RS2120i EN 27/3/07 11:04 AM Page 3
user manual
guide de l’utilisateur
manual de usuario
RS2120i
Sleep
CD
iPod not included.
iPod non inclus.
iPod no incluido.
It is important to read this instruction book prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
Es importante leer este manual antes de usar por vez primera su euipo.
RS2120i EN 27/3/07 11:04 AM Page 5
Important Safety Instructions
Please read and save for
future reference
• Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Some of the following information may not
apply to your particular product; however, as
with any electronic product, precautions
should be observed during handling
and use.
• Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
EN
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the
Additional safety information
• Apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on the apparatus.
• Always leave sufficient space around the
product for ventilation. Do not place
product in or on a bed, rug, in a bookcase
or cabinet that may prevent air flow
through vent openings.
• Do not place lighted candles, cigarettes,
cigars, etc. on the product.
• Connect power cord only to AC power
source as marked on the product.
• Care should be taken so that objects do
not fall into the product.
manufacturer’s instructions.
• Do not install near any heat sources such
as radiators,heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or the
third prong is provided for your safety. If
the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified
by the manufacturer.
• Do not attempt to disassemble the
cabinet. This product does not contain
customer serviceable components.
If your product operates on batteries,
adhere to the following precautions:
A.Any battery may leak electrolyte if mixed
with a different battery type, if inserted
incorrectly, or if all batteries are not
replaced at the same time.
B. Any battery may leak electrolyte or
explode if disposed of in fire or an
attempt is made to charge a battery not
intended to be recharged.
C. Discard leaky batteries immediately.
Leaking batteries can cause skin burns or
other personal injury. When discarding
batteries, be sure to dispose of them in
the proper manner, according to your
state/provincial and local regulations.
• Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
]
Portable Cart Warning
RS2120i EN 27/3/07 11:04 AM Page 6
Important Information
Technical Specification
Product: Audio System
Brand: RCA
lens, it is completely safe when operated
according to directions.
• Discs rotate at high speed inside
the player.
• Do not use damaged, warped, or
cracked discs.
Model: RS2120i
EN
Electrical Consumption:
Power Supply: 120V~60Hz
• Do not touch the pick-up lens which is
located inside the disc tray. To keep dust
from collecting on the pick-up lens, do not
leave the tray door open for an
extended period of time. If the lens
becomes dirty, clean it with a soft brush,
or use an air blower brush designed for
camera lenses.
• The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Power consumption: 110 Watts
Importer
Comercializadora Thomson de México,
S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
• Minimum distances around the apparatus
for sufficient ventilation.
• The ventilation should not be impeded by
covering the ventilation opening with
items, such as newspaper,
table-cloths, curtains, etc.
• No naked flame sources, such as lighted
candles, should be placed on
Service Information
This product should be serviced only by
those specially trained in appropriate
servicing techniques. For instructions on how
to obtain service, refer to the warranty
included in this Guide.
the apparatus.
• Attention should be drawn to the
environmental aspects of battery disposal.
Safety Precautions
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.
Important Battery
Information
• Never operate this product with the
cabinet removed.
• Do not use your Unit immediately after
transporting it from a cold place to a
warm place, as condensation may cause
the unit to malfunction.
• Remove the batteries to avoid leakage if
you do not use your remote control for
more than one month.
• Discard leaky batteries immediately as
leaking batteries may cause skin burns or
other personal injuries. Dispose of
batteries in the proper manner, according
to provincial and local regulations.
• Keep your unit away from humid areas
and abnormally hot places.
• Do not touch the player with wet hands. If • Any battery may leak electrolyte under
any liquid enters the player cabinet, take
the player to a trained technician
for inspection.
the following circumstances:
- if mixed with a different battery type,
- if inserted incorrectly,
• This compact disc player uses a laser to
read the music on the disc. The laser
mechanism corresponds to the cartridge
and stylus of a record player. Although
this product incorporates a laser pick-up
- if all batteries are not replaced at the
same time,
- if disposed of in fire, or
- if an attempt is made to charge a battery
not intended to be recharged.
RS2120i EN 27/3/07 11:04 AM Page 7
Please Respect the
Environment!
Headphone Safety
Make sure you turn down
the volume on the unit
before you put on
headphones. Increase the
volume to the desired level
only after headphones are
in place.
Please help protect the environment by
recycling or disposing of batteries according
to federal, state, and local regulations.
EN
Don’t Infringe
This product should only be used for the
purposes for which it is sold, that is,
entertainment, violating no copyright law.
Any attempts to use this product for which it
is not intended is unlawful and therefore
not condoned by Thomson.
Portions based upon Microsoft Windows Media Technologies.
Copyright © 1999 Microsoft Corporation. All Rights Reserved. Microsoft, Windows Media, and the
Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
The descriptions and characteristics given in this document are given as a general indication and not as a
guarantee. In order to provide the highest quality product possible, we reserve the right to make any
improvement or modification without prior notice. The English version serves as the final reference on all
products and operational details should any discrepancies arise in other languages.
