Philips Clock Radio MCR600 User Manual

1
Return yourWarranty Registration card today to  
User guide  
2
1
ensure you receive all the benefits youre entitled to  
.
• Once your Magnavox purchase is  
• So complete and return theWarranty  
registered, you’re eligible to receive all the Registration Card enclosed with your  
privileges of owning a Magnavox product. purchase at once, and take advantage  
of these important benefits.  
MCR-600  
CD CLOCK RADIO  
Warranty  
Owner  
Model  
Verification  
Confirmation Registration  
R
Registering your product  
within 10 days confirms  
your right to maximum  
protection under the  
Your completed Warranty Returning your Warranty  
Registration Card serves Registration Card right  
as verification of owner- away guarantees you’ll  
ship in the event of prod- receive all the information  
3
4
5
Need help? Call us!  
Return  
Magnavox representatives are ready to help you with  
any questions about your new product. We can guide  
you through Connections, First-time Setup, or any of  
the Features.We want you to start enjoying your  
new product right away!  
your Warranty  
Registration Card  
within 10 days  
terms and conditions of  
your Magnavox warranty.  
uct theft or loss.  
and special offers which  
you qualify for as the  
owner of your model.  
Y
0
CALL US BEFORE YOU CONSIDER  
RETURNING THE PRODUCT!  
9
Know these  
1-800-705-2000  
For Customer Use  
8
or  
Enter below the Serial No. which is locat-  
ed on the bottom of the cabinet. Retain  
this information for future reference.  
7
6
safetysymbols  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Model No. ______________________  
Serial No. _______________________  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This “bolt of lightning” indi-  
cates uninsulated material  
within your unit which may  
WARNING: TO REDUCETHE  
RISK OF FIRE OR ELECTRIC SHOCK,  
THIS SHOULD NOT EXPOSEDTO RAIN  
OR MOISTURE, AND OBJECTS FILLED  
WITH LIQUIDS, SUCH ASVASES, SHOULD  
NOT BE PLACED ONTHIS APPARATUS.  
#
cause an electrical shock. For the  
safety of everyone in your household,  
please do not remove product covering.  
The “exclamation point”  
calls attention to features for  
which you should read the  
CAUTION: To prevent electric  
shock, match wide blade of plug to  
wide slot, and fully insert.  
@
!
enclosed literature closely to prevent  
operating and maintenance problems.  
MAC5097  
LIMITED WARRANTY  
IMPORTANT SAFETY INSTRUCTIONS  
PORTABLE AUDIO  
90 Days Free Exchange  
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA  
This product must be carried in for an exchange.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
12.  
Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer or sold with  
the apparatus.When a cart is  
used, use caution when moving  
the cart/apparatus combination  
to avoid injury from tip-over.  
Knoxville, Tennessee 37914-1810, U.S.A.  
WHO IS COVERED?  
BEFORE REQUESTING EXCHANGE  
You must have proof of purchase to exchange the product.A Please check your owner's manual for assistance. If you  
sales receipt or other document showing that you purchased have additional questions, call us at 1-800-705-2000.  
the product is considered proof of purchase.Attach it to this  
4. Follow all instructions.  
owners manual and keep both nearby.  
EXCHANGING A PRODUCT IN U.S.A.,  
PUERTO RICO, OR U.S.VIRGIN ISLANDS…  
Contact 1-800-705-2000 to arrange an exchange. Or, ship  
5. Do not use this apparatus near  
water.  
WHAT IS COVERED?  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
Warranty coverage begins the day you buy your product. For the product, insured and freight prepaid, and with proof of  
Meet Magnavox at the Internet  
90 days thereafter, a defective or inoperative product will be  
replaced with a new, renewed or comparable product at no  
charge to you.A replacement product is covered only for  
the original warranty period.When the warranty on the  
original product expires, the warranty on the replacement  
product also expires.  
purchase enclosed, to the address listed below.  
