Philips Telephone CD150 User Manual

Register your product and get support at  
CD 150  
Telephone  
!
Warning  
Use only rechargeable batteries.  
Charge the handset for 24 hours before use.  
 
Table of contents  
1
Safety information  
3
4.3  
4.4  
Install your phone  
Menu structure  
14  
16  
1.1  
Equipment Approval  
Information  
3
4
5
Using your phone  
Make a call  
18  
18  
19  
19  
1.2  
1.3  
Interference Information  
5.1  
5.2  
5.3  
Hearing Aid Compatibility  
(HAC)  
5
5
Answer a call  
End a call  
1.4  
FCC RF Radiation Exposure  
Statement  
6
Use more of your phone 20  
2
Important  
6
6
7
6.1  
6.2  
6.3  
6.4  
6.5  
6.6  
6.7  
6.8  
6.9  
Switch the handset on/off  
Keypad lock/unlock  
Text or number entry  
Call in progress  
20  
20  
20  
20  
21  
23  
23  
25  
26  
2.1  
2.2  
2.3  
Power requirements  
Conformity  
Electric, Magnetic and  
Electromagnetic Fields ("EMF") 7  
2.4  
2.5  
Recycle your batteries  
Service Centers  
7
8
Using your phonebook  
Using the redial list  
Using the call log  
3
Your phone  
9
9
3.1  
3.2  
3.3  
3.4  
What’s in the box  
Overview of your phone  
Display icons  
Using the intercom  
Handset locating  
10  
12  
7
Personal settings  
Change the handset name  
Handset Tones  
27  
27  
27  
Overview of the base station 12  
7.1  
4
Getting started  
13 7.2  
4.1  
4.2  
Connect the base station  
Wall mounting the base  
13  
13  
7.3  
7.4  
Change the display language 28  
Activate/deactivate auto  
hang-up  
28  
Table of contents  
1
 
Table of contents  
8
Clock and Alarm  
Set date and time  
Set date/time format  
Set alarm  
29  
29  
29  
29  
30  
8.1  
8.2  
8.3  
8.4  
Set alarm tone  
9
Advanced settings  
Change Master PIN  
Registration  
31  
31  
31  
31  
32  
32  
32  
33  
33  
33  
34  
9.1  
9.2  
9.3  
9.4  
9.5  
9.6  
9.7  
9.8  
9.9  
Unregister  
Reset unit  
Set area code  
Set prefix  
Change flash time  
Change the dial mode  
Set first ring  
9.10 Default settings  
10  
11  
Technical data  
35  
Frequently asked  
questions  
36  
38  
12  
Index  
2
Table of contents  
 
plug is provided with this product. It is  
designed to be connected to a compatible  
modular jack that is also compliant. See  
installation instructions for details.  
Notes  
1
Safety information  
1.1  
Equipment Approval  
Information  
This equipment may not be used on  
coin service provided by the telephone  
company.  
Your telephone equipment is approved  
for connection to the Public Switched  
Telephone Network and is in compliance  
with parts 15 and 68, FCC Rules and  
Regulations and the Technical  
Party lines are subject to state tariffs,  
and therefore, you may not be able to  
use your own telephone equipment if  
you are on a party line. Check with  
your local telephone company.  
Notice must be given to the telephone  
company upon permanent  
disconnection of your telephone from  
your line.  
If your home has specially wired alarm  
equipment connected to the  
Requirements for Telephone Terminal  
Equipment published by ACTA.  
1.1.1 Notification to the Local  
Telephone Company  
On the bottom of this equipment is a  
label indicating, among other information,  
the US number and Ringer Equivalence  
Number (REN) for the equipment. You  
must, upon request, provide this  
information to your telephone company.  
The REN is useful in determining the  
number of devices you may connect to  
your telephone line and still have all of  
these devices ring when your telephone  
number is called. In most (but not all)  
areas, the sum of the RENs of all devices  
connected to one line should not exceed  
5. To be certain of the number of devices  
you may connect to your line as  
telephone line, ensure the installation  
of this product does not disable your  
alarm equipment. If you have questions  
about what will disable alarm  
equipment, consult your telephone  
company or a qualified installer.  
US Number is located on the cabinet  
bottom.  
REN Number is located on the cabinet  
bottom.  
1.1.2 Rights of the Telephone  
Company  
determined by the REN, you should  
contact your local telephone company.  
A plug and jack used to connect this  
equipment to the premises wiring and  
telephone network must comply with the  
applicable FCC Part 68 rules and  
Should your equipment cause trouble on  
your line which may harm the telephone  
network, the telephone company shall,  
where practicable, notify you that  
temporary discontinuance of service may  
be required. Where prior notice is not  
practicable and the circumstances  
requirements adopted by the ACTA. A  
compliant telephone cord and modular  
Safety information  
3
 
warrant such action, the telephone  
company may temporarily discontinue  
service immediately. In case of such  
temporary discontinuance, the telephone  
company must: (1) promptly notify you of  
such temporarydiscontinuance; (2) afford  
you the opportunity to correct the  
situation; and (3) inform you of your right  
to bring a complaint to the Commission  
pursuant to procedures set forth in  
Subpart E of Part 68, FCC Rules and  
Regulations.  
The telephone company may make  
changes in its communications facilities,  
equipment, operations or procedures  
where such action is required in the  
operation of its business and not  
inconsistent with FCC Rules and  
Regulations. If these changes are  
expected to affect the use or  
interference by one or more of the  
following measures: Reorient the radio/  
television receivers antenna, relocate  
the equipment with respect to the  
receiver, plug the equipment and receiver  
into separate circuit outlets. The user  
may also wish to consult a qualified radio/  
television technician for additional  
suggestions. This equipment has been  
fully tested and complies with all limits for  
Class B computing devices pursuant to  
part 15 FCC Rules and Regulations. This  
device complies with RSS-210 of Industry  
Canada. Operation is subject to the  
following two conditions: (1) This device  
may not cause interference, and (2) This  
device must accept any interference,  
including interference that may cause  
undesired operation of the device.  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions:  
performance of your telephone  
equipment, the telephone company must  
give you adequate notice, in writing, to  
allow you to maintain uninterrupted  
service.  
(1) This device may not cause harmful  
interference; and (2) This device must  
accept any interference received,  
including interference that may cause  
undesired operation.  
1.2  
Interference Information  
This equipment has been tested and  
found to comply with the limits for a  
Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are  
designed to provide reasonable  
protection against harmful interference in  
a residential installation.  
This equipment generates, uses, and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful  
This equipment generates and uses radio  
frequency energy which may interfere  
with residential radio and television  
reception if not properly installed and  
used in accordance with instructions  
contained in this manual. Reasonable  
protection against such interference is  
ensured, although there is no guarantee  
this will not occur in a given installation. If  
interference is suspected and verified by  
switching this equipment on and off, the  
user is encouraged to try to correct the  
interference to radio communications.  
4
Safety information  
 
