Philips Car Stereo System MCM2150 User Manual

Always there to help you  
Register your product and get support at  
MCM2150  
Question?  
Contact  
Philips  
User manual  
 
Contents  
1 Important  
2
2
8 Troubleshooting  
9 Notice  
14  
15  
Safety  
2 Your micro system  
Introduction  
4
4
4
5
6
What's in the box  
Overview of the main unit  
Overview of the remote control  
3 Get started  
Connect speakers  
Connect power  
Demonstrate the features  
Prepare the remote control  
Set clock  
7
7
7
7
8
8
8
Turn on  
4 Play  
9
9
9
9
9
9
Play from disc  
Play from USB  
Control play  
Skip to a track  
Program tracks  
5 Listen to the radio  
10  
10  
10  
10  
10  
Tune to a radio station  
Program radio stations automatically  
Program radio stations manually  
Select a preset radio station  
6 Other features  
Set the alarm timer  
11  
11  
11  
11  
Set the sleep timer  
Listen to an external device  
7 Product information  
Specifications  
12  
12  
13  
13  
USB playability information  
Supported MP3 disc formats  
EN  
1
 
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the device.  
Only use attachments/accessories specified  
by the manufacturer.  
Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer or sold with the device.  
When a cart is used, use caution when  
moving the cart/device combination to  
avoid injury from tip-over.  
1 Important  
Safety  
This 'bolt of lightning' indicates uninsulated  
material within the device may cause an  
electrical shock. For the safety of everyone in  
your household, please do not remove the  
covering.  
The 'exclamation mark' calls attention to  
features for which you should read the enclosed  
literature closely to prevent operating and  
maintenance problems.  
WARNING:To reduce the risk of fire or electric  
shock, the device should not be exposed to rain  
or moisture and objects filled with liquids, such  
as vases, should not be placed on the device.  
CAUTION:To prevent electric shock, fully  
insert the plug. (For regions with polarized  
plugs:To prevent electric shock, match wide  
blade to wide slot.)  
Unplug this device during lightning storms  
or when unused for long periods of time.  
Refer all servicing to qualified service  
personnel. Servicing is required when the  
device has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have  
fallen into the device, the device has been  
exposed to rain or moisture, does not  
operate normally, or has been dropped.  
Battery usage CAUTION To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to the  
unit:  
Important Safety Instructions  
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Batteries (packed or installed) shall not  
be exposed to excessive heat such as  
sunshine, fire or the like.  
Remove batteries when the unit is not  
used for a long time.  
Follow all instructions.  
Heed all warnings.  
Do not use this device near water.  
Clean only with dry cloth.  
Do not block any ventilation openings.  
Install in accordance with the  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce  
heat.  
The device shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on  
the device (e.g. liquid filled objects, lighted  
candles).  
2
EN  
 
Where the MAINS plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Warning  
Never remove the casing of this device.  
Never lubricate any part of this device.  
Never place this device on other electrical equipment.  
Keep this device away from direct sunlight, naked  
flames or heat.  
Never look into the laser beam inside this device.  
Ensure that you always have easy access to the power  
cord, plug, or adaptor to disconnect this device from  
the power.  
EN  
3
 
2 Your micro  
system  
What's in the box  
Check and identify the contents of your  
package:  
Main unit  
2 x speakers  
Remote control (with one AAA battery)  
User manual  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
SOURCE  
VOLUME  
Introduction  
CD  
AUDIO IN  
PRESET/ALBUM  
FM  
REPEAT  
AUDIO IN  
VOL  
SHUFFLE  
MUTE  
DISPLAY  
PROG  
TIMER  
SLEEP  
SOUND  
CLOCK  
With this unit, you can:  
enjoy audio from discs, USB storage  
devices, and other external devices;  
listen to radio stations.  
SOURCE  
VO  
L
U
M
E
A
U
D
I
O
I
N
You can enrich sound output with below  
sound effect:  
Digital Sound Control (DSC)  
DSC 1: Balanced  
DSC 2: Clear  
DSC 3: Powerful  
DSC 4:Warm  
DSC 5: Bright  
The unit supports these media formats:  
4
EN  
 
