Philips CRT Television Television TV User Manual

L9 1883.1 GB 1/8 15/11/00 13:10 Page 1  
Introduction  
Thank you for purchasing this television set.  
Please read the following instructions carefully to familiarise yourself with all  
the features available on your set.  
We hope our technology meets entirely with your satisfaction.  
Table of Contents  
Installation  
Presentation of the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
The keys on the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
The remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Tuning in to channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Selecting the menu language and the country . . . . . . . . . . . . . . . . . . . . . . .5  
Automatic store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
To renumber the programmes found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Naming the external socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Tuning in to FM radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Automatic tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
To renumber the radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Naming the radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Use  
Standard use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Choice ofTV or radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Selecting the programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Screen information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
TV light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Alarm function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Adjusting picture and sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Storing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Demonstration mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Locking the set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Peripherals  
Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
1
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 3  
The remote control keys  
Incredible Surround  
Sound mode  
To switch from FM STEREO (and  
NICAM STEREO) programmes to  
MONO or, for bilingual transmissions,  
Activates/de-activates the surround  
sound effect. In stereo, this gives  
the impression of the loudspeakers  
being further apart. In mono, a  
stereo spatial effect is simulated.  
to choose between DUAL  
DUAL (and NICAM-DUAL  
NICAM-DUAL  
f
and  
g
f,  
g
and mono).  
Standby  
To set theTV to standby mode.  
To switch the set back on, press  
Timer  
To select an automatic standby  
period (from 0 to 240 minutes).  
P
,
or j.  
Screen Information  
To display the screen information  
(p. 9).  
Select EXT socket (p.15) or  
to access the list of radio  
stations (p. 9)  
Numerical keys  
For direct access to programmes  
and teletext pages.  
Smart sound controls  
To access the preset sound modes:  
(CINEMA, MUSIC, SPEECH and  
return to PERSONAL  
Smart picture controls  
To access a series of settings:  
RICH (when the room is very  
light), NATURAL (optimum  
conditions) SOFT (when the  
room is very dark) and return to  
PERSONAL.  
Menu  
To call up or exit the menus.  
Note: the menus disappear  
automatically after 20 seconds if no  
further command is given.  
Cursor  
These 4 keys allow you to select  
the different menus  
Teletext (p. 14)  
or confirmation key (p. 7)  
Volume  
To adjust the sound level.  
Select programme  
Selects previous or following  
programme (p. 9).  
Mute  
To disable or enable the sound.  
Teletext keys (p. 14)  
Radio /TV Mode  
To switch between the Radio  
andTV mode (p. 9).  
Alarm off  
To turn off the alarm (p. 11).  
It will be reactivated 24 hours later at  
the programmed time.  
TV Light  
To activate / desactivate theTV  
light (p.10).  
Alarm menu  
To call up or exit the alarm  
menu (p. 11).  
Alarm on/off  
To switch the alarm  
function on or off (p. 11).  
The green ©light on the television  
set comes on when the alarm is  
activated.  
3
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 4  
Installing your television set  
5 cm  
æ Positioning your television set  
Place yourTV on a solid, stable surface, leaving a space of at least 5  
cm around the appliance.  
5 cm  
5 cm  
To avoid accidents, do not put anything on the set such as a cloth  
or cover, a container full of liquid (vase) or a heat source (lamp).  
The set must not be exposed to water.  
 Connecting the aerials  
The television set is supplied with 2 internal aerials; one for  
receivingTV channels, and the other for receiving FM radio  
stations.  
• Insert theTV aerial plug into theMsocket at the rear of the set.  
• Insert the radio aerial plug into the FM ANT socket.  
With portable aerials,the reception may be poor under certain  
conditions.You can sometimes improve it by repositioning the aerial. If  
the reception remains unsatisfactory, an external aerial should be used.  
FM ANT  
ê Connecting the power supply  
Insert the mains plug into the wall socket  
(220-240V / 50 Hz).  
® Remote control  
Insert the two R6-type batteries (supplied) making sure that they  
are the right way round.  
The batteries supplied with this appliance do not contain mercury or nickel  
cadmium. Please do not discard your used batteries if you have access to  
a recycling facility (if in doubt, consult your dealer). When the batteries are  
replaced, use the same type.  
Switching on  
To switch on the set, press the on/off key.  
A red indicator comes on and the screen lights up.  
If the television remains in standby mode, press P  
remote control.  
on the  
The hands of the clock move through 360° when the set is  
switched on for the first time.  