However, there is no guarantee that  
interference will not occur in a particular  
installation.  
Notice: The changes or modifications not  
expressly approved by the party  
responsible for compliance could void the  
user's authority to operate the  
equipment.  
Privacy of Communications may not be  
ensured when using this product.  
If this equipment does cause harmful  
interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the  
following measures:  
1.3  
Hearing Aid Compatibility  
(HAC)  
This telephone system meets FCC/  
Industry Canada standards for Hearing  
Aid Compatibility.  
Reorient or relocate the receiving  
antenna (that is, the antenna for radio  
or television that is receivingthe  
interference).  
Reorient or relocate and increase the  
separation between the  
telecommunications equipment and  
receiving antenna.  
Connect the telecommunications  
equipment into an outlet on a circuit  
different from that to which the  
receiving antenna is connected.  
1.4  
FCC RF Radiation Exposure  
Statement  
This equipment complies with FCC RF  
radiation exposure limits set forth for an  
uncontrolled environment. This  
equipment should be installed and  
operated with a minimum distance of 20  
centimeters between the radiator and  
your body. This transmitter must not be  
co-located or operated in conjunction  
with any other antenna or transmitter.  
For body worn operation, this phone has  
been tested and meets the FCC RF  
exposure guidelines when used with the  
belt clip supplied with this product. Use of  
other accessories may not ensure  
compliance with FCC RF exposure  
guidelines.  
If these measures do not eliminate the  
interference, please consult your dealer  
or an experienced radio/television  
technician for additional suggestions.  
Also, the Federal Communications  
Commission has prepared a helpful  
booklet, How To Identify and Resolve  
Radio/TV Interference Problems.This  
booklet is available from the U.S.  
GovernmentPrinting Office, Washington,  
D.C. 20402. Please specify stock number  
004-000-00345-4 when ordering copies.  
Safety information  
5
 
2.1  
Power requirements  
2
Important  
This product requires an electrical  
supply of 120 volts AC. In case of  
power failure, the communication can  
be lost.  
The Electrical network is classified as  
hazardous. The only way to power  
down the charger is to unplug the  
power supply from the electrical  
outlet. Ensure that the electrical outlet  
is always easily accessible.  
The voltage on the network is  
classified as TNV-3  
(Telecommunication Network  
Voltages), as defined in the standard  
UL 60950.  
Take time to read this user manual before  
you use your phone. It contains important  
information and notes regarding your phone.  
NOTICE: This product meets the  
applicable Industry Canada technical  
specifications.  
The equipment must be installed using an  
acceptable method of connection. The  
customer should be aware that compliance  
with the above conditions may not prevent  
degradation of service in some situations.  
Repairs to certified equipment should be  
made by an authorized Canadian  
maintenance facility designated by the  
supplier. Any repairs or alterations made  
by the user to this equipment, or  
equipment malfunctions, may give the  
telecommunications company cause to  
request the user to disconnect the  
equipment.  
Users should ensure for their own  
protection that the electrical ground  
connections of the power utility,  
telephone lines and internal metallic  
water pipe systems, if present, are  
connected together. This precaution may  
be particularly important in rural areas.  
CAUTION: Users should not attempt to  
make such connections themselves, but  
should contact the appropriate electric  
inspection authority, or electrician, as  
appropriate.  
!
Warning  
To avoid damage or malfunction:  
Do not allow the charging contacts or  
the battery to come into contact with  
metal objects.  
Do not open it as you could be  
exposed to high voltages.  
Do not allow the charger to come into  
contact with liquids.  
Never use any other battery than the  
one delivered with the product or  
recommended by Philips: risk of  
explosion.  
Always use the cables provided with  
the product.  
Handsfree activation could suddenly  
increase the volume in the earpiece to  
a very high level: make sure the  
handset is not too close to your ear.  
This equipment is not designed to  
make emergency calls when the power  
fails. An alternative has to be made  
available to allow emergency calls.  
NOTES: This equipment may not be used  
on coin service provided by the  
telephone company.  
6
Important  
 
Do not expose the phone to excessive  
heat caused by heating equipment or  
direct sunlight.  
2.3  
Electric, Magnetic and  
Electromagnetic Fields  
("EMF")  
Do not drop your phone or allow  
objects to fall on your phone.  
Do not use any cleaning agents  
containing alcohol, ammonia, benzene,  
or abrasives as these may harm the set.  
Do not use the product in places  
where there are explosive hazards.  
Do not let small metal objects come  
into contact with the product. This can  
deteriorate audio quality and damage  
the product.  
1. Philips Royal Electronics  
manufactures and sells many  
consumer oriented products which  
usually, as with any electronic  
apparatus, have the ability to emit  
and receive electro magnetic signals.  
2. One of Philips' leading Business  
Principles is to take all necessary  
health and safety precautions for our  
products, to comply with all  
applicable legal requirements and to  
stay well within the EMF standards  
applicable at the time of producing  
the products.  
Active mobile phones in the vicinity  
may cause interference.  
About operating and storage temperatures:  
Operate in a place where temperature  
is always between 0 and 35º C (32 to  
95º F).  
Store in a place where temperature is  
always between -20 and 45º C (-4 to  
113º F).  
3. Philips is committed to develop,  
produce and market products that  
cause no adverse health effects.  
4. Philips confirms that if its products  
are handled properly for their  
intended use, they are safe to use  
according to scientific evidence  
available today.  
Battery life may be shortened in low  
temperature conditions.  
5. Philips plays an active role in the  
development of international EMF  
and safety standards, enabling Philips  
to anticipate further developments  
in standardisation for early  
2.2  
Conformity  
We, Philips declare that the product is in  
compliance with the essential  
requirements and other relevant  
provisions of Directive 1999/5/EC. This  
product can only be connected to the  
analogue telephone networks of the  
countries mentioned on the packaging.  
You can find the Declaration of  
integration in its products.  
2.4  
Recycle your batteries  
Do not dispose your rechargeable  
batteries. Call the toll fee number 1-800-  
822-8837 to get instructions on how to  
recycle your batteries.  
Important  
7
 
 
®
The RBRC Seal on  
the nickel metal  
hydride battery  
2.5  
Service Centers  
US service center  
Philips Accessories & Computer  
Peripherals North America1881 Route  
46 WestLedgewood, NJ 07852  
Phone: (800) 233-8413  
E-mail support:  
indicates that Philips  
Royal Electronics is  
voluntarily  
participating in an industry program to  
collect and recycle these batteries at the  
end of their useful lives, when taken out  
of service within the United States and  
Canada.  
®
The RBRC program provides a  
convenient alternative to placing used  
nickel metal hydride batteries into the  
trash or municipal waste, which may be  
illegal in your area.  
®
Philips’s participation in RBRC makes it  
easy for you to drop off the spent battery  
at local retailers participating in the  
®
RBRC program or at authorized Philips  
product service centers.  
Please call 1-800-8-BATTERY for  
information on Ni-MH battery recycling  
and disposal bans/restrictions in your  
area. Philips’s involvement in this program  
is part of its commitment to protecting  
our environment and conserving natural  
resources.  
®
RBRC is a registered trademark of  
Rechargeable Battery Recycling  
Corporation.  
8
Important  
 
3
Your phone  
Congratulations on your purchase and welcome to Philips!  
To fully benefit from the support that Philips offers, register your product at  
3.1  
What’s in the box  
Handset  
Base station with  
bracket  
Battery door  
Belt clip  
2 AAA rechargeable  
NiMH batteries  
Power supply  
Line cord*  
User manual  
Note  
Guarantee  
Quick start  
guide  
*You may find in the box the line adaptor delivered separately from the line cable. In  
this case, you have to connect the line adaptor to the line cord first before  
plugging the line cord to the line socket.  
In multihandset packs, you will find one or more additional handsets, chargers with  
power supply units and additional rechargeable batteries.  
Your phone  
9
 
