Plantronics Bluetooth Headset C710 User Manual

Blackwire® C710 /C720  
Corded USB headset with Bluetooth  
®
User guide  
 
Welcome  
Congratulations on purchasing your new Plantronics product. This user guide contains  
instructions for setting up and using your Blackwire C710/C720 Bluetooth headset.  
Please refer to the separate safety instructions for important product safety information prior  
to installation or use of the product.  
Blackwire C710/C720 next generation technology.  
Featured highlights and Smart Sensor technology:  
• Auto answers calls by simply putting on your headset.  
• Auto transfers calls between mobile phone and headset.  
• Softphone presence can be automatically updated.  
• Integrated A2DP (Advanced Audio Distribution Profile for Bluetooth) lets you listen to media audio.  
• Voice prompts announce power on/off, battery level, connection status, and more.  
System Requirements  
Computer  
• Supported Operating Systems:  
Windows XP®SP3 or later,  
Windows Vista® SP1 or later,  
Windows® 7 SP1 or later recommended  
MAC OS X 10.6.8 or later  
• Processor: 400 MHz Pentium® processor or equivalent (Minimum); 1 GHz Pentium processor or  
equivalent (Recommended)  
• RAM: 96 MB (Minimum); 256 MB (Recommended)  
• Hard Disk: 280 MB (Minimum); 500 MB (Recommended)  
Browser  
• Internet Explorer® V6 or better must be on the user’s system (Required)  
Registering your product online  
Visit plantronics.com/productregistration to register your product online  
so we can provide you with the best possible service and technical support.  
Technical assistance  
Visit our web site at plantronics.com/support for technical support including frequently asked  
questions, compatibility and accessibility information.  
3
 
What’s in the package  
OR  
2
1
3
4
1 Blackwire C710 Headset with inline controller (monaural) or  
2 Blackwire C720 Headset with inline controller (stereo)  
3 Blackwire C710/C720 USB cable  
4 Carrying case  
4
 
Headset features  
3
2
1
9 8  
6 5  
4
10  
7
1 Right ear cushion  
2 Adjustable headband  
3 Left ear cushion  
4 Noise-cancelling microphone  
5 Mobile talk and Bluetooth on/off button  
6 Volume up/volume down bar  
7 Inline controller  
8 Mute/unmute button  
9 PC talk button  
10 USB cable/connector  
5
 
Accessories/Spares  
(Sold separately)  
Carrying case  
Foam ear cushions  
Leatherette ear cushions  
Blackwire C710/C720 USB cable  
noTe For more information on accessories and spares, please visit us at  
plantronics.com/accessories.  
6
 
using your headset  
Inline controls  
Can be used to answer or end a call directly from the headset with  
a single press. LED will rapid flash blue when a call is coming in and  
slow flash blue when on a call. Can be used to manually turn on or off  
the Bluetooth radio with very long press; Bluetooth status will stay in  
last known state.  
Mobile talk button  
PC talk button  
Can be used to answer or end a call directly from the headset with a  
single press. LED will rapid flash green when a call is coming in and  
slow flash green when on a call. Can also be used to put a caller on  
hold with medium press.  
Volume up and down are available by pushing the bar up and down.  
Volume  
Mute  
A single press of the mute button will mute the microphone. A red LED  
will be on when you are muted. Pressing this button again will take  
the microphone off mute.  
CAuTIon For your safety, do not use headset at high volumes for extended periods  
of time. Doing so can cause hearing loss. Always listen at moderate levels. For more  
information on headsets and hearing visit: plantronics.com/healthandsafety.  
7
 
Wearing the headset  
1 To adjust the headband, lengthen or shorten the band until it fits comfortably. Position the  
headset receivers so that the cushions sit comfortably over the center of your ears.  
2 For the C710 headset position the stabilizer T-bar above your ear.  
3 Once the headset is positioned on your head, adjust the flexible boom so the tip of the boom  
points to the corner of your mouth. The boom can be shaped to follow the curvature of your  
face.  
noTe Headset is designed for boom to be worn on the left side of your face. To wear the headset  
so boom is on the right side, rotate the microphone boom upwards until it aligns with the right  
corner of your mouth. Left and right audio channels will be switched.  
8
 
