Planet Technology DVD Recorder DVR 1671 User Manual

4/16-ch H.264 Digital Video Recorder  
DVR-471 / DVR-1671  
Version: 1.0  
Quick Installation Guide  
 
1. Overview  
This quick installation guide describes the objectives, organization and basic  
installation of the PLANET DVR-471 / DVR-1671 surveillance system, and offers  
standalone system to build a distributed surveillance system, which can be  
monitored via network, and equipped with hard disc drive that records the video  
directly. Also, this guide shows you how to find additional information on related  
products and services.  
 
2. Package Contents  
ó 1 x DVR-471 / DVR-1671  
ó 1 x Power adapter  
ó 1 x Power cord  
ó 1 x Quick installation guide  
ó 1 x User’s manual CD  
ó 2 x SATA cable  
ó 1 x SATA power cable  
ó 4 x HDD rack  
ó 8 x HDD screw  
ó 1 x Remote controller  
ó 2 x Battery  
If any of above items are missed or damaged, please contact your  
local dealer for support.  
Note  
 
3. Rear Panel Description  
Item  
Description  
1
2
3
4
5
6
7
8
VIDEO IN  
SPOT  
BNC input ports for cameras  
BNC output port for spot monitor  
BNC output port for the main monitor  
RCA input port for an audio signal  
RCA output port for an audio signal  
Output port for the VGA monitor  
PS/2 mouse connection port  
VIDEO OUT  
AUDIO IN  
AUDIO OUT  
VGA  
PS/2  
ETHERNET  
Port for 10/100Mbps Ethernet  
Input terminal blocks for alarm signals/  
Terminal blocks of RS-485 / Relay  
output terminal blocks  
9
SENSOR / RS-485 / RELAY OUT  
10  
11  
POWER IN  
Socket for DC 12V power adapter  
Switch to turn the power on/off  
POWER SWITCH  
 
4. HDD Installation  
Step 1:  
Lock HDD holder symmetrically in the two sides of HDD with racks and  
screws.  
Make sure the position between HDD and racks.  
The HDD must be installed before the DVR is turned on.  
Note  
Step 2:  
Insert the SATA cable and power cable into SATA HDD.  
 
Step 3:  
Lock the HDD onto DVR machine.  
Step 4:  
Insert the SATA cables into the sockets on the main board. Make sure the  
HDD1, 2 cables insert into HDD1, 2 sockets.  
Now, the installation was finished  
 
5. Hardware Installation  
1. Connect your cameras to the Video Inputs.  
2. Connect your main monitor to “Video Output” or “VGA” connector.  
3. Connect the “Ethernet” port to your switch / hub via RJ-45 cable.  
4. Connect the bundled power adapter (DC 12V) to the “Power In”  
5. Switch the “Power Switch” to turn on your DVR.  
Further configuration and information can be found in the user’s manual CD. Please  
check the user’s manual for more understanding.  
 

Pelco Home Security System C226M User Manual
Phase Technology Speaker HP690i User Manual
Philips Blender HR2061 User Manual
Philips Blender HR7775 User Manual
Philips CRT Television 13PR 10G User Manual
Philips MP3 Player SA6125 02 User Manual
Pioneer DJ Equipment DJM 250 K User Manual
Polycom Water System DOC2091A User Manual
Power Acoustik Car Amplifier PS1 2000D User Manual
Powermate Portable Generator PM0606750 User Manual