MiniPortrait Camera
Model 205
User Manual
Table of contents
Certifications
2
1
Setting up
Using this guide
5
6
7
8
9
Unpacking the camera
The camera
Setting up the work area
Setting up the camera
Technical Assistance
10
2
Loading film
Inserting fresh film
12
14
15
16
Removing spent film
Cleaning the rollers
Cleaning the film exit door
3
Taking a picture
Preparing the camera
Taking the photo
18
20
3
4
5
Using the camera menus
Using the menu buttons
24
25
Understanding the options
Troubleshooting
Correcting common errors
27
Polaroid Warranty and Service
MiniPortrait 205 Camera warranty
MiniPortrait 205 Camera service
Polaroid Offices and Service Centers
29
30
31
4
1 Setting up
The Polaroid MiniPortrait 205 Camera lets you quickly and
easily take instant photos for use with ID systems. You can
use the camera to take ID photos for use on passports, identi-
fication cards, credit cards, and many other small formats.
Using this guide
This guide describes all the features of the Polaroid Mini Por-
trait 205 Camera. It takes you from unpacking the box to set-
ting up the camera, through troubleshooting problems you
may have with photos.
This guide is written for the person who will be setting up and
running the camera. You do not need to have any prior
knowledge of Polaroid cameras in order to use this new por-
trait camera.
5
Unpacking the camera
The following figures illustrate the standard parts you will find
in the camera box, in addition to this manual. If you are miss-
ing anything, contact your dealer or Polaroid Customer Sup-
port at (800) 343-5000 immediately.
a
b
MiniPortrait 205 Camera (a)
an AC adapter
depending on the configuration ordered, you may receive
the wall-mounted unit for 110V (b) or, for all other volt-
ages, the table-top unit (c)
a
b
c
6
The camera
The following illustrates the parts of the camera.
a Display
i Face Brightener button
b Menu icon
c Up icon
j Aiming button
k Exit con
d Shutter button
e On button
l Down icon
M Flash
f Camera back
g AC adapter socket
h Aiming light selector
n Lenses
o Aiming lights
p Aperture selector switch
a
b
c
d
e
l
k
j
i
f
h
g
m
n
p
o
7
Setting up the work area
You need the following items when setting up your work area:
·
·
·
·
·
the camera
a wastebasket
a non-reflective cloth backdrop for ID photos
a white backdrop for passport photos
a chair, 17 to 18 inches (45cm) high
To set up the work area for the MiniPortrait Camera (a):
1
2
Use a work area that measures 8 X 10 feet (2.4 X 3m).
Make sure an electrical outlet (b) is accessible to the
camera. Avoid placing the camera where it may be ex-
posed to extreme temperatures, for example, near a door
or window.
3
4
Use a wastebasket (c) for discarding tabs and film waste.
Place the backdrop (d) behind where the subject will be
seated. Passport regulations require a white background.
For ID pictures hang a piece of non-reflective cloth as a
backdrop.
5
Place a chair (e) against the backdrop.
d
a
b
e
c
8
Setting up the camera
Setting up the camera is simple; just follow these steps and
you'll have your MiniPortrait 205 Camera set up and ready to
take photos in no time.
Note: The following instructions refer to the callouts in the il-
lustrations in the section, The camera, earlier in this chapter.
Preparing the camera
To set up the camera:
1
Power up the camera by plugging the small end of the AC
power cord into the socket on the back of the camera (g).
Plug the other end of the cord into a grounded AC outlet.
The display reads Load Film if the camera does not con-
tain film. If the camera contains film, the display reads
"Wait" for a warm-up period of about 15 seconds. After
warm-up, it reads Ready.
2
Adjust the aperture switch (p) on the front of the camera
for the recommended f-stop. To adjust the aperture
switch, move the switch to the desired setting.
Film Speed
ASA 80
Aperture
f11-1/2
f11-1/2
f16
ASA 100
ASA 125
ASA 3000
f64
Note: Use these settings at 75oF (24oC) and above. At
colder temperatures, you may have to adjust the settings.
