RCA Clock Radio RCD20 User Guide

v2.0 (1.0.2.0) (EN/F/E)  
user manual  
guide de l’utilisateur  
manual de usuario  
Product registration  
RCD20  
Thank you for purchasing an RCA product. We pride ourselves on the  
quality and reliability of all our electronic products but if you ever  
need service or have a question, our customer service staff stands  
REGISTRATION: Registering On-line will allow us to contact you in  
the unlikely event a safety notification is required under the Federal  
Consumer Safety Act. Register Online at:  
WWW.RCAAUDIOVIDEO.COM. Click on Product Registration and  
Fill Out the Brief Questionnaire.  
Enregistrement du produit  
Merci d’avoir acheté un produit RCA. Nous sommes fiers de la qualité  
et de la fiabilité de tous nos produits électroniques, mais en cas de  
nécessité de réparation ou pour toute question, le personnel de  
notre service clientèle est prêt à vous aider. Contactez-nous sur  
www.rcaaudiovideo.com. ENREGISTREMENT D’ACHAT: Enregistrer votre produit en ligne nous permettra de communiquer  
avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer Safety Act (Loi fédérale de protection  
du consommateur). Enregistrez votre produit en ligne sur: WWW.RCAAUDIOVIDEO.COM. Cliquez sur Enregistrement  
produit et remplissez le court questionnaire.  
Enregisregistro del productotrement du produit  
Gracias por comprar un producto RCA. Nos enorgullece la calidad y fiabilidad de todos nuestros productos electrónicos, pero si  
alguna vez necesita servicios técnicos o si tiene alguna pregunta, nuestro personal de atención al cliente está a su disposición  
para ayudarle. Comuníquese con nosotros en www.rcaaudiovideo.com. REGISTRO DE COMPRA: El registro en línea nos  
permitirá comunicarnos con usted en el caso de tener que enviarle algún aviso de seguridad en virtud de la Ley Federal de  
Seguridad del Consumidor. Registre el producto en línea en: WWW.RCAAUDIOVIDEO.COM. Haga clic en Registro del  
producto y responda al cuestionario.  
EN/F/E  
It is important to read this user manual prior to using your new product for the first time.  
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.  
Es importante leer este manual antes de usar por vez primera su equipo.  
 
General controls  
Clock  
Before you begin  
Top view  
Setting clock manually  
Plugging in for power  
Power failure indicator  
1. Press and hold SET TIME to enter clock setting mode.  
2. While holding down SET TIME, press HR to set the  
hour.  
Connect the power cord to a convenient wall outlet.  
Once connected with power, the clock flashes. Refer to  
the Clock section for instructions on properly setting the  
Clock.  
If you have not installed the 9-volt alkaline battery in the  
product, or the battery runs out while power is interrupted,  
all the settings (clock and alarm) will be lost. After AC power  
is restored, the Digital Display will flash to indicate that  
power was interrupted and you should readjust the time  
settings.  
The clock is in 12 hour format. The PM indicator will  
appear for showing a PM time.  
2. While holding down SET TIME, press MIN to set the  
Battery back-up operation  
minute.  
This clock is equipped with a timekeeping system that  
can be powered with a 9-volt alkaline battery (not  
included). The power failure protection circuit will not  
operate unless battery is installed.  
3. Release SET TIME to confirm and exit clock setting  
Note: It is recommended to replace the battery at least once  
per year even if no power failures have occurred.  
mode.  
When normal household power is interrupted, the  
battery will power the clock to keep track of time and  
alarm settings programmed into memory.  
When the battery backup functions, the digital display  
will not light, however, the function of alarm still occurs  
during the power interruption if remaining battery  
power is adequate.  
Normal operation will resume after AC power is  
restored so you will not have to reset the time or the  
alarm.  
Alarm  
Alkaline (NEDA 1604A/IEC 6LR61) type  
battery is recommended. Carbon-zinc battery  
may be used but memory holding time will  
Setting alarm time  
be substantially reduced. Memory holding  
1. Press and hold SET ALARM to enter alarm setting  
time for a fresh alkaline battery is approximately 8  
hours (if alarm is not operated) which should take  
care of short, nuisance-type AC power failures. To  
preserve battery life, the unit should remain plugged  
into an AC outlet. As the battery gets older, its  
voltage drops and memory may be lost. Be sure to  
replace the battery periodically. Battery should be  
removed if the unit will be stored for more than one  
month. A leaky battery can badly damage unit.  
mode.  
ALARM ON/OFF – Turn the alarm on/off  
2. While holding down SET ALARM, press HR to set the  
hour.  
LIGHT ON/OFF – Used to illuminate the SNOOZE button  
The clock is in 12 hour format. The PM indicator will  
appear for showing a PM time.  
HR – Adjust hour in clock setting mode or alarm setting  
mode  
2. While holding down SET ALARM, press MIN to set the  
To install the battery:  
minute.  
1. Remove battery compartment door (located at the  
bottom of the clock) by applying thumb pressure to the  
tab on battery door and then lift the door out and off  
the cabinet.  
3. Release SET ALARM to confirm and exit alarm setting  
MIN – Adjust minute in clock setting mode or alarm  
setting mode  
mode.  
Turning on/off the alarm  
1. Slide the ALARM ON/OFF switch to the ON position.  
The AL indicator will turn on to show that the alarm is  
on.  
2. Slide the ALARM ON/OFF switch to the OFF position.  
The AL indicator will turn off to show that the alarm is  
off.  
SET TIME – Enter clock setting mode  
Battery  
compartment  
SET ALARM – Enter alarm setting mode  
SNOOZE – Enter snooze mode where the alarm will quiet  
but sound again once the snooze period is over  
Ways to turn off alarm  
To silence the wake function momentarily, press  
SNOOZE. The alarm will be on again when the snooze  
period (9 minutes) is over.  
2. Connect a 9-volt alkaline battery (not included) to the  
connector plug.  
3. Replace the compartment door.  
To disable the wake function completely, slide the  
ALARM ON/OFF switch to the OFF position. The AL  
indicator will turn off to show that the alarm is off.  
Light  
Slide the LIGHT ON/OFF switch to the ON position to  
illuminate the light on the SNOOZE button.  
 

Q Logic Marine RADAR 2 Gb Fibre Channel to PCI X Host Bust Adapter User Guide
Renesas Network Card M16C 30P User Guide
RIDGID Impact Driver End Pipe Wrench User Guide
Russound Switch ISH1 User Guide
Ryobi Chainsaw P514 User Guide
Sanyo Air Conditioner 42TW72R User Guide
Sanyo DVD Player DVD SL20 User Guide
Senco Air Compressor PC2014 User Guide
Senco Nail Gun YK0368 User Guide
Sennheiser Headphones 502818 User Guide