Overview of the main unit  
k
j
i
a
SOURCE  
VOLUME  
b
c
d
h
g
e
AUDIO IN  
f
a
j VOLUME +/-  
Turn the unit on or off.  
Switch to standby mode or Eco  
standby mode.  
Adjust volume.  
k
Start, pause, or resume play.  
b SOURCE  
Select a source: CD, USB, FM,AUDIO  
IN.  
c Display panel  
Show current status.  
d
Jack for a USB device.  
e AUDIO IN  
Audio input jack (3.5mm) for an  
external audio device.  
f Disc compartment  
g
Open/close the disc compartment.  
Stop play or erase a program.  
h
i
/
Skip to the previous/next track.  
Search within a track/disc/USB.  
Tune to a radio station.  
Adjust time.  
EN  
5
 
f VOL +/-  
Overview of the remote  
control  
Adjust volume.  
g MUTE  
Mute or restore volume.  
a
b
h SOUND  
Enrich sound effect with Digital Sound  
r
Control (DSC).  
CD  
i CLOCK  
AUDIO IN  
c
PRESET/ALBUM  
FM  
Set the clock.  
q
p
View clock information.  
d
j SLEEP/TIMER  
e
Set sleep timer.  
Set alarm timer.  
REPEAT  
o
n
m
l
k
k PROG  
VOL  
f
Program tracks.  
Program radio stations.  
Auto store FM radio stations.  
SHUFFLE  
PROG  
MUTE  
DISPLAY  
CLOCK  
g
h
i
TIMER  
SLEEP  
l DISPLAY  
SOUND  
Adjust display brightness.  
j
m SHUFFLE  
Play tracks randomly.  
n
Stop play or erase a program.  
a
o REPEAT  
Turn the unit on or off.  
switch to standby mode or Eco power  
standby mode.  
Play a track or all tracks repeatedly.  
p
Start, pause, or resume play.  
b CD  
Select CD source.  
Select FM source.  
q USB/AUDIO IN  
Select USB or AUDIO IN source.  
c FM  
r
Press to open or close the disc  
compartment.  
/
Skip to previous/next album.  
e
/
Skip to the previous/next track.  
Search within a track/disc/USB.  
Tune to a radio station.  
Adjust time.  
6
EN  
 
3 Get started  
Connect power  
Caution  
Caution  
Risk of product damage! Ensure that the power supply  
voltage corresponds to the voltage printed on the back  
or the underside of the unit.  
Risk of electric shock! When you unplug the AC power  
cord, always pull the plug from the socket. Never pull  
the cord.  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Before you connect the AC power cord, ensure that  
you have completed all other connections.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
back of the apparatus.Write the numbers here:  
Model No. __________________________  
Serial No. ___________________________  
FM  
ANTENNA  
SPEAKER OUT (8Ω)  
100-240V~50/60 Hz  
AC MAINS~  
Connect speakers  
Note  
For optimal sound, use the supplied speakers only.  
Connect only speakers with impedance that is the  
same or higher than the supplied speakers. Refer to the  
Specifications section of this manual.  
Demonstrate the features  
In the standby mode, you can demonstrate  
features by pressing  
.
» The features are displayed one by one  
SPEAKER OUT (8Ω)  
FM  
across the display panel.  
SPEAKER OUT (8Ω)  
ANTENNA  
To turn off the demonstration, press  
again.  
100-240V~50/60 Hz  
AC MAINS~  
EN  
7
 
