Planar Computer Monitor XP17W User Manual

XP17W  
 
Table of Contents  
Chapter 1 Introduction......................................................................................................1  
1.1 Important Safety Precautions........................................................................................................... 1  
1.2 Important Notices............................................................................................................................ 4  
1.3 Product Functions............................................................................................................................ 4  
1.4 Package Contents ............................................................................................................................ 4  
1.5 Pull down the base........................................................................................................................... 4  
1.6 Set up to LCD-TV........................................................................................................................... 4  
1.7 Viewing Angle Adjustment............................................................................................................. 5  
1.8 Detaching main body from Its Stand............................................................................................... 5  
1.9 Interface for Arm Applications........................................................................................................ 5  
Chapter 2 Installation........................................................................................................6  
2.1 Product Outward ............................................................................................................................. 6  
2.2 System Installation: ......................................................................................................................... 7  
Chapter 3 Operation Instruction.......................................................................................8  
3.1 IR Control ....................................................................................................................................... 8  
3.2 Advanced Setting ............................................................................................................................ 9  
Chapter 4 Technical Information ...................................................................................16  
4.1 Specifications ................................................................................................................................ 16  
4.2 Standard Timing Table.................................................................................................................. 18  
Chapter 5 Other Information..........................................................................................18  
5.1 Specifications ................................................................................................................................ 18  
Chapter 6 Troubleshooting .............................................................................................19  
Chapter 1 Introduction  
Thanks for your purchase of this product. With this product, you can use your computer monitor to watch  
TV/CATV, VCR, LD, and DVD or play video game. Without turning on your computer, the system set up is very  
easy and there is no additional requirement for hardware or software. You don't need to learn a complicated set up  
procedure and you can enjoy your product with just plug and play.  
1.1 Important Safety Precautions  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety.  
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe  
the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong  
the service life of your LCD color TV product, please read the following precautions carefully before using the  
product.  
Read instructions—All operating instructions must be read and understood before the product is operated.  
Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future  
reference.  
Observe warnings—All warnings on the product and in the instructions must be observed closely.  
Follow instructions—All operating instructions must be followed.  
Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments  
can result in accidents.  
Power source—This product must operate on a power source specified on the specification label. If you are not  
sure of the type of power supply used in your home, consult your dealer or local power company. For units  
designed to operate on batteries or another power source, refer to the operating instructions.  
 
1
Power cord protection—The power cords must be routed properly to prevent people from stepping on them or  
objects from resting on them. Check the cords at the plugs and product.  
If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter.  
Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.  
Entering of objects and liquids—Never insert an object into the product through vents or openings. High  
voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the  
same reason, do not spill water or liquid on the product.  
Servicing—Do not attempt to service the product yourself. Removing covers can expose you tohigh voltage and  
other dangerous conditions. Request a qualified service person to perform servicing.  
Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a  
qualified service person to perform repairs.  
a. When the power cord or plug is damaged.  
b. When a liquid was spilled on the product or when objects have fallen into the product.  
c. When the product has been exposed to rain or water.  
d. When the product does not operate properly as described in the operating instructions. Do not touch the  
controls other than those described in the operating instructions. Improper adjustment of controls not  
described in the instructions can cause damage, which often requires extensive adjustment work by a  
qualified technician.  
e. When the product has been dropped or damaged.  
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that  
the product needs servicing.  
Replacement parts—In case the product needs replacement parts, make sure that the service person uses  
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the  
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.  
Safety checks—Upon completion of service or repair work, request the service technician to perform safety  
checks to ensure that the product is in proper operating condition.  
Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a plug having  
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If  
you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,  
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
For use only with AC adapter, Li-shin LSE9901B1260 or Linearity LAD6019AB5.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug.A grounding type plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide  
blade or the blades and a third prong are provided for your safety.If the provided plug does not fit into your  
outlet. consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from  
tip-over.  
 
2
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
15. “WARNING”-To reduce the risk of fire or electric shock, do not expose this apparatus to ran or moisture.  
16. Do not expose this appliance to dripping or splashing. Do not place objects filled with liquids on this appliance.  
17. The Shock Hazard Marking and Associated Graphical Symbole is provided on the bottom panel of unit.  
18. “CAUTION”-These service instructions are for use by qualified service personnel only. To reduce the risk of  
electric shock do not perform any servicing other than that contained in the operating instructions unless you are  
quailed to do so  
1.1.1 FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed  
and used in accordance with the instruction, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Warning  
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for comliance could viold your authority to operate  
the equipment.  
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This  
device may not cause harmful interference. (2) This device must accept and interference received, including  
interference that may cause undesired operation.  
1.1.2 Canadian DOC Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Lamp Disposal  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR  
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE  
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT  
WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK  
WWW.LAMPRECYCLE.ORG.  
 
