RCA TV Mount MAF15BKR User Guide

MAF15BKR  
Fits TVs 15”- 32”  
flat panel solutions  
LCD TV Wall Mount  
Maximum Load  
Installation Manual  
Capacity – 55 lb (25 kg)  
CAUTION:  
Thank you for choosing the RCA MAF15BKR Universal Flat Panel  
TV Wall Mount. This mount can be used for all major brands of  
15" - 32" flat panel TVs, 55 lbs (25 kg) or under. Before attempting  
to mount your television set, please remove all parts from this  
package and read the installation instructions carefully.  
This wall mount is intended for  
use only with the maximum  
weight of 25 kg/55 bls. Use with  
heavier than the maximum weights  
indicated may result in instability  
causing possible injury. Follow  
the installation and operation  
instructions carefully.  
WARNING: Use of this mount with a TV weighing over 55  
lbs. or with a screen larger than 32" could cause the mount  
to fail causing property damage and/or personal injury.  
Safety precautions  
Follow these precautions to ensure safe installation and mounting of your flat panel TV.  
1. Read these instructions carefully before you begin.  
If you are unsure of any part of the process, contact  
a professional contractor or installer for assistance.  
Improper installation can result in injury or damage.  
5. For drywall installation, it is essential for the  
wall mount plate to be attached to wall studs.  
(Use a stud finder.)  
6. Use the included hardware for mounting purposes.  
This hardware has been provided to ensure a safe  
and secure mount.  
2. The wall or mounting surface must be capable of  
supporting the combined weight of the mount and  
the display; if not, the structure must be reinforced.  
7. Hire a licensed electrician to relocate an electrical  
3. Safety gear and proper tools must be used. Failure  
to do so can result in injury and/or damage. A  
minimum of two people are required for installation.  
Do not attempt to install this mount alone under any  
circumstances.  
outlet, if needed.  
8. Be sure to purchase wires long enough to connect  
the TV to the audio and video components in your  
installation.  
Keep your sales receipt to obtain warranty parts and  
service and for proof of purchase. Attach it here and  
record the model number. This number is located on  
the product.  
4. Follow all instructions and recommendations  
regarding adequate ventilation and suitable  
locations for mounting your display. Consult the  
owner‘s manual for your particular display for more  
information.  
Model No. _____________________________________  
Purchase Date: _________________________________  
Dealer/Address/Phone __________________________  
Preparing to install  
Before beginning the installation process, verify that you have all the necessary tools on hand. The following  
tools are required for proper installation:  
Tools  
Package Contents  
Wall Plate (x1)  
Pour des instructions  
en français, se  
Phillips Head Screwdriver  
reporter à la page 4.  
Ratchet or Driver with 13 mm (1/2”) Socket  
Electric or Portable Drill  
Mount Arm (x2)  
Safety Bar (x1)  
Para obtener  
instrucciones en  
español, consulte la  
página 7.  
3/16” (4.8 mm) Drill Bit and Stud Finder for Drywall  
Installation  
Instruction Manual (x1)  
Hardware Kit (x1)  
3/8” (10 mm) Masonry Bit for Concrete Installation  
Continues on next page...  
 
Attaching the Arms to the TV  
IMPORTANT! Use extra  
care during this part of the  
installation. If possible, avoid  
placing your display facedown  
as it may damage the viewing  
surface.  
2. Determine the correct diameter of screw to use by  
carefully trying one of each size (M4 and M6) from  
the hardware kit. Do not force any of the screws  
– if you feel resistance stop immediately and try a  
smaller diameter screw.  
3. Attach the mount arms to the back of your display  
using the M6 washers (I) and the screws identified  
in Steps 1 and 2 (see Fig.3)  
NOTE: This mount comes  
with a selection of different  
screw diameters and lengths  
to accommodate a wide  
variety of display models. Not  
all of the hardware in the kit  
If you are using the longer screws on a display with  
a curved or recessed back, you will also need to use  
the spacers (E). You should only use a spacer if  
necessary.  
Fig.2  
will be used.  
Make sure the screws are snug, but do not  
overtighten.  
1. Determine the correct length of screw to use by  
examining the back of your display:  
For displays with  
flat backs.  
For displays with curved or  
recessed backs.  
A. If the back of your display is flat and the  
mounting holes are flush with the surface, you  
will use the shorter screws (A or C) from the  
hardware kit.  
B. If the back of your display is curved, has  
a protrusion, or if the mounting holes are  
recessed, you will need to use the longer screws  
(B or D) and spacers (E).  
Fig.3  
Final Installation  
1. With the help of another person, carefully lift your  
display and place it on the wall plate. Do not  
release the display until the mount arms have  
securely hooked onto the wall plate.  
2. Insert the safety bar  
at the bottom of the  
mount to prevent the  
display from being  
lifted from the wall  
Fig.4  
plate. A padlock can  
be inserted into the  
end of the bar to help  
prevent theft of your  
display (see Fig.5).  
Fig.5  
IMPORTANT! The safety bar must be used at all  
times to prevent the display from being accidentally  
knocked from the mount.  
Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to ensure  
that no connections have become loose over time. Re-tighten as necessary.  
Specifications  
Universal VESA Mounting Pattern: 230 mm x 250 mm  
(9” x 9.8“) max  
Display Size:  
15” to 32”  
Maximum Load:  
25 kg (55 lbs)  
Profile:  
2.2 cm (0.9”)  
3
 
© 2010 Audiovox Accessories Corporation  
Trademark(s) Registered, Marques Déposées, Marcas Registradas.  
All other brands and product names are trademarks or registered trademarks of their respective owners. /  
Toutes les autres marques et tous les autres noms de produits sont des marques de commerce ou des marques  
de commerce déposées de leurs propriétaires respectifs. / Todas las demás marcas y nombres de productos  
son marcas comerciales o marcas comerciales registradas de sus respectivos dueños.  
MAF15BKR_US_IB_02  
 

PYLE Audio Speaker PLMRW65 User Guide
Radio Shack Electronic Keyboard 42 4058 User Guide
Ricoh All in One Printer MV310E User Guide
Rimage Printer CDPR11 User Guide
Rio Audio CD Player Rio 800 User Guide
Rosewill Car Video System R500N User Guide
Rotel Universal Remote RR 920 User Guide
Russound Speaker R10DT User Guide
Samsung Washer S1003J User Guide
Sceptre Technologies Flat Panel Television E325 User Guide