Tip  
Prepare the remote control  
You can view clock information in power-on mode by  
pressing CLOCK.  
Caution  
Risk of explosion! Keep batteries away from heat,  
sunshine or fire. Never discard batteries in fire.  
Risk of decreased battery life! Never mix different  
brands or types of batteries.  
Risk of product damage! When the remote control is  
not used for long periods, remove the batteries.  
Turn on  
Press  
.
» The unit switches to the last selected  
To insert the remote control battery:  
source.  
1 Open the battery compartment.  
2 Insert the supplied AAA battery with  
Switch to standby mode  
correct polarity (+/-) as indicated.  
3 Close the battery compartment.  
Press again to switch the unit to standby  
mode.  
» The clock (if set) is displayed on the panel.  
Switch to ECO standby mode:  
Press and hold for more than two seconds.  
» The display panel is dimmed.  
Note  
Set clock  
The unit switches to Eco Power Standby mode after 15  
minutes in standby mode.  
1 In standby mode, press and hold CLOCK  
on the remote control for more than two  
seconds.  
Switch between standby mode and ECO  
standby mode:  
Press and hold for more than two seconds.  
» [24H] or [12H] hour format is  
displayed.  
2 Press  
/
to select [24H] or [12H]  
hour format, and then press CLOCK.  
» The hour digits are displayed and begin  
to blink.  
3 Press  
CLOCK.  
/
to set hour, and then press  
» The minute digits are displayed and  
begin to blink.  
4 Repeat step 3 to set minute.  
Note  
If no button is pressed in 90 seconds, the system exits  
clock setting mode automatically.  
8
EN  
 
4 Play  
Skip to a track  
For CD:  
Press  
/
to select another track.  
Play from disc  
For MP3 disc and USB:  
1 Press CD repeatedly to select CD source.  
1 Press  
2 Press  
/
to select an album or a folder.  
2 Press to open the disc compartment.  
/
to select a track or a file.  
3 Insert a disc with the printed side facing  
upward.  
4 Press to close the disc compartment.  
Program tracks  
» Play starts automatically. If not, press  
.
You can program a maximum of 20 tracks.  
1 Press PROG to activate the program  
mode.  
Play from USB  
2 For MP3 tracks, press  
/
to select an  
album.  
Note  
3 Press  
/
to select a track, and then  
press PROG to confirm.  
Make sure that the USB device contains playable audio  
content.  
4 Repeat steps 2 to 3 to program more  
tracks.  
5 Press  
to play the programmed tracks.  
» During play, [PROG] (program) is  
1 Press USB repeatedly to select the USB  
source.  
displayed.  
2 Insert a USB device into the  
socket.  
To erase the program, in the stop  
position, press  
» Play starts automatically. If not, press  
.
.
Control play  
/
Select a folder.  
/
Select an audio file.  
Pause or resume play.  
Stop play.  
REPEAT  
Play a track or all tracks repeatedly.  
SHUFFLE Play tracks randomly.  
VOL +/-  
MUTE  
SOUND  
Increase or decrease the volume.  
Mute or restore sound.  
Enrich sound effect with DSC:  
balanced, clear, powerful, warm,  
and bright.  
DISPLAY  
Adjust display brightness.  
EN  
9
 
5 Listen to the  
Program radio stations  
manually  
radio  
Tune to a radio station  
1 Tune to a radio station.  
2 Press PROG, and then press  
/
to  
Tip  
select a number from 1–20.  
Position the antenna as far as possible fromTV,VCR, or  
other radiation source.  
For optimal reception, fully extend and adjust the  
position of the antenna.  
3 Press PROG to confirm.  
» The preset number and the frequency  
of the preset station are displayed.  
4 Repeat steps 2-3 to program more  
1 Press FM repeatedly to select FM source.  
stations.  
2 Press and hold  
/
for more than two  
seconds.  
Note  
» The radio tunes to a station with  
To overwrite a programmed station, store another  
station in its place.  
strong reception automatically.  
3 Repeat step 2 to tune to more stations.  
To tune to a weak station:  
Press  
/
repeatedly until you find optimal  
reception.  
Select a preset radio station  
In tuner mode, press  
number.  
/
to select a preset  
Program radio stations  
automatically  
Note  
You can program a maximum of 20 preset radio  
stations (FM).  
In tuner mode, press and hold PROG for  
more than two seconds to activate automatic  
programming.  
» All available stations are programmed in the  
order of waveband reception strength.  
» The first programmed radio station is  
broadcast automatically.  
10 EN  
 