3
1.2 Important Notices  
Please use the product under a normal environment  
1. Try to avoid the following circumstances.  
* Heat or direct sunlight places  
* Unstable or vibrational places  
* Location with huge magnetic field  
* Exposure to rain or moisture places  
2. For the unauthorized person, please don't serve this product: otherwise the damage caused by  
unauthorized servicing is not covered by warranty.  
3. Unplug this product from AC outlet and remove batteries from IR control, when this product is left  
unused for a long time.  
1.3 Product Functions  
z With the advanced video processing technology, the TV composite VIDEO, S-VIDEO signal can be  
displayed on PC monitor.  
z Double scan conversion (15.75 KHz to 31.5 KHz).  
z With built-in audio loop, the audio signal coming from PC can pass through to PC speakers at any  
circumstance.  
z Full screen, true color display.  
z TV systems: PAL system.  
z Built-in TV tuner for receiving terrestrial or cable TV.  
z Easy operation - With one button to switch signals coming from composite VIDEO, S-VIDEO,  
COMPONENT VIDEO, CABLE/TV or PC.  
z Automatic channel scan to detect the program channels.  
z On screen display operation with IR remote controller.  
z NICAM supported for PAL system.  
1.4 Package Contents  
As you unpack the product, please make sure the following items were included. If any of these items are  
missing, call your local agencies.  
Main body  
Power supply x1  
VGA cable x1  
x1  
Audio cable  
User manual  
AAA batteries x2  
x1  
x1  
IR control  
Power cord  
x1  
x1  
1.5 Pull down the base  
When you open the box to take the product out then  
pull down the base first (See figure 1-1)  
Figure 1-1  
Figure 1-2  
Figure 1-3  
1.6 Set up to LCD-TV  
1. To remove the tuner cover. (See figure 1-2)  
2. To connect the TV tuner. (See figure 1-3)  
 
4
3. To tear off the label. (See figure 1-4)  
Figure 1-4  
1.7 Viewing Angle Adjustment  
This product is designed to allow users to have a  
comfortable viewing angle. The viewing angle can  
be adjusted from -5°to +25°. (See Figure 1-5).  
Figure 1-5  
When you want to close the base and body to 90°, you need  
to release a button from 25°. (See fig. 1-6)  
Figure 1-6  
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this  
will result in damaging the Monitor and Monitor stand.  
1.8 Detaching main body from Its Stand  
1. Remove the rear cover from neck n (See  
Figure 1-7)  
2. Unscrew screws of the hinge bracket o  
3. Remove the stand from main body p  
Figure 1-7  
1.9 Interface for Arm Applications  
Before installing to mounting device, please refer  
to Fig.1-8  
The rear of this LCD display has four integrated 4  
mm, 0.7 pitches threaded nuts, as well as four 5  
mm access holes in the plastic covering as  
illustrated in Figure 1-8. These specifications meet  
the VESA Flat Panel Monitor Physical Mounting  
Interface Standard (paragraphs 2.1 and 2.1.3,  
version 1, dated 13 November 1997).  
Figure 1-8  
Note :Please using Ø 4mm x 8mm (L) screw for this application.  
 
5
Chapter 2 Installation  
2.1 Product Outward  
2.1.1 Front view of main body  
Figure 2-1  
Figure 2-2  
LED lights Green color --- Power is ON.  
LED lights Orange --- Monitor is in "Power Saving Mode".  
LED is off --- Power is OFF.  
Indicator for  
Power  
1
IR receiver.  
2
3
IR receiver  
Power  
Turn on or off the main body.  
Open the OSD menu.  
4
5
Menu  
Select the next lower channel / higher channel (TV/AV mode) ; OSD  
function for selecting (PC mode).  
Channel  
Lower / Raise the sound volume (TV/AV mode) ; OSD function for  
adjusting (PC mode).  
Selection CABLE/TV, AV2/Y PB PR, AV1/AV, AV1/SV or PC and  
off OSD menu.  
6
7
Volume  
Source  
2.1.2 Rear view of main body  
Figure 2-3  
Please connect to antenna or cable TV signal.  
Please use the 15-pin VGA cable in the package contents.  
For component Video input and audio.  
1
2
3
4
5
6
7
RF in  
VGA input  
AV2-in  
For composite video or S-video input and audio.  
Please connect the audio from sound card to PHONE IN.  
Please connect to your 12V power supply.  
AV1-in  
Phone in  
DC in  
It can be locked with Kensington lock.  
Kensington Lock hole  
 