Connect, charge, and make a mobile phone call  
Connect headset to PC  
1 Connect the USB cable to the PC and the inline controller.  
The first time you connect your headset to the PC, the mobile talk button on the headset will  
flash red and blue indicating the initial pairing process of your mobile phone.  
noTe If you do not want to pair your mobile phone now, press and hold the mobile talk button  
more than five seconds to power off the bluetooth radio. The LED will turn solid red for two seconds.  
See other features for more information.  
Charge your headset  
NOTE Your new headset has enough power to make a few mobile calls before charging is needed.  
When your headset is connected to the PC the mobile talk button will be solid red when charging and  
off when fully charged.  
1 Plug in your headset and place on a flat non-metallic surface. The sensors in your headset fully  
calibrate while charging.  
A full charge will take approximately two hours. When fully charged the LED goes off.  
NOTE Always charge at near room temperatures; never charge battery at temperatures below 0º C  
(32ºF) or above 40º C (104ºF).  
Headset battery levels  
With Plantronics Spokes® software installed, a headset icon will appear in your system tray,  
displaying battery status. The plantronics battery status will notify you of four different battery  
levels (25%, 50%, 75% and 100%). Fully charge the headset at least once to properly calibrate  
the battery status.  
Make a mobile phone call  
1 Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/  
discover new Bluetooth devices.  
BlackBerry® Settings/options > Bluetooth: On > Search for devices.  
iPhone Settings > General > Bluetooth > On (starts the search for devices)  
Android™ Phone Settings > Wireless > Bluetooth: On > Scan for devices.  
Other Consult phone manual  
9
 
NOTE For detailed pairing instructions for popular mobile phones visit plantronics.com/easytopair  
Blackwire C700  
2 If prompted by mobile phone, type 0000 as passcode.  
The mobile talk button will stop flashing when the headset has an active connection with the  
mobile phone.  
3 While wearing your headset, make a test call from your mobile phone.  
During an active call, the mobile talk button will flash blue.  
4 To use mobile phone away from PC, disconnect the USB cable from the inline controller.  
noTe When a fully charged headset is disconnected from the PC there is enough power to make  
four to five hours of mobile calls before charging is needed. Reconnect the headset to the PC and the  
mobile talk button will be solid red when headset is charging and off when fully charged.  
5 End the call by pressing the mobile talk button.  
TIP For iPhone users, the headset battery level is displayed on the iPhone home screen. The headset  
must be connected to the iPhone.  
The call does not end if you remove your headset without pressing the mobile talk button. See  
Advanced features.  
noTe For call control and other features, download Plantronics Spokes software at  
plantronics.com/software.  
10  
 
Placing a call with your headset and Bluetooth mobile phone  
Place a call  
Dial number on your mobile phone keypad.  
Redial last number*  
Double press mobile talk button. There will be a double low tone on each  
press. A low-low-high tone indicates the last number has been redialed.  
Activate voice dialing*  
Press and hold mobile talk button for two seconds. You will hear a tone  
followed by a second tone which indicates voice dial is activated.  
* Only available on mobile phones that support these features.  
Answering and ending calls with your headset and Bluetooth mobile phone  
Answer a call  
Short press mobile talk button.  
Answer a call when already on Short press the PC talk button to end the PC softphone call. Then press  
an active PC softphone call  
End a call  
the mobile talk button to answer the mobile phone call.  
Short press mobile talk button.  
Reject a call  
Press mobile talk button for two seconds until you hear a second long  
single low tone.  
Transfer a call from your  
While on a call, press the mobile talk button for two seconds until you  
mobile phone to your headset hear a single tone followed by a long low tone.  
Transfer a call from your  
While on a call, press the mobile talk button two seconds until you hear a  
headset to your mobile phone long low tone followed by low-low-high tones. Or if using smart sensors,  
remove the C710/C720 headset to transfer audio to your mobile phone.  
* Only available on mobile phones that support this feature.  
Mobile talk button behavior with PC and mobile connected (not on a call)  
Redials last number on  
mobile phone*  
Double press the mobile talk button.  
Starts voice dialing on  
mobile phone*  
Press the mobile talk button for 2 seconds.  
* Only available on mobile phones that support this feature.  
noTe For call control and other features, download Plantronics Spokes software at  
plantronics.com/software.  
Mobile talk button LED indicators  
Rapid flash blue  
Incoming call  
Active call  
Slow flash blue  
Slow flash blue  
Media audio  
Pairing mode  
Powering on  
Power off  
Flash red and blue  
Solid blue (two seconds)  
Solid red (two seconds)  
11  
 