6. Clean only with dry cloth.  
Magnavox Exchange Program  
Suite A  
406 North Irish Street  
Greeneville TN 37745  
7. Do not block any ventilation  
openings. Install in accordance with  
the manufacturer´s instructions.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied  
warranties, including implied warranties of merchantability  
and fitness for a particular purpose, are limited in duration  
to the duration of this express warranty. But, because some  
states do not allow limitations on how long an implied  
warranty may last, this limitation may not apply to you.)  
8. Do not install near any heat sources  
such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
labor charges for installation or setup of the product,  
adjustment of customer controls on the product, and  
installation or repair of antenna systems outside of the  
product.  
product repair and/or part replacement because of  
misuse, accident, unauthorized repair or other cause  
not within the control of Magnavox.  
9. Do not defeat the  
safety purpose of the  
polarized or  
grounding-type plug.  
A polarized plug has two blades with one  
wider than the other.A grounding type plug  
has two blades and a third grounding prong.  
The wide blade or the third prong are  
provided for your safety. If the provided plug  
does not fit into your outlet, consult an  
electrician for replacement of the obsolete  
outlet.  
EXCHANGING A PRODUCT IN CANADA…  
Please contact Magnavox at:  
15.Battery usage CAUTION To  
prevent battery leakage which may result in  
bodily injury, property damage, or damage  
to the unit:  
AC Polarized  
Plug  
1-800-661-6162 (French Speaking)  
1-800-705-2000 (English or Spanish Speaking)  
reception problems caused by signal conditions or  
cable or antenna systems outside the unit.  
W
CLASS 1  
(In Canada, this warranty is given in lieu of all other  
warranties. No other warranties are expressed or implied,  
including any implied warranties of merchantability or fitness  
for a particular purpose. Magnavox is not liable under any  
circumstances for any direct, indirect, special, incidental or  
consequential damages, howsoever incurred, even if notified  
of the possibility of such damages.)  
a product that requires modification or adaptation to  
enable it to operate in any country other than the  
country for which it was designed, manufactured,  
approved and/or authorized, or repair of products  
damaged by these modifications.  
MCR600  
G
G
G
Install all batteries correctly, + and - as  
marked on the unit.  
incidental or consequential damages resulting from the  
product. (Some states do not allow the exclusion of  
incidental or consequential damages, so the above  
exclusion may not apply to you.This includes, but is not  
limited to, prerecorded material, whether copyrighted  
or not copyrighted.)  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
REMEMBER…  
Remove batteries when the unit is not used  
for a long time.  
Please record below the model and serial numbers found  
on the product.Also, please fill out and mail your warranty  
registration card promptly. It will be easier for us to notify  
you if necessary.  
10. Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
a product used for commercial or institutional purposes.  
LASER PRODUCT  
16.Apparatus shall not be exposed to  
dripping or splashing.  
WHERE IS EXCHANGE AVAILABLE?  
You may exchange the product in all countries where the  
product is officially distributed by Magnavox. In countries  
where Magnavox does not distribute the product, the local  
Magnavox service organization will attempt to provide a  
replacement product (although there may be a delay if the  
appropriate product is not readily available).  
MODEL # __________________________________  
17.Do not place any sources of danger  
on the apparatus (e.g. liquid filled  
objects, lighted candles).  
11.Only use attachments/accessories  
specified by the manufacturer.  
SERIAL #  
__________________________________  
18.This product may contain lead and mercury.  
Disposal of these materials may be regulated  
due to environmental considerations.  
For disposal or recycling information,  
please contact your local authorities  
or the Electronic Industries Alliance :  
EL 6475-E005: 04/01  
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.  
Class II equipment symbol  
(402) 536-4171  
LC/bk WK410 Issue 1  
Printed in China  
Magnavox, P.O. Box 520890, Miami, FL 33152, USA,  
This symbol indicates that the unit has a double insulation system.  
EL6516T002 / 8-02  
 
English  
CONTROLS  
POWER SUPPLY  
BASIC FUNCTIONS  
This set runs on AC power.  
0 POWER  
! Power cord  
@ battery compartment  
battery (for memory backup power supply only).  
Power cord posts for wrapping the power cord  
so that excess cord does not hang down  
switches the CD/ tuner function on/off.  