6
2.2 System Installation:  
Please refer to the example closest to your configuration  
Please turn off the power of all devices before connection. For audio connection, please use RCA audio  
(L+R) connector. For video connection, please choose either RCA video connector or s-video connector.  
Moreover, for connection to monitor alone please omit those connections associated with PC.  
 
7
Chapter 3 Operation Instruction  
3.1 IR Control  
4:3 / 16:9  
POWER  
Switch between power-on and  
power-off.  
Select the screen scale.  
MUTE  
OK  
Turn the sound on/off.  
MPX  
Enter.  
Select the sound output  
Adjust the selected item on menu  
or adjust the volume.  
VOLUME  
Adjust the volume.  
* Press to select desired item on the  
menu  
* Press to select desired page on the  
text mode  
CHANNEL  
DISPLAY  
Select channels up or down.  
Show the information on screen.  
0~9 Number Keys  
TV/AV1/AV2/PC  
Select input sources of TV,  
AV1.AV1/SV,  
Used to select cable TV or  
Terrestrial programs.  
AV2/AV.AV2/S-V  
and PC.  
SLEEP  
MENU  
Turn on the OSD menu.  
Select timer to turn power off. The  
default timer is 10, 20, 30, 40, 50,  
60, and 90 minutes (Only enable in  
TV function).  
LAST CH  
EXIT  
Quit the OSD page menu  
Turn back the last select channel.  
 
8
3.2 Advanced Setting  
3.2.1 TV settings  
The OSD shown below displays when you press "MENU" (on main body) or "  
button. You can see four options shown as below.  
" (on remote control)  
PICTURE: CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, HUE .  
AUDIO: VOLUME, MUTE, BALANCE, TREBLE, BASS.  
RESET: LANGUAGE, RECALL.  
SETUP: MTS, AIR/CATV, CHANNEL, CH. Memory, AUTO SEARCH.  
CLOSED CAPTION: CLOSED CAPTION MODE  
PROTECTION: LOCK TV RATING MPAA RATING CHANGE PIN  
MAIN MENU  
PICTURE  
Press "MENU" (on main body)select ", " (on remote  
control) button to PICTURE then press OK to enter.  
AUDIO  
Press "MENU" (on main body)select ", " (on remote  
control) button to AUDIO then press OK to enter.  
RESET  
Press "MENU" (on main body)select ", " (on remote  
control) button to RESET then press OK to enter.  
SETUP  
Press "MENU" (on main body)select ", " (on remote  
control) button to SETUP then press OK to enter.  
CLOSED CAPTION  
Press "MENU" (on main body)select ", " (on remote  
control) button to CLOSEDCAPTION then press OK to  
enter.  
PROTECTION  
Press "MENU" (on main body)select ", " (on remote  
control) button to PROTECTION then press OK to enter.  
 
9
PICTURE  
CONTRAST  
Press "  
" (on main body) or ", " (on remote control)  
button to increase or decrease the screen  
display.  
BRIGHTNESS  
Press "  
" (on main body) or ", " (on remote control)  
button to increase or decrease the screen brightness.  
COLOR  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust the contrast for soft or saturation.  
SHARPNESS  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust the contrast for soft or sharpness.  
HUE  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust for NTSC system color change if PAL system  
it is no function.  
AUDIO  
VOLUME  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the volume.  
BALANCE  
Adjust the speaker balance on Left/Right by pressing "  
"
(on main body) or ", " (on remote control) button.  
MUTE  
Select the speaker mute on /off by pressing "  
" (on main  
body) or ", " (on remote control) button.  
TREBLE  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the treble  
BASS  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the bass  
 
10  
RESET  
LANGUAGE  
Press "  
" (on main body) or ", " (on remote  
control) button to select the LANGUAGE.  
RECALL  
Press "  
" (on main body) or ", " (on remote  
control) button to RECALL, the recall function will  
return all adjusted parameters to factory preset  
values.  
SETUP  
MTS  
Press "  
" (on main body) or ", " (on remote  
control) button to select the AUDIO SYSTEM.  
AIR/CATV  
Press "  
" (on main body) or ", " (on remote  
control) button to select the AIR or CATV SYSTEM.  
CHANNEL  
Press "  
" (on main body) or ", " (on remote  
control) button to select the CHANNEL NUMBER.  
CH. Memory  
Press "  
" (on main body) or ", " (on remote  
control) button to select the YES or NO.  
AUTO SEARCH  
Press OK to start / stop AUTO SEARCH channel .  
 
