Quick Start Guide
Model name: SPF3010C/G7
Four easy steps to
immediately start using your
new Philips Digital PhotoFrame
Please refer to your User Manual for more detailed instructions.
free 1-877-784-0999
Connecting to power
1. Place your PhotoFrame on a flat surface.
2. Connect the power adapter as below (1) and slide the power
switch to the “ON” position (2).
• Power systems and plug types may vary depending on your
country/region. Before use, make sure if the power adapter
supports your local voltage.
• To turn off the PhotoFrame, slide the power switch to the “OFF”
position.
English
Inserting a memory card
Your Philips Digital PhotoFrame comes with a preloaded Video
Library that has 3 video clips, Monterey Bay Aquarium Jellies,
Warm Hearth and Forest Waterfall. Upon turning on the
PhotoFrame, playback of the preloaded videos starts with no
memory card inserted.
To play back your own picture or music files, insert a picture/
music loaded memory card or USB flash drive into the
corresponding slot on the PhotoFrame as illustrated below.
SD / SDHC
MultiMediaCard
Memory Stick
Memory Stick
PRO
xD-Picture
Card
Memory Stick
Duo
Memory Stick
PRO Duo
CompactFlash
Card
The PhotoFrame accepts the following memory card formats: SD™
/
SDHC™, MultiMediaCard™ (MMC), Memory Stick™ (MS), Memory Stick
PRO™ (MS PRO), xD-Picture Card™ (xD) and CompactFlash® Card
(CF). For details, refer to the User Manual.
English
Using the control buttons
After turning on the PhotoFrame, you can use the control buttons
on the back to operate the PhotoFrame.
1. Press any control button to bring up the On-Screen Display
(OSD) toolbar.
2. Press the control button corresponding to the icon shown on
the screen as by its function or in its order.
Mapping On-Screen Display toolbar
Control buttons on the back
of the PhotoFrame
• You can also use the supplied remote control to operate the
PhotoFrame. For details, refer to the User Manual.
• To toggle among Photo, Music, Video Library, Collage, Calendar,
File, Source and Setup modes, press
/
in the main menu.
• Available functions vary depending on the currently selected mode
and/or screen.
• The OSD toolbar hides automatically when the PhotoFrame is idle.
You can press any button to bring up the toolbar.
• To erase the videos from the PhotoFrame will permanently remove
the videos as well as the Video Library mode from the main menu.
Please consider carefully before doing so because once deleted
there is no way to retrieve the video. This PhotoFrame only
supports the preloaded videos and does not support any other
video.
English
©2009 Koninklijke Philips N.V.
All rights reserved.
P/N: 4J.0SW17.001
English
|