Refer to the film instructions for details.
3
Set the aiming light switch (h) to the passport (PP) or ID
setting.
9
4
Use the camera's menu system to adjust the flash expo-
sure, number of exposures, and development time.
For detailed instructions on using the camera’s menus,
see Chapter 4, Using the camera's menus.
Technical Assistance
For technical assistance, call toll-free within the U.S.A.:
1-800-343-5000, Monday through Friday, 8 a.m. to 8 p.m.
(Eastern Time). Or, write to the Polaroid Resource Center,
201 Burlington Road, Bedford, MA 01730. In Canada, call
toll- free: 1-800-268-6970. Outside North America, please
contact the office nearest you.
10
2 Loading film
When you first turn on the camera, the display reads Load
Film. Loading film into the camera is quick and simple. After
you have loaded film a few times, you will not need to refer to
these instructions.
This chapter explains how to:
·
·
·
Insert a fresh film pack
Remove the spent film pack
Clean the processing rollers
11
Inserting fresh film
To insert a fresh film pack:
1
Insert a fresh film pack into the camera back with the
black paper tab facing you.
2
Check below the black tab to make sure you see a num-
ber of white tabs. One white tab is used for each film ex-
posure.
12
3
Close the camera back and rotate its latching cover,
making sure the black paper tab is outside the camera
back.
4
Pull the black paper tab out of the camera back, keeping
the tab perpendicular to the camera at all times. The best
method is to place the camera on a flat surface, grip the
camera with your left hand and pull the tab with your right
hand. This ensures that the film in the camera remains
aligned.
13
Removing spent film
To remove the spent film pack:
1
2
Open the film compartment and swing open the hinged
camera back door to access the spent film pack.
Remove the empty film pack by grasping it at the tab end,
pulling it up and lifting it out (see the first illustration on
page 12).
14
Cleaning the rollers
Clean the rollers each time you replace a film pack. To clean
the rollers:
1
2
Open the door of the camera back.
Remove the rollers by placing your thumbs at the ends of
the roller assembly and rotating it upward.
3
While the rollers are out of the camera back, wipe them
gently with a clean, lint-free cloth moistened with water.
4
Replace the rollers by placing the assembly against the
film exit door and rotating it downward.
15
Cleaning the film exit door
Check the film exit door and remove any pieces of paper or
dried film developer.
16
3 Taking a picture
Taking pictures with the Polaroid MiniPortrait 205 Camera is
simple. It requires only a few steps to produce high quality
passport or ID photos.
This chapter describes the steps you should take each time
you take a photo. The first few times you use the MiniPortrait
205 Camera, follow these instructions closely. After you are
familiar with the steps, you will be able to take photos on your
own. This chapter tells you how to:
·
·
Prepare the camera to take photos
Take the photo and process the exposed film
17
Preparing the camera
To prepare the camera to take passport or ID photos:
1
Plug the AC power cord into the back of the camera and
into a wall outlet. The camera will power up.
The display shows one of two messages. If there is film in
the camera, the display reads “Wait” for a warm-up pe-
riod of about 15 seconds, then it reads Ready. If there is
no film in the camera, the message reads Load Film.
2
3
If necessary, load film into the camera. Refer to Chapter
2, Loading film for detailed instructions.
Place your subject in a chair against the backdrop. For
best results, position the subject as close to the backdrop
as possible. Remember, passport photos require a white
background. For questions regarding passport specifica-
tions and techniques, call toll-free: 1-800-343-5000.
Note: For passport photos, move the aiming light selector
to “PP”; for ID photos, set the selector to “ID”. Refer to the
section The camera, in e selev0t 3e
18
4
Press the Aiming button and aim the lights at your sub-
ject. The lights blink for 15 seconds while you aim the
camera.
Note: The aiming lights must be blinking in order for you
to take a picture.
5
Position the camera so that the lights converge on your
subject's chin.