The indicator flashes when you use the remote control.  
4
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 5  
Tuning in to channels  
Selecting the menu language and the country  
æ Press the  
Remark: the set must be in tv mode (if not, press the j key).  
 Press once to select INSTALLATION, then press  
The INSTALLATION menu appears.The LANGUAGE option is activated.  
menu key.The main menu is displayed.  
q
q
q
TV LOCK  
TIMER  
.
INSTALLATION  
lllll 31  
'''''  
BRIGHTNESS  
CO
ê Use the  
keys to select your language.The menus appear in the  
language selected. If your language is not available, select ENGLISH.  
LANGUAGE ENGLISH  
COUNTRY  
GB  
® Press to select COUNTRY.  
AUTOSTORE  
q
Select your country using the  
keys (GB for Great Britain)  
Automatic store  
Carry out the above operations æ to , then :  
Ú Select AUTO STORE ( ) and press  
.Tuning in starts automatically.  
The operation takes a few minutes. A display shows the search status and  
the number of programmes found. When it has finished, the menu  
disappears and the last programme is displayed.  
q
q
q
TV LOCK  
TIMER  
INSTALLATION  
lllll 31  
'''''  
BRIGHTNESS  
COL
LANGUAGE ENGLISH  
If no programmes are found, refer to theTips chapter on p. 16.  
COUNTRY  
GB  
q
AUTOSTORE  
SORT  
º If the transmitter or the cable network broadcasts the automatic sort  
q
signal, the programmes will be correctly numbered.  
MA
î If not, the programmes found will be numbered in descending order starting  
at 59, 58, 57, etc. Use the SORT menu to renumber them.  
AUTOSTORE lllll 31  
'''''  
Some transmitters or cable networks broadcast their own sort parameters (region,  
language, etc.).Where this is the case, make your choice using the  
confirm with  
keys and  
.
To renumber the programmes found  
æ Press the  
menu key.The main menu is displayed.  
 Press once to select INSTALLATION, then press,  
.
q
q
q
TV LOCK  
The INSTALLATION menu appears.The LANGUAGE option is activated.  
TIMER  
INSTALLATION  
ê Press three times to select SORT and then press  
.
lllll 31  
'''''  
BRIGHTNESS  
COL
The SORT menu appears.The FROM option is activated.  
COUNTRY  
GB  
q
AUTOSTORE  
SORT  
® Select the programme you wish to renumber using keys  
or  
to  
.
q
Example: to renumber the programme 58 as 2, press  
.
MANUAL STORE  
q
Selection option A (key ) and enter the new number with keys  
or  
to  
(for the example given, press ).  
FROM  
78  
2
TO  
Ú Select TO (key ) and press  
.The message EXCHANGED appears, the  
EXCHANGE  
q
exchange takes place ( to cancel). In our example programme 58 is  
numbered as 2 (and programme 2 as 58).  
º Select the option FROM (key ) and repeat stages ®to Ú as many times  
as there are programmes to renumber.  
î To exit from the menus, press  
.
5
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 6  
Manual tuning  
This menu allows you to store the programmes one by one.  
æ InTV mode, press .This main menu comes up on the screen.  
 Press once to select INSTALLATION then press  
.
ê Select MANUAL STORE ( ) and press  
.
The MANUAL STORE menu appears.  
TV LOCK  
q
q
q
TIMER  
® Select SYSTEM (only available on certain models).  
Use to select, depending on the versions : FRANCE (standard LL’),  
WEST- EU (standard BG), EAST- EU (standard DK) or UK (standard I).  
Select SEARCH and press .The search begins.  
INSTALLATION  
BRIGHTNESS  
CO
lllll 31  
'''''  
AUTOSTORE  
SORT  
q
q
q
MANUAL STORE  
As a soon as a programme is found, the search will stop.  
If you know the frequency of the programme required, simply enter its  
SYSTEM  
SEARCH  
FINE TUNE  
AUTO  
168 MHz  
number using keys  
.
If no programme is found, refer to theTips chapter on p. 16.  
l
0
2
''''' '''''  
PROGRAM NO.  
STORE  
q
Ú If reception is unsatisfactory, select FINE TUNE and press  
or  
to fine  
tune.  
º Select PROGRAM NO. and enter the required programme number  
using or  
î Select STORE and press  
The message STORED appears.The programme has been stored.  
œ Repeat steps to î as many times as there are programmes to store.  