RS2120i EN 27/3/07 11:04 AM Page 8
Contents
Getting Started . . . . . . . . . . . 2
Recording to the USB drive11
Content of Box
Connections
An Overview
Recording CD/iPod/Tuner/AUX to
USB drive
EN
Deleting Files from USB drive . . . . . . . . .12
Deleting All Files
General Controls . . . . . . . . . . 4
Main Unit
Remote Control . . . . . . . . . . . . . . . . . . . . .5
iPod Mode . . . . . . . . . . . . . . . . .13
Connecting iPod Dock
Playback Features
Display and Settings . . . . . . .7
Setting the Clock/Timer
Sleep Mode
Charging your iPod
Advanced Playback
Sound Features . . . . . . . . . . . .8
Controls . . . . . . . . . . . . . . . . . . . .14
Volume Control
Bass Boost and Equalizer
Intro/Repeat/Random
Setting Up a Program List
Rename Tracks . . . . . . . . . . . . . . . . . . . . .15
CD and mp3 Disc Playback8
Advanced Navigation
Controls . . . . . . . . . . . . . . . . . . . .15
File Navigation
USB Playback . . . . . . . . . . . . . .10
Connecting USB device to the Main Unit
Selecting USB Mode
USB Playback Features
Memory Usage
Main Unit
Remote Control . . . . . . . . . . . . . . . . . .16
Tips on Playback Sequence of Disc . . . . .17
Radio . . . . . . . . . . . . . . . . . . . . . . .10
Selecting Tuner Mode
Selecting Tuner Band
Troubleshooting Tips . . . . .18
Tune Mode and Preset Mode
Suppressing Stereo Signal . . . . . . . . . . . .11
Maintenance . . . . . . . . . . . . . .19
Cleaning
Handling CDs
CD Lens Care
Technical Specification
Limited Warranty . . . . . . . . .20
1
RS2120i EN 24/4/07 11:15 AM Page 9
Getting Started
Content of Box
Sleep
CD
EN
two main speakers
one remote control
User Manual
one main unit
Quick Start Guide
Product
Registration
Card
one iPod dock and
eight adapters
one AM loop antenna
Connections of Antennas and
Speakers
Using the FM and AM Antennas
Before you use your unit, ensure both the
FM and AM antennas are
1. AUX IN.
positioned properly.
2. AM loop antenna jack.
3. FM pigtail antenna.
4. Main speaker jacks.
5. iPod dock socket.
Uncoil the FM antenna at the back of the
unit, ensuring it is fully extended (you may
even want to tape it to the wall behind the
unit if possible. The higher the better.) You’ll
also need to connect the AM antenna loop
to the back of the unit if you listen to AM
stations. Rotate the AM loop antenna for
better reception.
1
2
3
Connecting the Speakers
Each speaker has a black and a red wire.
When connecting the speakers, match the
red wires to the red jacks and the black
wires to the black jacks.
4
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in
the terminal.
NOTE: Ensure the insulation is completely removed from the ends
of the speaker wires at all connection
points.
5
2
RS2120i EN 27/3/07 11:04 AM Page 10
Getting Started
Installation
Connecting iPod Dock
To ensure sufficient ventilation, keep the
space shown below free from other surfaces:
1. Check the table and use the appropriate
adapter for your iPod.
EN
Front View
4 inches
Sleep
CD
4 inches
4 inches
Side View
4 inches
2 inches
2. Install the correct adapter to the dock.
3. Connect the cable from the iPod dock to
the iPod dock socket at the back of
the unit. Ensure the arrow on the cable
aligns with the arrow on the back panel.
iPod Compatibility
Made for:
• iPod with video (30GB, 60GB, 80GB)
5th/5.5th generations
• iPod photo (20GB U2 Special Edition, 30GB
U2 Special Edition, 40GB, 60GB)
4th generation
• iPod (10GB, 15GB, 20GB, 20GB U2 Special
Edition, 30GB, 40GB)
3rd & 4th generations
• iPod nano (1GB, 2GB, 4GB, 8GB)
1st & 2nd generations
• iPod mini (4GB, 6GB)
1st & 2nd generations
Note: This model includes
adapters for most of the common
iPod models. If you have an iPod that
requires a different adapter, use the
adapter shipped with your iPod.
3
RS2120i EN 27/3/07 11:04 AM Page 11
General Controls
Main Unit - Front View
FAST REVERSE/FORWARD
/
• In CD, USB or iPod mode, press to go to
the previous/next track; hold to fast
forward or reverse through track.
• In Tuner mode, it tunes the radio.
Sleep
CD
EN
- Opens or closes the disc tray.
USB
• Connects the USB drive.
File Navigation Buttons
Use the following file Navigation buttons to
navigate through the menu.
