Philips Headphones AE2012 User Manual

Rwewgiswte.rpyhoiulirppsr.coodumct/wanedlgceotmsuepport at  
AE2012  
User manual  
 
#ꢀ Do not turn up the volume so high that you can’t hear what’s  
around you.  
#ꢀ You should use caution or temporarily discontinue use in potentially  
hazardous situations. Do not use headphones while operating a  
ꢁꢂꢃꢂꢄꢅꢆꢇꢈꢀꢉꢇꢊꢅꢋꢌꢇꢍꢀꢋꢎꢋꢌꢅꢏꢐꢍꢀꢑꢒꢓꢃꢇꢔꢂꢓꢄꢈꢅꢏꢐꢍꢀꢇꢃꢋꢕꢖꢀꢅꢃꢀꢁꢓꢎꢀꢋꢄꢇꢓꢃꢇꢀꢓꢀꢃꢄꢓꢗ\ꢋꢀ  
hazard and is illegal in many areas.  
Where the mains plug or an appliance coupler is used as the disconnect  
device, the disconnect device shall remain readily operable.  
Warning  
# Never remove the casing of this unit.  
# Never lubricate any part of this unit.  
# ꢘꢌꢓꢋꢇꢀꢃꢊꢅꢑꢀꢙꢏꢅꢃꢀꢂꢏꢀꢓꢀ]ꢓꢃꢍꢀꢊꢓꢄꢈꢀꢓꢏꢈꢀꢑꢃꢓꢔꢌꢇꢀꢑꢙꢄꢗꢓꢋꢇꢕ  
# Never place this unit on other electrical equipment.  
# ꢚꢇꢇ!ꢀꢃꢊꢅꢑꢀꢙꢏꢅꢃꢀꢓ"ꢓꢎꢀꢗꢄꢂꢁꢀ"ꢓꢃꢇꢄꢍꢀꢁꢂꢅꢑꢃꢙꢄꢇꢀꢓꢏꢈꢀꢌꢅ#ꢙꢅꢈ$\ꢌꢌꢇꢈꢀꢂꢔ%ꢇꢋꢃꢑꢕ  
# ꢚꢇꢇ!ꢀꢃꢊꢅꢑꢀꢙꢏꢅꢃꢀꢓ"ꢓꢎꢀꢗꢄꢂꢁꢀꢈꢅꢄꢇꢋꢃꢀꢑꢙꢏꢌꢅꢐꢊꢃꢍꢀꢏꢓꢒꢇꢈꢀ]ꢓꢁꢇꢑꢀꢂꢄꢀꢊꢇꢓꢃꢕꢀ  
Notice  
&ꢏꢎꢀꢋꢊꢓꢏꢐꢇꢑꢀꢂꢄꢀꢁꢂꢈꢅ\ꢋꢓꢃꢅꢂꢏꢑꢀꢁꢓꢈꢇꢀꢃꢂꢀꢃꢊꢅꢑꢀꢈꢇꢉꢅꢋꢇꢀꢃꢊꢓꢃꢀꢓꢄꢇꢀꢏꢂꢃꢀꢇ'!ꢄꢇꢑꢑꢌꢎꢀ  
approved by Philips Consumer Lifestyle may void the user’s authority to  
operate the equipment.  
This product complies with the radio interference requirements of the  
European Community.  
Your product is designed and manufactured with high quality materials  
 
