switch 06.  
See “Setting the Feature Switches” on  
Page 27.  
To manually redial, press REDIAL/  
PAUSE.  
22  
 
43-1204.fm Page 23 Wednesday, August 18, 1999 8:45 AM  
Connected to Another Jack  
RECEIVING FAXES  
USING AN EXTENSION  
TELEPHONE  
Before you use this feature, you must:  
• Set feature switch 57 to 01 (ON).  
The default setting is OFF. See  
“Setting the Feature Switches” on  
Page 27.  
This feature lets you receive a fax after  
answering a telephone call on an ex-  
tension telephone, either connected to  
the fax machine or to a jack that uses  
the same line as the fax machine.  
• Set the fax machine to either the  
manual or automatic receive  
mode. This feature does not work  
if you set the fax machine to the  
answering machine reception  
mode.  
Connected to the Fax  
Machine  
Before you use this feature, you must:  
To switch to receive a fax during a call  
on an extension phone, press * then #  
on the extension phone. The fax ma-  
chine prepares to receive a fax. When  
you hear fax tones, hang up the phone.  
• Confirm feature switch 08 is set to  
something other than 00 (OFF).  
The number you select is also the  
number you dial to receive a fax.  
The default setting is 33. See  
“Setting the Feature Switches” on  
Page 27.  
Notes:  
• If you answer a voice call on an  
extension phone while the fax  
machine is sounding simulated  
rings, you can stop the fax  
machine by pressing * then # on  
the extension phone.  
• Set the fax machine to either the  
manual or automatic reception  
mode (see “Setting the Receive  
Mode” on Page 14). This feature  
does not work if you set the fax  
machine  
machine reception mode.  
to  
the  
answering  
You cannot use this feature from a  
pulse-dialing extension phone.  
• This feature might not function  
properly on certain telephones.  
To switch to receive a fax during a call  
on a telephone connected to the fax  
machine, dial the number you selected  
with feature switch 08. The fax ma-  
chine disconnects the phone and pre-  
pares to receive a fax. Hang up the  
phone.  
• Callers can also use this feature  
by pressing * then # on their  
touch-tone phone.  
23  
 
43-1204.fm Page 24 Wednesday, August 18, 1999 8:45 AM  
VOICE CONTACT  
REQUESTING A FAX  
FROM ANOTHER  
MACHINE (POLLING)  
Requesting a Voice Contact  
After you receive or send a document,  
you might want to talk to the person at  
the transmitting/receiving fax machine.  
To do so, simply lift the handset while  
the fax machine is sending or receiving  
the document.  
Your fax machine lets you call a re-  
mote, unattended fax machine and re-  
quest that it send a document to you.  
The remote machine must be set to  
send the document before you call,  
and must use ITU-T compatible poll-  
ing.  
When sending or receiving is com-  
plete, the other fax machine rings or  
sounds tones. When the other party  
comes on the line, begin your conver-  
sation.  
Note: Your TFX-1032 fax machine  
cannot be polled.  
1. Press MENU. The fax machine dis-  
plays:  
Notes:  
• If you hang up the handset before  
fax operation is complete, the  
voice contact request is cancelled.  
POLLING Rx ?  
2. Press SET. The fax machine dis-  
• If the other party does not pick up  
their handset within 10-15 sec-  
onds, the phone line disconnects.  
plays:  
PARTY ?  
• If the other fax machine does not  
have the voice contact function,  
the phone line disconnects.  
3. Call the remote fax machine. You  
can use manual, one-touch mem-  
ory, or speed dialing.  
Answering a Voice Contact  
Request  
4. Press SET. The fax machine  
begins dialing. When the line con-  
nects, reception automatically  
begins.  
If your fax machine beeps and displays  
PHONE CALLING immediately after  
you send or receive a document, the  
other party is requesting voice contact.  
Pick up the handset and begin the con-  
versation.  
24  
 