11  
CLOSED CAPTION  
CLOSED CAPTION  
1.Press "  
" (on main body) or ", " (on remote  
control) button to select the CLOSED CAPTION NO or  
YES.  
2. Press "  
" (on main body) or ", " (on remote  
control) button to select the MODE for CC SYSTEM.  
PROTECTION  
PROTECTION  
1. Press "  
" (on main body) or ", " (on  
remote control) button to select the lock and TV  
ration and MPAA ration for OFF or ON.  
2. Press remote control select the CHANGE PIN for  
modify four PIN number.  
PIN  
Press remote control four number key 0000.  
3.2.2 AV settings  
The OSD shown below displays when you press "MENU" (on main body) or “  
button. You can see four options shown as below.  
” (on remote control)  
PICTURE: CONTRAST, BRIGHTNESS, COLOR, SATURATION, HUE.  
AUDIO: VOLUME, BALANCE, MUTE, TREBLE and BASS.  
RESET: LANGUAGE, RECALL.  
MAIN MENU  
PICTURE  
Press "MENU" (on main body)select ", " (on remote  
control) button to PICTURE then press OK to enter.  
AUDIO  
Press "MENU" (on main body)select ", " (on remote  
control) button to AUDIO then press OK to enter.  
 
12  
RESET  
Press "MENU" (on main body)select ", " (on remote  
control) button to RESET then press OK to enter.  
PICTURE  
CONTRAST  
Press "  
" (on main body) or ", " (on remote control)  
button to increase or decrease the screen  
display.  
BRIGHTNESS  
Press "  
" (on main body) or ", " (on remote control)  
button to increase or decrease the screen brightness.  
COLOR  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust the contrast for soft or saturation.  
SHARPNESS  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust the contrast for soft or sharpness.  
HUE  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust the contrast for soft or hue.  
AUDIO  
VOLUME  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the volume.  
BALANCE  
Adjust the speaker balance on Left/Right by pressing "  
"
(on main body) or ", " (on remote control) button.  
MUTE  
Adjust the speaker mute on /off by pressing "  
" (on main  
body) or ", " (on remote control) button.  
TRABLE  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the treble  
 
13  
BASS  
Press "  
" (on main body) or ", " (on remote control)  
button to adjust lower or raise the bass  
RESET  
LANGUAGE  
Press "  
" (on main body) or ", " (on remote  
control) button to select the LANGUAGE.  
RECALL  
Press "  
" (on main body) or ", " (on remote  
control) button to RECALL, the recall function will  
return all adjusted parameters to factory preset  
values.  
3.2.3 PC settings  
The OSD shown below displays when you press "MENU"(on main body and remote control).  
To adjust the picture brightness.  
1.Press " " (on main body) or ", " (on remote control) button to  
select item.  
2.Then press "  
" (on main body) or ", " (on remote control)  
button to adjust brightness.  
To adjust the color temperature.  
1.Press "  
" (on main body) or ", " (on remote control) button to  
select item.  
2.When you choose the user mode in color temperature, then press  
"MENU" (on main body and remote control) to enter second page to  
adjust the R, G, B.  
3.After finishing adjustment to press “ENTER” (on main body and  
remote control) retune to main menu.  
 
