Philips Stereo System DCM3020 User Manual

Register your product and get support at  
DCM3020  
User Manual  
 
h Do not install near any heat sources  
such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers)  
that produce heat.  
1 Important  
i Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and  
the point where they exit from the  
apparatus.  
Safety  
j Only use attachments/accessories  
specified by the manufacturer.  
k Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
This ‘bolt of lightning’ indicates uninsulated  
material within your unit may cause an  
electrical shock. For the safety of everyone  
in your household, please do not remove  
product covering.  
The ‘exclamation point’ calls attention to  
features for which you should read the  
enclosed literature closely to prevent  
operating and maintenance problems.  
l Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
WARNING: To reduce the risk of fire or  
electric shock, this apparatus should not be  
exposed to rain or moisture and objects filled  
with liquids, such as vases, should not be  
placed on this apparatus.  
m Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus,  
the apparatus has been exposed to rain  
or moisture, does not operate normally,  
or has been dropped.  
CAUTION: To prevent electric shock, match  
wide blade of plug to wide slot, fully insert.  
a Read these instructions.  
b Keep these instructions.  
c Heed all warnings.  
n Battery usage CAUTION – To prevent  
battery leakage which may result in  
bodily injury, property damage, or  
damage to the remote control:  
d Follow all instructions.  
e Do not use this apparatus near water.  
f Clean only with dry cloth.  
Install all batteries correctly, + and -  
as marked on the remote control.  
g Do not block any ventilation openings.  
Install in accordance with the  
manufacturer’s instructions.  
4
EN  
 
Do not mix batteries (old and new  
or carbon and alkaline, etc.).  
Hearing safety  
Remove batteries when the remote  
control is not used for a long time.  
Listen at a moderate volume.  
Using headphones at a high volume can  
impair your hearing. This product can  
produce sounds in decibel ranges that  
may cause hearing loss for a normal  
person, even for exposure less than a  
minute. The higher decibel ranges are  
offered for those that may have already  
experienced some hearing loss.  
The batteries shall not be exposed  
to excessive heat such as sunshine,  
fire or the like.  
o Apparatus shall not be exposed to  
dripping or splashing.  
p Do not place any sources of danger on  
the apparatus (e.g. liquid filled objects,  
lighted candles).  
Sound can be deceiving. Over time your  
hearing ‘comfort level’ adapts to higher  
volumes of sound. So after prolonged  
listening, what sounds ‘normal’ can  
actually be loud and harmful to your  
hearing. To guard against this, set your  
volume to a safe level before your hearing  
adapts and leave it there.  
q Where the MAINS plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain  
readily operable.  
Warning  
Never remove the casing of this apparatus.  
Never lubricate any part of this apparatus.  
Never place this apparatus on other electrical  
equipment.  
Keep this apparatus away from direct sunlight,  
naked flames or heat.  
To establish a safe volume level:  
Set your volume control at a low setting.  
Slowly increase the sound until you can  
hear it comfortably and clearly, without  
distortion.  
Never look into the laser beam inside this  
Listen for reasonable periods of time:  
apparatus.  
Prolonged exposure to sound, even  
at normally ‘safe’ levels, can also cause  
hearing loss.  
Ensure that you always have easy access to the  
power cord, plug or adaptor to disconnect this  
apparatus from the power.  
Be sure to use your equipment  
reasonably and take appropriate breaks.  
Mains fuse  
Be sure to observe the following guidelines  
when using your headphones.  
This information applies only to products with  
a UK mains plug.  
Listen at reasonable volumes for  
reasonable periods of time.  
This product is fitted with an approved  
molded plug. If you replace the fuse, use one  
with:  
Be careful not to adjust the volume as  
your hearing adapts.  
Do not turn up the volume so high that  
you can’t hear what’s around you.  
the ratings shown on the plug,  
a BS 1362 approval, and  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations. Do not use headphones while  
operating a motorized vehicle, cycling,  
skateboarding, etc.; it may create a traffic  
hazard and is illegal in many areas.  
the ASTA approval mark.  
Contact your dealer if you are not sure about  
what type of fuse to use.  
Caution: To conform with the EMC directive  
(2004/108/EC), do not detach the plug from  
the power cord.  
EN  
5
 