CONTROLS (see Fig. 1)  
Switching CD/ Tuner on/off  
We recommend you also insert a 9V battery for  
memory back-up power supply. In the event of a  
power interruption, this will help safeguard the clock,  
timer settings and preset radio stations. To save ener-  
gy, the display switches off and you will not be able  
to operate the CD/ Tuner functions.  
connect to AC power supply.  
Open to insert 1 x 9V  
TIMER  
CH  
SLEEP  
REPEAT  
TRACK MEMORY  
TIME  
1 Source selectors – selects CD or TUNER function.  
REMAIN  
STEREO  
CD  
FM AM  
PM  
2 BAND – selects FM/AM wavebands;  
TUNER  
2;  
starts or pauses CD playback;  
BAND  
SEARCH/TUNING  
#
SEARCH/TUNING , §  
CD : skips or searches a CD track/passage backward  
or forward;  
TUNER : tunes to radio stations;  
CLOCK : adjusts the hours/minutes for clock time;  
:
TIMER  
REPEAT/PRESET  
POWER  
10  
3
1
AC power  
1. To switch on, press POWER.  
1. Check if the AC power supply, as shown on the  
type plate located on the  
bottom of the set, corre-  
sponds to your local  
power supply. If it does  
not, consult your dealer or  
service center.  
The set automatically powers on the last sound  
9
stops CD playback  
– erases a CD program.  
PROG/CLOCK  
source played.  
Supplied Accessories  
Mounting kit:  
– 4 x spacers  
– 4 x “Phillips” head screws  
– 1 x mounting template  
2. Press CD or TUNER to select your desired  
function.  
:
CD : programs tracks and review the program;  
TUNER : programs preset radio stations;  
CLOCK : sets the clock time.  
3. To switch off, press POWER.  
The set returns to clock standby mode.  
2. Connect the power cord to the wall outlet. The set  
is now ready for use.  
Adjusting volume  
3 Display – shows the status of the set.  
For mounting instructions, please refer to 'How  
to Mount MCR600'  
.
4 OPEN•CLOSE – press to open/close the CD  
Adjust the CD/ Tuner volume with the VOLUME  
control.  
Helpful Hints:  
– To disconnect the power supply, unplug the set from  
the wall outlet.  
compartment.  
5 VOLUME – adjusts volume level.  
EP  
TIME  
MAIN  
STEREO  
MHz  
KHz  
6 SLEEP – activates/ deactivates sleep timer  
function to automatically switch off tuner/ CD  
playback;  
– Disconnect the power supply to protect your set  
during heavy thunderstorms.  
CH/TUNING  
PROG/CLOCK  
VOLUME  
– adjusts sleep timer options.  
REPEAT/PRESET  
DISPLAY  
SLEEP  
CAUTION  
1
To reduce the risk of fire, do not place any  
heating or cooking apparatus beneath this  
unit.  
Backup battery (not included. See 1)  
7 DISPLAY – toggles to show clock time /elapsed  
CD play time or remaining CD playback time.  
Insert 1 x 9V battery (preferably alkaline) with the  
correct polarity.  
Setting the clock  
8 REPEAT/PRESET  
The clock is displayed using the 12-hour clock with  
PM and AM indicators.  
– repeats a CD track/program/the entire CD;  
Helpful Hints:  
To prevent obstruction or danger, use the  
power cord posts to wrap the power cord  
so that excess cord does not hang down.  
-- selects a preset radio station.  
– Change the battery twice a year or as often as  
required to ensure fresh battery supply and to  
prevent battery leakage. To safeguard the clock,  
timer and preset station settings, keep the set  
connected to AC power when replacing the battery.  
TIMER  
CH  
SLEEP  
REPEAT  
TIME  
TRACK MEMORY  
REMAIN  
STEREO  
9 TIMER – alarm timer with 3 setting options: 10, 3  
FM AM  
PM  
and 1 minute.  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
– Incorrect use of batteries can cause electrolyte  
leakage and will corrode the compartment or cause  
the batteries to burst.  
