OWNER’S MANUAL
Item Number:
10175001
BEFORE YOU BEGIN
Remove the foam separators from the Sound Rocker and take unit out of box.
Check to make sure you have all the parts shown below and that all items are in good condition.
CAUTION: Keep
fingers clear of the folding seam
when opening the unit.
Note: Replacement cables and mini
adapters can be purchased at your
local audio accessory dealer.
11 ft. 12-volt AC power adapter
11 ft. red and white
RCA audio cable
2.5 mm mini
plug adapter
3.5 mm mini plug
to RCA plug adapter
(2) RCA audio cable
extenders
FEATURES
4-inch speakers
MP3 pocket
MP3 and portable CD player plug
Headphone port
Connect headphones here.
Power AC port
Connect supplied 12-volt power
adapter here.
Control Panel
Volume/power knob
Twist to click on and power up
and adjust the volume level.
Source knob
Multi-player RCA audio output ports
Connect up to four Sound Rockers together for multi-user fun.
Select input for video games,
home theater, satellite receiver
and stereo receiver. Select MP3
for MP3 and portable CD players
connected to the MP3 and portable
CD player plug.
Input RCA audio ports
Connect red and white RCA audio cable here from game
consoles, home theater, satellite receiver and stereo receiver.
Bass knob
Twist to adjust the bass to your
preference.
2
SET-UP
CAUTION: Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.
11 FE
E
T
OR LES
Place the Sound Rocker so
that the control panel is less than
11 ft./3.5 meters from the power
source.
Connect the 12-volt AC power
adapter to the electrical outlet and
then to the power AC port on the
control panel.
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
5 Check the speakers on top to
see if the Pyramat logo is lit up.
Twist volume knob to power off the
Sound Rocker, then proceed to the
connection method shown below
for your audio/video device.
Twist the volume knob to click
on the power.
CONNECTION METHODS
MP3 and Portable CD Player Connection
CAUTION: Power
off all audio/video devices prior to
proceeding with the Sound Rocker
connection method.
Turn the source knob on the
3 With the cord next to the
pocket, connect the player to the
Sound Rocker.
2Slip your player into the MP3
pocket on the side of the Sound
Rocker.
control panel to MP3.
Note: For audio devices with a
smaller input jack, use the supplied
2.5 mm mini plug adapter.
3
CONNECTION METHODS
XBOX 360TM, PLAYSTATION 2TM PLAYSTATION 3TM, GAMECUBETM and others
There are four types of audio/video cables that come with video game consoles:
1. Standard AV/RCA Cable
(red, white–audio; yellow–video)
2. S-Video AV/RCA Cable
(red, white–audio; yellow, black–S-video)
3. High Definition AV/RCA Cable
(red, white–audio; yellow, blue, red, green–video)
4. Coaxial Connection
(single black cable)
If you have this cable, you need to purchase the RCA
audio cable from the console manufacturer. Or, you can
connect the Pyramat through an intermediary audio
source such as a TV, DVD, VCR, etc. (see below).
TV
The yellow RCA video cable
VIDEO
GAME
CONSOLE
connects to the video input
jack on the TV. Refer to the
instructions from the video
game console’s manufacturer
to connect any other video
cables to your TV.
RCA AUDIO CABLE
EXTENDERS
White
Red
White
Red
Yellow
Turn the source knob on the
control panel to input. Proceed to
the connection method for your
video game console.
For standard AV/RCA Cable, S-Video AV/RCA Cable and High Definition AV/RCA Cable
Connect the RCA audio cable extenders to the red and white audio cables from the video game console. Connect the
supplied RCA audio cable to the video game console’s red and white audio cables and plug into the input jacks on the
Sound Rocker. Follow the instructions from the video game console’s manufacturer to connect the video cable to your
television.
OR
2 Coaxial Cable Connection
If your video game console has a coaxial cable instead of an RCA audio cable, then use the instructions provided by
the video game console’s manufacturer to hook up the video game console through an intermediary device (such as a
TV, DVD, VCR, satellite receiver, etc.). Your intermediary device must have both a coaxial input jack (the standard jack
for cable TV) and an RCA audio output jack, or you can purchase an RCA replacement cable directly from the console
manufacturer. Then follow the audio/video device connection instructions to connect your Sound Rocker.
Audio/Video Device Connection
TV, DVD PLAYER, VCR, SATELLITE RECEIVER, STEREO
TV
DVD
VCR
AUDIO
OUTPUT
White
Red
White
Red
SATELLITE
RECEIVER
STEREO
Turn the source knob on the
Connect the supplied RCA audio cable from the red and white input jacks on the Sound Rocker to the red and white
control panel to input.
audio output connection on your audio/video device.
4
CONNECTION METHODS
CONNECT UP TO FOUR SOUND ROCKERS TOGETHER FOR MULTI-USER FUN!
VIDEO GAME
SYSTEM
TV
AUDIO
OUTPUT
DVD
VCR
SATELLITE
RECEIVER
STEREO
After connecting one Sound Rocker to an audio/video device, you can connect additional Sound Rockers together. Connect the supplied RCA audio cable to
the multi-player connection on the first Sound Rocker and then to the input connection on the second Sound Rocker. Repeat to add more Sound Rockers.
5
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Solution
Unable to hear sound
The RCA audio cables are not
connected properly.