43-1204.fm Page 25 Wednesday, August 18, 1999 8:45 AM  
LIMITING FAX  
RECEPTION  
ACTIVITY REPORTS  
The activity report shows up to 20 of  
the most recent transmissions/recep-  
tions, including any error codes.  
You can set the fax machine to check  
the other party’s fax number and only  
receive a fax if the number exactly  
matches one stored in your fax ma-  
chine’s one-touch or speed dialing  
memories.  
1. Press MENU twice. The fax  
machine displays:  
2: ACT. REPORT ?  
Note: Even a stored number cannot be  
received if the other fax machine does  
not have a fax identification feature or  
if the fax number has not been pro-  
grammed into their fax machine.  
Check with the other parties before  
setting this function.  
2. Press COPY. The fax machine dis-  
plays:  
ACTIVITY REPORT  
and prints the report.  
To turn on this feature, set feature  
switch 26 to 01 (ON). To turn off this  
feature, set feature switch 26 to 00  
(OFF). The default is off. See “Setting  
the Feature Switches” on Page 27.  
You can set the fax machine to print a  
transmission report after each fax by  
setting feature switch 31. See “Setting  
the Feature Switches” on Page 27.  
Sample Activity Report  
25  
 
43-1204.fm Page 26 Wednesday, August 18, 1999 8:45 AM  
Error Codes  
The following error codes print on the activity and transmission reports to help you  
troubleshoot problems.  
ERROR CODE  
DESCRIPTION  
• No error encountered.  
OK  
E-10  
• Other fax machine did not respond. Contact the other party  
and confirm you are dialing the correct fax number.  
• Be sure you connected the telephone line to the fax  
machine’s LINE jack.  
E-20  
E-21  
You pressed STOP/CLEAR.  
• The original document jammed. Remove the document and  
correctly place it in the tray.  
E-23  
E-24  
E-25  
• Paper ran out during reception. Replace the paper.  
• Paper jammed during reception. Check the paper.  
• Cutter did not operate. Contact your local Radio Shack  
store for service assistance.  
E-30  
E-40  
E-50  
• Print quality poor due to telephone interference. If this code  
frequently appears, contact your local phone company.  
• The other party’s fax machine had a problem (out of paper,  
paper jam, or similar).  
• Fax was stopped by the other party (line disconnected dur-  
ing a fax transmission).  
E-60  
E-71  
• Communication impossible due to poor phone line quality.  
• Communication impossible due to compatibility problems or  
the limited fax reception feature is turned on. Contact the  
other party, or confirm feature switch 26 is set to 00 (OFF).  
26  
 
43-1204.fm Page 27 Wednesday, August 18, 1999 8:45 AM  
SETTING THE FEATURE SWITCHES  
Your fax machine has several features you turn on and off using the built-in feature  
switches. The following table lists the feature switches, available settings, default  
settings, and the page where the feature is discussed.  
Feature  
Switch  
Settings  
(*Default)  
Description  
See Page  
00  
01  
Dial Mode  
*00Tone  
01Pulse  
10  
Amount of time (in seconds) the 022 seconds  
16  
fax machine pauses for pause *033 seconds  
entries  
044 seconds  
055 seconds  
066 seconds  
077 seconds  
088 seconds  
099 seconds  
1010 seconds  
1111 seconds  
1212 seconds  
06  
07  
Number of automatic redial  
attempts  
00Off  
22  
15  
011 time  
*022 times  
033 times  
Number of rings before the fax  
00Short ring  
machine answers when set to the 011 ring  
auto mode  
022 rings  
033 rings  
044 rings  
*055 rings  
|
1111 rings  
08  
Remote reception activation code 00Off  
10-99Select a two-digit  
23  
number (default is 33)  
27  
 