SELECT
• From the stop mode, it enters
Navigation mode.
• In the Navigation mode, it moves forward
and selects highlighted item.
• In Rename mode, it confirms the
editing alphabet.
ON/STANDBY
• Turns power on or off (STANDBY mode).
DEMO/DIMMER
• Turns the demonstration on/off.
• Adjusts the brightness of the display.
BACK
• In the Navigation mode, it
navigates backwards.
• In Rename mode, it edits
previous alphabet.
SOURCE
• Allows selection of the following modes:
CD player, Tuner, iPod, USB and AUX.
DELETE
BAND/INFO
• When reviewing program, it removes
track from Program List.
• In the USB mode, it removes file from the
connected USB drive.
• In Rename mode, it deletes
current alphabet.
• In CD or USB mode, it displays various
information. e.g. Track time, remaining
time, ID3 tag, memory usage etc.
• In Recording mode, it selects display
options and remaining time.
• In Tuner mode, it selects radio band.
VOLUME CONTROL
RECORD
• In the Navigation mode, it moves up/down
a list.
• In Normal Mode, it adjusts the volume.
• In Rename mode, it selects alphabets.
• Starts and stops recording to the
USB drive.
PLAY/PAUSE
• In the CD, USB or iPod mode, it starts and
pauses playback.
TUNE/PRESET
• In the CD or USB mode, it stops playback.
• In Recording mode, it stops recording to
USB drive.
• In Tuner mode, it selects tune or
preset mode.
4
RS2120i EN 27/3/07 11:05 AM Page 12
General Controls
Remote Control
ON/STANDBY
• Turns the power on or off
(STANDBY mode).
EN
SOURCE
• Selects the CD player, Tuner, iPod, USB
and AUX.
BAND
• In Tuner mode, it selects radio band.
FM ST
• Selects between stereo and mono sound in
the FM tuner mode.
INFO
• In the CD or USB mode, it displays various
information (e.g. Track time, remaining
time, ID3 tag, memory usage, etc.)
DEMO/DIMMER
• Turns the demonstration on/off.
• Adjusts the brightness of the display.
B. BOOST
• Turns on or off the Bass Boost.
EQ
• Selects the equalizer presets.
MUTE
• Mutes the sound.
VOLUME CONTROL
or
• Adjusts the volume of the sound.
PLAY/PAUSE
• In CD, iPod or USB mode, it starts and
pauses playback.
FAST REVERSE/FORWARD
/
• In the CD, USB or iPod mode, press to go
to the previous/next track; hold to fast
forward or reverse through track.
• In Tuner mode, it tunes down/
up frequency.
RECORD
• Starts and stops recording to the USB drive.
5
RS2120i EN 27/3/07 11:05 AM Page 13
TUNE/PRESET
File Navigation Buttons
Use the navigation buttons to navigate
through menu.
• In CD or USB mode, it stops playback.
• In Recording mode, it stops recording.
• In Tuner mode, it selects the Tune or
Preset mode.
EN
• Opens or closes the disc tray.
PROG
• In CD or USB mode, it enters
program mode.
• In Tuner mode, it stores stations
• In Navigation mode, it enters rename
mode and store new file names
• From stop mode, it enters
Navigation mode.
• In Navigation mode, it navigates forward
and selects highlighted item.
• In rename mode, it confirms the current
alphabet and move to the next alphabet.
INTRO
• In CD or USB mode, it turns intro mode on
or off to play the first 10 seconds of each
track/file.
CLOCK
MENU
• Displays clock time. Press and hold to
enter clock setting mode.
• In Navigation mode, it navigate
backwards.
• In rename mode, it edits the
previous alphabet.
RANDOM
• In CD, USB or iPod mode, it turns on/off
random playback.
/
• In Navigation mode, it moves up/down
a list.
• In USB or simple MP3/WMA mode, it
enters Navigation mode.
• In rename mode, it selects alphabets.
TIMER
• Hold to enter timer setting mode.
• Press to activate and deactivates timer.
REPEAT
• In the CD mode, it repeats one track or
repeat all tracks mode.
• In USB or iPod mode, it selects repeat one
file, repeat all files mode.
Installing Batteries
Insert 2 "AAA"("UM-4"/"R03") batteries to
the remote control prior to use.
SLEEP
• Selects the time interval in minutes before
the unit turns off.
ADD
• In the CD or USB mode, it adds track/file
to the Program List.
DEL
• When reviewing program, it removes
track from Program List.
• In the USB mode, it removes file from the
connected USB drive.
• In rename mode, it deletes
current alphabet.
6
RS2120i EN 27/3/07 11:05 AM Page 14
Display and Settings
Play Mode status
EQ status
EN
Folder/audio file indication
Source indication
Setting the Clock
1. Press and hold CLOCK on the remote
control until the hour flashes on
the display.
7. Press TIMER to save settings. Press
TUNE/PRESET to cancel setting.