1. Check you have switched off the CD/Tuner.  
2. Press PROG/CLOCK to activate clock setting.  
The respective hour/ minute setting flashes.  
3. Use SEARCH/TUNING , § to adjust the  
hours/ minutes.  
Batteries contain chemical substances, so they  
should be disposed of properly.  
4 Press PROG/CLOCK to store the hour/ minute  
setting.  
CD PLAYER  
SLEEP  
Programming tracks  
Reviewing the program  
About SLEEP  
About TIMER  
Program in the stop position to select and store  
your CD tracks in the desired sequence. If you like,  
store any track more than once. Up to 20 tracks  
(P-01 - P-20) can be stored in the memory.  
In the stop position, press PROG/CLOCK once or  
repeatedly to display all the stored tracks in sequence.  
This set has a built-in "sleep" timer which enables  
the set to be automatically switched off during  
CD/ tuner playback after a selected period of time.  
You can choose from 9 sleep time options  
(90, 80, 70....10 minutes).  
The TIMER is an alarm beeper function.  
With the TIMER buttons 10, 3 or 1, you can set a  
time (minimum 1 minute, maximum 99 minutes) to  
activate a beeper during clock standby mode, or CD/  
tuner playback.  
TRACK  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
TRACK MEMORY  
SLEEP  
TIME  
TRACK  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
Erasing the program  
You can erase the contents of the memory by:  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
10  
3
1
opening the CD door;  
selecting TUNER;  
pressing 9 twice during playback or once in the  
10  
3
1
1. Press PROG/CLOCK to activate programming.  
Display: TRACK MEMORY flashes.  
you to select a track number.  
the start of the program.  
prompts  
indicates  
To set a TIMER period:  
Setting SLEEP  
To select the 90 minute SLEEP option:  
stop position.  
The TIMER period increases by steps of 10, 3 or 1, or  
their multiples. You can also press a combination of  
the TIMER digits to set the TIMER alarm.  
During CD/ tuner playback, briefly press SLEEP  
DISPLAY  
2. Press or § to select your desired track.  
once.  
Press 10, 3 or 1 once, or repeatedly to set/ adjust  
the time.  
,
3. Press PROG to confirm.  
Display shows SLEEP and  
.
TRACK  
REMAIN  
Display: TRACK MEMORY flashes.  
to select a track number.  
indicate the next program location available.  
prompts you  
appears to  
To select other SLEEP time options:  
1. During CD/ tuner playback, press and hold SLEEP.  
Display shows SLEEP and the options in  
Display: TIME appears.  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
E.g. to set TIMER for :  
1 minute, press 1.  
17 minutes, press 10, 3, 3, 1.  
4. Repeat 3-4 to select and store all desired tracks.  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
,
,
,
,
,
,
sequence:  
10  
3
1
,
,
,
Helpful Hints:  
Press DISPLAY once or more to toggle to check  
the clock time during CD/ Tuner playback.  
Helpful Hints:  
– The beeper is set at a fixed volume and cannot be  
adjusted.  
*
2. Release SLEEP when your desired option appears.  
– If you fail to execute any action within 7 seconds  
after pressing PROG/CLOCK, programming will  
stop and you will need to start again.  
To cancel the SLEEP timer, you can either:  
Helpful Hints:  
• Press SLEEP briefly once again.  
• Press POWER.  
Display: SLEEP disappears.  
To cancel TIMER  
For CDs, you can also select to view: elapsed CD  
play time or ‘REMAINremaining CD playback  
time.  
During the beeper alarm: press any of the TIMER  
buttons, 10, 3 or 1.  
Before the TIMER goes off: press 10 once or  
*
To start playback of your program  
Press 2;.  
– Viewing the remaining CD playback time is not  
repeatedly until  
appears and TIME disappears.  
available during CD playback in any REPEAT mode.  
 
TUNER  
CD PLAYER  
Playing a CD  
Selecting a different track, / §  
Tuning to stations  
PRESETS: programming tuner stations  
You can store up to 40 radio stations in the memory  
(20 FM and 20 AM).  