and components, which can be recycled and reused.  
When this crossed-out wheeled bin symbol is attached to a product it  
means that the product is covered by the European Directive 2002/96/EC.  
Please inform yourself about the local separate collection system for  
electrical and electronic products.  
Please act according to your local rules and do not dispose of your old  
products with your normal household waste. Correct disposal of your  
old product helps to prevent potential negative consequences for the  
environment and human health.  
Environmental information  
All unnecessary packaging has been omitted.We have tried to make  
the packaging easy to separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags, protective foam  
sheet.)  
Your system consists of materials which can be recycled and reused  
if disassembled by a specialized company. Please observe the local  
regulations regarding the disposal of packaging materials, exhausted  
batteries and old equipment.  
2
Your FM/DAB radio  
Congratulations on your purchase, and welcome to Philips!To fully  
ꢔꢇꢏꢇ\ꢃꢀꢗꢄꢂꢁꢀꢃꢊꢇꢀꢑꢙ!!ꢂꢄꢃꢀꢃꢊꢓꢃꢀꢘꢊꢅꢌꢅ!ꢑꢀꢂꢗꢗꢇꢄꢑꢍꢀꢄꢇꢐꢅꢑꢃꢇꢄꢀꢎꢂꢙꢄꢀ!ꢄꢂꢈꢙꢋꢃꢀꢓꢃꢀ  
Introduction  
With this unit, you can enjoy both FM radio and Digital Audio  
Broadcasting (DAB) radio.  
Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally  
through a network of transmitters. It provides you with more choice,  
better sDoouwnndloaqdufraolmityWawnwd.Smomoarneuailns.fcoormm. AaltliMoann.uals Search And Download.  
What’s in the box  
Check and identify the contents of your package:  
#ꢀ Main unit  
#ꢀ AC adaptor  
#ꢀ User manual  
Overview of the main unit  
a
b
c
d e f g  
h
i
 
m
l
k
j
a
b
c
#ꢀ Jack for the headphone.  
#ꢀ Turn on or off the unit.  
SELECT  
#ꢀ Display DAB station information.  
#ꢀ +ꢂꢏ\ꢄꢁꢀ3&4ꢀꢑꢃꢓꢃꢅꢂꢏꢀꢑꢇꢌꢇꢋꢃꢅꢂꢏꢕ  
#ꢀ +ꢂꢏ\ꢄꢁꢀꢁꢇꢏꢙꢀꢑꢇꢌꢇꢋꢃꢅꢂꢏꢕ  
d
e
TUNING +/-  
#ꢀ Tune to an FM station.  
#ꢀ Navigate DAB station list.  
#ꢀ Navigate FM/DAB menu.  
1 - 5+  
 
#ꢀ Numeric keypads: Set/select a preset radio station.  
f
g
Display panel  
#ꢀ Display current status.  
MENU/SCAN  
#ꢀ Select DAB/FM menu option.  
#ꢀ Scan DAB radio stations.  
h
i
VOL+/-  
#ꢀ Adjust volume.  
FM/DAB  
#ꢀ Select DAB or FM radio.  
j
k
Battery compartment door  
FM/DAB antenna  
#ꢀ Improve FM/DAB reception.  
l
m
PULL FOR STAND (Retractable stand)  
#ꢀ Provide stand support.  
DC IN  
#ꢀ Jack for the AC adaptor(supplied).  
3
Get started  
Always follow the instructions in this chapter in sequence.  
If you contact Philips, you will be asked for the model and serial number  
of this apparatus.The model number and serial number are on the back  
of the apparatus.Write the numbers here:  
Model No. __________________________  
Serial No. ___________________________  
 
Place the radio  
5ꢀ!ꢌꢓꢋꢇꢀꢃꢊꢇꢀꢙꢏꢅꢃꢀꢂꢏꢀꢓꢀ]ꢓꢃꢍꢀꢑꢃꢓꢔꢌꢇꢀꢑꢙꢄꢗꢓꢋꢇꢍꢀ!ꢙꢌꢌꢀꢂꢙꢃꢀꢃꢊꢇꢀꢄꢇꢃꢄꢓꢋꢃꢓꢔꢌꢇꢀꢑꢃꢓꢏꢈꢀ  
from bottom of the unit at back-side.  
Prepare FM/DAB antenna  
For optimal reception, fully extend and adjust the position of the FM/  
DAB antenna.  
Tip  
# Position the antenna as far away as possible from yourTV,VCR or other  
radiation source to prevent interference.  
Connect power  
You can use this radio player on AC power or battery power.  
Battery Life (Approx. hours)  
When using  
FM  
8
DAB  
8
alkaline R6 (size AA)  
 