The timer is automatically activated once
timer setting is saved.
2. Press
press CLOCK to shift to minute digits.
3. Press or to set the minute.
4. Press CLOCK to save settings. Or press
TUNE/PRESET to cancel the setting.
or
to set the hour and then
Activating the Timer
Press TIMER to turn on/off the alarm. The
timer icon
activated.
is displayed when timer is
Timer and Program Recording
You can turn on/off the unit or record
Sleep Mode
You can select the time interval in minutes
before the unit turns off automatically.
TUNER at preset times by setting the timer.
You can use Program Recording to preset
the unit to record your favorite radio
program. When setting the timer, choose
REC TUNER as the source to record radio at
the preset time. Ensure there is adequate
memory in the USB device connected.
Press SLEEP to select among OFF, 120, 90,
60, 45, 30, 15 and 5 minutes.
The Sleep icon lights on the display when
sleep mode is activated.
View and Adjust Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time. Press again to
change the time.
Setting the Timer
1. Press and hold TIMER on the remote
control until Timer On and the clock hour
flashes on the display.
Note: Sleep is automatically
2. Set the Timer On setting. Press
or
de-activated when the unit is turned off.
to set the hour and then press TIMER to
shift to minute digits.
3. Press
or
to set the minute.
4. Press TIMER to change to Timer Off
setting with clock time flashing. Repeat
steps 2 & 3 for timer off time setting.
Showing Demonstration
Press DEMO/DIMMER to turn on/off
demonstration mode.
5. Press TIMER to select source. Press
to select DISC/USB/iPod/REC TUNER/
TUNER. If REC TUNER is selected, press
or
Adjusting Brightness
or
to select the preset station after
Press and hold DEMO/DIMMER until
"DIMMER X" displays where "X" represents
the brightness level. Press DEMO/DIMMER
to adjust the brigtness level and press any
buttons to save setting and exit.
pressing TIMER.
6. Press TIMER to set volume. Adjust
VOLUME CONTROL to select desired
volume level.
7
RS2120i EN 27/3/07 11:05 AM Page 15
Sound Features
Volume Control
Using Preset Equalizer Curves
Turn the volume control on the main unit or
Press EQ to toggle among FLAT, JAZZ,
CLASSIC, ROCK and CUSTOM. The display
shows your selection briefly and the relative
icon lights on the display.
press VOL
or
on the remote control to
adjust volume level. The volume level shows
briefly on the display.
EN
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press
to cycle among displayed bass and
treble range levels.
Bass Boost
Press B.BOOST to turn on/off boosting the
bass frequency. The B.Boost icon displays
when it is activated.
or
3. While BAS and TRE is displayed, adjust
volume control to set the associated gain
between -10 - +10.
Muting Sound
4. Press EQ to save setting and exit.
Press
on the remote to mute the sound.
When MUTE is on, the symbol flashes.
CD and mp3 Disc Playback
Loading Discs
1. Press
disc tray.
2. Insert a disc with label face up.
3. Press again to close the disc tray..
Fast Forwarding/Reversing/
Skipping Tracks
on the main unit to open the
• Press and hold
or
to fast forward
or reverse through a CD while it
is playing.
• Press
or
to skip to the previous or
next track.
Play/Pause Discs
Press
Press
in stop mode to begin playback.
during playback to pause disc.
Program Playback
Refer to page 14 for details.
Press again to resume.
Stop Playback
During playback, press TUNE/PRESET to
stop playback. The unit returns to
Navigation mode for 10 seconds before
entering stop mode.
8
RS2120i EN 27/3/07 11:05 AM Page 16
CD and mp3 Disc Playback
Notes on mp3/WMA Disc
Notes:
• Use .mp3 as the extension when
converting audio files into mp3 for saving
onto CD-R(W) or CD-ROM,
e.g. Abc08.mp3. Do not use any other
extension e.g. .doc, .pdf.
• Do not use the .mp3 extension for other
text or non-audio data files as this may
result in serious malfunction and harmful
noise interference.
• For better quality mp3/WMA disc
playback, the CD quality should be
recorded at 128kbps or
• See pages 15 – 16 for details on
Navigation Mode.
• In CD stop mode, press SELECT/
enter Navigation mode and show disc
menu. In CD Navigation mode, press
/BACK to return to stop mode.
• Be sure to remove all discs from the
disc tray before moving or transporting
the unit.
• Do not force the tray to close during
tray opening.
• File formats/bitrates supported by
the player:
mp3: 32 to 320kbps
wma: 48 to 160kbps
to
EN
64kbps respectively.
• Disc data size > 650MB is
not recommended.
• Total files and folders in the disc should
not exceed 250, it also depends on the
length of the file/folder names.
• For mixed mode discs, only one mode will
be selected for playback depending on
the recording format.
• To ensure good performance, wait until
the disc changer completely reads the disc
before proceeding.