Make a PC call  
1 Load Plantronics Spokes software by visiting plantronics.com/software and click “Download.”  
2 Reconnect USB cable to inline controller and the PC if disconnected.  
3 Confirm the speaker and microphone settings for your PC softphone are set to Plantronics  
Blackwire C710/C720 as shown below:  
PC audio setup for Windows 7 (To reach this screen: Control Panel > Sound)  
Default Setting: All PC sounds and audio is played in the headset.  
PC audio setup for Windows XP (To reach this screen: Start > Control Panel> Sound and Audio Devices)  
Default Setting: All PC sounds and audio is played in the headset.  
Blackwire C7xx  
Blackwire C7xx  
Blackwire C7xx  
Blackwire C7xx  
4 Place a call from your PC softphone. During an active call, the PC talk button will slow flash  
green.  
12  
 
noTe If you choose to NOT install Spokes software, your headset will still function as a standard  
audio device but the inline control buttons may not work with your softphone.  
Placing a call with your headset and PC Softphone  
To place a call  
Dial number from your PC softphone.  
Answering and ending calls with your headset and PC Softphone  
To answer a call  
Short press PC talk button.  
To answer a call when already  
Short press the mobile talk button to end the mobile phone call. Then  
on an active mobile phone call press the PC talk button to answer the softphone call.  
To end a call Short press PC talk button.  
PC talk button LED indicators  
Incoming call  
Rapid flash green  
Slow flash green  
Slow flash green  
Active call  
Media audio  
13  
 
Advanced features  
Smart Sensor technology  
Sensors detect whether or not you are wearing the headset. Sensors are located in the speaker  
capsule on the microphone boom side.  
Auto answer call:  
When you are not wearing your headset.  
When you have an incoming call on your mobile  
or PC softphone, put on the headset and the call  
will be answered automatically. You do not have  
to press the call button.  
Auto pause media:  
When you are listening to media audio.  
When you are listening to media audio from  
your mobile phone, remove the headset and the  
audio pauses. Place your headset back on and  
the audio resumes.  
Note If the media player has been playing  
less than 10 seconds you will have to  
manually restart the media player.  
Note If the audio remains paused for more  
than 5 minutes you will have to manually  
restart the media player.  
Note Auto pause media feature is only  
available with your mobile phone. PC media  
audio does not auto pause.  
Auto transfer call:  
Whether you are wearing your headset or not.  
If you are not wearing your headset and you  
answer an incoming call on your mobile phone,  
the audio will be routed to the mobile phone.  
When you put the headset on, the audio will be  
automatically transferred to the headset.  
If you are already wearing your headset and  
there is an incoming call, the audio will be  
routed to the headset and you will need to  
press the mobile talk button to answer the call.  
NOTE These features are enabled by default and can be disabled in the Plantronics Control Panel.  
The Plantronics Spokes software must be downloaded to access the Control Panel. Changes to the  
settings requires that you are connected to the PC. Load Plantronics Spokes software by visiting  
plantronics.com/software and click “Download.”  
Other features  
Auto connect  
When you are wearing your headset  
Automatically connects headset to mobile  
phone when Bluetooth headset is turned on  
and within range of devices. Voice prompt will  
announce you are connected.  
Manual pairing  
If powered on, press and hold the mobile talk  
button more than five seconds to power off the  
bluetooth radio.  
If powered off, press and hold the mobile talk  
button until the button flashes red and blue.  
14  
 
Simultaneous call handling behaviour (PC & mobile)  
You can be on a call using a PC softphone application and receive a mobile phone call. The  
ringtone for the mobile phone call is heard in the headset. Tapping the PC call button on the  
headset will end the PC softphone call. Tapping the mobile call button will answer the mobile  
phone call.  
NOTE Answering the call on your mobile phone sends the audio to the mobile phone and leaves the  
PC softphone call active on the headset.  
You can be on a mobile phone and receive a call on your PC softphone. The ringtone for the PC  
softphone call is heard in the headset during the call.  
Tapping the mobile talk button on the headset ends the mobile phone call. Tapping the PC talk  
button answers the PC softphone call.  
If you receive a PC softphone call and mobile call at the same time, tapping the mobile or PC  
talk button will answer the respective call.  
Listening to Audio via A2DP  
(Advanced Audio Distribution Profile for Bluetooth)  
Your Blackwire C710/C720 headset can play media files (music, podcasts, etc.) from any A2DP-  
enabled mobile device.  
Play/Pause  
See Auto pause media in the Smart Sensor features table.  
Customize  
Make it more personal  
Visit plantronics.com/myheadset to update and customize your headset with features like:  
• Language options for voice prompts  
• Disable/enable the sensors  
• Disable/enable “Mute off” voice prompt  
• Set “Mute on” reminder voice prompt  
• Firmware updates as they release  
• Plantronics apps to improve your hands-free experience  
NOTE You may hear unexpected voice prompts and tones when updating your headset.  
Transmission range  
If you are on a mobile call, you will hear the audio degrade as you move out of range of  
your mobile phone. If you stay out of range, active calls will be suspended. Calls will be re-  
established when you walk back into range.  
Your Blackwire C710/C720 allows you to roam as far as 30 feet between devices before the call  
is dropped. You will hear a voice prompt “Lost Connection” when the link is dropped.  
15  
 