 
D
Navigation keys  
:
3.2  
Overview of your phone  
In idle mode: Scroll up to access the Call log  
and scroll down to access the Phonebook.  
During a call: Scroll up/down to increase or  
decrease earpiece and loudspeaker volume.  
In other modes: Scroll up/down a menu list  
or go to the previous or next record.  
E
Talk key  
r
In idle mode: Answer an incoming  
external or internal call.  
During a call: Activate the recall function.  
In phonebook/call log/redial list reviewing  
mode: Dial the selected number.  
F
Hang-up/Exit key  
e
In idle mode: Long press to switch on/off  
the handset.  
During a call: Hang up a call.  
In other modes: Short or long press to  
return to idle mode.  
G
Menu key  
m
In idle mode: Access the main menu.  
Loudspeaker key  
H
v
In idle mode: Turn on the loudspeaker  
and dial the number. Answer an incoming  
call using handsfree mode.  
During a call: Toggle the loudspeaker  
on/off.  
In phonebook/call log/dial list reviewing  
mode: Dial the selected number using  
handsfree mode.  
A
B
Earpiece  
OK key  
<
During a call: Access the Call menu  
In other modes: Select the function  
displayed on the handset screen directly  
above it.  
I
Redial key  
l
In idle mode: Access the Redial list.  
In direct dialing mode: Dial the last dialed  
number.  
C
Back/Clear key  
c
J
Keypad lock/format key  
*
In text or number editing mode: Short  
press to delete one digit/character. Long  
press to delete all digits/characters.  
In other modes: Select the function  
displayed on the handset screen directly  
above it.  
In idle mode: Insert *. Long press to lock/  
unlock keypad.  
10  
Your phone  
 
 
During a call: Switch from pulse dialing to  
tone dialing.  
In calllog reviewing mode: Press repeatedly  
to view the alternate dialing sequences.  
M
Call transfer/Intercom key  
i
In idle mode: Initiate an internal call.  
During a call: Hold the line and page  
another handset or toggle between an  
external and internal call. Long press to  
initiate a conference call.  
N
O
P
!
K
Ringer off key  
#
In idle mode: Insert #. Long press to turn  
the ringer on/off.  
Microphone  
Battery door  
Loudspeaker  
During a call: Insert #. Long press to insert  
a pause.  
In text editing mode: Switch  
between upper and lower case. Long press  
to insert a pause.  
Warning  
Handsfree activation can suddenly  
increase the volume in the earpiece to a  
very high level. Make sure the handset is  
not too close to your ear.  
L
Mute key  
M
During a call: Mute/unmute the handset  
microphone.  
Q
Belt clip  
Your phone  
11  
 
3.3  
Display icons  
A
Status bar  
Indicates battery is fully  
B
OK key  
Displays when in menu mode to confirm  
your selection.  
charged.  
Indicates battery is fully  
discharged.  
Indicates that an external call  
is connected or held. Icon  
blinks when receiving an  
incoming call.  
C
key  
Indicates that more options are available.  
Use the navigation keys to scroll up/down.  
Increase  
loudspeaker volume during a call.  
BACK key  
or Decrease  
earpiece or  
D
Indicates new voice messages  
received. Icon blinks when  
there are unread messages.  
Displays when the call log is  
accessed. Icon blinks when  
there are new missed calls.  
Displays when the  
Displays when in menu mode. Select  
BACK to return to the previous menu  
level. Select BACK to delete the last digit/  
character entered.  
3.4  
Overview of the base station  
phonebook is accessed.  
Displays when the alarm  
clock is activated.  
Displays when the  
loudspeaker is activated.  
Displays when ringer off is  
activated.  
Indicates that the handset is  
registered and within range  
of the base station. Icon  
blinks when the handset is  
out of range or is searching  
for a base.  
A
Handset locator key  
V
Page handset.  
Long press to start registration procedure.  
12  
Your phone  
 
     
the line adaptor to the line cord first before  
plugging the line cord to the line socket.  
4
Getting started  
!
Warning  
Avoid placing the base station too close to  
large metal objects such as filing cabinets,  
radiators or electrical appliances. This can  
impair the range and sound quality.  
Buildings with thick internal and external  
walls may impair transmission of signals to  
and from the base.  
4.1  
1
Connect the base station  
Place the base station in a central  
location near the telephone line  
socket and electricity socket.  
!
Warning  
The base station does not have an ON/OFF  
power switch. Power is applied when the  
power adaptor is plugged into the unit and  
connected to the electricity socket. The  
only way to power down the unit is to  
unplug the power adaptor from the  
electricity socket. Therefore, ensure that  
the electricity socket is easily accessible.  
The power adaptor and telephone line cord  
have to beconnected correctly, asincorrect  
connection could damage the unit.  
Always use the telephone line cord  
supplied with the unit. Otherwise, you  
may not get a dial tone.  
Connect the line cord and the  
power cable to their corresponding  
connectors at the back of the base  
station.  
2
4.2  
Wall mounting the base  
The base is designed to support wall  
mounting. To wall mount the base, follow  
the instructions below.  
!
Warning  
Other wall mounting methods are not  
recommended and may damage the  
product.  
Connect the other end of the line  
cord and power cable to their  
respective sockets.  
3
Remove the bracket from the back  
of the base station by pressing down  
the two latches on the top of the  
bracket.  
1
Note  
The line adaptor may not be attached to the  
line cord. In this case, you have to connect  
Getting started  
13  
 
   
4.3  
Install your phone  
Before using the handset, the batteries  
have to be installed and fully charged.  
4.3.1 Install battery  
!
Warning  
Always use AAA rechargeable batteries  
supplied with your unit. There could be  
risk of battery leakage if you use alkaline  
batteries or other battery types.  
Turn the bracket around and re-  
insert the bracket to the back of  
the base station.  
2
Slide out the battery cover.  
1
Place the batteries in the correct  
polarity as indicated and replace the  
cover.  
2
Slide the base down into place.  
3
4.3.2 Charge battery  
!
Use the pedestral wall mounting to  
plug your base station.  
Warning  
4
The handset must be charged for at least 24  
hours before using it for the first time.  
When the battery level becomes low, the  
low battery sensor alerts you by sounding an  
audible tone and blinking the battery icon.  
If the battery level becomes exceedingly  
low, the phone automatically switches off  
shortly after the alert and any function in  
progress will not be saved.  
Placethehandsetonthechargingcradle  
of the base station. A beep is emitted if  
the handset is placed correctly.  
1
14  
Getting started  
 
   
The battery icon  
blinks during charge.  
The battery icon  
on the display  
becomes steady  
2
3
when the handset is fully charged.  
Note  
Optimal battery life is reached after 3  
cycles of complete charging (over 15  
hours) and discharging, allowing  
approximately 12 hours of talk-time and  
150 hours of stand-by time.  
The indoor and outdoor range of the phone  
is up to 50 metres and 300 metres  
respectively. When the handset moves  
beyond the operation range, the antenna  
icon  
will blink.  
Tip  
When reaching the range limit and the  
conversation becomes crackly, move  
closer to the base.  
Getting started  
15  
 
4.4  
Menu structure  
The table below describes the menu tree of your phone.  
Press m key to display the main menu. Use navigation keys : to navigate within  
the menus and press < key to enter each option.  
PHONEBOOK  
NEW ENTRY  
LIST  
Phonebook entries  
EDIT ENTRY  
DELETE ENTRY  
DELETE ALL  
DIRECT MEMORY  
HANDSET NAME  
HANDSET TONES  
KEY 1/2  
PERSONAL SET  
RING VOLUME  
RING TONES  
KEY BEEP  
OFF/LEVEL 1/LEVEL 2/LEVEL 3/LEVEL 4  
Melody list  
ON/OFF  
LANGUAGE  
ENGLISH/ESPANOL/FRANCAIS  
ON/OFF  
AUTO HANG-UP  
SET DATE/TIME  
SET FORMAT  
CLOCK & ALARM  
TIME FORMAT  
DATE FORMAT  
12 HOURS  
24 HOURS  
DD/MM  
MM/DD  
ALARM  
OFF/ON ONCE/ON DAILY  
MELODY 1/2/3  
ALARM TONE  
16  
Getting started  
 