14  
3.2.4 PC OSD function description  
Icon Function  
BRIGHTNESS  
Function Description  
This function increases or decreases the brightness of the image.  
This function increases or decreases the difference between the dark and light  
color.  
CONTRAST  
This function shifts the entire display image left or right.  
This function shifts the entire display image up or down.  
H-POSITION  
V-POSITION  
AUTO  
ADJUSTMENT  
This function will adjust the display size automatically to fit full screen.  
This function is available to adjust the focus and clarity of the display.  
PHASE  
This function carries a frequency-tracking feature that offers the user to have  
better stability and clarity. Increasing Clock value can be up to +50 scales.  
The number of decreasing Clock (minus) is depending on the input timing.  
CLOCK  
This function moves the OSD menu window left or right.  
This function moves the OSD menu window up or down.  
OSD H-POSITION  
OSD V-POSITION  
This function is to choose a display that allows maximum graphics text  
quality. The resolution selection can either be 640 x 400 or 720 x 400. Please  
refer to Chapter 3 “ Standard Timing” Table for of different timing modes.  
GRAPH TEXT  
The recall function will return all adjusted parameters to factory preset  
values.  
RECALL  
Three OSD languages options are available:  
English, Japanese, Traditional Chinese..  
LANGUAGE  
To select a different color temperature. Please see the diagram below for  
function and description.  
TEMPERATURE  
EXIT  
Exit the OSD menu function.  
Icon  
Description  
Set CIE coordinated at 9300°K color temperature.  
9300  
6500  
USER  
Set CIE coordinated at 6500°K color temperature.  
There are 3 colors (Red, Green, Blue) for user to adjust from OSD menu.  
Adjust Red color on screen.  
Adjust Green color on screen.  
Adjust Blue color on screen.  
R
G
B
 
15  
Chapter 4 Technical Information  
4.1 Specifications  
LCD Panel  
Size  
17" (43 cm)  
Display Type  
Resolution  
Active matrix color TFT LCD  
1280 x 768  
Display Dot  
Display Area (mm)  
Display Color  
Brightness  
Contrast Ratio  
Response Time  
Lamp Voltage  
Lamp Current  
Viewing Angle  
1280 x (RGB) x 768  
369.6 x 221.7 (H x V)  
16.2M  
450 cd/m2 (typical)  
600:1 (typical)  
Ta=25°C T on=15ms T off=10ms  
630 Vrms (typical)  
10.5 mA rms. (typical)  
Vertical: -85° ~ +85°  
Horizontal: -85° ~ +85°  
16.2M with FRC or Dithering  
Display colors  
Video  
Input Signal  
Input Impedance  
Polarity  
Analog RGB 0.7Vp-p  
75 Ohm ± 2%  
Positive, Negative  
Amplitude  
0 - 0.7 ± 0.05 Vp  
Multi-mode Supported  
Horizontal Frequency: 30 ~ 60 KHz  
Vertical Frequency: 50 ~ 75 Hz  
2.5W, 4.5 OHM  
Speaker  
Control  
Power switch (hard and soft types) On/Off switch with LED indicator  
OSD  
Brightness  
Digital  
Contrast  
Digital  
Horizontal Position  
Vertical Position  
Phase  
Digital  
Digital  
Digital  
Clock  
Digital  
Display Mode Setup  
OSD Format  
Use EEPROM to save settings in memory  
20 characters x 9 rows  
Power Management  
Mode  
On  
Off  
Power Consumption*  
AC Input  
240 VAC  
240 VAC  
240 VAC  
LED Color  
Green  
Orange  
75W maximum  
5W maximum  
5W maximum  
Soft switch off  
Dark  
Orange: Standby, Suspend, Off  
Dark: DC Power off  
Disconnected  
5W maximum  
240 VAC  
* Meeting VESA DPMS requirements measured from AC Input end of AC power cord.  
 
16  
Sync Input  
Signal  
Polarity  
Separate TTL compatible horizontal and vertical synchronization  
Positive and negative  
Supports VESA DDC1 and DDC2B functions  
Plug & Play  
External Connection  
Power Input (AC input)  
Video Cable  
AC socket  
1.5M with 15-pin D-sub connector  
1.5M with Stereo Jack  
Audio Cable  
Environment  
Operating Condition:  
Temperature  
Relative Humidity  
5°C to 35°C/41°F to 95°F  
20% to 85%  
Temperature  
Relative Humidity  
-20°C to 60° C/-4°F to140° F  
5% to 85%  
Storage Condition:  
Power Supply (AC Input)  
Input Voltage  
Input Current  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
1.2 A maximum  
Pin Assignment  
6
Signal  
Signal  
PIN  
Description  
PIN  
Description  
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
NC  
Digital GND  
Red Rtn  
Green Rtn  
Blue Rtn  
9
+5V  
Hot Plug Detect  
NC  
11  
10  
11  
12  
13  
14  
15  
1
SDA  
H. Sync.  
V. Sync.  
SCL  
15  
5
10  
 