Environmental information  
Notice  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
The making of unauthorized copies of  
copy-protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European Directive  
2002/96/EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
“Made for iPod,” “Made for iPhone,” and  
“Made for iPad” mean that an electronic  
accessory has been designed to connect  
specifically to iPod, iPhone, or iPad,  
respectively, and has been certified by the  
developer to meet Apple performance  
standards. Apple is not responsible for the  
operation of this device or its compliance  
with safety and regulatory standards. Please  
note that the use of this accessory with  
iPod, iPhone, or iPad may affect wireless  
performance.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment  
and human health.  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries. iPad  
is a trademark of Apple Inc.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
This apparatus includes this label:  
6
EN  
 
Note  
The type plate is located on the bottom of the  
apparatus.  
EN  
7
 
2 Your Micro  
System  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Introduction  
With this unit, you can enjoy audio from disc,  
USB devices, iPod players, iPhone and other  
external devices, or listen to radio stations.  
The unit offers Digital Sound Control (DSC)  
and Dynamic Bass Boost (DBB).  
The unit supports the following media formats:  
What’s in the box  
Check and identify the contents of your  
package:  
Main unit  
2 x Speakers  
Remote control  
FM antenna  
MP3 link cable  
Quick start guide  
User manual  
8 x Rubber stoppers for speakers  
8
EN  
 
Overview of the main unit  
Top and front view  
g
h
i
a
b
c
d e  
f
j
o
k
l
n
m
c
/
a
Skip to the previous/next track.  
Search within a track/disc/USB.  
Tune to a radio station.  
Turn on the unit, or switch to  
standby mode.  
b PRESET +/-  
Select a preset radio station.  
Skip to the previous/next album.  
Navigate through iPod/iPhone/iPad  
menu.  
EN  
9
 
Adjust time.  
j VOLUME + / -  
d
Adjust volume.  
Stop play.  
k Display panel  
Erase a program.  
Show current status.  
e SOURCE  
l Disc compartment  
m MP3-LINK  
Select a source: CD, FM TUNER,  
USB, DOCK, AUX IN, or MP3 LINK.  
Connect external audio device.  
f
n
Open/close the disc compartment.  
Headphone socket.  
g Dock for iPod/iPhone/iPad  
o STANDBY  
h
USB socket.  
i
Start or pause play.  
Back view  
d
c
a
b
a AUX IN  
Connect an external audio device.  
b SPEAKER OUT  
Connect the speakers.  
c AC MAIN~  
Power supply socket.  
d FM ANTENNA  
Improve FM reception.  
10 EN  
 
Search within a track/disc/USB.  
Overview of the remote  
control  
Navigate through iPod/iPhone/iPad  
menu.  
Adjust time.  
f OK  
a
g RDS  
Confirm a selection.  
b
c
d
e
For selected FM radio stations:  
display RDS information.  
s
h
Stop play or erase a program.  
Start or pause play.  
f
i
g
h
i
r
q
j VOL -/+  
Adjust volume.  
k Numeric keypad  
j
k
Select a track from a disc directly.  
Select a preset radio station.  
l REPEAT/SHUFFLE  
Play a track or all tracks repeatedly.  
l
m
p
o
n
m DBB  
Play tracks randomly.  
Turn on/off dynamic bass  
enhancement.  
n DSC  
Select a preset sound setting.  
a
o DIM  
Turn on the unit, or switch to  
standby mode, or switch to Eco  
Power standby.  
Adjust brightness of display panel.  
Turn off LED light around VOLUME  
knob.  
b SOURCE  
Select a source: CD, FM TUNER,  
p PROG  
Program tracks.  
USB, DOCK, AUX-IN, or MP3 LINK.  
Program radio stations.  
Mute or restore volume.  
c DISPLAY  
q
Select display information during play.  
d PRESET/ALBUM /  
r MENU  
Skip to the previous/next album.  
Access iPod/iPhone/iPad menu.  
Select a preset radio station.  
s SLEEP/TIMER  
e
/
Set the sleep timer.  
Set the alarm timer.  
Skip to the previous/next track.  
Tune to a radio station.  
EN 11  
 