 
ADVANCED SET  
CHANGE PIN  
REGISTRATION  
UNREGISTER  
RESET  
AREA CODE  
AUTO PREFIX  
DETECT DIGIT  
PREFIX  
FLASH TIME  
DIAL MODE  
FIRST RING  
SHORT/MEDIUM/LONG  
TONE/PULSE  
ON/OFF  
Getting started  
17  
 
example, pressing 2 will show the  
entries starting with A. Pressing 2again  
will show the entries starting with B, etc...  
5
Using your phone  
5.1  
Make a call  
5.1.5 Call from the call log  
Press u in idle mode.  
1
2
3
5.1.1 Predialling  
Scroll :to an entry in the call log.  
Dial the number (maximum 24 digits).  
1
2
Press r key.  
Press r key.  
The call is initiated.  
The call is initiated.  
Note  
Tip  
You need to subscribe to Caller Line  
Identification service to be able to see the  
caller’s number or name in the call log.  
(see “Access call list” on chapter 6.7.1)  
You may insert a prefix number to the  
beginning of your predial number, see  
“Set Prefix” on chapter 9.6 for more  
information.  
5.1.5.1  
To choose the format for  
call log display  
5.1.2 Direct dialling  
Press r or v key to take the  
1
You must choose the correct format to  
dial the area code and number of the call  
log record chosen. The original incoming  
number from the call log will appear as a  
7, 10 or 11-digit number. If it is a long  
distance call, the prefix digit 1 will  
automatically appear in front of the 10-  
digit local calls.  
line.  
Dial the number.  
The call is initiated.  
2
5.1.3 Call from redial list  
Press l key in idle mode.  
1
2
Scroll : to an entry in the redial  
list.  
When viewing the call log, press  
*to change the format of the call  
log display as it should be dialled  
from your location. For example, if  
the call log entry appears as  
“234-567-8900”:  
1
Press r key.  
3
The call is initiated.  
5.1.4 Call from the phonebook  
Press d in idle mode.  
1
2
3
Scroll : to a phonebook entry.  
Press * once to display  
Press r key.  
“1-234-567-8900”  
The call is initiated.  
Press *twice to display “567-8900”  
Press * 3 times to display  
“1-567-8900”  
Tip  
Instead of scrolling : to browse the  
phonebook entries, you can press the  
numeric key corresponding to the first  
letter of the entry you wish to locate. For  
Press * 4 times to display  
“1-234-567-8900” again.  
18  
Using your phone  
 
           
To dial the current displayed  
2
5.2.1 Handsfree answering  
number, press r key.  
Danger  
The call is initiated.  
Handsfree activation can suddenly  
increase the volume in the earpiece to a  
very high level. Make sure the handset is  
not too close to your ear.  
Note  
You need to subscribe to Caller Line  
Identification service to be able to see the  
caller’s number or name in the call log  
(see “Access call list” on chapter 6.7.1).  
When saving the call list entry to  
phonebook, theoriginal incomingnumber  
will be saved instead of the current  
displayed number.  
When the phone rings, press v key.  
The handset loudspeaker is  
activated.  
5.3  
End a call  
To end a conversation, press e key.  
If the first 3 digits of the incoming number  
corresponds to the local area code set in  
your phone, they will be filtered  
The call ends.  
Tip  
automatically when you press the r or  
vkey to dial. To change the local area  
code, please refer to see “Set area code”  
on chapter 9.5.  
You can simply place the handset back to its  
base station to end the call (see “Activate/  
deactivate auto hang-up” on chapter 7.3).  
This feature is activated by default.  
Note  
The call duration (HH-MM-SS) will be  
5.2  
Answer a call  
Danger  
dcispBlaAyCedK.otnotrheetuhranndtoseitdlsecrmeoend.eP. ress  
When the handset rings during an incoming  
call, please do not hold the handset too  
close to your ear as the volume of the  
ringing tone may damage your hearing.  
When the phone rings, press r key.  
The call is established.  
Note  
Incoming call has priority over other events.  
Whenever there is an incoming call, other  
status in progress such as phone setting,  
menu navigation, etc will be aborted.  
Using your phone  
19  
 
     
T U V 8 ?  
8
9
0
#
*
6
Use more of your  
phone  
W X Y Z 9  
0 - / \ # +  
6.1  
Switch the handset on/off  
#
*
Press and hold e key for more than 5  
seconds to switch on/off the handset in  
idle mode.  
Tip  
Press cBACK to delete the last digit or  
6.2  
Keypad lock/unlock  
character entered.  
Press and hold * key for 1 second to  
lock/unlock the keypad in idle mode.  
6.4  
Call in progress  
Some options are available to you during a  
call. The available options are:  
6.3  
Text or number entry  
When you select a field in which you can  
enter text, you can enter the letters that  
are printed on the keys by pressing the  
relevant key once or several times. For  
example, to enter the name “PAUL”:  
6.4.1 Adjust earpiece volume  
During a call, press : to select from  
VOLUME 1 to VOLUME 3  
.
Press 7 once:  
P
1
2
3
4
Press 2 once: PA  
6.4.2 Mute/unmute microphone  
When the microphone is muted, your  
correspondent cannot hear you.  
Press 8 twice: PAU  
Press 5 three times: PAUL  
During a call, press Mkey to turn  
1
The table below gives you the character  
assignment during text or number entry:  
off the microphone.  
Press M key again to turn on the  
2
Keys  
Assigned characters  
microphone.  
space 1 _ < > *  
1
6.4.3 Activate/deactivate  
loudspeaker mode  
A B C 2  
D E F 3  
G H I 4  
J K L 5  
2
3
4
5
6
7
Danger  
Handsfree activation can suddenly  
increase the volume in the earpiece to a  
very high level. Make sure the handset is  
not too close to your ear.  
M N O 6  
P Q R S 7  
During a call, press v key to  
1
activate the loudspeaker mode.  
Press v key again to return to  
2
normal mode.  
20  
Use more of your phone  
 
               
ENTER NUMBER is displayed on the  
screen.  
4
5
6.4.4 Adjust loudspeaker volume  
During a call, press : to select from  
Enter the number (maximum 24  
digits) and press <OK to confirm.  
VOLUME 1 to VOLUME 5  
.
A validation tone is emitted.  
6.4.5 Call waiting  
Note  
If you have subscribed to Call Waiting  
service, the earpiece will emit a beep tone  
to inform you that there is a second  
incoming call. The number or name of the  
second caller will also be displayed on your  
phone if you have subscribed to Caller  
Line Identification service (CLI). Please  
contact your network provider for more  
Press cBACK to delete the last digit or  
character entered.  
To return to idle mode, press e key.  
Tip  
You cannot store a new phonebook entry  
when the memory is full. In this case, you  
have to delete existing entries to make  
space for new entries.  
information on this service  
.
When you receive a second incoming call  
while on the phone, you can carry out the  
following operations:  
6.5.2 Access phonebook  
Press d in idle mode to browse  
1
the phonebook entries.  
Put the current call on hold  
and answer the second call.  
r+2  
Alternatively, you can press m  
key, scroll : to PHONEBOOK  
and press < , scroll :to LIST  
End the current call and  
answer the second call.  
r+1  
and press <OOKK  
.
The above operations may be different  
according to your network.  
The phonebook entries will be listed  
in alphabetical order.  
To view the details, press <OK.  
2
6.5  
Using your phonebook  
Your phone can store up to 50 phonebook  
memories. Each phonebook entry can  
have a maximum of 24 digits for the phone  
number and 12 characters for name.  
Tip  
Instead of scrolling : to browse the  
phonebook entries, you can press the  
numeric key corresponding to the first  
letter of the entry you wish to locate. For  
example, pressing 2 will show the  
entries starting with A. Pressing 2again  
will show the entries starting with B, etc...  
6.5.1 Store a contact in the  
phonebook  
1
Press m key in idle mode, scroll  
: to PHONEBOOK and press  
<OK. Press <OK again to enter  
6.5.3 Modify a phonebook entry  
NEW ENTRY  
.
Press m key in idle mode, scroll  
1
ENTER NAME is displayed on the screen.  
Enter the name of the contact  
(maximum 12 characters) and press  
<OK.  
2
3
: to PHONEBOOK and press  
<OK, scroll : to EDIT ENTRY  
and press <OK.  
Scroll :to select an entry to edit.  
2
Use more of your phone  
21  
 