.
.
To exit the menus, press  
.
Naming the external socket  
æ InTV mode, press  
.The main menu is displayed on-screen.  
 Press once to select INSTALLATION and press  
.The INSTALLATION  
q
q
q
TV LOCK  
TIMER  
menu appears.  
INSTALLATION  
lllll 31  
'''''  
ê Use the key to select EXTERNAL and press  
to bring up the menu.  
BRIGHTNESS  
COL
SORT  
You have access to a series of names which allow you to customise the  
names of the external socket. When you next select an external socket, its  
chosen name will be displayed for a few seconds.  
q
q
q
MANUAL STORE  
EXTERNAL  
® To exit from the menus, press  
.
6
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 7  
Tuning in to FM radio stations  
Automatic tuning  
æ Press j on the remote control to change to radio mode.The screen  
goes blank.  
 Press to bring up the main menu.  
The menu appears with the INSTALLATION option highlighted.  
ê Press .The INSTALLATION menu appears with the AUTOSTORE option  
highlighted.  
BASS  
lllll 35  
'''''  
WAKEUP  
INSTALLATION  
VOLUME  
q
q
lll  
7
''''''''  
BAL
® Press .The search begins.The operation takes a few minutes.The display  
demonstrates the progession of the search and the number of FM stations  
found. When it has finished, the INSTALLATION menu reappears  
automatically.  
AUTOSTORE  
SORT  
MA
q
q
AUTOSTORE lllll 12  
'''''  
If no stations are found, refer to theTips chapter on p. 16.  
You can now, if you wish, store and number your stations as required: see  
the following chapter.  
Ú To exit the menus, press  
.
To renumber the radio stations  
æ Ensure that the set is in radio mode (j key).  
 Press .The list of radio stations appears with their frequencies.  
You can also access this list via the SORT menu in the INSTALLATION menu.  
ê Use or to select the radio station you wish to renumber.  
Example: to renumber station 6 as 1: press  
To access other radio stations, select <> (using ) and press  
following pages or for the previous pages.  
® Press to confirm.The line is displayed in white.  
Select the radio station you wish to change with.  
In our example, press  
BASS  
lllll 35  
'''''  
WAKEUP  
INSTALLATION  
VOLUME  
q
.
q
to display the  
l
0
''''''''''  
BAL
AUTOSTORE  
SORT  
MANUAL STORE  
< >  
q
q
q
1
2
3
4
5
103.50  
103,90  
96.00  
.
Ú Press  
to confirm.The line is displayed in white.  
to confirm. Radio station No. 6 is renumbered as 1  
101.90  
102.30  
º Press OK  
(and No. 1 as 6).  
î Repeat steps ê to º as many times as there are stations to renumber.  
œ To exit the menus, press  
.
7
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 8  
Manual tuning of the radio stations  
æ Ensure the television set is in radio mode (j).  
 Press to bring up the main menu.  
The menu appears with the INSTALLATION option activated.  
BASS  
lllll 35  
'''''  
WAKEUP  
INSTALLATION  
VOLUME  
q
q
ê Press  
.The INSTALLATION menu appears.  
lll  
7
''''''''  
BAL
® Press twice to select MANUAL STORE and press  
.
AUTOSTORE  
q
q
q
SORT  
THE MANUAL STORE menu appears.  
MANUAL STORE  
Select SEARCH and press  
.The search begins.As soon as an FM radio  
station is found, the search will stop.  
If you know the frequency of the station required, simply enter its number  
SEARCH  
100.50  
q
using keys  
Example: for 98 MHz press  
.
PRESET NO  
STORE  
4
.
If no station is found, refer to theTips chapter on p.16.  
Ú Select PRESET NO and enter the required station number using  
or  
.
º Select STORE and press  
.
The message STORED appears.The programme has been stored.  
î Repeat steps to º as many times as there are programmes to be  
stored.  
œ To exit the menus, press  
.
Naming the radio stations  
If you wish, you can name the first 5 radio stations (1 to 5).  
æ Ensure the television set is in radio mode (j).  
 Select the programme you wish to name.  
ê Press  
to bring up the main menu.  
The menu appears with the INSTALLATION option activated.  
® In the INSTALLATION menu, then MANUAL STORE menu, select NAME  
and press  
.
Use the  
keys to move around in the area which displays the name (5  
keys to select the characters.  
once the name is entered.The name of the station is stored.  
