RSA Lighting Indoor Furnishings 62 14410001 User Guide

DESCRIPTION  
Catalog #  
Project  
Type  
Date  
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable  
for downlighting and accent applications. Utilizes SIX (6) PAR20 Metal Halide  
lamps.  
Comments  
Prepared by  
For new construction applications. Insulation must be kept 3” from all sides  
and at least 1” above the housing.  
SPECIFICATION FEATURES  
A... Housing  
is also UL listed as ‘access above ceiling is secured with threadless, bayonet ac-  
Housing, junction box & trim assembly  
are all steel construction. Fixture utilizes  
a removable trim sleeve to provide a  
0.75” flange around the ceiling opening  
and to help conceal the inner hardware  
of the fixture from sight below the ceiling.  
Can accommodate 0.50” to 1.25” ceiling  
thickness. Optional Chicago Plenum  
configuration available.  
not required’.  
tion. Optional retractable arm is available  
for lamp pulldown and extreme aiming.  
Includes Med. base sockets.  
COMBOLIGHT®  
Next Generation  
Recessed  
D... Electrical  
Electrical accessible through ceiling  
opening. J-Box located on the side wall  
F ... Mounting  
of the housing behind removable access Butterfly Brackets accept 1/2” EMT,  
Multi-Lamp Fixture  
doors. Integral electronic metal halide  
C Channel, Tbar fasteners, and bar  
ballasts on individually removable “trays” hangers. Four tabs on housing for  
for easy maintenance. May also be con-  
figured for remote power.  
securing to structure.  
Six (6) Light  
PAR20 Metal Halide  
G... Labels  
B... System Protection:  
cULus listed for non-type IC  
applications, suitable for use in damp  
locations.  
Thermal protection provided to guard  
against overheating and misuse of  
insulation over and around fixture. Vent  
E ... Lamps  
Six (6) PAR20 Metal Halide lamps mounted  
in adjustable double gimbals. Lamp holders  
holes in housing provide cooler operation. are individually removable and may be re-  
gressed 1” for additional cut-off. Lamp can  
New Construction  
Housing  
w/ 0.75” Trim Flange  
Ceiling Cut-Out: 5.44” x 28.67”  
C... Junction Box  
accept up to three optical accessories (i.e.  
lens + hex louver + snoot). 45º x 45º locking  
lamp adjustment. Beveled-edge lamp ring  
Junction Box is UL listed for through  
branch wiring, 6 #12 90º C supply con-  
ductors or 60º C for end of run. The fixture  
44.59”  
15.01”  
7.45”  
6.14”  
29.37”  
40.46”  
27.87”  
Double  
Gimbal  
4.64”  
45º x 45º  
Adjust  
4.65”  
Thermal  
Protector  
Integral Electronic  
Metal Halide Ballasts  
For use with 20W or 39W PAR20MH lamps.  
ORDERING INFORMATION  
C6  
E
T
Configuration  
Lamp Type / Wattage Label  
Power Supply  
Lamp Mechanism  
Trim Finish  
C6 = COMBOLIGHT  
Recessed Six (6) Light  
020M20 = 20 Watt PAR20 Metal Halide  
Voltage  
G = Double Gimbal  
W = White  
039M20 = 39 Watt PAR20 Metal Halide  
1
2
= 120V  
= 277V  
= Retractable Double Gimbal  
B
S
= Black  
R
= Industrial Silver  
Housing  
Power Supply  
Trim Flange  
T = 0.75” Trim Flange  
Housing Interior/Electrical Door/Sleeve  
N = New Construction  
E = Electronic Metal Halide  
Finish  
C = Chicago Plenum  
Ballast  
W = White  
B
S
= Black  
= Industrial Silver  
rev 022408  
Specifications and Dimensions subject to change without notice.  
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031  
 

Quantum Switch ATL M Series User Guide
Rangemaster Beverage Dispenser Refrigerated Wine Cooler User Guide
Raypak Network Card Y 200 User Guide
RayTek Thermometer MX Series User Guide
RCA Microwave Oven RMW982 User Guide
RCA Stereo System fm radio tuner User Guide
ResMed Humidifier 1 User Guide
Rosewill Network Card RNG 406U User Guide
Samsung DVD Player DVD C621 User Guide
Sangean Electronics Portable Radio DT 300 User Guide