19
6
If your subject has a dark complexion, press the Face
Brightener. Refer to The camera, in Chapter, 1 for loca-
tion of the Face Brightener. A Face Brightener icon ap-
pears on the display when you press the button. The
Face Brightener function turns off and its icon disappears
after you take the picture. To turn the Face Brightener
function off before you take the picture, press the button
again.
When you turn the Face Brightener function on, the cam-
era increases the flash output by 0.3 to 0.5 photographic
stops.
Taking the photo
To take a photo:
1
Press the Shutter button.
After you press the button, the display reads Pull Film, or
if the camera is set to take another picture on this sheet
of film, it reads Ready. If it reads Ready, take another
picture.
Note: You can take the two pictures at the same time,
giving you two of the same pose, or you can take one
picture after another, giving you two different poses. To
set the number of photos to be taken at once, refer to
Chapter 4, Using the camera's menus.
20
2
To begin processing the film, pull the white film tab,
keeping the tab perpendicular to the camera at all times.
Rest the camera on a flat surface and pull the tab straight
out using the right hand. This ensures that the film in the
camera remains aligned.
3
Pull the yellow tab, keeping the tab perpendicular to the
camera. Position the camera and pull the tab as de-
scribed in 2 above. A smooth, straight pull will prevent
blemishes in the picture.
As soon as you pull the yellow tab, the camera starts
counting the exposure time of the film. In addition, the
number of the exposure currently being timed blinks on
the display.
21
4
When the camera timer beeps, peel the back from the
print.
You can lighten or darken your picture by adjusting the
aperture selector and/or the flash exposure setting (using
the program menu). To lighten the picture, move the ap-
erture selector to the left or increase the flash exposure.
To darken the picture, move the aperture selector to the
right or decrease the flash exposure.
22
4 Using the camera menus
The Polaroid MiniPortrait 205 Camera has a menu system
that allows you to adjust the functions of the camera. You
can set up the camera to work in the way you prefer.
This chapter covers the following:
·
·
Using the menu buttons
Understanding the menu options
23
Using the menu buttons
The buttons that you use to operate the camera's menus are
located at the top of the back of the camera. They are usually
called the On, Aiming, Face Brightener, and Shutter buttons.
However, when you are using the camera's menus, the four
buttons control alternate functions.
To enter the menu system, press the On button. Once you
press the On button, the display shows the camera's menus.
The On button now controls the Menu functions. Press the
Menu button to select each subsequent menu. Pressing and
holding the Menu button allows you to scroll quickly through
the menu choices.
When you are using the camera's menus, the Aiming button
controls the Exit function. To move out of the menu system,
press the Exit button.
When you are using the camera's menus, the Face Brightener
button controls the Down function. To make adjustments
within your menu choice, press and hold the Down button.
When you are using the camera's menus, the Shutter button
controls the Up function. To make adjustments within your
menu choice, press and hold the Up button.
24
Understanding the options
There are seven menu options. They are:
·
Counts
Exposure
·
·
·
·
·
·
Picture Select
Development Time
Reset Counts
Language
Auto Shutoff
Counts
The Counts menu item shows two readings from the cam-
era: Film and Flash. The number under the word Film reports
the number of sheets of film that have been pulled from the
camera. The number under the word Flash indicates the
number of times the flash has fired. You cannot make any
adjustments to this screen.
Exposure
To move from Counts to Exposure, press the Menu button.
The display shows the range of exposure settings. You can
set the camera to one of seven exposure settings. To increase
exposure, press the Up button. To decrease the exposure,
press the Down button.
Picture Select
To move from Exposure to Picture Select, press the Menu
button. The display shows the number of pictures the cam-
era is set to take. Press either the Up or Down button to se-
lect the number of pictures. The display changes to indicate
the number of pictures that the camera will take with each
press of the Shutter button.
25
Development Time
To move from Picture Select to Development Time, press the
Menu button. The display shows the number of seconds set
for development time. To increase the development time,
press the Up button. To decrease the development time,
press the Down button.