º Repeat the operation for each radio station you wish to name.  
î To exit the menus, press the key.  
characters). Use the  
Ú Press  
8
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 9  
General use  
Choice of TV or radio mode  
Your set may receive bothTV programmes and FM radio stations.  
The j key on the remote control is used to switch betweenTV mode  
and radio mode.  
RADIO  
TV mode  
TheTV programmes appear on-screen.  
Radio mode  
π
°
~
¬
ON/OFF  
SET  
RESET  
ALARM  
The television screen is off.The sound from the radio comes out of the  
speakers on the left and right of the set.  
Note: in radio mode, the  
key gives direct access to a limited number of  
settings and the INSTALLATION menu is specific to the radio reception.  
Selecting the programmes  
TV mode  
Use the P  
or  
keys to select the programmes (from 0 to 59).  
The number and sound mode are displayed for a few moments on the  
B
screen.To compose a two-figure number using the numerical keys  
add the 2 figure before the hyphen disappears.  
,
Z
e
I.S.  
/
nd  
1
4
7
2
5
8
0
3
6
9
The title of certain programmes appears for a few moments at the bottom of the  
screen.To view a programme that has been locked, enter the confidential code  
(see p. 13).  
SMART  
é
È
Radio mode  
Use the P  
MENU  
OK  
L
or  
keys to select the FM radio stations (from 1  
to 40).The number, frequency and sound mode are displayed for a few  
seconds before the screen goes blank.  
List of radio stations  
c
P
a
In radio mode, the  
can then use the or keys to change the station.  
To change the page, select <> (using ) then press or  
or following pages. You can also modify how the stations are stored (see p. 7).  
key dislays or clears the list of radio stations.You  
to display the previous  
Screen information  
TV or radio mode  
Press to display for a few seconds or clear the programme number,  
B
time and sound mode. In radio mode, the frequency of the station is also  
displayed.  
Z
e
I.S.  
/
1
4
7
2
5
3
6
Permanent display of the programme number  
Press  
for five seconds to activate the permanent display of the  
programme number. Press once to cancel.  
9
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 10  
TV light  
The feet and clock of the television set are luminous and backlit.  
B
æ Use the  
key on the remote control to switch the lighting on and off .  
Z
e
I.S.  
/
 Use the  
keys to increase or decrease the intensity of the 3 levels of  
1
4
7
2
5
8
0
3
6
9
lighting.  
Note: the lighting controls are independent of the television controls (it may be in  
TV, radio or standby mode). However the lighting does not operate when the set is  
switched off using the on-off key.  
SMART  
é
È
MENU  
OK  
L
c
π
P
a
RADIO  
~
°
¬
ON/OFF  
SET  
RESET  
ALARM  
Setting the clock  
The television set is equipped with an analogue clock on the front of the  
set. It is set using the menus.  
Automatic reset:  
The time is automatically reset, each time the set is switched on, using  
teletext information taken fromTV programme 1.  
• If it does not have teletext, the time will not be updated.  
• If the appliance has been disconnected from the mains, the hands on the  
clock will move through 360° when switched on.  
The television set is equipped with a backup system which stores the time when  
the appliance is disconnected from the mains.  
To manually set the clock:  
æ Press  
SET ALARM on the remote control.  
The CLOCK menu is displayed on the screen.  
 Press once to select SET CLOCK.  
SET CLOCK  
START TIME  
MODE  
17:08  
07:10  
q
ê Enter the current time using  
clock is updated a few seconds later.  
® Press SET ALARM again to exit the menu.  
Changing the time:  
or  
.The time on the analogue  
For countries which change their clocks twice a year (summer time, winter  
time), the clocks are reset automatically using the teletext information  
taken from programme 1. However, the time is only updated when the  
television set is switched on.  
10  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 11  
Alarm function  
This function allows you to use yourTV as an alarm clock  
.
You can programme your alarm to wake you up to theTV, radio or 3  
different melodies.  
Setting the alarm  
æ Press  
SET ALARM on the remote control.  
The ALARM menu is displayed on the screen.  
SET CLOCK  
START TIME  
MODE  
17:20  
07:10  
q
You can also access this menu by pressing  
, then selecting the ALARM option.  
VOLUME  
l
2
''''''''''  
 If you want to set the time on the clock, select SET CLOCK and enter the  
TV PROGRAM  
RADIO PRESET  
ALARM  
1
2
current time using keys  
or  
.
