Backpack Vacuum
OPERATING INSTRUCTIONS
COMMERCIAL AND HOUSEHOLD
BACKPACK VACUUM CLEANERS
CONGRATULATIONS
YOU HAVE JUST ACQUIRED A HIGH QUALITY VACUUM
CLEANER. PLEASE READ THIS MANUAL CAREFULLY,
BEFORE OPERATING YOUR NEW VACUUM CLEANER.
KEEP MANUAL ON HAND FOR FURTHER REFERENCES.
Save These Instructions
BP300 2/2004
OPERATION INSTRUCTIONS
Please read the following operating instructions carefully. They will help
you to get the best performance from this professional quality vacuum
cleaner and to maintain it in optimum condition.
Turn off main power
switch and unplug unit
from wall outlet.
Follow these simple steps for easy and effective
operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is correctly located and the
flexible ring provides a proper seal when the lid is closed. For optimum
filtration and maximum hygiene, it is advisable to use a paper vacuum
bag in addition to the standard cloth bag.
Remove vacuum hose
from top of unit.
If you use a paper vacuum bag, simply insert it into the cloth bag, making
sure that the cardboard disk is centered on the flexible sealing ring.
When you replace the lid, the short nozzle in the center of the lid will be
forced into the central hole of the cardboard disk of the paper vacuum
bag thus providing a tight seal. Make sure the paper vacuum bag is tight-
ly secured over the short nozzle before vacuuming.
Lock the lid down with the two latches. Always ensure that the vacuum
bag is empty before vacuuming. Your Backpack vacuum has been fitted
with a thermal overload switch to protect the motor against damage
should the airflow be blocked for extended periods. This may occur if the
vacuum bag is overfull or if the vacuum hose is blocked. The vacuum
motor will stop before it can get too hot. If this happens, empty and thor-
oughly clean the vacuum bag or free any blockage and ensure that ade-
quate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
Release the two
latches and lift off lid.
1. The vacuum hose is fitted into the cuff in the lid. It should not
be necessary to remove the hose in normal operation.
2. Place the Backpack vacuum on your back, adjust the shoulder straps
until you feel comfortable and then tighten the waist belt. The
Backpack vacuum is designed to ride higher on your back for
maximum comfort.
Separate lid from paper
bag insert and dispose
of paper bag.
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power
cord in good condition. This unit ships with a 50' 16AWG x 3 conductor
SJT extension cord. Always use a 16x3 SJT extension cord when
operation this unit.Use care when pulling the cord around sharp
edges and through doorways
Remove cloth filter bag,
clean, dust and replace.
Never operate the Backpack vacuum if the
power cord is damaged in any way.
4. Attach the extension wand to the hose and fit the floor tool or
any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The toggle switch is located on the switch box.
You may clip the switch box to the waist belt.
Insert new paper bag
making sure to align lid
nozzle with bag hole and
replace latches.
Model Parts
ref # item #
description
1
A328-1400 THERMAL PROTECTION SWITCH
A352-3300 LATCH
27
6
18
19
2
3
4
5
6
A352-8100 #10 .750 TYPE B PHILIPS PAN HEAD SCREW
A352-8200 #6 X .375 HI-LO PHILIPS PAN HEAD SCREW
A430-0205 #8-16 X 2.500 PHILIPS PAN HEAD SCREW
A732-8300 #8 X .625 HI-LO PHILIPS PAN HEAD SCREW
B352-1300 BACK REST
28
7
8
9
B352-2400 POST FILTER
B352-2500 PAPER BAG
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
B352-3200 POWER HARNESS
B352-6100 BAG COMPARTMENT SEAL
B352-600
HEYCO FITTING
39
17
B352-6800-NUT HEYO FITTING NUT
B352-0100 MOTOR COMPARTMENT
B352-0200 BUMPER
B352-0300 FRONT PLATE
B352-0400 BACK PLATE
B352-0500 COVER
B352-0600 HOSE INLET
B352-0700 MOTOR COVER
B352-0800 SECONDARY FILTER PLATE
B352-0900 SECONDARY FILTER FRAME
B352-1000 SECONDARY FILTER CAP
B352-1100 POST FILTER FRAME
B352-1200 BODY SEAL
B352-1900 BOTTOM MOTOR MOUNT
B352-4800 INLET SEAL
2
40
34
11
16
23
33
32
6
22
3
7
5
C352-1400 SHAKE OUT BAG
25
C352-2800 SWITCH HARNESS
A113-2600 5.1" SINGLE STAGE TEK MOTOR
B113-0915 TEK MOTOR SHROUD PC
B352-5800 SHOULDER HARNESS STRAP
B352-6600 WAIST BELT
B352-6700 SHOULDER STRAP BUCKLE
B352-1800 TOP MOTOR MOUNT
B352-5300 MOTOR SHROUD BOTTOM 5.1 - 1 STAGE
B352-5400 MOTOR SHROUD TOP 5.1 - 1 STAGE
B352-5500 MOTOR SEAL
21
37
20
35
38
30
31
6
36
B352-5600 RIGHT SHOULDER HARNESS
B352-5700 LEFT SHOULDER HARNESS
4
1
26
NOT ILLUSTRATED
B352-3600 CREVISE TOOL
29
B352-3500 UPHOLSTRY TOOL
14
15
B352-3700 DUST BRUSH TOOL BODY
B352-3800 DUST BRUSH BRISTLES
B352-4200 CARPET TOOL BODY
B352-4300 CARPET TOOL BUMPER
B352-4500 BARE FLOOR TOOL BODY
B352-4600 BARE FLOOR TOLL BRUSH
A352-3400 HOSE
6
8
12 13
10
24
B352-3900 TELESCOP WAND
A134-0441 50' EXTENSION CORD 16-3 SJT YELLOW
The Limited Warranty
The manufacturer warrants to the original purchaser that products manufactured are free from defects, provided such goods are
installed, operated and maintained in accordance with written manuals or other instructions for a period of 1 year from date of pur-
chase on workmanship, motor, and parts. In case you, as our customer, meet any trouble with your machine, contact a representa-
tive, who will be happy to be of service to you and will take care of any warranty issues.
|