     
Press <OK to display name. Edit  
the name and press <OK.  
Edit the number and press <OK to  
confirm.  
3
4
6.5.6.1  
Add/edit direct access  
memory  
Press m key in idle mode, scroll  
: to PHONEBOOK and press  
<OK, scroll : to DIRECT  
1
A validation tone is emitted.  
Scroll :atnod press <  
KEY 1 or KEY 2 and  
MEMORY  
OK.  
6.5.4 Delete a phonebook entry  
2
Press m in idle mode, scroll :  
1
press <OK.  
to PHONEBOOK and press <OK  
scroll : to DELETE ENTRY and  
press <OK.  
,
The stored number is displayed (if  
any).  
Press m to enter direct memory  
3
4
5
6
Scroll : to select an entry to  
delete and press <OK.  
2
3
menu.  
Scroll : to select EDIT and press  
<OK.  
CONFIRM? is displayed on the  
screen. Press <OK again to  
confirm deletion.  
ENTER NAME is displayed on the  
screen.  
A validation tone is emitted.  
Enter the name of the contact  
(maximum 12 characters) and press  
Note  
Press cBACK to discard change and the  
OK  
.
screen returns to phonebook list.  
ENTER NUMBER is displayed on the  
screen.  
Enter the number (maximum 24  
digits) and press OK to confirm.  
7
8
6.5.5 Delete the phonebook list  
Press m key in idle mode, scroll  
1
: to PHONEBOOK and press  
A validation tone is emitted.  
<OK.  
Scroll : to DELETE ALL and  
2
6.5.6.2  
Delete direct access  
memory  
press <OK.  
CONFIRM? is displayed on the screen.  
3
Press m key in idle mode, scroll  
: to PHONEBOOK and press  
<OK, scroll : to DIRECT  
1
Press <OK again to confirm deletion.  
A validation tone is emitted.  
Note  
Scroll :atnod press <  
KEY 1 or KEY 2 and  
MEMORY  
OK.  
Press cBACK to discard change and the  
2
screen returns to phonebook list.  
press <OK.  
The stored number is displayed (if  
any).  
6.5.6 Direct access memory  
There are 2 direct access memories  
(Keys 1 and 2) included in the  
phonebook memory. A long press on the  
keys in idle mode will automatically dial  
the stored phone number.  
Press m to enter direct memory  
3
4
menu.  
Scroll : to DELETE and press  
<OK.  
22  
Use more of your phone  
 
 
CONFIRM? is displayed on the  
screen. Press <OK to confirm  
deletion.  
5
6.6.3 Delete a redial number  
Press l key in idle mode to go to  
1
the redial list, scroll :to select an  
A validation tone is emitted and the  
screen returns to previous menu.  
entry and press m.  
Scroll : to DELETE and press  
2
<OK.  
6.6  
Using the redial list  
CONFIRM? is displayed on the  
screen.  
3
The redial list stores the last 5 numbers  
dialed. A maximum of 24 digits can be  
displayed for each entry.  
Press <OK to confirm deletion.  
A validation tone is emitted and the  
screen returns to redial list.  
6.6.1 Access redial list  
Note  
Press l key to go to the redial  
1
Press cBACK to discard change and the  
list and scroll : to browse the  
screen returns to redial list.  
redial list.  
The last number dialed will appear  
first in the redial list. If the redial  
number matches a phonebook  
entry, the name will be displayed  
instead.  
6.6.4 Delete the redial list  
Press l key in idle mode to go to  
1
the redial list and press m, scroll  
to DELETE ALL and press <OK  
.
To view the details, press <OK key.  
Note  
2
CONFIRM?  
Press mistodicsoplnafyiremd odneltehteiosnc.reen.  
2
A validation tone is emitted and the  
screen returns to redial list.  
To return to idle mode, press e key.  
6.6.2 Save a redial number into  
the phonebook  
Note  
Press cBACK to discard change and the  
Press l key in idle mode to go to  
1
screen returns to redial list.  
the redial list, scroll :to select an  
entry and press <OK. Press m  
6.7  
Using the call log  
again to enter SAVE NUMBER  
.
The call log stores the last 10 external calls  
and any new voice mail received. If you  
have subscribed to Caller Line  
Identification (CLI), and provided the  
identity of the caller is not withheld, the  
name (or number) of the caller will be  
displayed.  
ENTER NAME is displayed on the  
screen.  
2
3
Enter the name of the contact  
(maximum 12 characters) and press  
<OK.  
A validation tone is emitted. SAVED !  
is displayed for 2 seconds and the  
screen returns to redial list.  
Note  
If the identity of the caller is withheld or  
the network does not provide the date  
and time information, then the information  
will not be displayed in the call log.  
Note  
Press cBACK to delete the last character  
entered.  
Use more of your phone  
23  
 
           
If you have not subscribed to Caller Line  
Identification service, there will not be  
any information displayed in the call log.  
ENTER NAME is displayed on the  
screen.  
3
4
Enter the name of the contact  
(maximum 12 characters) and press  
<OK.  
6.7.1 Access call list  
SAVE ! is displayed for 2 seconds  
Press u in idle mode to browse  
1
and the screen returns to call log.  
the call list.  
Note  
The calls (missed and received) are  
displayed in chronological order  
with the most recent call at the top  
of the list.  
Press cBACK to delete the last character  
entered.  
6.7.4 Delete a call list entry  
To view the details, press <OK.  
2
Press u in idle mode, scroll :  
1
The call number is displayed. Press  
to a call list entry and press m.  
<OK again to view more details.  
Scroll : to DELETE and press  
2
<OK to confirm deletion.  
6.7.2 Consulting the call list  
The screen can either display :  
CONFIRM? is displayed on the  
screen.  
3
the caller’s number*  
the caller’s name (if recorded in the  
phonebook)*  
<UNKNOWN> if it is an unidentified  
call  
Press <OK to confirm deletion.  
A validation tone is emitted and the  
screen returns to call log.  
Note  
Press cBACK to discard change and the  
<
<
WITHHELD> if it is a private call.  
UNAVAILABLE> if it is a public or  
screen returns to call log.  
out of area call.  
6.7.5 Delete the call list  
*
Subject to a subscription with your  
Press u in idle mode, scroll :  
network operator.  
1
to a call list entry and press m.  
Note  
Scroll : to DELETE ALL and  
2
You can display the phone number, the  
time and the date of the call by pressing  
<OK. The time and date displayed is  
dependent on the network.  
press <OK.  
CONFIRM? is displayed on the  
screen.  
3
Press <OK again to confirm  
deletion.  
6.7.3 Save call list entry into the  
phonebook  
A validation tone is emitted and the  
screen returns to call log.  
Press u in idle mode, scroll :  
1
Note  
to a call list entry and press m.  
Press cBACK to discard change and the  
Scroll : to SAVE NUMBER and  
2
screen returns to call log.  
press <OK.  
24  
Use more of your phone  
 
