Philips Portable DVD Player PET716
Quick start guide
1
2
2
Enjoy (Disc operation)
Enjoy (AV OUT)
Charge your battery
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
Connecting additional equipment (TV for
example)
1 Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown
directly.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in
the power-off mode).
2 Switch on the TV and set to the correct video-
in channel.
;
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio andVideo
inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜ The CHG indicator turns red .
➜ When the battery is fully charged, the
indicator turns off.
1 Open the lid of the player.
2 Slide the POWER switch to ON to switch on
the DVD player.
➜ The POWER indicator turns on.
;
TV
White
3 Press OPEN to open the disc door.
Not supplied
AUDIO IN
Red
4 Remove the protective card (if any) and load a
disc with the label side facing up.
Yellow
VIDEO IN
3 Disconnect the power adaptor cord (or the
car adaptor) when the CHG indicator turns
off.
5 Close the disc door. Playback will start
automatically. If not, press 2;.
6 To stop playback, press 9.
Notes:
Note:
–You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
– Once the battery is fully discharged, immediately
recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the
battery life.When the power is low, the battery icon
will be shown on the upper-left corner of theTFT
for warning.
Printed in China
WK0805
|