Pitco Frialator Pasta Maker Compact Pasta Control User Manual

IMPORTANT FOR FUTURE REFERENCE  
Please complete this information and retain this manual  
for the life of the equipment:  
Model #: __________________________  
Serial #: __________________________  
Date Purchased: ___________________  
Operations Manual  
Covering  
Compact Pasta Control  
Pitco p/n 60143701  
L20-269 Rev 0  
11/04  
 
Pitco Compact Pasta Control  
60143701  
1
Keypad and Display Functions:  
2
Operation:  
2.1  
To Turn Control ON:  
When power is applied to the appliance, display will show [OFF]. Press the [ON/OFF] key. Display  
will show one of three possible displays depending on the water temperature; [bOIL], [Sim], or [__°F].  
2.2  
To Turn Control OFF:  
With display showing [bOIL], [Sim], or [__°F], press and hold the [ON/OFF] key. Display will show  
[OFF].  
2.3  
To Start a Cook:  
Press a timer key (1-4) to start a cook timer in this group.  
To activate a timer in the 5-8 group, press the [P] key first, then a timer key.  
Multiple timers may run together, but only one timer for a key. The shortest time  
running will display in minutes and seconds format [MM:SS] with a flashing cook  
indicator.  
2.4  
To Cancel a Cook:  
Press and hold the timer key until the cook indicator light above the key is off.  
2.5  
To Change from Boil to Simmer, or, Simmer to Boil:  
With display showing [bOIL], or [Sim], momentarily press the  
[ON/OFF] key . Display will change to the alternate setting.  
L20-269 Rev 0  
Pg. 3 of 5  
 
Pitco Compact Pasta Control  
60143701  
3
Programming:  
To enter the programming menu, press the [P] key for 3 seconds. Display will show one of two possible  
displays; [Pr--] for Program entry or [Loc] for locked entry.  
3.1  
To Unlock  
If control is displaying [Pr--] skip this step. While display  
is showing [Loc], press the Down arrow key once followed  
by the Up arrow key. Display will show [Pr--]. Control is  
now unlocked ready for programming.  
3.2  
To Change Simmer Temperature  
With display showing [PR--]. Press the [P] key, display will show [tEnP]. Press the  
down arrow key to display the current simmer temperature setting as [xxxF], or  
[xxxC]. To change this setting, use the Up and Down arrow keys to adjust temperature. Press the [P] key to  
save value. Display will show [tEnP]. Continue to the next step.  
3.3  
To Change Timers 1-4:  
3.3.1  
With display showing [tEnP], press the [P] key once. Display will show  
[1234] to indicate that timers 1 through 4 may be selected.  
Press the timer key needing adjustment. The indictor above that key will  
illuminate, and the display will show the current timer setting for this key  
in minutes and seconds format [MM:ss].  
3.3.2  
3.3.3  
Use the Up and Down arrow keys to adjust timer setting, then press the [P] key to save value for this  
key.  
3.3.4  
3.3.5  
Display returns to [1234]. Repeat from step 3.3.2 for other timer keys in this group.  
When all keys in this group are set, press the [P] key to continue.  
3.4  
To Change Timers 5-8:  
3.4.1  
Display will show [5678] to indicate that timers 5 through 8 may be  
selected.  
3.4.2  
Press the timer key needing adjustment. The indictor above that key will  
illuminate, and the display will show the current timer setting for this key  
in minutes and seconds format [MM:ss].  
3.4.3  
3.4.4  
3.4.5  
Use the Up and Down arrow keys to adjust timer setting, then press the [P] key to save value for this key.  
Display returns to [5678]. Repeat from step 3.4.2 for other timer keys in this group.  
When all keys in this group are set, press the [P] key to exit programming to normal operations.  
L20-269 Rev 0  
Pg. 4 of 5  
 
Pitco Compact Pasta Control  
60143701  
4
Other Displays:-  
4.1  
Low Vat Temperature:  
When tank temperature is below 150°F (65°C), the display will show as  
blanks. This is normal for cold start-ups. Heat Demand indicator is  
located between the first and second digits of display.  
4.2  
Drain Valve Open:  
When drain valve is detected open, normal  
operations are suspended. The display will show  
Drain-Turn-Off message until reset. To reset,  
CLOSE the drain valve, turn the control OFF, then  
ON. Note: some applications do not use the drain  
valve input.  
4.3  
Equipment Fault Displays  
This control will detect faulty probe conditions. If temperature probe faults are detected, display  
will show one of two possible conditions. All other functions are disabled. To reset, turn control  
OFF, then ON.  
L20-269 Rev 0  
Pg. 5 of 5  
 

Pelco Video Game Keyboard C581M B User Manual
Pentax Digital Camera 10874 User Manual
Philips Digital Camera SPC610NC User Manual
Philips DVD Recorder DVR2008 User Manual
Philips Home Theater System 19MD357B 37 User Manual
Philips Stereo Amplifier TDA6106Q User Manual
Plantronics Video Game Headset CA12CD S User Manual
Polk Audio Home Theater System BM1125 A User Manual
Polycom Server 3150 16966 002 User Manual
Powermate Portable Generator PMC435001 User Manual