3 Get started  
Connect FM antenna  
Tip  
Caution  
For optimal reception, fully extend and adjust  
the position of the antenna.  
Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
Connect the supplied FM antenna to the FM  
ANTENNA jack on the main unit.  
Always follow the instructions in this chapter in  
sequence.  
Connect power  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
rear of the apparatus.Write the numbers here:  
Caution  
Risk of product damage! Ensure that the power  
voltage corresponds to the voltage printed on  
the back or underside of the apparatus.  
Model No. __________________________  
Serial No. ___________________________  
Risk of electric shock! When you unplug the  
AC adaptor, always pull the plug from the  
socket. Never pull the cord.  
Connect speakers  
Before connecting the AC adaptor, ensure you  
have completed all other connections.  
Note  
Connect the power adaptor to:  
For optimal sound, use the supplied speakers  
only.  
Connect only speakers with impedance that is  
the same or higher than the supplied speakers.  
Refer to the Specifications section of this  
manual.  
the AC MAIN~ jack on the main  
unit.  
the wall outlet.  
AUX IN  
ANTENNA  
Insert the speaker wires completely into the  
speaker input sockets on the back of the unit.  
L
AC MAIN  
~
FM  
R
AC MAIN  
~
SPEAKER OUT  
R+  
R-  
L+  
L-  
12 EN  
 
Prepare the remote control  
Set clock  
1
In standby mode, press CLOCK/  
Caution  
DISPLAY on the remote control to  
activate the clock setting mode.  
» The hour digits are displayed and begin  
to blink.  
Risk of explosion! Keep batteries away from  
heat, sunshine or fire. Never discard batteries  
in fire.  
2
3
Press  
/
to set the hour.  
To insert the remote control battery:  
Press CLOCK/DISPLAY.  
» The minute digits are displayed and  
begin to blink.  
1
2
Open the battery compartment.  
Insert 2 AAA batteries with correct  
polarity (+/-) as indicated.  
4
5
Press  
/
to set the minute.  
3
Close the battery compartment.  
Press CLOCK/DISPLAY to confirm.  
a
Turn on  
Press .  
» The unit switches to the last selected  
source.  
b
Switch to standby  
Press again to switch the unit to standby  
mode.  
» The clock (if set) appears on the  
display panel.  
c
Switch to ECO standby mode:  
Press and hold for more than 3 seconds.  
» [ECO STANDBY] (Eco standby) is  
displayed for 3 seconds and then  
disappeared.  
Tip  
Note  
The unit switches to Eco Power Standby mode  
after 15 minutes in standby mode.  
If you are not going to use the remote control  
for a long time, remove the batteries.  
Do not use old and new or different types of  
Switch between standby mode and ECO  
standby mode:  
batteries in combination.  
Batteries contain chemical substances, so they  
should be disposed of properly.  
Press and hold for more than 2 seconds.  
EN 13  
 
4 Play  
Play iPod/iPhone/iPad  
When the iPod/iPhone/iPad is docked on this  
Micro System, you can listen to music from the  
speakers.  
Play a disc  
1
Press SOURCE repeatedly to select CD  
source.  
Note  
No audio output from the headphone jack in  
this situation.  
2
3
Press to open the disc compartment.  
Insert a disc with the printed side facing  
upward.  
Compatible iPod/iPhone/iPad  
4
5
Press to close the disc compartment.  
Play starts automatically.If not, press  
.
Apple iPod, iPhone and iPad models with a  
30-pin dock connector:  
iPod classic, iPod touch, iPod nano, iPod  
5th generation (video), iPod with color  
display, iPod mini.  
Play from USB  
Note  
iPhone, iPhone 3G, iPhone 3GS, iPhone 4.  
iPad (WiFi), iPad (3G).  
Ensure that the USB device contains playable  
audio content.  
Play an iPod/iPhone/iPad  
1
Insert the USB device into the  
socket.  
Note  
When an iPod/iPhone/iPad player is loaded,  
the unit switches to iPod source automatically.  
2
Press SOURCE repeatedly to select the  
USB source.  
1
2
Push to open the dock compartment.  
» Play starts automatically. If not, press  
.
Place the iPod/iPhone/iPad player in the  
dock. Press SOURCE repeatedly to select  
DOCK source.  
To select a folder, press PRESET +/-.  
To select an audio file, press  
/
.
14 EN  
 