Important CD and
mp3/WMA Information
Notes on CD-R/RW Disc
• Some CD-R and CD-RW discs may not be
playable due to the state of the disc or
the device that was used for recording.
• Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
• mp3 files in CD ROM EXTRA format disc
are not recognized.
• To avoid damages to the CD-R/RW disc, do
not open the disc tray door while the disc
is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
9
RS2120i EN 27/3/07 11:05 AM Page 17
USB Playback
Connecting USB drive to the
Main Unit
Stop Playback
Press TUNE/PRESET to stop playback. The
unit enters the Navigation mode for 10
seconds before entering the stop mode.
Lift the cover on the front panel. Connect
the USB drive to the main unit’s USB Jack on
the front panel.
EN
Skipping Files/Fast Forwarding/Reversing
• Press
next file.
• Press and hold
or
to skip to the previous or
or to fast forward
or reverse through a file while it
is playing.
Selecting USB Mode
Press SOURCE repeatedly to select
USB mode.
Memory Usage
Press BAND/INFO on the main unit or INFO
on the remote control to view memory
usage on the USB drive.
USB Playback Features
Start and Pause Playback
Press
to start and pause playback.
Note: Mass Storage Class (MSC)
USB devices of up to 20 GB are
compatible with this unit. Do not connect
other USB devices to this unit.
Radio
• Press
• Press and hold
scan frequencies.
or
to select frequencies.
or to
Selecting Tuner Mode
Press SOURCE to enter Tuner mode.
Preset Mode
In PRESET mode, the unit can store up to 32
radio stations in its memory. You can
program the presets in two ways:
Selecting Tuner Band
In Tuner mode, press BAND to select
between FM or AM Radio band.
• Manually setting the by entering every
single radio station yourself.
• Perform Auto Preset Programming and
the unit can store all available radio
stations automatically in ascending order.
Tune Mode and Preset Mode
The tuner can be in either TUNE or
PRESET mode.
• To select between TUNE and PRESET
mode, press TUNE/PRESET
.
Manually Setting Presets
1. Press TUNE/PRESET to enter
• In PRESET mode, "P: XX" will be displayed
where "XX" represents the preset
number (1-32).
TUNE mode.
2. Press
or
to adjust the
desired frequency.
Tune Mode
In TUNE mode, you can press
3. Press PROG once and the most recently
accessed program location flashes on
the display.
or
to
select desired frequencies.
10
RS2120i EN 27/3/07 11:05 AM Page 18
Radio
4. If a different program location is
Using Presets
preferred, press
or
to move to the
• When in PRESET mode, press
to access the previous or next
preset station.
or
desired preset number (1-32).
5. Press PROG to store the selected
frequency at that preset.
EN
Suppressing Stereo Signal
Press FM ST on the remote control to select
between FM mono and stereo mode.
STEREO is displayed in stereo mode.
Auto Preset Programming (FM only)
Press and hold the BAND button for 2
seconds to scan stations in the FM band. The
stations will then be stored as preset
channels. A maximum of 32 stations can be
stored. Be careful of your preset channels
being erased accidentally because the
scanning and storing process is automatic
upon pressing the button. You can stop the
automatic scan by pressing any button, but
the erased stations cannot be recovered.
Tip: Under PRESET mode, press
or
can only access the
preset stations. Manual tuning is not
available in this mode.
Recording to the USB drive
An Overview
• You can record CD, Tuner, iPod, USB or
AUX files to the MSC device which
connected to the USB Jack.
Note: When recording from an
mp3 CD, recording always begin
at the beginning of the song even when
started from a mid-song location.
• Recording function always records what is
being played. Press SOURCE to select the
source you want to record from.
• In general, recording starts instantly when
RECORD is pressed. It stops when
Record only selected tracks from a CD
1. Create a CD program by following the
instructions under “Setting Up a Program
List” on page 14.
2. In CD stop mode, press PROG and then
RECORD. Playback and recording start
automatically. The Program icon lights
and REC icon lights on the display.
3. Recording stops automatically when the
program is finished.
TUNE/PRESET or RECORD is pressed.
• During recording, REC icon lights.
Recording CD to USB drive
1. Connect the USB drive to the unit's
USB jack.
2. In CD stop mode, press RECORD. Playback
and recording start automatically and the
REC icon lights.
3. Press TUNE/PRESET or RECORD to stop
recording.
Recording iPod/Tuner/AUX
to USB drive
1. Press SOURCE to select the source you
want to record from. If you selects Tuner
mode, select the station to record (refer to
page 10 – 11 for details).
Recording any passage from a CD
(except for mp3 CD)
1. Play the CD.
2. Press RECORD when you want to start
recording.
2. Press RECORD to start recording.
3. Press TUNE/PRESET or RECORD to
stop recording.
3. Press TUNE/PRESET or RECORD when
you want to stop recording. You can start
whenever you want.
Program Recording
Refer to ”Setting the Timer” on page 7.