43-1204.fm Page 28 Wednesday, August 18, 1999 8:45 AM  
Feature  
Settings  
(*Default)  
Description  
Switch  
See Page  
09  
Number of simulated rings that  
00Off  
15  
the fax machine sounds when set 013 rings  
to automatic reception before  
switching to fax reception  
025 rings  
*037 rings  
049 rings  
0511 rings  
10  
17  
Music on hold  
00Off  
*01On (Greensleeves)  
16  
11  
Key entry tones  
00Off  
01Low  
*02High  
20  
Selects whether your name and *01Outside  
phone number print inside or out- 02Inside  
side the fax margin  
12  
26  
27  
Limited fax reception  
*00Off  
01On  
25  
Resolution setting that the fax  
machine returns to after trans-  
missions  
00STD  
01FINE  
02SUPERFINE  
*03No return  
21/22  
28  
31  
Contrast setting that the fax  
machine returns to after trans-  
missions  
00NORMAL  
01LIGHT  
02HALFTONE  
*03No return  
21/22  
25  
Transmission report  
Halftone quality  
*00Off  
01After each fax  
02After error  
36  
50  
54  
57  
00Faster  
*01Slower/better quality  
21/22  
20  
Copy enlargement/reduction  
option (zoom rate)  
00Off  
*01On  
Automatic fax sensing  
00Off  
*01On  
15  
Parallel phone connection  
*00Off  
23  
01On  
28  
 
43-1204.fm Page 29 Wednesday, August 18, 1999 8:45 AM  
Follow these steps to change feature  
switch settings.  
Repeat Steps 5-8 to make addi-  
tional changes.  
1. Press MENU four times. The fax  
9. Press STOP/CLEAR twice when you  
machine displays:  
finish.  
Notes:  
4: SET MODE ?  
To print a feature switch setting  
list, press COPY after Step 3.  
2. Press SET. The fax machine dis-  
To stop the feature switch setting  
plays:  
procedure, press  
twice.  
STOP/CLEAR  
1: TIME SET ?  
3. Press MENU twice. The fax  
machine displays:  
3: FEATURE SW ?  
4. Press SET. The fax machine dis-  
plays:  
(00) DIAL MODE  
5. Enter the number of the switch  
you want to change. For example,  
press 2 and 6 to change the lim-  
ited fax reception feature.  
6. Press SET. The fax machine dis-  
plays the current setting.  
7. Enter the desired setting. For  
example, enter and to select  
0
1
ON to turn on the limited fax  
reception feature.  
8. Press SET.  
29  
 
43-1204.fm Page 30 Wednesday, August 18, 1999 8:45 AM  
PROBLEM SOLVING  
If problems occur during operation, check below before taking the fax machine for  
service. If the problem still exists, contact your local Radio Shack store for help.  
Symptoms  
Possible Cause/Solution  
AC plug not connected.  
Fax machine does not operate.  
The fax machine displays CHECK Paper not properly installed. See “Clearing a  
PAPER ROLL.  
Paper Jam” on Page 32  
The recording paper has run out. See “Clear-  
ing a Document Jam” on Page 32  
The document you are sending is not prop-  
erly set in the tray.  
The fax machine displays ORIGI-  
NAL JAM.  
You cannot insert a document.  
Document is too thin or too thick.  
Another document is jammed. See “Clearing  
a Document Jam” on Page 32.  
You set more than 10 sheets on the input  
tray.  
Cannot send a fax.  
Document is not set far enough into the slot.  
Paper ran out on the receiving fax machine.  
The receiving fax machine is set for manual  
reception.  
EXT.TEL  
You connected the telephone line to  
LINE  
instead of  
.
Fax machine does not answer the  
phone.  
Fax machine is set for manual reception. Lift  
START  
the handset and press  
receiving the fax.  
to begin  
AC cord is not connected.  
The paper has run out.  
Fax reception does not begin after  
the fax machine answers.  
Limited fax reception is turned on.  
The paper has run out.  
EXT.TEL  
You connected the telephone line to  
LINE  
instead of  
.
The received fax is not dark enough. You are not using the recommended fax  
paper.  
The transmitted original might be light.  
Received fax is blank.  
The paper is loaded upside-down.  
The transmitted original was upside-down.  
Received copy has distorted sec-  
tions  
Phone line or original document quality is  
poor.  
Line on edge of fax.  
Paper roll is near the end.  
30  
 