     
Press r key on the called handset  
to answer the internal call, where  
both internal callers can talk.  
3
4
6.8  
!
Using the intercom  
Warning  
Intercom and call transfer is only possible  
with handsets registered to the same base  
station.  
Intercom is established.  
Press ekey on the first handset to  
transfer the external call to the  
called handset.  
This feature is only available when there are  
at least 2 registered handsets. It allows you  
to make free internal calls, transfer external  
calls from one handset to another and use  
the conference option.  
The external call is transferred.  
Note  
If there is no answer from the called  
handset, press i key to resume the  
external call.  
6.8.1 Intercom another handset  
6.8.3 Answer an external call  
during intercom  
Note  
If the handset does not belong to CD150/  
155 range, this function may not be available.  
During intercom, a new call tone is  
emitted when there is an incoming  
external call.  
1
Press i key in idle mode.  
1
Intercom is established immediately if  
there are only 2 registered handsets.  
Press rto answer the external call  
2
and end the intercom.  
If there are more than 2 registered  
handsets, the handset numbers which  
are available for intercom will be  
displayed. Scroll :to select the  
specific handset number you wish to  
call and press <OK to start intercom.  
2
Connection with the external call is  
established.  
Note  
To put the internal call on hold and answer  
the incoming external call, press ikey.  
6.8.2 Transfer an external call to  
another handset  
6.8.4 Switch between an internal  
and external call  
During the call, press and hold i  
1
During the call, long press * key to  
switch between an internal or external  
call.  
key to put the external call on hold  
(the caller can no longer hear you).  
Intercom is established immediately if  
there are only 2 registered handsets.  
6.8.5 Establish a three-party  
conference call  
If there are more than 2 registered  
handsets, the handset numbers  
which are available for intercom will  
be displayed. Scroll :to select the  
specific handset number you wish to  
call and press <OK.  
2
The conference call feature allows one  
external call to be shared with two  
handsets (in intercom). The three parties  
can share the conversation and no  
network subscription is required.  
The called handset rings.  
Use more of your phone  
25  
 
       
During the call, long press i key  
to put the external call on hold (the  
caller can no longer hear you).  
If there are more than 2 registered  
handsets, the handset numbers  
which are available for intercom will  
be displayed. Scroll :to select the  
specific handset number you wish to  
call and press <OK.  
1
2
Press ror vkey on the called  
handset to answer the internal call,  
where both internal callers can talk.  
3
4
Intercom is established.  
Press and hold i key for 2  
seconds on the first handset to start  
the three-party conference.  
CONFERENCE will be displayed on  
the screen once the conference call  
is established.  
Tip  
To establish intercom using handsfree  
mode, press vkey again on the called  
handset to turn on speakerphone.  
6.9  
Handset locating  
The paging feature enables you to locate  
a missing handset if the handset is in range  
and contains charged batteries.  
Press V key on the base station.  
1
All the registered handsets start to  
ring.  
Once retrieved, press any key on the  
handset to end the handset locating.  
2
Note  
If there are no key presses within 30  
seconds, the handset and base station will  
automatically return to idle mode.  
Tip  
Press V key on the base station again  
to stop handset locating.  
26  
Use more of your phone  
 
 
Scroll : to your desired volume  
2
level and press <OK to confirm.  
7
Personal settings  
A validation tone is emitted and the  
screen returns to previous menu.  
7.1  
Change the handset name  
Note  
You can name the handset and display the  
handset name in idle mode. The default  
handset name of your handset is PHILIPS  
When RINGER OFF is activated, the icon  
will be displayed on the screen.  
.
Press m key in idle mode, scroll  
1
7.2.2 Set the tones melody  
There are 10 ring melodies available on  
your handset.  
: to PERSONAL SET and press  
<OK, scroll : to HANDSET  
NAME and press <OK  
.
Press m key in idle mode, scroll  
1
The last stored name is displayed.  
Press cBACK key to delete the  
characters one by one.  
2
3
: to PERSONAL SET and press  
<OK, press <OK to enter  
HANDSET TONES, scroll : to  
Enter the new name (maximum 10  
characters) and press <OK to  
confirm.  
RING TONES and press <OK  
.
Scroll : to your desired melody  
2
3
to play the melody.  
A validation tone is emitted and the  
screen returns to previous menu.  
Press <OK to set the ring melody.  
A validation tone is emitted and the  
screen returns to previous menu.  
7.2  
Handset Tones  
7.2.3 Activate/deactivate key  
tone  
7.2.1 Set the ring volume  
Danger  
A single tone is emitted when a key is  
pressed. You can enable or disable the  
key tone. By default, the key tone is ON  
When the handset rings during an  
incoming call, please do not hold the  
handset too close to your ear as the  
volume of the ringing tone may damage  
your hearing.  
.
Press m key in idle mode, scroll  
1
: to PERSONAL SET and press  
<OK, press <OK to enter  
HANDSET TONES, scroll : to  
There are 5 ringer volume options (OFF  
,
KEY BEEP  
OK.  
Scroll :atnod press <  
ON or OFF and press  
LEVEL 1  
,
LEVEL 2, LEVEL 3 and LEVEL 4).  
2
The default level is LEVEL 2  
.
<OK to confirm.  
Press m key in idle mode, scroll  
: to PERSONAL SET and press  
<OK, press <OK to enter  
1
A validation tone is emitted and the  
screen returns to previous menu.  
HANDSET TONES and press <OK  
again to enter RING VOLUME  
.
Personal settings  
27  
 
           
7.3  
Change the display language  
Your handset can support different  
display languages.  
Press m key in idle mode, scroll  
1
: to PERSONAL SET and press  
<OK, scroll : to LANGUAGE  
and press <OK.  
Scroll :to your desired language  
2
and press <OK to confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
Tip  
Once the display language is set, the  
option menus on the handset will switch  
to display in the selected language  
immediately.  
7.4  
Activate/deactivate auto  
hang-up  
This function enables you to end a call  
automatically by simply placing the  
handset on the base station. By default,  
the Auto Hang up feature is ON  
.
Press m key in idle mode, scroll  
: to PERSONAL SET and press  
<OK, scroll : to AUTO HANG-  
1
UP and press <OK  
.
Scroll : to ON or OFF and press  
2
<OK to confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
28  
Personal settings  
 
     
8.2  
Set date/time format  
8
Clock and Alarm  
You can set your preferred date/time  
format for your phone. The default  
This feature allows you to set the date,  
time and alarm settings for your phone.  
The default date and time is 2008/01/01  
and 12:00 am respectively.  
format is MM/DD and 12 HOURS  
.
8.2.1 Set time format  
Press m in idle mode, scroll :  
to CLOCK & ALARM and press  
<OK, scroll :to SET FORMAT  
and press <OK.  
1
8.1  
Set date and time  
Press m in idle mode, scroll :  
to CLOCK & ALARM and press  
<OK, press <OK to enter SET  
1
Press <OK to enter TIME  
2
3
FORMAT  
.
DATE/TIME  
.
The current setting is displayed.  
The last stored date is displayed.  
Enter the current date (YYYY/MM/  
DD) and press <OK.  
2
3
Scroll : to select time format  
display (12 HOURS or 24 HOURS  
and press <OK to confirm.  
)
The last stored time is displayed.  
Enter the current time (HH:MM) and  
A validation tone is emitted and the  
screen returns to previous menu.  
scroll : to select am or pm  
.
Press <OK to confirm.  
8.2.2 Set date format  
A validation tone is emitted.  
Press m in idle mode, scroll :  
1
Note  
to CLOCK & ALARM and press  
<OK, scroll :to SET FORMAT  
and press <OK.  
An error tone will be emitted if an invalid  
digit is entered in the date/time fields.  
Hour: 00 to 12; Minute: 00 to 59  
Date: 01 to 31; Month: 01 to 12  
Scroll : to enter SET FORMAT  
2
and press <OK.  
!
The current setting is displayed.  
Warning  
Scroll : to select date format  
display (DD/MM or MM/DD) and  
press <OK to confirm.  
3
If your phone is connected to an ISDN  
line through an adaptor, the date & time  
may be updated after each call. The  
availability of date & time update is  
dependent on your network provider.  
Please check the date & time settings in  
your ISDN system or contact your  
network provider.  
A validation tone is emitted and the  
screen returns to previous menu.  
8.3  
1
Set alarm  
Press m in idle mode, scroll :  
to CLOCK & ALARM and press  
<OK, scroll : to ALARM and  
press <OK.  
Clock and Alarm  
29  
 
