Always there to help you
Register your product and get support at
AEA2000
Question?
Contact
Philips
User Manual
1 Important
2 Your Bluetooth
Adapter
•
•
•
•
Read these instructions.
Follow all instructions.
Do not use this apparatus near water.
Do not place near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Introduction
By connecting the Bluetooth adapter to your
Hi-Fi speaker system, you can enjoy audio from
your Bluetooth-enabled device on your Hi-Fi
system through Bluetooth wireless connection.
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
•
•
What's in the box
Check and identify the contents of your
package:
•
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
•
•
•
•
Main unit
AC power adaptor
RCA audio cable
User manual
•
•
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
•
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Never remove the casing of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
3
EN
3 Play
Connect power
Caution
Always follow the instructions in this chapter in
sequence.
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! Hold the plug securely when
unplugging the device.
Connect audio cables
There are two ways to connect the Bluetooth
adaptor to your Hi-Fi system. Select one fit for
the Hi-Fi system.
Note
• The type plate is located on the bottom of the
Bluetooth adaptor.
Option 1 (Fig.A)
Connect the power adaptor to:
•
the DC IN socket at the back of the
Bluetooth adapter.
•
the wall outlet.
R
L
AUDIO IN
Option 2 (Fig. B)
Enter pairing mode
When connected to power, the Bluetooth
adaptor goes to Bluetooth pairing mode
automatically.
LINE OUT
R
L
•
If your Bluetooth device has not been
paired with the Bluetooth adapter before,
you need pair with the Bluetooth adapter
first, then play audio on the device (See
the section “Play from Bluetooth-enabled
devices”).
EN
4
•
If your Bluetooth device has been paired
with the Bluetooth adapter before, press .
2 When [PhilipsBT] (Philips Bluetooth
adapter) is displayed on your device,
select it to start pairing and connection. If
necessary, enter default password “0000”.
» If connection is successful, the
Bluetooth indicator becomes solid
blue.
» The Bluetooth adapter attempts to connect
the previously connected Bluetooth device.
If it fails, the adapter returns to the pairing
mode.
3 Play audio on your device.
» Audio streams from your device to
your Hi-Fi system.
Tip
• If the Bluetooth adapter fails to pair with a Bluetooth
device, the Bluetooth adapter exits the pairing mode
in 2 minutes, and the LED light becomes dim.You can
press to return to pairing mode.
Note
LED
indications
Solid blue
Description
• If your Bluetooth device has been paired with AEA2000
before, you just need to find out [PhilipsBT] on your
Bluetooth menu, then start the connection.
• This Bluetooth adaptor can memorize up to 8
previously paired devices.
The Bluetooth adapter and your
Bluetooth-enabled device are
connected.
Flashing
blue
The Bluetooth adapter is waiting
to be paired with a Bluetooth-
enabled device.
The Bluetooth adapter is neither
in connection with a Bluetooth
device nor in the pairing mode.
To disconnect the Bluetooth-enabled device:
•
•
Press again;
Tap [PhilipsBT] on the Bluetooth menu
again;
Dim light
•
•
Deactivate Bluetooth function on your
device; or
Move the device beyond the
communication range.
To connect another Bluetooth device:
Play from Bluetooth-enabled
devices
1 Disconnect the previously connected
device.
2 Pair with your selected Bluetooth device.
Note
To clear pairing history in the Bluetooth
adapter:
Press and hold for 7 seconds.
» The Bluetooth indicator stays in solid blue
for 2 seconds, then returns to the previous
status.
• The effective operating range between the Bluetooth
adapter and the paired device is approximately 10
meters (30 feet).
• Keep this Bluetooth adapter away from other electronic
devices that may cause interference.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Make sure that the Bluetooth adapter is connected to
the powered Hi-Fi system correctly.
• Make sure that your Hi-Fi system is in Audio-in or
line-in mode.
1 On your Bluetooth device, turn on
Bluetooth function and search for
Bluetooth devices (refer to the device's
user manual).
5
EN
4 Product
information
5 Troubleshooting
Warning
• Never remove the casing of this device.
Note
• Product information is subject to change without prior
notice.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support).When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
Specifications
Amplifier
OutputVoltage
Signal to Noise Ratio
Total Harmonic Distortion
1000 mV RMS
> 62 dBA
< 2 %
No power
•
Make sure that the AC power adapter is
connected properly.
•
Make sure that there is power at the AC
outlet.
Bluetooth
Standard
Bluetooth StandardVersion
2.1+EDR
No sound from your Hi-Fi system
•
•
•
•
•
Check if the Hi-Fi system is connected to
power.
Make sure that the system is connected
with the Bluetooth adapter properly.
Make sure that the Bluetooth wireless
connection is successful.
Adjust the volume of your system and
Bluetooth device.
Make sure that the Hi-Fi system is in
Audio-in or line-in mode.
Frequency Band 2.402~2.480 GHzISM Band
Range 10m (free space)
General information
AC Power
Model:AS030-090-
EE033/EML0900330V
(Philips);
Input: 100-240V ~,
50/60 Hz, 0.15 A;
Output: 9V 0.33 A
Operation Power
Consumption
About Bluetooth device
< 3 W
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit
The audio quality is poor after connection
with a Bluetooth-enabled device.
74 x 28 x 72 mm
0.04 kg
•
The Bluetooth reception is poor. Move the
device closer to the Bluetooth adaptor or
remove any obstacle between the device
and the adaptor.
EN
6
Cannot connect with the device.
6 Notice
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The adapter is already connected with
another Bluetooth-enabled device.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
•
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
•
The Bluetooth reception is poor. Move the
device closer to the Bluetooth adapter or
remove any obstacle between the device
and the adapter.
This product complies with the radio
interference requirements of the European
Community.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at
•
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
7
EN
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
2013 © WOOX Innovations Limited.All rights
reserved.
Specifications are subject to change without
notice.WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
EN
8
Specifications are subject to change without notice.
2013 ©WOOX Innovations Limited.All rights reserved.
This product was brought to the market by WOOX
Innovations Limited or one of its affiliates, further
referred to in this document asWOOX Innovations, and
is the manufacturer of the product.WOOX Innovations
is the warrantor in relation to the product with which
this booklet was packaged. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V.
AEA2000_12_UM_V3.0
|