Option 1:AC power  
Caution  
# Risk of product damage! Ensure that the power supply voltage corresponds to  
the voltage printed on the back or the underside of the product.  
# Risk of electric shock! When you unplug the AC adaptor, always pull the plug  
from the socket. Never pull the cord.  
# 7ꢑꢇꢀꢂꢏꢌꢎꢀꢃꢊꢇꢀ&+ꢀꢓꢈꢓ!ꢃꢂꢄꢀꢑ!ꢇꢋꢅ\ꢇꢈꢀꢔꢎꢀꢃꢊꢇꢀꢁꢓꢏꢙꢗꢓꢋꢃꢙꢄꢇꢄꢀꢂꢄꢀꢑꢂꢌꢈꢀ"ꢅꢃꢊꢀꢃꢊꢅꢑꢀꢙꢏꢅꢃꢕ  
Note  
# The type plate is located on the back of the apparatus.  
1 Connect one end of the AC adaptor to the DC socket on the main  
unit.  
2 Connect the other end of the AC adaptor to the wall outlet.  
 
Option 2: Battery power  
Caution  
# ;ꢅꢑꢒꢀꢂꢗꢀꢇ'!ꢌꢂꢑꢅꢂꢏ<ꢀꢚꢇꢇ!ꢀꢔꢓꢃꢃꢇꢄꢅꢇꢑꢀꢓ"ꢓꢎꢀꢗꢄꢂꢁꢀꢊꢇꢓꢃꢍꢀꢑꢙꢏꢑꢊꢅꢏꢇꢀꢂꢄꢀ\ꢄꢇꢕꢀ=ꢇꢉꢇꢄꢀ  
ꢈꢅꢑꢋꢓꢄꢈꢀꢔꢓꢃꢃꢇꢄꢅꢇꢑꢀꢅꢏꢀ\ꢄꢇꢕ  
# Do not mix batteries (old and new or carbon and alkaline, etc.).  
# Remove batteries if they are exhausted or if the unit is not to be used for a  
long time.  
1 Open the battery compartment at the back of the unit.  
2 Insert 6 R6/UM-3/AA size batteries (not supplied) with correct  
polarity (+/-) as indicated, then close the battery compartment.  
3 The unit is ready to operate.  
Tip  
# “Battery low’ message is shown when the battery power is low. Change  
batteries to ensure normal operation.  
 
Note  
# Batteries contain chemical substances, so they should be disposed of properly.  
Turn on  
1 Press .  
» The unit switches to the last selected source.  
To turn off the unit:  
1 Press again.  
Adjust the volume level  
1 During play, press VOL+/-to increase/decrease the volume level.  
4
Listen to FM radio  
Tune to FM radio  
1 Press DAB/FMrepeatedly to select FM radio.  
2 Press TUNING +/- to tune to a radio station.  
Search FM radio stations  
1 Tune to FM radio.  
2 Press and hold TUNING +/- for more than two seconds to start  
searching stations.  
» The FM tuner tunes to a station with strong reception  
automatically.  
3ꢀ ;ꢇ!ꢇꢓꢃꢀꢑꢃꢇ!ꢀ@ꢀꢅꢗꢀꢏꢇꢋꢇꢑꢑꢓꢄꢎꢀꢙꢏꢃꢅꢌꢀꢎꢂꢙꢀ\ꢏꢈꢀꢃꢊꢇꢀꢈꢇꢑꢅꢄꢇꢈꢀꢑꢃꢓꢃꢅꢂꢏꢕ  
 
Store FM stations manually  
You can program a maximum of 10 preset FM radio stations.  
1 Tune to your desired FM station.  
2 To preset number 1 - 5, press and hold the numeric keypad 1 - 5 for two  
seconds;  
To select the preset number 6 - 10, press and hold the numeric  
keypads 5+ simultaneously with other keypad (e.g. 5+ with 1 for 6;  
5+ with 5 for 10) for two seconds.  
» The preset number of the saved station appears.  
Note  
# To overwrite a preset station, store another station in its place.  
Select a preset FM radio station  
1 Press DAB/FMrepeatedly to select FM radio.  
2 Press numeric keypads to select a preset number.  
Note  
# If you want to select a preset number 6-10, press and hold 5+ and then press  
corresponding number key.(For example, if you want to select 6, press and  
hold 5+ and then press 1.)  
Use FM menu  
1 In FM mode, press MENU/SCAN to enter the FM menu.  
 