This CD player plays Audio Discs including CD-  
Recordables. Do not try to play MP3 CD-ROMs, CD-Is,  
CDV, VCDs, DVDs, computer CDs or CD-Rewritables.  
TIMER  
CH  
SLEEP  
REPEAT  
TRACK MEMORY  
TIME  
REMAIN  
STEREO  
CD  
FM AM  
PM  
MHz  
KHz  
TUNER  
TIMER  
CH  
SLEEP  
TIME  
BAND  
SEARCH/TUNING  
TRAC MEMORY  
REMAIN  
STEREO  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
FM  
PM  
MHz  
KHz  
TIMER  
REPEAT  
CH  
TRACK  
CD  
FM AM  
PM  
TIMER  
REPEAT/PR  
POWER  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
10  
3
1
During playback,  
Briefly press or § once or repeatedly until you  
find your desired track.  
TUNER  
BAND  
SEARCH/TUNING  
PROG/CL  
DISPLAY  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
10  
3
1
TIMER  
REPEAT/PRESET  
POWER  
1. Press POWER to on, then select TUNER.  
2. Press BAND once or more to select your desired  
waveband, FM or AM.  
10  
3
1
During stop or pause,  
Press 2; to start playback after your desired track is  
selected.  
1. Tune to your desired station (see Tuning to sta-  
tions).  
3. Tuning to stations:  
1. Press POWER to on, then select CD.  
2. Press OPEN CLOSE to open the CD compartment.  
3. Insert a CD with the printed side facing up and  
press OPEN CLOSE to close the CD compartment.  
Display shows: , and then the  
Press down on SEARCH/TUNING or § and  
release the button when the frequency in the dis-  
play starts running.  
The radio automatically tunes to a station of  
sufficient reception.  
To tune to a weak station, press or § briefly  
and repeatedly until you have found optimal  
reception.  
2. Press PROG/CLOCK to activate programming.  
Display: MEMORY flashes and CH XX appears,  
where XX denotes a preset location.  
3. Press REPEAT/PRESET once or more to select a  
preset number, 1-20.  
Finding a passage within a track  
1. During playback, press and hold or §  
The CD is played at high speed and low volume.  
.
2. When you recognize the passage you want, release  
total track number and total playing time.  
appears if no disc is inserted, or  
you have inserted a non-finalized CD-R(W).  
or §  
.
4. Press PROG/CLOCK to confirm.  
Display shows: the preset number, waveband  
and the frequency of the preset station.  
5. Repeat the above steps to store other stations.  
Selecting different playing modes: REPEAT  
01 and total playing time, if your CD contains  
non-audio/ MP3 files.  
4. Press 2; to start playback.  
Display shows: the current track number,  
elapsed playing time and 2.  
5. To pause playback press 2;. Press 2; again to  
resume play.  
4. Repeat step 3 if necessary until you find the  
Before or during CD playback, you can select a  
REPEAT mode.  
desired station.  
Helpful Hints:  
– If you fail to execute any action within 7 seconds  
after pressing PROG/CLOCK, programming will  
stop and you will need to start again.  
REPEAT  
TRACK  
To improve radio reception  
For FM, extend and adjust the AC power cord.  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
– You can erase a preset station by storing another  
frequency in its place.  
Time digits flash during pause.  
6. To stop CD playback, press 9.  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
10  
3
1
Helpful Hints:  
To listen to a preset station  
To repeat the entire CD or a program, press  
REPEAT/PRESET once.  
Display: REPEAT appears.  
To repeat a current track, press REPEAT/PRESET  
twice.  
The CD playback will also stop when:  
– the CD compartment is opened.  
– the CD has reached the end  
– you select another sound source.  
Press REPEAT/PRESET once or more until the  
desired preset station is displayed.  
CH  
STEREO  
FM AM  
MHz  
KHz  
Display: REPEAT flashes.  
• Press 2; to start playback if you have selected  
REPEAT in the stop or pause position.  
BAND  
SEARCH/TUNING  
PROG/CLOCK  
TIMER  
REPEAT/PRESET  
DISPLAY  
SLEEP  
POWER  
To resume normal playback  
10  
3
1
Press REPEAT/PRESET once or more until REPEAT  
disappears from the display.  