Headset controls, indicators and voice prompts  
Action  
LeD  
Tone  
Voice prompt  
Incoming PC call  
alert  
N/A  
Rapid green flash Programmable  
ringtone  
N/A  
PC Call answer/end Short press PC  
Talk button  
Short green flash Answer: Single low  
tone followed by low-  
N/A  
low-high tones End:  
Single low tone  
PC Call “Flash”  
Adjust the listen  
Two second Press Short green flash Low Tone  
PC Talk Button  
N/A  
N/A  
Press volume up/ Single PC LED  
Tone at each change  
in volume. Double  
volume (during a call) volume down bar flash  
tone when min/max  
volume level reached  
Muting your  
microphone  
Press and release  
Mute Button  
On: Mute LED On On: Low-High Tones  
Off: Mute LED Off Off: High-Low Tones  
On: “Mute On”  
Off: “Mute Off”  
Mobile (Bluetooth) Press Mobile  
On: solid blue for N/A  
2 seconds  
Off: solid red for 2  
seconds  
On: “Power on”  
followed by “Phone  
Connected”,  
“No Phone is  
connected”, or  
“Pairing”.  
Power on/off  
Talk button for 5  
seconds  
Off: “Power off”  
Check if Mobile  
(Bluetooth) is  
powered on  
Short press Mobile Short blue flash  
Talk button  
Short Low Tone  
N/A  
Incoming Mobile  
call alert  
N/A  
Rapid blue flash  
Programmable  
ringtone  
N/A  
N/A  
Mobile Call  
answer/end  
Short press Mobile Short blue flash  
Talk button  
Answer: Single low  
tone followed by low-  
low-high tones  
End: Single low tone  
Reconnect Mobile Short press Mobile Single blue flash  
Phone after leaving Talk button  
range for more  
Single low tone  
“Phone connected”  
than 30 seconds  
Mobile redial last  
number *  
Double Press  
Mobile Talk button  
Two blue flashes Two low tones  
N/A  
N/A  
followed by low-low-  
high tones  
Mobile Activate  
Voice Dialing *  
Press and hold  
Mobile Talk button  
for 2 seconds  
Single blue flash  
Short low tone,  
followed by long low  
tone  
16  
 
Action  
LeD  
Tone  
Voice prompt  
Mobile Reject Call * Press and hold  
Mobile Talk button  
Single blue flash  
Short low tone,  
followed by long low  
tone  
N/A  
for 2 seconds  
Transfer Call Audio Press and hold  
Single blue flash  
Short low tone,  
N/A  
to/from Mobile  
Phone *  
Mobile Talk button  
for 2 seconds  
followed by long  
low tone. When  
call transferred to  
headset you will also  
hear the low-low-high  
indicating connected.  
Mobile (Bluetooth) With Bluetooth  
Red/Blue Flashing Short Low Tone  
“Power on” followed  
by “Pairing”.  
Pairing Mode  
powered off, press  
and hold the  
Mobile Talk button  
for 5 seconds.  
* Only available on mobile phones that support this feature.  
17  
 
Plantronics Spokes Software  
Plantronics Control Panel  
User preferences and device settings that affect the performance of your headset can be  
changed using the Plantronics Control Panel.  
To access the Plantronics Control Panel, load Plantronics Spokes software by visiting  
plantronics.com/software and click on the download button.  
To start this utility, click Start > Programs > Plantronics > Plantronics Control Panel.  
Devices settings  
Select your Blackwire C7xx from the pull-down menu then select Device Settings to configure  
settings for your headset system.  
18  
 
Applications tab  
Displays the status of Plantronics support for various applications such as softphones and  
media players.  
Preferences tab  
Allows you to set preferences for the media player as well as other general settings.  
19  
 