2 Press TUNING +/- to scroll the menu options:  
#ꢀ [Audio setting]  
#ꢀ [System]  
3 To select an option, press SELECT.  
4 Repeat step 2-3 if sub-option is available under one option.  
[Audio setting]  
This function enables you to select mono or stereo  
#ꢀ [Forced mono] Select mono broadcast.  
#ꢀ [Stereo allowed] Select stereo broadcast.  
[System]  
#ꢀ [Factory reset] Resets all the settings of this radio player to factory  
default.  
#ꢀ [SW version] Software version of the radio player is shown.  
Note  
# If no button is pressed within 15 seconds, the menu exits.  
5
Listen to DAB radio  
Tune to DAB radio  
Kꢊꢇꢏꢀꢎꢂꢙꢀꢇꢏꢃꢇꢄꢀꢃꢊꢇꢀ3&4ꢀꢁꢂꢈꢇꢀꢗꢂꢄꢀꢃꢊꢇꢀ\ꢄꢑꢃꢀꢃꢅꢁꢇꢍꢀꢃꢊꢇꢀꢄꢓꢈꢅꢂꢀ!ꢌꢓꢎꢇꢄꢀ  
automatically scans DAB radio stations.Then station list is retained in  
memory so the next time the radio player is switched on, the station  
scan does not take place.  
1 Press DAB/FMrepeatedly to select DAB radio.  
» A bar graph indicates the progress of the search and the number  
of stations found increase as the scan progresses.  
 
Number of  
Stations found  
Progress bar  
A When scan is completed, the stations are listed in numerical then  
alphabetic order.  
»
First available station is played.  
B If there is no DAB coverage currently available  
»
“No DAB Station” is displayed.  
Change the location or adjust antenna.  
Press SELECT to scan again.  
a
b
Change DAB station  
1 Tune to a DAB station.  
2 Use TUNING +/- to navigate through available stations.  
3 Press SELECT to choose a station.  
Scan DAB radio stations  
1 When playing a DAB station, or the current station is not available,  
press and hold MENU/SCAN for more than two seconds.  
» The radio player scans all available DAB radio stations and  
broadcasts the current station.  
 
Tip  
# New stations and services will be added in the DAB broadcast.To make  
new DAB stations and services available on your radio player, do scan on a  
regular base.  
Display station information  
1 Tune to a DAB radio station.  
2 Press SELECT repeatedly to scroll through the following information  
(if available):  
» Dynamic label segment (DLS)  
» Program type (PTY)  
» Ensemble Name  
» Channel and frequency  
» Signal error rate  
» Bit rate and audio status  
» Time  
» Date  
Store DAB stations manually  
You can store a maximum of 10 preset DAB radio stations.  
1 Tune to your desired DAB station.  
2 To preset number 1 - 5, press and hold the numeric keypad 1 - 5 for  
two seconds;  
To select the preset number 6 - 10, press and hold the numeric  
keypads 5+ simultaneously with other keypad (e.g. 5+ with 1 for 6;  
5+ with 5 for 10) for two seconds.  
» The preset number of the saved station appears.  
 