Reset Counts
Language
To move from Development Time to Reset Counts, press the
Menu button. To reset the Counts display (described earlier)
to all zeros, press the Up or Down button.
To move from Reset Counts to Language, press the Menu
button. The display shows the language set for display mes-
sages. Press the Up or Down buttons to select the language
you want the camera to display.
Auto Shutoff
To move from Language to Auto Shutoff, press the Menu
button. The display shows the current setting for Auto Shutoff
time. You can program the camera to shut off automatically
when it has been idle for the displayed amount of time. When
Auto Shutoff is set to 10 minutes, the camera shuts off if it
has not been used for 10 minutes. When Auto Shutoff is set
to 20 minutes, the camera shuts off if it has not been used for
20 minutes. When it is set to OFF, the camera remains on
until it is unplugged.
To move from Auto Shutoff out of the menu system, press the
Menu button. The display changes from the cameras menus
to the Ready message. At any time while using the camera
menus, you can press the Exit button to leave the menus.
Exit
26
5 Troubleshooting
Correcting common errors
From time to time you may observe faults with your photos.
The following information will help you solve problems you
may encounter.
Picture Fault
Cause
Corrective Action
Repeated, evenly
spaced spots
Dirty developer roll-
ers.
Clean developer
rollers.
Missing corners, or
orange-red marks
along edges
Pull the film tab from
the camera at an
angle.
Pull the yellow/black
film tab straight from
the camera.
Dried developer on
rollers.
Clean the rollers.
Rectangular outline in The white leader was
Pull white tab com-
pletely out of the
camera before pulling
the film from the
camera.
print
not pulled completely
off prior to pulling the
film tab; white tab
passed through the
rollers with film.
27
Picture Fault
Cause
Corrective Action
Small, white specks,
pink lines, streaks or
blotches
Pulling the film
through the rollers
too fast.
Pull the film using a
smooth, even, mod-
erate pull speed.
Muddy-looking print
Development time not Develop film for time
long enough.
recommended in film
instruction sheet.
Broad streak or mark
across the picture
Hesitating while pull-
ing the film from the
camera.
Pull the film tab
straight out in one
motion, without hesi-
tation.
Very light or no image Film fogged or ex-
tremely overexposed.
Do not remove the
safety cover prior to
loading the film.
Do not open the
camera and remove
the film pack while
taking a picture.
28
MiniPortrait 205 Camera warranty
Polaroid Corporation warrants the MiniPortrait 205 Camera
against defects in manufacture or workmanship for a period of
one year from the date of purchase. To verify the warranty
period, you should keep the invoice, sales receipt, or other
proof of the purchase date.
Should this product or any component or accessory included
with it, except software, prove to be defective at any time
during the warranty period, Polaroid Corporation will, at its
discretion, either replace or repair this item, without charge.
This warranty does not cover damage caused by accident, in-
correct installation, unauthorized modification, and misuse or
abuse. A charge will be made for repair of such damage.
This warranty excludes all consequential damages and
does not affect your statutory rights. Some jurisdictions
do not allow the limitation or exclusion of consequential
damages, so the foregoing may not apply to you.
29
MiniPortrait 205 Camera service
U.S.A. and Canada
If your MiniPortrait 205 Camera requires service, call Polaroid
Technical Assistance toll-free from within the U.S.A. at 1-800-
343-5000, Monday through Friday, 8 a.m. to 8 p.m., (Eastern
Time). From Canada, call toll-free at 1-800-268-6970.
To return the camera for service, pack it carefully in its origi-
nal shipping carton or other sturdy container, with plenty of
padding. Shipping instructions will be provided by your
Polaroid Technical Assistance specialist.
Outside North America
Please contact your nearest Polaroid dealer (see the section
immediately following).
30
Polaroid Offices and Service Centers
Australia
España
Polaroid Australia Pty Ltd
13-15 Lyonpark Road
PO Box 163
North Ryde, NSW 2113
Tel.: (02) 950 7000
Fax: (02) 887 2209
Polaroid (España), S.A.