6 Other features  
Set the sleep timer  
To set the sleep timer, in turn on mode, press  
SLEEP/TIMER repeatedly to select a set period  
of time (in minutes).  
Set the alarm timer  
» When sleep timer is activated, is  
displayed. Otherwise, disappears.  
This unit can be used as an alarm clock.You can  
select CD, FM, or USB as alarm source.  
Note  
Listen to an external device  
Make sure that you have set the clock correctly.  
You can listen to an external device through this  
unit with an MP3 link cable.  
1 In standby mode, press and hold SLEEP/  
TIMER for more than two seconds.  
» The hour digits are displayed and begin  
to blink.  
1 Press AUDIO IN repeatedly to select  
AUDIO IN source.  
2 Connect an MP3 link cable (not supplied)  
between:  
2 Press  
/
repeatedly to set hour, and  
AUDIO IN jack (3.5 mm) on the unit,  
and the headphone jack on an external  
device.  
then press SLEEP/TIMER.  
» The minute digits are displayed and  
begin to blink.  
3 Start to play the device (see the device  
3 Repeat step 2 to set minute, select a  
source (CD, FM, or USB), and adjust  
volume.  
user manual).  
Note  
SOURCE  
VOLUME  
If no button is pressed in 90 seconds, the system exits  
timer setting mode automatically.  
AUDIO IN  
AUDIO IN  
To activate or deactivate the alarm timer:  
Press SLEEP/TIMER repeatedly to activate or  
deactivate the alarm.  
» If timer is activated, is displayed.  
Tip  
If CD/USB source is selected, but no disc is placed or  
no USB connected, the system switches to the tuner  
source automatically.  
EN 11  
 
USB  
USB DirectVersion  
USB 5V Power  
7 Product  
information  
2.0 full speed  
≤500 mA  
Note  
Disc  
Product information is subject to change without prior  
LaserType  
Disc Diameter  
Support Disc  
Semiconductor  
12 cm/8 cm  
CD-DA, CD-R, CD-  
RW, MP3-CD  
24 Bits/44.1 kHz  
<1% (1 kHz)  
notice.  
Audio DAC  
Total Harmonic  
Distortion  
Specifications  
Frequency Response  
60 Hz - 16 kHz;  
±3 dB  
>70 dBA  
Amplifier  
Maximum Output  
Power  
70 W  
S/N Ratio  
Frequency Response  
60 Hz - 16 kHz;  
±3 dB  
General information  
AC power  
Operation Power  
Consumption  
Eco Standby Power  
Consumption  
Dimensions  
Signal to Noise Ratio  
Total Harmonic  
Distortion  
≥70 dB  
<1%  
100-240V~, 50/60 Hz  
100 W  
Aux Input  
600 mV RMS  
<0.5 W  
Speakers  
- Main Unit  
180 x 121 x 239 mm  
140 x 260 x 185 mm  
Speaker Impedance  
Speaker Driver  
Sensitivity  
8 ohm  
3.5" + 20 mm  
>84 dB/m/W  
(W x H x D)  
- Speaker Box  
(W x H x D)  
Weight  
- Main Unit  
- Speaker Box  
1.6 kg  
2 x 2.1 kg  
Tuner (FM)  
Tuning Range  
Tuning grid  
Sensitivity  
87.5-108 MHz  
50 KHz  
- Mono, 26dB S/N Ratio <22 dBu  
- Stereo, 46dB S/N  
Ratio  
<45 dBu  
Search Selectivity  
Total Harmonic  
Distortion  
<30 dBu  
<3%  
Signal to Noise Ratio  
>45 dB  
12 EN  
 