Check the connection on your audio/video device. The RCA cables should be
connected to the AUDIO OUTPUT jacks. Check the connection on your rocker.
The RCA cables (red and white) must be in the AUDIO INPUT ports.
The AC power adapter is
disconnected from the electrical
outlet or the electrical outlet has
no power.
Check the plug on the AC power adapter. When properly connected with the
volume knob on, the logo on the back of the rocker will illuminate.
If the Sound Rocker still doesn’t power up, try another electrical outlet.
The source knob on the control
panel is in the wrong position.
Turn knob to input for video games and audio/video devices. Turn knob to
MP3 for MP3 and portable CD players.
Unable to connect to the
gaming console
Cables are incorrectly connected.
Check that the console’s RCA audio cables are connected to the Sound
Rocker’s RCA audio cables (red to red and white to white).
Check that the Sound Rocker RCA audio cables (red and white) are connected
to the AUDIO INPUT jacks on the rocker.
Check that the console’s RCA video cable (usually yellow) is connected to the
VIDEO INPUT jack on the TV.
If your video game console has an RCA audio cable, then connect the RCA
audio cable extenders to the red and white audio cables from the video game
console. Connect the supplied RCA audio cable to the video game console’s
red and white audio cables and plug into the input jacks on the Sound Rocker.
Your video game console has a
coaxial cable instead of an RCA
audio cable
Use the instructions provided by the video game console’s manufacturer to
hook up the video game console to an intermediary device (such as a TV,
DVD, VCR, satellite receiver, etc.). Your intermediary device must have
both a coaxial input jack (the standard jack for cable TV) and an RCA audio
output jack.
Purchase an RCA replacement cable directly from the console manufacturer.
Check that all RCA audio connections are correct – red to red, white to white
Sound only plays from one RCA cables are incorrectly
speaker.
connected.
Audio/video device has a single
MONO audio output (a common
problem when connecting to an
older TV or VCR).
If your audio source is mono only, as found mainly on older model TVs and
VCRs, an RCA “Y” adaptor (1 male to 2 male; not included) is needed to send
the signal to both Pyramat speakers. Please note: the use of this type of
adapter will not produce a true stereo sound. For optimal performance, it is
recommended that you connect your Pyramat product to stereo outputs only.
No sound will play from the RCA audio cables are incorrectly
Sound Rocker.
connected.
RCA audio cables (red and white) must be plugged in to AUDIO OUTPUT jacks
in the source device (TV, VCR, etc.). If you are plugging the cables to the jacks
in the front of your TV these are most likely AUDIO INPUT jacks.
Sound Rocker plays sound Source knob is not on the correct
See page 2 for the correct knob position for the device you are playing.
from one source but not
another.
setting.
RCA cables are incorrectly
connected.
Check that all RCA audio connections are correct – red to red, white to white
Missing or broken cables or
mini adapters.
Replace items immediately. Replacement cables and mini adapters can be
purchased at your local audio accessory dealer.
Missing or broken power
adapter.
Replace immediately with an authorized Pyramat power adaptor. Do not use
the unit until the damaged power adapter has been replaced.
or call toll-free at 877-591-1012
6
WARRANTY
S2000 Sound Rocker Limited Warranty
REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. PYRAMAT SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE LENGTH OF THIS WARRANTY.
Pyramat warranties this product and any included
accessories against defects in material and
workmanship for a period of 90 days from the date of
first consumer purchase. This warranty is enforceable
only by the original purchaser. ALL DAMAGED OR
MISSING PARTS MUST BE REPORTED WITHIN 14
DAYS OF PURCHASE.
This warranty covers all defects in materials and
workmanship, but DOES NOT COVER the following:
1. Damage, deterioration or malfunction resulting from:
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you.
a. Acts of God, accident, misuse, abuse, negligence,
improper installation, maintenance or operation, or
failure to follow the instructions contained in this
manual.
TO OBTAIN WARRANTY SERVICE
For service assistance, product information, or to locate
the dealer nearest you, please call or write:
b. Any shipment of the product (claims must be
presented to the carrier).
c. Repair, attempted repair or modification by anyone
other than the Pyramat Service Center.
Pyramat Service Center
877-591-1012
2. Any unit which has been altered or on which the
serial number has been defaced, modified or removed.
For further information on how to order accessories for
this product or other Pyramat products, please visit our
website at www.pyramat.com
3. Any unit used for industrial or commercial purposes.
4. Products sold AS IS or WITH ALL FAULTS, or
consumables (such as fuses or batteries).
IMPORTANT
For your records, save your original sales receipt with
this manual and write the serial number here.
5. Customer installation, set-up, adjustments or signal
reception problems.
Pyramat will repair or replace (at its discretion) units
covered by this warranty, without charge to the
consumer for labor or materials. CONSUMER IS
RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL
CHARGES AND ANY INITIAL SHIPPING CHARGES.
However, we will pay the return shipping charges to
any destination within the United States if repairs are
covered by the warranty.
7
If you have problems with your Sound Rocker,
DO NOT RETURN TO STORE.
Follow instructions in this manual.
Failure to follow these instructions may damage
your Sound Rocker and void your warranty.
or call toll-free at
Printed in China for:
Pyramat, LLC
PO Box 3610
Cerritos, CA 90703
© Copyright 2006 Pyramat, LLC
051606
8
|