Calle Orense 16, 2a planta.
28020-Madrid, Spain
Tel.: 34-1-597 02 52
Fax: 34-1-597 27 82
France
Belgique/Beigië
Polaroid (France) S.A.
12 Bis Ave. Gay Lussac78391
La Clef de Saint-Pierre, B.P. 7
Polaroid (Belgium) S.A.-N.V.
rue Colonel Bourg 111
Kolonel Bourgstraat 111
1140 Bruxelles-1140 Brussel
Tel.: 32 2 702 86 20
Fax: 32 2 726 92 99
Toll free line: 32 2 78 155 905
Brasil
Polaroid do Brasil Ltda.
Av. Paulista, 1776/11o andar
Cerqueira Cesar
São Paulo - Capital
01310-921
Tel.: 55.11.285.6411
Fax: 55.11.287.5393
Canada
Polaroid Canada Inc.
350 Carlingview Drive
Etobicke, ON M9W 5G6
Tel.: 1 416 675 3680
Fax: 1 416 675 4245
Toll free: 1-800-268-6970
Danmark
Polaroid a.s.
Blokken 75, 3460 BirkerØd
Tel.: 45 42 81 75 00
Fax: 45 42 81 70 26
Deutschland
Polaroid GmbH
Sprendlinger Landstrasse 109
63069 Offenbach
TeI.: 49 69 840 4100
Fax: 49 69 840 4204
31
México
Portugal
Polaroid de México S.A. de C.V.
Paseo de la Reforma 195-Piso 17
C.P. 06500 México, D.F.
Tel.: 52 5 703-1111
Polaroid (España) S.A.
Sucursal em Portugal
Edificio Monumental
Avenida Praia da Vitória 71-A, 4oB
1050 Lisboa
Fax: 52 5 566-0505
Del interior al 91 (800) 70-727
Ventas 91 (800) 70-747
Tel.: (35 1) 316.10.49
Fax: (35 1) 316 10 56
Nederland
Puerto Rico
Polaroid Nederland B.V.
Zonnebaan 45
Polaroid Caribbean Corporation
Centro de Seguros
3606 CH Maarssen
Tel.: 31-30-2410-420
Fax: 31-30-2411-969
Ave. Ponce de León 701,
Miramar, Santurce 00907
Tel.: (1 809) 725-6240
Fax: (1 809) 725-5462
Reparaties:
Polaroid (Europa) B.V.
Hoge Bothofstraat 45
7511 ZA Enschede
Tel.: 31 53 4865 400
Schweiz/Suisse/Svizzera
Polaroid AG
Hardturmstrasse 133
8037 Zürich
Tel.: (41 1) 277.72.72
Fax: (41 1) 271 38 84
New Zealand
Polaroid New Zealand Ltd
Camera Services
24-26 Anzac Avenue
Auckland
Suomi
Polaroid Oy
Sinikalliontie 10
02630 Espoo, Finland
Tel.: 358 0:-502 35 33
Fax: 358 0 502 35 50
Tel.: (64 9) 377 3773
Norge
Polaroid (Norge) A/S
Industriveien 8B
1471 Skårer
Sverige
Polaroid AB
Tel.: 47 67 90 47 10
Fax: 47 67 90 51 73
Ekholmsvägen 36, Box 204
127 24 Skärholmen, Sweden
Tel.: 46 8-710 08 50
Fax: 46 8-740 73 68
Österreich
Polaroid Ges.m.b.H.
Eitnergasse 5A
1231 Wien
Tel.: 43 1 869 86 27
Fax: 43 1 869 81 00
U.S.A.
Polaroid Corporation
Technical Assistance
Toll Free: 1-800-343-5000
“Polaroid” and “MiniPortrait” are registered trademarks of Polaroid Corporation, Cambridge, MA 02139, U.S.A
PU20093M
Printed in the U.S.A.
11/97
|