Important: the time is reset automatically each time the set is switched on using  
teletext information taken from programme 1. If programme 1 does not have  
teletext, the update will not take place. If you modify the time, the analogue clock  
on the set will be reset a few seconds later.  
q
MORNING BIRD  
RAINFOREST  
FALLING STAR  
ê Select START TIME and enter the time at which the set is to switch on using  
the keys  
.
® Select MODE and press  
. Now choose the mode in which you want your  
set to wake you up.  
Select TV PROGRAM, RADIO PRESET or ALARM then enter the number of  
theTV or radio programme or choose between 3 different melodies  
(
MORNING BIRD, RAINFOREST or FALLING STAR).  
Note: it is the last setting selected that will be used for the alarm.  
B
Ú Press  
to return the first level of the ALARM menu.  
Z
e
I.S.  
/
º Select VOLUME and adjust the level required for the alarm.  
1
4
7
2
5
8
0
3
î Press  
to exit the menu.  
6
Activating the alarm  
9
SMART  
È
SMART  
æ Press  
de-activate the alarm function.The green © indicator on the set comes  
on when the alarm is on.  
 Press to put the set into standby mode. It will switch on automatically at  
ALARM ON/OFF on the remote control to activate or  
é
MENU  
OK  
L
the programmed time and mode. The light also comes on when the alarm  
comes on.  
c
P
a
ê If you leave the set switched on, it will merely change mode and  
programmes at the set time.  
Caution: for the alarm to work, do not switch off the set using the on-off button  
on the front of the set.  
RADIO  
~
π
°
The set switches to standby automatically after 4 hours if no further commands  
are given.  
¬
ON/OFF  
SET  
RESET  
ALARM  
Switching off the alarm  
æ When the alarm is on, press  
RESET (or  
) on the remote control to  
switch off. It will start up automatically 24 hours later at the programmed  
time.  
In the ALARM mode, press any key to interupt the alarm, It will repeat 5 minutes  
later, otherwise the alarm will run for 30 seconds before switching off for 5 minutes  
and then run for 30 seconds before stopping completely.  
 If you wish to turn off the alarm function completely, press  
ALARM  
ON/OFF.The © indicator is switched off.  
11  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 12  
Adjusting picture and sound  
Adjusting the picture (the set must be inTV mode).  
Press  
. Use  
and  
to adjust: BRIGHTNESS, COLOUR, CONTRAST,  
SHARPNESS,TINT, CONTRAST+ and NOISE RED  
SHARPNESS: alters the crispness of the image.  
.
BRIGHTNESS  
COLOUR  
lllll 31  
'''''  
lllll 31  
'''''  
lllll 31  
'''''  
lllll 31  
'''''  
CONTRAST  
SHARPNESS  
TINT  
TINT: alters the colour balance.There are three options: COLD (blue tint), NORMAL  
(balanced) or HOT (red tint).  
NORMAL  
• CONTRAST+: automatically adjusts the contrast of the image according to content  
(the darkest part of the image is always black).  
• NOISE RED: alleviates picture noise (snowy picture).This setting is useful when  
reception is difficult.  
Adjusting the sound  
Press  
and AVL.  
.
Use  
and  
to adjust: DELTA VOL,BALANCE,TREBLE, BASS  
DELTA VOL  
BALANCE  
TREBLE  
BASS  
l
0
0
''''' '''''  
l
''''' '''''  
lllll 31  
• DELTA VOLUME (volume difference): allows you to compensate for the volume  
differences between the different programmes or the EXT sockets.This adjustment is  
available for programmes 1 to 40 and the EXT sockets.  
'''''  
lllll 35  
'''''  
AVL  
lll  
25  
'''''''  
• AVL (Automatic Volume Leveler): automatic volume control used to avoid sudden  
increases in volume, particularly when changing programme or during  
advertisements.  
Storing settings  
You can store your own sound and picture settings.  
æ First carry out your menu settings.  
BASS  
lllll 35  
'''''  
AVL  
lll  
25  
'''''''  
 Next, select PERSONAL and press  
.The message STORED appears.  
PERSONAL  
TV LOCK  
DEMO  
OFF  
q
The settings are stored.  
ON  
Values are saved under PERSONAL in the Smart sound and picture controls  
and ).  
(
Note: volume and DELTA VOLUME are automatically stored after a change of  
programme or when the set is put in standby.They do not need to be stored in the  
PERSONAL menu.  
Demonstration mode (the set must be inTV mode).  
