Philips Speaker System Active Speaker System User Manual

Set up  
Connect  
1
2
Finding the viewing channel  
Connect the speakers and  
subwoofer  
Connect the various coloured plugs from the speakers  
and subwoofer to the same coloured sockets at the rear  
of the DVD system.  
Connect the DVD system to TV  
Placement  
Proper speakers system placement is important to  
ensure optimum sound performance.  
A
C
D
A
Television ( rear)  
A Press STANDBY ON on the DVD system.  
VIDEO IN  
(CVBS)  
B Press SOURCE on the DVD system until “DISC”  
appears on the display panel.  
VIDEO IN  
(CVBS)  
To off-air  
antenna or  
set-top box  
CENTER  
D
C
D
A
C
B
SUB-  
WOOFER  
REAR  
LEFT  
FRONT  
LEFT  
REAR  
RIGHT  
FRONT  
RIGHT  
DVD System (rear)  
C Turn on the TV. Use the TV’s remote control to  
Pr  
Y
select the correct viewing channel for the DVD  
system.  
Pb  
You should see the blue DVD background on the  
TV.  
A Place the centre speaker above or close to the TV.  
Note To search for the correct viewing channel,  
press the Channel Down button on the TV’s remote  
control repeatedly (or AV, SELECT, ° button) until  
you see the blue DVD background.  
B Place the subwoofer on the floor, at least one metre  
A Use the supplied composite video cable to connect  
the CVBS socket on this DVD system to the  
VIDEO IN socket on your TV.  
away from the TV.  
C Place the front speakers at equal disctances from the  
TV.  
B Plug in the power cable from the DVD system to an  
DVD System (rear)  
AC power outlet.  
D Place the rear speakers at normal listening ear level.  
Select the display language on the  
screen  
Note It is important to connect the DVD system  
directly to your TV.  
B
Connect the radio antennas  
Keep the antennas away from the electronic devices to  
prevent unwanted interference.  
B
A Press SETUP.  
The { General Setup Page } appears.  
Connect the audio from TV to DVD  
system (optional)  
To hear the TV audio through this home theatre system,  
use the red and white audio cables (not supplied) to  
connect the TV IN (R/L) sockets on this DVD system to  
the AUDIO output sockets on your TV.  
E
A
General Setup Page  
Disc Lock  
Display Dim  
Program  
OSD Language  
Screen Saver  
DivX(R) VOD Code  
English  
Espanõl  
Brazil Por  
DVD System (rear)  
Television ( rear)  
AUDIO  
OUT  
B Press T to select { OSD Language } and press X.  
AUDIO OUT  
AUDIO  
OUT  
C Use TS keys to select a language option in the  
menu and press OK to confirm.  
AUDIO IN  
D Press SETUP to exit.  
C
B
b
Note The language set here is only for the menus that  
are shown on the TV while operating this DVD system,  
not for the DVD disc menu.  
A Connect the FM antenna to the FM socket. Extend  
the wire and fix its end to the wall.  
There are various setup options (Audio Setup, Video  
Setup, Preference Setup) available on this DVD system.  
Refer to the user manual for more information.  
DVD System (rear)  
B Unfold the AM/MW loop antenna and fix the claw  
into the slot.  
Note Press TV on the remote control to get the  
sound output from the speakers system when watching  
the TV programme.  
C Push the tabs and insert the wires into the AM/MW  
sockets.  
 

Peavey Music Mixer XM 4 User Manual
Peavey Portable Speaker 1208 4sps BWX User Manual
PeerCall Network Card USB Adaptor User Manual
Pelco DVR DX3009 060 User Manual
Philips All in One Printer SFF 6135D User Manual
Philips Flat Panel Television FTR 9965 12 User Manual
Pioneer DJ Equipment Active Reference Monitor User Manual
Pioneer DVD Player DV S969AVi User Manual
Pioneer Home Theater System PDP S62 User Manual
Poulan Trimmer 530163516 User Manual