» The connected iPod/iPhone/iPad plays  
Program radio stations manually  
automatically.  
To pause/resume play, press  
To skip to a track, press  
To search during play, press and hold  
, then release to resume normal play.  
.
You can program a maximum of 20 preset  
radio stations (FM).  
/
.
1
2
Tune to a radio station.  
/
Press PROG to activate program mode.  
» [PROG] (program) is displayed.  
Charge the iPod/iPhone/iPad  
3
4
Press PRESET +/- to allocate a number  
to this radio station, then press PROG to  
confirm.  
Note  
Repeat the above steps to program other  
stations.  
iPod with color display, iPod classic, and iPod with  
video are not compatible with dock charging.  
Tip  
When the unit is connected to power, the  
docked iPod/iPhone/iPad begins to charge.  
To overwrite a programmed station, store  
another station in its place.  
Listen to radio  
Tune to a radio station  
Select a preset radio station  
In tuner mode, press PRESET +/- to select a  
preset number.  
1
Press SOURCE repeatedly to select the  
tuner source.  
You can also press the numeric buttons  
to select a preset number directly.  
2
Press and hold  
seconds.  
/
for more than 2  
» [SEARCH] (search) is displayed.  
Tip  
» The radio tunes to a station with  
Position the antenna as far as possible from  
TV, VCR or other radiation source.  
strong reception automatically.  
For optimal reception, fully extend and adjust  
the position of the antenna.  
3
Repeat step 2 to tune to more stations.  
Tip  
To tune to a weak station, press  
/
Show RDS information  
repeatedly until you find optimal reception.  
RDS (Radio Data System) is a service that  
allows FM stations to show additional  
information. If you tune to an RDS station, an  
RDS icon and the station name are displayed.  
Program radio stations automatically  
You can program a maximum of 20 preset  
radio stations (FM).  
1
2
Tune to an RDS station.  
Press RDS repeatedly to scroll through  
the following information (if available):  
» Station name  
» Program type such as [NEWS] (news),  
[SPORT] (sport), [POP M] (pop  
music)...  
In the tuner mode, press and hold PROG for  
more than 2 seconds to activate automatic  
program mode.  
» AUTO SCAN (auto scan) is displayed.  
» All available stations are programmed in  
» RDS RT  
the order of waveband reception strength.  
» Frequency  
» The first programmed radio station is  
broadcast automatically.  
EN 15  
 
4
5
Repeat steps 2 to 3 to program more  
tracks.  
5 Play options  
Press  
to play the programmed tracks.  
» During play, [PROG] (program) is  
Pause/resume play  
displayed.  
To erase the program, in the stop  
position, press  
During play, press  
to pause/resume play.  
.
Skip to a track  
For CD:  
Display time  
Press DISPLAY to display time.  
Press  
/
to select another track.  
To select a track directly, you can  
also press a key on the numerical  
keypad.  
Tip  
In Eco Standby mode, time is displayed for 15  
minutes.  
For MP3 disc and USB:  
1
Press PRESET +/-to select an album or a  
folder.  
Select repeat/shuffle play  
options  
2
Press  
/
to select a track or a file.  
1
During play, press REPEAT/SHUFFLE  
repeatedly to select a repeat option or  
the shuffle play mode.  
Search within a track  
1
2
During play, press and hold  
/
.
REP: the current track is played  
repeatedly.  
Release to resume normal play.  
REP ALL: all tracks are played  
repeatedly.  
Program tracks  
REP ALB: all tracks in this album are  
played repeatedly.  
Note  
SHUF: all tracks are played randomly.  
You can program tracks only when the play  
stops.  
2
To resume normal play, press  
REPEAT/SHUFFLE repeatedly until no  
option is displayed.  
You can program a maximum of 20 tracks.  
1
Press PROG to activate the program  
mode.  
» [PROG] (program) is displayed.  
2
3
For MP3/WMA tracks, press PRESET +/-  
to select an album.  
Press  
/
to select a track, then press  
PROG to confirm.  
16 EN  
 