Note  
# To overwrite a preset station, store another station in its place.  
Select a preset DAB radio station  
1 Press DAB/FMrepeatedly to select DAB radio.  
2 Press numeric keypads to select a preset number.  
Use DAB menu  
1 In DAB mode, press MENU/SCAN to enter the DAB menu.  
2 Press TUNING +/- to scroll the menu options:  
#ꢀ [Station list]  
#ꢀ [Main menu]  
#ꢀ [Station order]  
#ꢀ [DRC] (dynamic range control)  
#ꢀ [Manual tune]  
#ꢀ [Full scan]  
#ꢀ [Local scan]  
3 To select an option, press SELECT.  
4 Repeat step 2-3 if sub-option is available under one option.  
[Main menu]  
#ꢀ [Info] (Software version of the radio player is shown.)  
#ꢀ [Factory reset] (Resets all the settings of this radio player to factory  
default.)  
#ꢀ ꢘꢄꢇꢑꢑRXZ[Z+5Qꢀꢃꢂꢀꢋꢂꢏ\ꢄꢁꢀꢄꢇꢑꢃꢕ  
[Station order]  
5ꢊꢅꢑꢀꢗꢙꢏꢋꢃꢅꢂꢏꢀꢇꢏꢓꢔꢌꢇꢑꢀꢎꢂꢙꢀꢃꢂꢀꢈꢇ\ꢏꢇꢀꢊꢂ"ꢀꢃꢊꢇꢀꢑꢃꢓꢃꢅꢂꢏꢑꢀꢓꢄꢇꢀꢓꢄꢄꢓꢏꢐꢇꢈꢀ"ꢊꢇꢏꢀ  
scrolling the stations list.  
#ꢀ [Alphanumeric]This is the default setting.The stations are arranged  
 
in alphabetical order.  
#ꢀ [Valid]5ꢊꢅꢑꢀꢂ!ꢃꢅꢂꢏꢀꢌꢅꢑꢃꢑꢀꢉꢓꢌꢅꢈꢀꢑꢃꢓꢃꢅꢂꢏꢑꢀ\ꢄꢑꢃꢍꢀꢓꢌ!ꢊꢓꢏꢙꢁꢇꢄꢅꢋꢓꢌꢌꢎꢍꢀꢃꢊꢇꢏꢀ  
off-air station.  
#ꢀ [Ensemble]This option lists groups of stations that are broadcast  
together on the same ensemble (i.e.: BBC or South Wales local).  
[Manual tune]  
]ꢃꢀꢅꢑꢀ!ꢂꢑꢑꢅꢔꢌꢇꢀꢃꢂꢀꢁꢓꢏꢙꢓꢌꢌꢎꢀꢃꢙꢏꢇꢀꢃꢂꢀꢓꢀꢑ!ꢇꢋꢅ\ꢋꢀꢋꢊꢓꢏꢏꢇꢌ^ꢗꢄꢇ#ꢙꢇꢏꢋꢎꢀꢓꢏꢈꢀꢓꢈꢈꢀ  
this to the station list.  
This function can be used to obtain the optimum reception for a  
ꢑ!ꢇꢋꢅ\ꢋꢀꢋꢊꢓꢏꢏꢇꢌ^ꢗꢄꢇ#ꢙꢇꢏꢋꢎꢍꢀꢃꢓꢒꢅꢏꢐꢀꢅꢏꢃꢂꢀꢓꢋꢋꢂꢙꢏꢃꢀꢃꢊꢇꢀ!ꢂꢑꢅꢃꢅꢂꢏꢀꢂꢗꢀꢃꢊꢇꢀꢓꢇꢄꢅꢓꢌꢕ  
» &ꢀꢄꢇꢋꢃꢓꢏꢐꢌꢇꢀ"ꢅꢌꢌꢀꢔꢇꢀꢈꢅꢑ!ꢌꢓꢎꢇꢈꢀꢂꢏꢀ\ꢄꢑꢃꢀꢌꢅꢏꢇꢀꢂꢗꢀꢃꢊꢇꢀꢈꢅꢑ!ꢌꢓꢎꢕ5ꢊꢇꢀ!ꢂꢑꢅꢃꢅꢂꢏꢀ  
of this rectangle indicates the signal strength (the further towards the  
right, the greater the signal strength).  
» The second line of the display shows the selected channel and its  
ꢗꢄꢇ#ꢙꢇꢏꢋꢎꢕ5ꢊꢇꢀ\ꢄꢑꢃꢀꢌꢅꢏꢇꢀꢂꢗꢀꢃꢊꢇꢀꢈꢅꢑ!ꢌꢓꢎꢀꢑꢊꢂ"ꢑꢀꢓꢀꢄꢇꢋꢃꢓꢏꢐꢌꢇꢕ  
Tip  
# Adjust the position of the antenna to obtain the optimum signal strength.  
[DRC]  
Dynamic range control (DRC) adds or removes a degree of compensation  
for the differences in the dynamic range between radio stations.  
#ꢀ [DRC high] (DRC is switched on; the default setting recommended  
for noisy environment.)  
#ꢀ [DRC low] (DRC is set to half normal level.)  
#ꢀ [DRC off] (DRC is switched off.)  
[Full scan] and [Local scan]  
Local scan is used to perform a small range of DAB radio search (in  
UK). Full scan is used to perform a wide range of DAB radio search  
(outside UK).  
 