11
RS2120i EN 27/3/07 11:05 AM Page 19
Deleting Files from USB drive
Tips:
• If CD playback is already started,
recording will begin instantly when
RECORD is pressed (except for mp3
CD). If CD playback is stopped, playback
and recording will start simultaneously
when RECORD is pressed.
1. In USB Navigation mode, select the file for
deletion using the navigation buttons
(Refer to “Advanced Navigation Controls”
on page 15 – 16 for details.)
2. Press DELETE on the main unit or DEL on
the remote control.
EN
• Recording stops automatically when
CD stops.
3. Turn VOLUME CONTROL knob on the
main unit or press
or
on the remote
• To view recording time and remaining
time, press BAND/INFO on the main
unit or INFO on the remote
during recording.
control to select Yes to delete or No
to cancel.
4. Press SELECT on the main unit or press
on the remote control to
confirm selection.
Elapsed
recording
time
0:22
13HOURS
Remaining
Time
If Yes is selected, the display shows
memory usage information after deleting
selected file. For a few seconds, the unit
will return to the Navigation mode.
• The encoding bitrate for tuner, CD and
AUX signal are:
CD/Aux: 128 kbps
Tuner: 96 kbps
Deleting All Files
1. In Navigation and mp3 stop modes, press
and hold DELETE on the main unit, or
press DEL on the remote control.
2. Turn VOLUME CONTROL knob on the
main unit or press
or
on the remote
control to select Yes to delete or No
to cancel. All files on the USB drive will be
deleted once you select Yes.
3. Press SELECT on the main unit or press
on the remote control to
confirm selection.
12
RS2120i EN 28/3/07 10:09 AM Page 20
iPod Mode
In iPod mode, you can navigate and
playback music on your iPod.
Shuffle and Repeat Modes
You control the shuffle and repeat modes by
pressing and REPEAT on the
remote control.
Connecting your iPod to the Unit
EN
• Ensure the iPod dock is connected to the
unit as described on page 3.
Charging your iPod
Your iPod is charged whenever it is docked
to the main unit.
• Turn off your iPod or put it in
Pause Mode.
• Place the iPod on the iPod dock and press
SOURCE to select iPod mode.
• "iPod Connecting" displays on the main
unit. "No iPod" will be displayed if no
iPod is connected to the unit. "iPod
mode" will be displayed if the connection
is successful and iPod will start playback.
• Once connected, the iPod will resume
playback from where it last stopped.
Disconnecting your iPod
Stop the iPod playback before disconnecting
it from the dock.
Notes:
• This model includes adapters
for most of the common iPod models.
If you have an iPod that requires a
different adapter, use the adapter
shipped with your iPod.
• Do not connect your iPod to the main
unit's USB jack. It is recommended to
connect your iPod to the iPod
dock provided.
Navigate and Playback Audio
Files on your iPod
Once docked, navigate and playback your
iPod using the unit’s buttons and
remote control.
The iPod’s buttons are copied to the unit
allowing you to experience the same control
as the iPod’s own control.
• The volume setting of the iPod could
not be controlled by the main unit or
the remote control.
Remote
Main Unit
iPod Control
/
/
/
/MENU button
N/A
N/A
N/A
Menu button
Center button
Click Wheel
or
13
RS2120i EN 27/3/07 11:05 AM Page 21
Advanced Playback Controls
In CD and USB mode, advanced playback
controls allow you to sample, repeat and
random playback files and set up a Program
List. In USB mode, it allows you to
rename tracks.
Display Program List
1. While the CD playback is stopped, press
PROG to enter PROGRAM mode. To
display program list, press
EN
TUNE/PRESET
2. Press or
.
repeatedly to view
each track assignment in the program list.
Sampling Tracks
Press INTRO on the remote control to play
the first 10 seconds of each track on the
current disc or turn intro mode off. Intro is
displayed when sampling is activated.
Deleting from Program List
1. While in PROGRAM mode, press
to select the program to delete.
or
2. Press DELETE on the unit or DEL on the
remote control.
3. Press
cancel and "Yes" to confirm.
4. Press to confirm selection.
or
to select between "No" to
Repeat
Press REPEAT on the remote control to
select repeat options:
Repeat the current track (REPEAT 1) or
Repeat all tracks in USB mode
(REPEAT ALL).
Notes:
• You can create a program of up
to 32 tracks.
• In Program stop mode, press STOP
twice to turn off Program mode.
Random Playback
Press
on the remote control to turn
on/off random playback.
when it is activated.
is displayed
Deleting the Entire Program List
Follow the above steps by pressing and
holding DELETE on the unit or DEL on the
remote control instead of pressing
and releasing.
Setting Up a Program List
1. In CD navigation mode, use the
navigation buttons to select the track to
add to Program List.
2. Press ADD on the remote control to add
selected track into the next available
program location.
3. Repeat steps 1 to 3 to store more tracks
into program memory.