6 Adjust sound  
Adjust volume  
During play, press VOL +/- to increase/decrease  
the volume.  
Select a preset sound effect  
During play, press DSC repeatedly to select:  
[ROCK] (rock)  
[JAZZ] (jazz)  
[CLASSIC] (classic)  
[POP] (pop)  
Enhance bass  
During play, press DBB to turn on or off  
dynamic bass enhancement.  
» If DBB is activated, DBB is displayed.  
Mute sound  
During play, press to mute/unmute sound.  
EN 17  
 
Activate and deactivate the alarm  
timer  
7 Other features  
Press TIMER repeatedly to activate or  
deactivate the timer.  
Set the sleep timer  
This unit can switch to standby automatically  
after a set period of time.  
» If the timer is activated, the display  
shows  
.
» If the timer is deactivated,  
When the unit is turned on, press SLEEP  
repeatedly to select a set period of time (in  
minutes).  
disappears on the display.  
Note  
» When sleep timer is activated, the  
display shows [SLEEP](sleep)  
.
If DISC/USB/iPhone/iPod/iPad source is  
selected and the track cannot be played, tuner  
is activated automatically.  
To deactivate sleep timer  
Press SLEEP repeatedly until “OFF” is displayed.  
» When sleep timer is deactivated,  
[SLEEP](sleep) disappears on the  
display.  
Play from external audio  
device  
Set the alarm timer  
This unit can be used as an alarm clock.The  
DISC,TUNER, USB or iPhone/iPod/iPad is  
activated to play at a preset time.  
You can play from an external audio device  
such as MP3 player through this unit.  
1
Connect the audio device.  
For audio device with red/white  
audio output sockets:  
1
Ensure that you have set the clock  
correctly.  
Connect a red/white audio cable  
(not supplied) to the AUX-IN  
sockets and to the audio output  
sockets on the audio device.  
2
3
4
Press and hold TIMER.  
Press SOURCE to select a source.  
Press TIMER to confirm.  
» The hour digits are displayed and begin  
to blink.  
For audio device with headphone  
sockets:  
Connect the supplied MP3-Link  
cable to the MP3-LINK socket and  
to the headphone socket on the  
audio device.  
5
6
Press  
/
to set the hour.  
Press TIMER to confirm.  
» The minute digits are displayed and  
begin to blink.  
2
3
Press SOURCE to select MP3-  
LINK/AUX-IN source.  
7
8
Press  
/
to set the minute.  
Play the device.  
Press TIMER to confirm.  
» The timer is set and activated.  
Adjust display brightness  
Press DIM repeatedly to select different levels  
of display brightness:  
High brightness  
Mid brightness  
Low brightness  
18 EN  
 
General information  
8 Product  
information  
AC power  
220-240V ~ 50/60 Hz  
Operation Power  
Consumption  
60 W  
Standby Power  
Consumption  
Eco Power Standby < 0.5 W  
Power Consumption  
USB Direct  
Dimensions  
< 12 W  
Note  
Product information is subject to change  
without prior notice.  
Version 1.1  
- Main Unit (W x H 239 x 141.5 x 230 mm  
x D)  
Specifications  
Amplifier  
- Speaker  
Weight  
142 x 307 x 230 mm  
Total output power 2 x 60 W RMS  
- Main Unit  
- Speaker  
- Package  
1.92 kg  
Frequency  
response  
80 Hz - 16 kHz, ± 3 dB  
2.55 kg x 2  
1.8 kg  
Signal to noise ratio > 60 dB  
MP3 link input  
0.5 V RMS 20 k  
USB playability information  
Compatible USB devices:  
Disc  
Laser type  
Disc diameter  
Support disc  
Semiconductor  
12 cm /8 cm  
CD-DA, CD-R,  
CD-RW, MP3-CD,  
WMA-CD  
24 Bits / 44.1 kHz  
< 1.5%  
USB flash memory (USB 1.1)  
USB flash players (USB 1.1)  
memory cards (requires an additional  
card reader to work with this unit)  
Supported formats:  
Audio DAC  
Total harmonic  
distortion  
Frequency  
response  
Signal to noise ratio > 55 dBA  
USB or memory file format FAT12,  
FAT16, FAT32 (sector size: 512 bytes)  
MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
60 Hz -16 kHz  
(44.1 kHz)  
WMA v9 or earlier  
Directory nesting up to a maximum of 8  
levels  
Number of albums/ folders: maximum 99  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 to v2.3  
Tuner  
Tuning range  
Tuning grid  
Number of presets  
FM: 87.5 - 108 MHz  
50 KHz  
20  
File name in Unicode UTF8 (maximum  
length: 16 bytes)  
Speakers  
Speaker impedance  
2 x 60 W, 4 OHM  
EN 19  
 
