Wireless Telephone Quick Reference Guide
Comdial DXP/DX/FX
8012S Impact Speakerphone
FCN 2/FWD
FCN 3 /PICK
FCN 4/PAGE
FCN 5
LINE 1
LINE 2
LINE 3
LINE 4
LINE 5
LINE 6
LINE 7
LINE 8
FCN 6
FCN 7
FCN 8/Exit
Menus
FCN #
FCN 0
FCN*
SHIFT
FCN 9
TRNS/CONF
FCN 1
MUTE
HOLD
LINE 9
LINE 0
FLASH
SpectraLink 6020 Wireless Telephone
8012S Impact Speakerphone
On/Off Press and hold END. Two
chirps on, one chirp off
Pressing LINE followed by a digit (1-8) on the Wireless
Telephone is equivalent to pressing one of the line buttons
(1-8) on the 8012S. LINE + 9 is Intercom.
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
FCN followed by a digit (2-9) on the Wireless Telephone is
equivalent to using Shift Buttons (1-7) on the 8012S
station set.
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
FCN followed by * on the Wireless Telephone is equivalent
to using Softkey 1, FCN 0 equals Softkey 2, and FCN #
equals Softkey 3.
Answer Press HOLD to put your current
second call call on hold, or END to hang up.
Press LINE + the digit that is
Function Key
Strokes
Default
Settings
Fill In Your
Feature Settings
flashing.
Hold Press HOLD
FCN + 1
FCN + 2
FCN + 3
FCN + 4
FCN + 5
FCN + 6
FCN + 7
FCN + 8
FCN + 9
FCN + *
FCN + 0
FCN + #
MUTE
FWD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
PICK
PAGE
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
EXIT MENUS
TRNS/CONF
settings.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
1725-36149-001_E
Comdial is a registered trademark of
Comdial Corporation
For technical support, please contact
your facility’s Network Administrator.
|