     
Scroll :to OFF, ON ONCE or ON  
2
3
DAILY and press <OK  
.
If you select ON ONCE or ON  
DAILY, enter the time (HH:MM) for  
the alarm and scroll : to select  
am or pm. Press <OK to confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
Note  
The alarm tone and alarm icon  
will  
only sound/blink for 1 minute when the  
alarm time is reached. To mute the alarm  
tone, simply press any key on the handset.  
8.4  
Set alarm tone  
Press m in idle mode, scroll :  
to CLOCK & ALARM and press  
<OK, scroll :to ALARM TONE  
and press <OK.  
1
Scroll : to MELODY 1  
,
MELODY  
2
2
or MELODY 3 and press <OK to  
confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
30  
Clock and Alarm  
 
 
9.2  
Registration  
9
Advanced settings  
The procedures described below are the  
procedures that you will find in your  
handset. The procedures may vary  
according to the handset you want to  
register. In this case, please refer to the  
manufacturer of the additional handset.  
Additional handsets must be registered to  
the base unit before you can use them. Up  
to 4 handsets can be registered to one  
base station.  
9.1  
Change Master PIN  
The default Master PIN number is 0000.  
The maximum length of the Master PIN is  
8 digits. This PIN is also used to protect  
the settings of your handset. Your  
handset will prompt you whenever the  
PIN is required.  
Note  
Insert battery to power up the  
handset. The LCD displays "PRESS  
OK KEY TO REGISTER".  
Press <OK on handset, the LCD  
displays "HOLD LOCATOR KEY  
DURING 5s".  
Within 5 minutes, press the locator  
key on base station to start  
registration.  
1
2
3
The default pin code is preset to 0000. If  
you change this PIN code, keep the PIN  
details in a safe place where you have easy  
access to them. Do not lose the PIN  
code.  
Press m key in idle mode, scroll  
1
: to ADVANCED SET and press  
<OK, scroll : to CHANGE PIN  
and press <OK.  
If registration succeeds, the handset  
returnsto idle mode.  
If registration fails, the LCD will  
display "PRESS OK KEY TO  
REGISTER". Repeat the process  
again.  
4
5
Enter the Master PIN when  
prompted and press <OK to  
confirm.  
2
3
The PIN entered will be shown as  
asterisks (*) on the screen.  
Enter the new PIN and press <OK  
to confirm.  
9.3  
Unregister  
A validation tone is emitted and the  
screen returns to previous menu.  
Press m key in idle mode, scroll  
: to ADVANCED SET and press  
<OK, scroll : to UNREGISTER  
and press <OK.  
1
Tip  
If you forget your PIN, you will need to  
reset your phone to its default settings.  
See “Reset unit” on chapter 9.4 for more  
details.  
Scroll :to select the handset  
number to unregister and press <OK.  
2
A validation tone is emitted to indicate  
successful unregistration and the  
screen returns to idle mode.  
Advanced settings  
31  
 
     
Note  
is set, the phone automatically filters  
the area code for all incoming calls, by  
removing the area code for local calls and  
retaining the area code for calls from other  
areas. If it is a local call, then only the phone  
number of the caller is displayed during an  
incoming call or when you call the number  
from the call log. If it is a long distance call,  
then both the area code and phone number  
will be displayed in a proper format to be  
dialed out directly from the call log, or  
saved into the phonebook.  
If no action is taken on the handset within  
15 seconds, the unregistration procedure  
will be aborted and the handset returns  
to idle mode.  
To unregister a handset that does not  
belong to the CD150/155 range, you can  
only use the CD150/155 handset to  
unregister it.  
9.4  
Reset unit  
You can reset your phone to its default  
settings with this feature.  
Note  
!
You can enter a maximum of 3 digits for  
the area code. You need to subscribe to  
Caller Line Identification service to be  
able to see the caller’s number or name in  
the call log. See “Using the call log” on  
chapter 6.7 for details.  
Warning  
Upon reset, all your personal settings, call  
log and redial list entries will be deleted  
and the phone will return to its default  
settings. However, your phonebook will  
remain unchanged after reset.  
Press m in idle mode, scroll :  
1
Note  
to ADVANCED SET and press  
<OK, scroll : to AREA CODE  
and press <OK.  
You may have to configure your phone  
once again.  
Press m key in idle mode, scroll  
1
Enter the local area code (maximum  
2
: to ADVANCED SET and press  
<OK, scroll : to RESET and  
press <OK.  
3 digits) and press <OK to save.  
A validation tone is emitted and the  
screen returns to previous menu.  
CONFIRM? is displayed on the  
screen.  
2
3
9.6  
Set prefix  
Press <OK again to confirm.  
This feature allows you to define a prefix  
number to be added to the beginning of a  
number during predialling (see  
“Predialling” on chapter 5.1.1). You may  
also use this feature to add a detect string  
to match and replace the first few digits of  
the number during predialling.  
You can enter up to a maximum of 5  
digits for the detect string and auto prefix  
number respectively.  
A validation tone is emitted.  
The unit is reset to its default  
settings. (see “Default settings” on  
chapter 9.10)  
9.5  
Set area code  
This feature is useful when you have  
subscribed to Caller Line Identification  
service. It allows you to set an area code  
in your CD150. Once the local area code  
32  
Advanced settings  
 
       
Press m key in idle mode, scroll  
: to ADVANCED SET and press  
<OK, scroll : to AUTO PREFIX  
and press <OK.  
you should not need to change it.  
1
2
3
Press m key in idle mode, scroll  
1
: to ADVANCED SET and press  
<OK, scroll : to FLASH TIME  
and press <OK.  
DETECT DIGIT is displayed on the  
screen. Press <OK to enter.  
Scroll :to SHORT MEDIUM or  
LONG and press <O,K to confirm.  
2
The last stored detect string is  
displayed (if any).  
A validation tone is emitted and the  
screen returns to previous menu.  
Enter a detect string number  
(maximum 5 digits) and press <OK  
to confirm.  
9.8  
Change the dial mode  
The default value for dial mode that is  
preset in your handset should be the best  
suited for your country network and  
therefore you should not need to change it.  
A validation tone is emitted and the  
screen returns to previous menu.  
Press :to scroll to PREFIX. Press  
4
5
<OK to enter.  
There are two dial modes: Tone or Pulse  
.
The last stored prefix number is  
displayed (if any).  
Press m key in idle mode, scroll  
1
: to ADVANCED SET and press  
<OK, scroll : to DIAL MODE  
and press <OK.  
Enter the prefix number (maximum  
10 digits) and press <OK to  
confirm.  
Scroll : to TONE or PULSE and  
2
A validation tone is emitted and the  
screen returns to previous menu.  
press <OK to confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
Note  
If no detect string (blank) is entered, the  
prefix number will be automatically added  
to the predial number after r key is  
pressed.  
For numbers starting with *, # or P, the  
prefix number will not be added to the  
predial number after r key is pressed.  
9.9  
Set first ring  
When this function is set to Off, the first  
ring from a voice call will not sound. This is  
particularly useful in countries where calling  
line identity is sent after the first ring.  
Consequently, the phones in the house will  
not ring when a message arrives.  
9.7  
Change flash time  
Press m in idle mode, scroll :  
1
Flash time (or dial delay) is the time delay  
by which the line will be disconnected  
after you press r key. It can be set to  
short, medium or long.  
The default value of flash time that is preset  
in your handset should be the best suited  
for your country network and therefore  
to ADVANCED SET and press  
<OK, scroll to FIRST RING and  
press <OK.  
Scroll : to ON or OFF and press  
2
<OK to confirm.  
A validation tone is emitted and the  
screen returns to previous menu.  
Advanced settings  
33  
 