Supported MP3 disc formats  
ISO9660, Joliet  
Maximum title number: 999 (depending  
on file name length)  
Maximum album number: 99  
Supported sampling frequencies: 32 kHz,  
44.1 kHz, 48 kHz  
Supported Bit-rates: 32~320 (kbps),  
variable bit rates  
Maintenance  
Clean the cabinet  
Use a soft cloth slightly moistened with  
a mild detergent solution. Do not use  
a solution containing alcohol, spirits,  
ammonia or abrasives.  
Clean discs  
When a disc becomes dirty, clean it with  
a cleaning cloth. Wipe the disc from the  
centre out.  
Do not use solvents such as benzene,  
thinner, commercially available cleaners,  
or antistatic spray intended for analogue  
records.  
Clean the disc lens  
After prolonged use, dirt or dust may  
accumulate at the disc lens. To ensure  
good play quality, clean the disc lens  
with Philips CD lens cleaner or any  
commercially available cleaner. Follow the  
instructions supplied with cleaner.  
20 EN  
 
Reduce the distance between the remote  
control and the unit.  
9 Troubleshooting  
Insert the battery with its polarities (+/–  
signs) aligned as indicated.  
Replace the battery.  
Warning  
Aim the remote control directly at the  
sensor on the front of the unit.  
Never remove the casing of this apparatus.  
No disc detected  
To keep the warranty valid, never try to repair  
the system yourself.  
Insert a disc.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/welcome).When you contact  
Philips, ensure that the apparatus is nearby  
and the model number and serial number are  
available.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at  
the lens has cleared.  
Replace or clean the disc.  
Use a finalized CD or correct format disc.  
Cannot display some files in USB device  
The number of folders or files in the USB  
device has exceeded a certain limit. This  
phenomenon is not a malfunction.  
No power  
Ensure that the AC power cord of the  
unit is connected properly.  
The formats of these files are not  
supported.  
Ensure that there is power at the AC  
outlet.  
USB device not supported  
As a power-saving feature, the system  
switches off automatically 15 minutes  
after track play reaches the end and no  
control is operated.  
The USB device is incompatible with the  
unit. Try another one.  
Poor radio reception  
Increase the distance between the unit  
and your TV or VCR.  
No sound or poor sound  
Adjust the volume.  
Fully extend the FM antenna.  
Disconnect the headphones.  
Connect an outdoor FM antenna instead.  
Check that the speakers are connected  
correctly.  
Timer does not work  
Check if the stripped speaker wires are  
clamped.  
Set the clock correctly.  
Switch on the timer.  
No response from the unit  
Clock/timer setting erased  
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
Power has been interrupted or the power  
cord has been disconnected.  
As a power-saving feature, the system  
switches off automatically 15 minutes  
after track play reaches the end and no  
control is operated.  
Reset the clock/timer.  
Remote control does not work  
Before you press any function button,  
first select the correct source with the  
remote control instead of the main unit.  
21  
 
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
DCM3020_UM_12_Book 1_V3.0  
 

Paxar Printer TC941XQR User Manual
Pelco Home Security System C3468M User Manual
Perle Systems Network Card S 110P User Manual
Philips Clock Radio AJ3190 11 User Manual
Philips DVD Player PET824 User Manual
Philips Indoor Furnishings P 5805 F User Manual
Pioneer CD Player DEH 5000UB User Manual
Polaroid Portable DVD Player PDU 0832DS User Manual
Poulan Chainsaw PP300E User Manual
ProScan Flat Panel Television PLCD5085A User Manual