43-1204.fm Page 31 Wednesday, August 18, 1999 8:45 AM  
Symptoms  
Possible Cause/Solution  
Error indicator lights.  
Press STOP/CLEAR to turn off the error light.  
Print an activity report and check the error  
code.  
No dial tone.  
The telephone line is not properly con-  
nected.  
Sound from speaker is too low.  
Cannot hear rings.  
Monitor volume switch is set to L.  
Ringer volume is set to OFF.  
Fax/phone calls do not go through. Dialing mode is not set correctly.  
Cannot make a phone call.  
Telephone does not ring.  
A fax is being sent or received.  
Too many phone devices are connected to  
the same line.  
Remote reception does not work  
with phone connected to the fax  
machine.  
Fax machine set to answer mode.  
Remote reception feature switch (08) is  
turned off.  
You started the call from the extension  
phone. Press START on the fax machine.  
Remote reception does not work  
Parallel phone connection feature switch (57)  
with phone connected to same line is turned off.  
as the fax machine.  
Fax machine set to answer mode.  
You started the call from the extension  
phone. Press START on the fax machine.  
31  
 
43-1204.fm Page 32 Wednesday, August 18, 1999 8:45 AM  
CLEARING A  
DOCUMENT JAM  
CLEARING A PAPER  
JAM  
The fax machine beeps and displays  
ORIGINAL JAMif the document you  
are sending jams. If the ERROR indi-  
cator lights, press STOP/CLEAR first.  
Then follow these steps to clear the  
jam.  
The fax machine beeps and displays  
CHECK PAPER ROLLwhen the pa-  
per jams. Follow these steps to clear  
the jam.  
1. Lift the cover.  
1. Open the cover.  
2. Raise the document release lever.  
2. Press OPEN to open the paper  
cover.  
3. Remove the jammed document  
while pressing the green release  
lever.  
3. Remove the jammed paper.  
4. Cut off the jammed section of the  
paper and reinsert the roll.  
4. Reposition the release lever and  
close the cover.  
5. Close the cover by firmly pressing  
both left and right corners on the  
back of the cover. The fax  
machine automatically cuts the  
extra paper.  
32  
 
43-1204.fm Page 33 Wednesday, August 18, 1999 8:45 AM  
CLEANING DOCUMENT  
FEED ROLLER ONE  
CLEANING DOCUMENT  
FEED ROLLER TWO  
If document jams frequently occur or if  
the fax machine feeds more than one  
sheet at a time, clean document feed  
roller one with a cotton swab damp-  
ened with a small amount of a deter-  
gent.  
If a streak or dirty pattern appears on a  
copy or a fax you have sent, clean doc-  
ument feed roller two with a soft, clean,  
slightly damp cloth.  
1. Open the cover.  
1. Open the cover then pull the docu-  
ment release lever as shown in  
the figure.  
2. To rotate document feed roller two,  
press the document sensor, as  
shown.  
2. To rotate document feed roller  
one, press the document sensor,  
as shown.  
3. Clean document feed roller two,  
then dry it thoroughly to keep doc-  
uments from jamming.  
3. Clean document feed roller one,  
then dry it thoroughly to keep doc-  
uments from jamming.  
4. Close the cover.  
4. Replace the document release  
lever and close the cover.  
33  
 
43-1204.fm Page 34 Wednesday, August 18, 1999 8:45 AM  
CARE AND MAINTENANCE  
Your Radio Shack TFX-1032 Fax Machine with Automatic Cutter is an example of  
superior design and craftsmanship. The following suggestions will help you care for  
your fax machine so you can enjoy it for years.  
Keep the fax machine dry. If it gets wet, wipe it dry. Liquids might con-  
tain minerals that can corrode electronic circuits. If a liquid enters the  
fax machine, immediately unplug the AC power cord. Do not turn on  
the fax machine. Contact your local Radio Shack store for service.  
Use and store the fax machine only in normal temperature environ-  
ments. Temperature extremes can shorten the life of electronic de-  
vices, discolor receiving paper, and distort or melt plastic parts.  
Handle the fax machine gently and carefully. Dropping it can damage  
circuit boards and cases and can cause the fax machine to work im-  
properly.  
Keep the fax machine away from dust and dirt, which can cause pre-  
mature wear of parts.  
Wipe the fax machine with a damp cloth occasionally to keep it look-  
CLEANER  
ing new. Do not use harsh chemicals, cleaning solvents, or strong de-  
tergents.  
Modifying or tampering with the fax machine’s internal components can cause a  
malfunction and might invalidate its warranty and void your FCC authorization to op-  
erate it. If the fax machine is not performing as it should, take it to your local Radio  
Shack store for assistance. If the trouble is harming the telephone lines, the tele-  
phone company might ask you to disconnect the fax machine until you resolve the  
problem.  
34  
 