About tab  
Provides online access to the user guide and support and displays your headset system’s  
information.  
Plantronics Update Manager  
Check for updates automatically  
By enabling this check box, you will activate a periodic automatic check for available software  
updates.  
Check for updates now  
You can choose to check for available software updates at any time by clicking on the Check  
For Updates Now button in Update Manager: From the Start menu, click Programs, then  
Plantronics, then open Plantronics Update Manager.  
Install checked updates  
Following an AUTOMATIC or MANUAL CHECK FOR UPDATES, this field will be populated with  
any applicable software updates and the INSTALL CHECKED UPDATES will begin installation.  
20  
 
useful tips  
Clothing clip  
Attach the clip to your clothing about chest level. When at your PC, the clothing clip will reduce  
the weight of the inline controller for greater comfort. When using your mobile phone away  
from PC, the clip keeps the inline controller in convenient place.  
21  
 
Troubleshooting  
Troubleshooting — PC softphone usage  
I cannot hear.  
Ensure that the Blackwire C710/C720 is set as the default playback  
device in Windows.  
Ensure that the Blackwire C710/C720 is set as the audio device in  
the softphone (refer to softphone manufacturer for instructions on  
changing the audio output).  
Make sure that the individual volume settings on the headset, Windows  
and softphone are not turned down too low.  
I cannot be heard.  
Ensure that the Blackwire C710/C720 is set as the default recording  
device in Windows.  
Ensure that the Blackwire C710/C720 is set as the audio device in  
the softphone (refer to softphone manufacturer for instructions on  
changing the audio output).  
Make sure that the individual volume settings on the headset, Windows  
and softphone are not muted.  
I cannot answer a call with  
the headset.  
Ensure that the Blackwire C710/C720 is set as the audio device in  
the softphone (refer to softphone manufacturer for instructions on  
changing the audio output).  
Refer to the Plantronics compatibility guide  
download software to enable call control with your particular softphone.  
plantronics.com/software  
I cannot take my headset off Your softphone may need Plantronics Spokes software to synchronize  
mute using the softphone / I the mute control on the PC with the headset.  
cannot take the softphone off  
mute using my headset.  
Refer to the Plantronics compatibility guide  
plantronics.com/software  
The volume control on the  
headset does not adjust  
Windows volume.  
The headset volume is local unless you have installed Plantronics  
Spokes software. With the software, the headset volume is  
synchronised to Windows.  
plantronics.com/software  
Troubleshooting — Mobile phone usage  
My headset does not work Ensure that the headset is fully charged.  
with my mobile phone.  
Make sure the headset is paired with the mobile phone you are trying to  
use. See plantronics.com/easytopair  
My phone did not locate  
the headset.  
Turn both your mobile phone and headset off, then restart the mobile  
phone and repeat the pairing process. (See “Connect headset to PC”).  
I could not enter my PIN  
code.  
Turn both your mobile phone and headset off and on and then repeat the  
pairing process. (See “Connect headset to PC”). Your PIN code, or password,  
is 0000 (4 zeros).  
NOTE Many mobile phones input the password automatically during the  
pairing process. Your phone may not ask you to manually input a password.  
Audio quality is poor.  
Your headset is out of range. Move the headset closer to the mobile phone.  
22  
 
NEED MORE HELP?  
plantronics.com/support  
Plantronics, Inc.  
345 Encinal Street  
Santa Cruz, CA 95060  
United States  
© 2012 Plantronics, Inc. All rights reserved. Plantronics, Blackwire, C710, C720, Spokes, and Smart Sensor are trademarks or registered trademarks of Plantronics, Inc. Microsoft, Internet  
Explorer, Lync, Windows, Windows Vista, and Windows XP are registered trademark of Microsoft Corporation in the United States and / or other countries. BlackBerry is the property of  
Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. The Bluetooth trademark is owned by Bluetooth SIG, Inc. and any use of the mark  
by Plantronics, Inc. is under license. All other trademarks are property of their respective owners.  
Patents pending  
89282-06 (10.12)  
 

Petsafe Door PPA11 10709 User Manual
Philips Stereo Amplifier TDA1521A User Manual
Philips TV Cables SWX1233 User Manual
Pioneer Speaker System XWSMA1K User Manual
Pitco Frialator Fryer L22 345 User Manual
Polycom Clock VTX 1000 User Manual
Polycom Network Card EX FX VS4000 User Manual
Poulan Lawn Mower 187570 User Manual
Poulan Lawn Mower XT24H42LT User Manual
Psion Teklogix Clock Radio NP2500 User Manual