4. Wait for a few seconds timeout to return
to Navigation mode.
Playing a Program List
In CD stop mode, press PROG to enter
program mode and then press
. Program
playback will begin. Program is displayed.
14
RS2120i EN 27/3/07 1:17 PM Page 22
Advanced Playback Controls
Renaming Tracks
You can rename files in the USB drive.
1. In the USB stop mode, press
select folder.
Notes:
• You can only rename the files
but not the folders.
• You need to enter a folder and select a
file you want to rename before
pressing PROG.
or
to
EN
2. Press
current folder.
3. Press PROG to enter rename mode.
4. Press or on the remote control or
or
to select the file in the
VOLUME CONTROL on the main unit to
select the first letter of the new file name.
5. Press
move to the next letter.
6. Press to modify the previous letter.
to confirm the current letter and
7. Press PROG again to confirm and store
the new file name after entering the last
letter of the file name (maximum
seven letters).
Advanced Navigation Controls
File Navigation
Main Unit
SELECT
• From stop mode, enters Navigation mode.
• In Navigation mode, plays selected track
or enters selected folder.
BACK
• In Navigation mode, exits current folder
and return to a higher level.
DELETE
• Deletes the selected item.
VOLUME CONTROL
• Adjusts volume.
• In Navigation mode, selects items on a list.
15
RS2120i EN 27/3/07 11:05 AM Page 23
Remote Control
• From stop mode, enters Navigation mode.
• In Navigation mode, plays selected track
or enter selected folder.
EN
/MENU
• In Navigation mode, exits current folder
and return to a higher level.
/
• In Navigation mode, moves up/down a list.
• In tuner mode, selects the previous or the
next preset number.
ADD
• In CD, USB or MP3/WMA mode, adds
track/file to the Program List.
DEL
• When reviewing program, it removes track
from Program List.
• In USB mode, it removes file from the
connected USB drive.
16
RS2120i EN 27/3/07 11:05 AM Page 24
Advanced Navigation Controls
Tips on Playback Sequence of Disc
• Check that the mp3/WMA disc is created with a single folder structure. Refer to
the diagram below for playback sequence details on multi-level folder structure.
• For example, the folders and songs from level 2 are played before moving to play
EN
folders and songs from level 3.
• Folder playback sequence is indicated by the letters A to G.
• Song playback sequence is indicated by the numbers (1 to 15) in front of the
song name.
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
A
D
8
9
Folder 1.1
Song 1.1.1
Song 1.1.2
Folder 1
10 Song 1.1.3
E
F
G
13
Song 1.2.1.1
Folder 1.2.1
Folder 1.2
Folder 2.1
14 Song 1.2.1.2
Song 1.2.1.3
15
B
11
Song 2.1.1
Song 2.1.2
Folder 2
12
3
4
5
Song 2.2
Song 2.3
Song 2.4
C
6
7
Song 3.1
Song 3.2
Folder 3
1
2
Song 4
Song 5
17
RS2120i EN 27/3/07 11:05 AM Page 25
Troubleshooting Tips
Unit will not turn on
CD sound skips
• Check the power cord for a
secure connection.
• Unplug the unit for a moment, and then
plug into power source again.
• Check the outlet by plugging in
another device.
• Clean the disc.
• Check the disc for warping, scratches, or
other damage.
• Check if something is causing the unit to
vibrate. If so, move the unit.
• Make sure the speakers are at least 3 feet
away or on a different surface from the
main unit.
EN
No sound
• Increase the volume setting.
• Check the connection to speakers.
• Check that you have selected the
appropriate function: CD, Tuner.
• Make sure the mute is off.
• Make sure the headphones are not
plugged in.
CD button will not respond
• Switch to another function (Tuner) and
then back to CD.
Remote control does not work
• Check that the batteries are
properly installed.
• Replace any weak batteries.
• Check the unit is plugged into
power source.
Poor radio reception
• Check the antenna connection.
• Move antenna.
• Turn off nearby electrical appliances, such
as hair dryer, vacuum cleaner, microwave
and fluorescent lights.
• Point the remote directly at the unit’s
front panel.
• Move closer to the unit.
• Remove any obstacles between the
remote and the unit.
CD does not play
• Check that the CD is in the tray.
• Check that the CD label is facing up.
• Check that PAUSE mode is not on.
• Check that the CD function is selected.
• Use the CD lens cleaner.
• Clean the disc.
• Try another CD.
18
RS2120i EN 27/3/07 11:05 AM Page 26
Maintenance
Disconnect the unit from the power
source before performing any maintenance.
CD Lens Care
When your CD lens gets dirty it can cause
the unit to output poor sound quality. To
clean the lens you will need to purchase a
CD lens cleaner to maintain the output
sound quality of your unit. For instructions
on cleaning the CD lens, refer to the ones
accompanying the lens cleaner.