43-1204.fm Page 35 Wednesday, August 18, 1999 8:45 AM  
SPECIFICATIONS  
Paper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81/2 inches × 98 feet  
216 mm × 30 meters  
Effective Scanning Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81/3 Inches (212 mm)  
Effective Recording Width . . . . . . . . . . . . . . . . . . . . . . . . . . . 81/3 Inches (212 mm)  
Transmission Speed . . . . . . . . . . . . . . . . . . . . . . . . . . 9600/7200/4800/2400 BPS  
Transmission Time . . . . . . About 20 seconds/page (Standard Transmission Mode)  
Main Scanning Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pels  
Sub Scanning Density . . . . . . . . . . . . . . . . . . . . . . 3.85 lines/mm (Standard mode)  
7.7 lines/mm (Fine mode)  
15.4 lines/mm (Superfine mode)  
Compression Mode . . . . . . . . . . . . . . . . . . . . MH (Modified Huffman) and Original  
Reading Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact Image Sensor  
Recording Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Printing  
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 50/60 Hz  
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standby: 5 W  
Transmission: 20 W  
Reception: 130 W  
Copy: 150 W  
Overall Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31/2 × 15 × 103/8 Inches  
(90 × 381 × 263 mm)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 lbs, 6 oz (4.3 kg)  
Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41–95°F (5–35°C)  
Specifications are typical; individual units might vary. Specifications are subject to  
change and improvement without notice.  
35  
 
43-1204.fm Page 36 Wednesday, August 18, 1999 8:45 AM  
RADIO SHACK LIMITED WARRANTY  
This telephone product is warranted against manufacturing defects in material and  
workmanship for 90 days from the date of purchase from Radio Shack company owned  
stores and authorized Radio Shack franchisees and dealers. Within this period Radio  
Shack will repair the telephone product without charge for parts and labor. Simply bring  
your Radio Shack sales slip as proof-of-purchase date to any Radio Shack store.  
This warranty does not cover damage or failure caused by or attributable to Acts of God,  
abuse, misuse, improper or abnormal usage, faulty installation, improper maintenance,  
lightning or other incidence of excess voltage, or any repairs other than those provided  
by a Radio Shack Authorized Service Facility, or transportation costs. Radio Shack is  
not responsible or liable for indirect, special, or consequential damages arising  
out of or in connection with the use or performance of the product or other dam-  
ages with respect to loss of property, loss of revenues or profit, or costs of  
removal, installation or reinstallation.  
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO EXPRESS WARRAN-  
TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA-  
TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states  
do not allow the limitation or exclusion of incidental or consequential damages and  
some states do not allow limitation or exclusion of implied warranties; therefore, the  
aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. There will be  
charges rendered for repairs to the product made after the expiration of the aforesaid 90  
days warranty period.  
This warranty gives you specific legal rights and you may also have other rights which vary from  
state to state.  
We Service What We Sell  
9/94  
RADIO SHACK  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
7A5  
Printed in Japan  
 

Radio Shack Automobile Accessories 60 4395 User Guide
Ricoh Digital Camera RDC 5000 User Guide
Rosewill Switch RC 409LX User Guide
Ryobi Saw BTS15 User Guide
Samsung Automobile GH68 13098A User Guide
Samsung Computer Monitor 2033SN User Guide
Samsung Laptop S3C2440A User Guide
Sansui Flat Panel Television HDLCD3200 User Guide
Sanyo Cell Phone MM 5600 User Guide
Sears Treadmill 63129739 User Guide