Note  
# If no button is pressed within seven seconds, the menu exits.  
6
Product information  
Note  
# Product information is subject to change without prior notice.  
Tuner (FM)  
Tuning Range  
Tuning grid  
87.5 - 108MHz  
50KHz  
Tuner (DAB)  
Tuning Range  
174.928MHz - 239.200MHz (Band III)  
 
General information  
AC/DC adaptor  
- Brand name  
- Model  
PHILIPS  
OH-1048A0750500U2-UK  
100-240V~, 50/60 Hz, 250 mA  
- Input  
- Output  
7.5V  
500mA  
Operation Power Consumption  
Standby Power Consumption  
Power output  
5 W  
<1 W  
0.3W (10%THD)  
1,5V x 6  
Battery power input  
Headphone output power  
12 mW x 2 (32 Ohm)  
Dimensions  
- Main Unit (W x H x D)  
317 x 133 x 90 mm  
Weight  
- Main Unit  
0,884 kg  
7
Troubleshooting  
Warning  
# Never remove the casing of this apparatus.  
To keep the warranty valid, never try to repair the system yourself.  
If you encounter problems when using this apparatus, check the  
following points before requesting service. If the problem remains  
you contact Philips, ensure that the apparatus is nearby and the model  
number and serial number are available.  
 
No power  
# Ensure that the AC power plug of the unit is connected properly.  
# Ensure that there is power at the AC outlet.  
# Insert the batteries with their polarities (+/– signs) aligned as indicated.  
# Replace the battery.  
No sound  
# Adjust the volume.  
Poor radio reception  
# Increase the distance between the unit and yourTV orVCR.  
# Fully extend the antenna.  
8
About DAB  
About Digital Audio Broadcasting (DAB)  
DAB digital radio is a new way of broadcasting radio via a network  
of terrestrial transmitters. It provides listeners with more choice and  
information delivered in crystal clear, crackle-free sound quality.  
The technology allows the receiver to lock on to the strongest signal  
ꢅꢃꢀꢋꢓꢏꢀ\ꢏꢈꢕ  
– With DAB digital stations there are no frequencies to remember, and  
sets are tuned by station name, so there’s no returning on the move.  
What is a multiplex?  
Digital radio operation is made up of a single block of frequencies called  
a multiplex. Each multiplex works within a frequency spectrum, such as  
Band III for DAB broadcasts.  
DAB BROADCASTERS AND DLS  
Each DAB broadcaster (or multiplex operator) also provides text and  
audio data services. Some programmes are supported by Dynamic Label  
Segments (DLS).This is data which you can read as scrolling text on your  
DAB radio display. Some stations transmit the latest news, travel, and  
weather, what’s on now and next, website addresses and phone numbers.  
For more information on digital radio coverage and services, please visit:  
 
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
AE2012_05_UM_V1.0  
 

Pentax Digital Camera 160 User Manual
Philips CD Player AZ1 133 User Manual
Philips Clock Radio AJ3540D User Manual
Philips Computer Monitor LF3 User Manual
Philips Projection Television 60PP9753 17 User Manual
Philips TV VCR Combo CCA194AT User Manual
Pioneer DJ Equipment Pioneer DJ Stand User Manual
Planet Technology Network Card WNL U554 User Manual
Plantronics Headphones CS545 XD User Manual
Polk Audio Speaker 7 User Manual