TROUBLESHOOTING  
MAINTENANCE AND SAFETY  
CD player and disc handling (see 2)  
Safety Information (see 2)  
If a fault occurs, first check the points listed below before taking the set to repair. If you are unable to rem-  
edy a problem by following these hints, consult your dealer or service center.  
WARNING: Do not open the set as there is a risk of electric shock! Under no  
circumstances should you try to repair the set yourself, as this will invali-  
date the warranty.  
If the CD player cannot read CDs correctly, use a  
cleaning CD to clean the lens before taking the  
set to repair.  
Don't expose the set, batteries, CDs or cassettes  
to humidity, rain, sand or excessive heat.  
Clean the set with a dry cloth. Don't use any  
cleaning agents containing alcohol, ammonia,  
benzene or abrasives as these may harm the set.  
The lens of the CD player should never be  
touched!  
No sound/power  
indication  
Sudden changes in the surrounding temperature  
can cause condensation on the lens of your CD  
player. Playing a CD is then not possible. Do not  
attempt to clean the lens, but leave the set in a  
warm environment until the moisture evaporates.  
Place the set on hard and flat surface so that the  
system does not tilt. Make sure there is good  
ventilation to prevent the set overheating.  
Volume not adjusted.  
No CD inserted.  
• Adjust the VOLUME.  
• Insert a suitable disc.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
Power cord not securely connected.  
• Connect the AC power cord properly.  
CD badly scratched or dirty.  
• Replace/clean CD (See Maintenance).  
Laser lens steam up.  
Always close the CD door to avoid dust on the  
lens.  
Electrostatic discharge/interference.  
• Unplug the set and remove battery from the battery  
compartment. Then, replug /replace battery. Try acti-  
vating the set again.  
Apparatus shall not be exposed to dripping or  
splashing.  
• Wait until lens has cleared.  
To clean the CD, wipe in a straight line from the  
centre towards the edge using a soft, lint-free  
cloth. Do not use cleaning agents as they may  
damage the disc.  
and total playing time indication  
Do not place any sources of danger on the appa-  
ratus (e.g. liquid filled objects, lighted candles).  
CD-ROM disc inserted/CD contains non-audio files.  
• Use CD Audio discs only, or press SEARCH , §  
once or more skip the data file to a suitable audio  
track.  
CD contains non-audio files.  
Never write on a CD or attach any stickers to it.  
Press SEARCH or § once or more skip the data  
file to a suitable audio track.  
Severe radio hum or noise  
The CD skips tracks  
Electrical interference: set too close to TV, VCR or  
CD damaged or dirty.  
computer.  
• Replace or clean CD.  
Canada  
• Move the set/ TV, VCR or computer to increase the  
distance.  
Program is active  
• Switch off program.  
English:This digital apparatus does not exceed the Class B limits for radio noise emis-  
sions from digital apparatus as set out in the Radio Interference Regulations of the Cana-  
dian Department of Communications.  
Poor radio reception  
Weak radio signal.  
• FM: Extend and adjust AC power cord.  
Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les  
limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur  
le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.  
Environmental information  
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.  
Operation is subject to the following two conditions:  
1.This device may not cause harmful interference, and  
2.This device must accept any interference received, including interference that  
may cause undesired operation.  
We have done our best to reduce the packaging and make it easy to separate into 3 materials:  
cardboard, expandable polystyrene, polyethylene.  
Your set consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the  
disposal of packaging, dead batteries and old equipment.  
 

Philips Car Video System 170S5 User Manual
Philips Electric Shaver T186 User Manual
Philips Headphones SHL8500 User Manual
Philips Work Light PL L User Manual
Pioneer Car Stereo System DEH P4100UB User Manual
Pioneer CD Player PD M407 User Manual
Pioneer DVD Player DV 47Ai User Manual
PNY Computer Hardware VCGGTX7702XPB User Manual
Power Acoustik Cell Phone PBLUE 2 User Manual
ProForm Home Gym PFCCEL45011 User Manual