17  
4.2 Standard Timing Table  
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available  
timing.  
Nominal  
Frequency  
(KHz)  
Sync  
Polarity  
Nominal  
Freq.  
(Hz)  
Sync  
Polarity  
Nominal  
Pixel  
Clock  
Mode  
Resolution  
Total  
(MHz)  
Horizontal  
Vertical  
VESA MODES  
31.469  
640x480@60Hz  
640x480@72Hz  
640x480@75Hz  
800x600@56Hz  
800x600@60Hz  
800x600@72Hz  
800x600@75Hz  
1024x768@60Hz  
1024x768@70Hz  
1024x768@75Hz  
1280x768@75Hz  
800 x 525  
832 x 520  
840 x 500  
1024 x 625  
1056 x 628  
1040 x 666  
1056x625  
1344x806  
1328x806  
1312x800  
1696x805  
N
N
N
N/P  
P
P
P
N
N
P
59.940  
72.809  
75.00  
N
N
N
N/P  
P
P
P
N
N
P
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
102.250  
VGA  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
74.893  
SVGA  
XGA  
60.023  
60.289  
N
P
IBM MODES  
31.469  
DOS*  
DOS  
720x400@70Hz  
640x350@70Hz  
900 x 449  
800 x 449  
N
P
70.087  
70.087  
P
N
28.322  
25.175  
31.469  
Note: When the in put display mode is not 1280 x 768, the image is smoothly expanded to 1280 x 768 dots with the  
scaling engine. After expansion from 650x350, 640x400, 640x480, 720x400, 832x624, 800x600, and 1024x768  
resolution, the text may look not so sharp, and the Graphics may look not so proportional.  
Chapter 5 Other Information  
5.1 Specifications  
POWER IN  
12VDC 5A  
VIDEO INPUT  
S-VIDEO INPUT  
AUDIO INPUT  
PHONE IN  
Composite /Component video RCA connector  
S-Video 4-pin mini DIN  
Stereo L+R RCA connectors  
Phone Jack 3.5  
RF IN  
IEC-Female connector for PAL System  
D-Sub 15 pin connector  
75W maximum  
5 ~ 35°C  
5% ~ 80%  
35 Buttons (AAA batteries x2)  
518 (W) x 333 (H) x 198 (D) mm  
5 ± 0.3 kg  
VGA INPUT  
Power Consumption  
Operating Temperature  
Operating Humidity  
IR Control  
Dimensions  
Net Weight  
Gross Weight  
6.8 ± 0.3 kg  
 
18  
Chapter 6 Troubleshooting  
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing  
differences among various VGA cards in the market, users may initially experience an unstable or unclear  
display whenever a new display mode or new VGA card is selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes.  
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.  
PROBLEM Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps :  
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.  
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the  
“Clock” function in OSD menu and adjust (by increment or decrement numbers) until those bars  
disappear.  
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.  
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.  
PROBLEM There is no picture on LCD Monitor  
If there’s no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is  
running on the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment  
Control button several times.  
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions  
properly with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the  
VGA card may be out of the LCD’s synchronous range. Please change to an alternative mode listed in  
the Standard Timing Table or replace the VGA card, and then repeat steps 1 and 2.  
PROBLEM There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30  
~ 60 KHz and Vertical: 50 ~ 75 Hz), the OSD will display a “Over Range” message. Choose a mode that is  
supported by your LCD Monitor.  
PROBLEM The IR control can't control product  
Make sure if batteries installed are not weak batteries  
If you still have difficulties that you can't resolve using the tips described above, please unplug and plug in  
the AC cord to reset your product. Otherwise, please call your local agency for servicing.  
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a  
message “No Signal ”.  
 
19  
Planar Systems, Inc.  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Customer Service  
Tel : 1-866-PLANAR1 (1-866-752-6271)  
Hours : M-F, 8am-8pm Eastern Time (5am - 5pm Pacific Time)  
© 2005 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names  
are the property of their respective owners. Technical information in this document is subject to change without  
notice.  
11/2005  
HDPNRV6700I  
 

Pella Door V981553 User Manual
Phase Technology Speaker CM82 EZ User Manual
Philips Bottle Warmer SCF125 11 User Manual
Philips Car Video System BDL4230ET User Manual
Philips DVD Player DVD616K User Manual
Philips Switch SWV2053W User Manual
Philips Universal Remote Remote Controls User Manual
Polaris Offroad Vehicle 2005 Sportsman 800 EFI User Manual
Printek Printer FormsPro 4300 User Manual
PVI Industries Water Heater Gas Fired Water Heater User Manual