   
9.10 Default settings  
Ringer Volume  
Tone Melody  
LEVEL 2  
FLICK  
Earpiece Volume VOLUME 2  
Key Tone  
ON  
Language  
Auto Hang Up  
Country dependent  
ON  
Handset Name PHILIPS  
Time/Date  
Time format  
Date format  
Dialing Mode  
Flash Time  
First Ring  
2008/01/01; 12:00am  
12 HOURS  
MM/DD  
Country dependent  
Country dependent  
Country dependent  
0000  
Master PIN  
Alarm  
OFF  
Alarm Tone  
Auto Prefix  
Area Code  
MELODY 1  
EMPTY  
EMPTY  
34  
Advanced settings  
 
   
10 Technical data  
Display  
Relative humidity  
Progressive LCD backlight  
Operation: Up to 95% at 40°C  
Storage: Up to 95% at 40°C  
The backlight remains on for 15  
seconds after each activation such as  
an incoming call, key presses, lifting the  
handset off the base station, etc.  
The colour of the LCD backlight is  
Amber.  
General telephone features  
Dual mode caller name & number  
identification  
5 standard ringer melodies and 5  
polyphonic ringer melodies  
Phonebook list, Redial list  
and Call log  
Phonebook list with 50 entries  
Redial list with 5 entries  
Call log with 10 entries  
Battery  
2 x HR AAA NiMh 550 mAh batteries  
Power consumption  
Power consumption at idle mode:  
around 800mW  
Temperature range  
Operation: Between 0 and 35º C (32  
to 95º F).  
Storage: Between -20 and 45º C (-4 to  
113º F).  
Technical data  
35  
 
 
11 Frequently asked  
questions  
In this chapter, you will find the most  
frequently asked questions and answers  
about your phone.  
Connection  
Sound  
The handset does not switch on!  
Handset does not ring!  
Check that the RING VOLUME is not set  
to RINGER OFF, and make sure icon is  
not displayed on the screen (see “Set the  
ring volume” on chapter 7.2.1).  
Charge the batteries: Put the handset on  
the base station to charge. After a few  
moments, the phone will switch on.  
The handset does not charge!  
Check charger connections.  
Caller does not hear me!  
Microphone may be muted: During a call,  
press M.  
icon is not blinking during  
charge!  
Battery is full: There is no need to  
charge the battery.  
There’s no dialling tone!  
No power: Check the connections.  
Batteries are empty: Charge the  
batteries.  
Bad battery contact: Adjust the  
handset slightly.  
Dirty contact: Clean the batteries  
contact with a cloth moistened with  
alcohol.  
Move closer to the base station.  
Wrong line cable used: Use the line  
cable provided.  
Communication is lost during a call!  
Line adaptor is required: Connect the  
line adaptor to the line cord.  
Charge the battery  
Move closer to the base station.  
The phone is "Out of range"!  
Move closer to the base station.  
Set-up  
SEARCHING... is displayed on handset  
and  
icon is blinking!  
Frequent noise interference on my  
radio or television!  
Move closer to the base station.  
Make sure that your base station is on.  
Reset your unit and restart handset  
registration.  
Move the base station as far away as  
possible from the electrical appliances.  
36  
Frequently asked questions  
 
I cannot change the settings of my  
voice mail  
idle mode automatically when you place  
the handset back on the base station.  
Operator voice mail is managed by  
your operator and not the phone itself.  
Please contact your operator should  
you want to change the settings.  
Phonebook entry cannot be stored  
and MEMORY FULL is displayed!  
Delete an entry to free memory  
before saving your contact again.  
Product behaviour  
The Master PIN code is wrong!  
The default master PIN is 0000.  
Keypad does not work!  
Unlock your keypad: Long press *in  
Reset the handset to revert to the default  
master PIN code if it has been changed  
before (see “Reset unit” on chapter 9.4).  
idle mode.  
The handset warms up when  
making a long call!  
This is a normal behavior. The handset  
consumes energy while calling.  
The handset cannot be registered to  
the base station!  
Maximum number of handsets (4) has  
been reached. To register a new  
handset, unregister an existing  
handset.  
Remove and replace the handset  
batteries.  
Try again by disconnecting and  
connecting the base station power  
supply and follow the procedure to  
register a handset (see “Registration”  
on chapter 9.2).  
Caller number is not displayed!  
Service is not activated: Check your  
subscription with your network  
operator.  
My handset keeps going into idle  
mode!  
If there are no key presses for 15  
seconds, the handset will automatically  
return to idle mode. It will also return to  
Frequently asked questions  
37  
 
12 Index  
A
I
Accessories 9  
Install battery 14  
Install phone 13  
Intercom 25  
Alarm 29  
Alarm tone 30  
Answer a call 19  
Answer an external call 25  
Auto hang-up 28  
K
Key tone 27  
Keypad lock/unlock 20  
C
Call in progress 20  
Call log 18, 23  
L
Language 28  
Charge battery 14  
Clock and alarm 29  
Conference call 25  
Connect base station 13  
LCD Backlight 35  
LED indicator 12  
Loudspeaker mode 20  
Loudspeaker volume 21  
D
M
Date and time 29  
Make a call 18  
Master PIN 31  
Menu structure 16  
Mute 20  
Default settings 34  
Delete a call list entry 24  
Delete a redial number 23  
Delete call list 24  
Delete phonebook 22  
Delete redial list 23  
Dial mode 33  
O
Overview of the base station 12  
Overview of your phone 10  
Direct dialling 18  
Display icons 12  
P
Phonebook 18, 21  
Predialling 18  
Prefix 32  
E
End a call 19  
H
R
Handset locating 26  
Handset name 27  
Recall time 33  
Recycle your batteries 7  
Redial list 18, 23  
Registration 31  
Reset unit 32  
Handset tones 27  
Handsfree answering 19  
Ring volume 27  
38  
Index  
 
S
Save a redial number 23  
Set area code 32  
Store a contact 21  
Switch handset on/off 20  
T
Text or number entry 20  
Tones Melody 27  
Transfer an external call 25  
U
Unmute 20  
Unregister 31  
V
Volume 20  
Index  
39  
 
 
© 2008 Koninklijke Philips Electronics N.V.  
All rights reserved  
Reproduction in whole or in part is prohibited without the  
written consent of the copyright owner  
P r i n t e d i n C h i n a  
Document number: 3111 285 42031  
 

Philips Iron GC4640i User Manual
Philips Surge Protector SPP1187WA User Manual
Philips TV Antenna 50PFL8956 User Manual
Philips TV Cables SWV6371 User Manual
Philips TV VCR Combo 14 PV 172 User Manual
Philips Universal Remote PM 4S 4 User Manual
Planet Technology Indoor Furnishings ICA 6CM User Manual
Poulan Snow Blower PP927ESA User Manual
Professional Series Iron PS74131 User Manual
PYLE Audio Car Video System PLTCDN7 User Manual