Cleaning
Clean the exterior of the unit using a soft
dust cloth.
EN
CD Player
CAUTION! This unit operates with a laser. It
must be opened by only a
Technical Specification
Power supply: 120V~60Hz
Dimensions ( H x W x D mm):
Unit size: 214 x 152 x 229
Speaker: 243 x 150 x 195
CD player: Response curve (+/- 2dB):
60Hz to 5kHz
qualified technician.
Handling CDs
• Do not touch the signal surfaces. Hold the
CD by the edges, or by one edge and
the hole.
• Do not affix labels or adhesive tapes to
the label surfaces.
• Do not scratch or damage the label.
• Do not use damaged (cracked or
warped) CDs.
Rating Plate: Look for it at the back of
the set.
Maximum size of Mass Storage Class device
supported: 20 GB
Cleaning CDs
• Dirty CDs can cause poor sound quality.
Always keep CDs clean by wiping them
gently with a soft cloth from the inner
edge toward the outer perimeter.
• If a CD becomes dirty, wipe the dirt away
gently with a soft damp cloth and then
remove any water droplets with a
dry cloth.
• Do not use record cleaning sprays or
antistatic agents on CDs. Also, never clean
CDs with benzene, thinner, or other
volatile solvents which may cause damage
to the disc surface.
19
RS2120i EN 27/3/07 11:05 AM Page 27
Limited Warranty (U.S.)
What your warranty covers:
• Defects in materials or workmanship.
EN
For how long after your purchase:
• One year from date of purchase.
• The warranty period for rental units begins with the first rental or 45 days from date of
shipment to the rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a refurbished unit. The exchange unit is under
warranty for the remainder of the original product’s warranty period.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that
the product is within the warranty period must be presented to obtain warranty service.
For rental firms, proof of first rental is also required.
How to make a warranty claim:
• Call 1-800-336-1900 and have your unit's date of purchase and model/serial number ready.
The model/serial number information is on the back of your unit.
• A representative will troubleshoot your problem over the phone.
• If the representative determines that you should receive a replacement unit, follow below
steps:
• Properly pack your unit. Include any cables, etc., which were originally provided with the
product. We recommend using the original carton and packing materials.
• Include evidence of purchase date such as the bill of sale. Also print your name and
address and a description of the defect. Send via standard UPS or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for loss or damage. Thomson accepts no liability in case of damage
or loss en route to Thomson.
• Pay any charges billed to you by the Exchange Center for service not covered by the
warranty.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating
Instructions and user controls. For additional information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
20
RS2120i EN 27/3/07 11:05 AM Page 28
Limited Warranty (U.S.)
Product Registration:
• Please complete and mail the Product registration Card packed with your unit. It will make
it easier to contact you should it ever be necessary. The return of the card is not required
for warranty coverage.
EN
Limitation of Warranty:
• The warranty stated above is the only warranty applicable to this product. All
other warranties, express or implied (including all implied warranties of
merchantability or fitness for a particular purpose) are hereby disclaimed. No
verbal or written information given by inc., its agents or employees shall create
a guaranty or in any way increase the scope of this warranty.
• Repair or replacement as provided under this warranty is the exclusive remedy
of the consumer. Thomson inc. Shall not be liable for incidental or consequential
damages resulting from the use of this product or arising out of any breach of
any express or implied warranty on this product. This disclaimer of warranties
and limited warranty are governed by the laws of the state of indiana. Except to
the extent prohibited by applicable law, any implied warranty of merchantability
or fitness for a particular purpose on this product is limited to the applicable
warranty period set forth above.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
21
RS2120i EN 27/3/07 11:05 AM Page 29
Limited Warranty (Canada)
Thomson multimedia Ltd. warrants to the purchaser or gift recipient that if any
manufacturing defect becomes apparent in this product within 1 year from the original date
of purchase, it will be replaced free of charge, including return transportation.
EN
This warranty does not include damage to the product resulting from accidents, misuse or
leaking batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with accessories in
the original carton (or equivalent).
— Mail prepaid (with proof of purchase) and insured to:
Thomson multimedia Ltd.
6200 Edwards Blvd.,
Mississauga, Ontario L5T 2V7
Canada
The provisions of this written warranty are in addition to and not a modification of or
subtraction from the statutory warranties and other rights and remedies contained in any
applicable legislation, and to the extent that any such provisions purport to disclaim, exclude
or limit any such statutory warranties and other rights and remedies, such provisions shall be
deemed to be amended to the extent necessary to comply therewith.
If you are unable to find a qualified servicer for out of warranty service, you may write to:
Thomson Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
22
RS2120i EN 24/4/07 12:03 PM Page 2
IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
EXPORTER
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206-1976
© 2007 Thomson Inc.
Trademark(s) ® Registered
Marca(s) ® Registrada(s)
Marque(s) ® Deposée(s)
Printed In China / Impreso en China
5643738A (EN/F/E)
|