USB playability information  
Supported MP3 disc formats  
Compatible USB devices:  
ISO9660, Joliet  
Maximum title number: 128 (depending on  
file name length)  
Maximum album number: 99  
Supported sampling frequencies: 32 kHz,  
44.1 kHz, 48 kHz  
Supported Bit-rates: 32~256 (kbps),  
variable bit rates  
USB flash memory (USB2.0 or USB1.1)  
USB flash players (USB2.0 or USB1.1)  
memory cards (requires an additional card  
reader to work with this unit)  
Supported USB formats:  
USB or memory file format: FAT12, FAT16,  
FAT32 (sector size: 512 bytes)  
MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
Directory nesting up to a maximum of 8  
levels  
Number of albums/ folders: maximum 99  
Number of tracks/titles: maximum 999  
File name in Unicode UTF8 (maximum  
length: 32 bytes)  
Unsupported USB formats:  
Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and  
will not be shown in the display.  
Unsupported file formats are skipped. For  
example, word documents (.doc) or MP3  
files with extension .dlf are ignored and  
not played.  
WMA,AAC,WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
WMA files in Lossless format  
EN 13  
 
Reduce the distance between the remote  
control and the unit.  
Insert the battery with its polarities (+/–  
signs) aligned as indicated.  
Replace the battery.  
Aim the remote control directly at the  
sensor on the front of the unit.  
8 Troubleshooting  
Warning  
Never remove the casing of this device.  
No disc detected  
To keep the warranty valid, never try to repair  
the system yourself.  
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at  
the lens has cleared.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page  
(www.philips.com/support).When you contact  
Philips, make sure that the device is nearby  
and the model number and serial number are  
available.  
Replace or clean the disc.  
Use a finalized CD or correct format disc.  
Cannot display some files in USB device  
The number of folders or files in the USB  
device has exceeded a certain limit.This  
phenomenon is not a malfunction.  
The formats of these files are not  
supported.  
No power  
Make sure that the AC power cord of the  
device is connected properly.  
Make sure that there is power at the AC  
outlet.  
As a power-saving feature, the system  
switches off automatically 15 minutes after  
track play reaches the end and no control  
is operated.  
USB device not supported  
The USB device is incompatible with the  
unit.Try another one.  
Poor radio reception  
Increase the distance between the unit and  
yourTV orVCR.  
No sound or poor sound  
Fully extend the FM antenna.  
Adjust the volume.  
Check that the speakers are connected  
correctly.  
Timer does not work  
Set the clock correctly.  
Switch on the timer.  
Check if the stripped speaker wires are  
clamped.  
Clock/timer setting erased  
Power has been interrupted or the power  
cord has been disconnected.  
Reset the clock/timer.  
No response from the unit  
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
As a power-saving feature, the system  
switches off automatically 15 minutes after  
track play reaches the end and no control  
is operated.  
Remote control does not work  
Before you press any function button, first  
select the correct source with the remote  
control instead of the main unit.  
14 EN  
 
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
9 Notice  
Environmental information  
Any changes or modifications made to this  
device that are not expressly approved by  
WOOX Innovations may void the user’s  
authority to operate the equipment.  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
The USB-IF Logos are trademarks of Universal  
Serial Bus Implementers Forum, inc.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
The making of unauthorized copies of copy-  
protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
This apparatus includes this label:  
Note  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
The type plate is located on the back of the device.  
EN 15  
 
Specifications are subject to change without notice  
2013 ©WOOX Innovations Limited.All rights reserved.  
This product was brought to the market byWOOX Innovations Limited or one of its affiliates, further referred to in  
this document asWOOX Innovations, and is the manufacturer of the product.WOOX Innovations is the warrantor  
in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered  
trademarks of Koninklijke Philips N.V.  
MCM2150_12_UM_V3.0  
 

Peerless Industries TV Mount MM746PU User Manual
Pentax Camera Lens INTERCHANGEABLE LENS User Manual
Philips CD Player AX 5012 User Manual
Pioneer Stereo Amplifier D1200SPL User Manual
Plinius Audio Stereo Amplifier Odeon Power Amplifier User Manual
Porter Cable Saw 3700L User Manual
Poulan Tiller HDF550M User Manual
Powermatic Biscuit Joiner PJ1696 User Manual
Profile Indoor Furnishings 60 AMP BUSWAY User Manual
ProForm Home Gym PFCCEX34390 User Manual