This function displays the main functions of the television set.  
æ Press to bring up the main menu.  
 Select DEMO and press to switch the mode to ON.  
PERSONAL  
TV LOCK  
DEMO  
q
q
ON  
q
TIMER  
ê Press  
to put the set on standby.  
INSTALLATION  
q
® Press P  
to switch on and activate the demonstration mode.The main  
functions of the television set are displayed in a continuous sequence.  
To stop the demonstration, press any key on the remote control.  
Be careful when switching on as the demonstration will start up automatically.  
Ú To de-activate the demo mode, switch the DEMO menu to OFF.  
12  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 13  
Locking the set  
This function allows you to lock the set in order to limit its use completely or  
partially.This menu can only be accessed when the set is inTV mode.  
Key lock  
AVL  
lll  
25  
'''''''  
PERSONAL  
TV LOCK  
TIMER  
OFF  
æ
Press  
,select TV LOCK ( ) and press  
.
q
q
 Set the LOCK to ON.The keys are locked.  
INS
ê Switch off the set and put the remote control out of site.The set cannot be  
used (it can only be switched on using the remote control).  
LOCK  
OFF  
PARENTAL CONT.  
q
To cancel: switch LOCK to OFF  
.
Programme lock  
This menu allows you to partially or fully lockTV programmes. Radio stations  
cannot be locked.  
LOCK  
PARENTAL CONT.  
OFF  
æ
Â
ê
Press  
,select TV LOCK ( ) and press  
.
q
Select PARENTAL CONT. and press  
.
Enter your confidential access code.The first time, enter the code 0711 then  
confirm by re-entering 0711.The menu appears.  
ACCESS CODE  
- - - -  
®
Select PROGRAM NO. and use keys  
to enter the number of the  
programme. Use  
if you wish to lock the EXT sockets.To lock all of them,  
select ALL.  
CHANGE CODE XXXX  
PROGRAM NO.  
LOCK  
1
NO  
q
Ú
Select LOCK then YES.  
CLEAR ALL  
Repeat steps  
5 programmes separately.  
Press to exit.To watch a programme which has been locked you will now  
need to enter the confidential code;otherwise the screen will remain blank.  
When a locked programme is displayed, use the keys to access other  
programmes (the keys are used to enter the code).  
®
and  
for each programme to be locked.You can lock  
º
P
Caution: in the case of encrypted programmes which use an external decoder, it is  
necessary to lock the corresponding EXT socket (and not the programme number).  
To unlock all programmes  
Repeat stages  
æ
to  
ê
above, then:  
. All programmes are unlocked.  
®
Select CLEAR ALL and press  
To change the confidential code  
Repeat steps  
æ
to  
ê
above, then:  
®
Select CHANGE CODE and enter your own 4-digit code.  
Confirm by entering it again.Your new code will be stored.  
If you have forgotten your confidential code, enter the universal code 0711 twice.  
To exit:  
Press  
.
13  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 14  
Teletext  
Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It  
also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language  
in which a particular programme is being broadcast (cable networks, satellite channels, etc.).  
Caution :This set is not fitted to display the special characters of every languages. In certain countries, the  
teletext pages will not be displayed properly.  
Press:  
To obtain:  
Switch teletext  
on/off  
To call up or exit from teletext. At first, the main  
index page appears with a list of the items available.  
Each page has a corresponding 3-figure number.  
If the selected channel does not broadcast teletext, 100 will  
appear and the screen will remain blank (in this case, exit  
from teletext and choose another channel).  
L
B
Z
e
I.S.  
/
1
4
7
2
5
8
0
3
6
9
Selecting a  
teletext page  
0
9
Use keys  
to  
or  
to enter the page number  
required. For example: for page 120, press  
.
SMART  
SMART  
The number is displayed in the top-left corner, the page  
counter starts searching and the page is displayed.  
Repeat the procedure to consult another page.  
If the counter continually searches, this means that the  
selected page is not broadcast. Choose another number.  
é
È
MENU  
OK  
L
Direct access to  
subject headings  
Coloured zones are displayed at the bottom of the  
screen.The 4 coloured keys give access to the  
corresponding subjects or pages.  
c
P
a
The coloured zones flash when the subject or the page is  
not yet available.  
RADIO  
~
π
°
~
π
°
Temporary  
on/off  
To switch teletext temporarily on/off.  
¬
ON/OFF  
SET  
RESET  
Page  
enlargement  
Press this key to display the upper then lower part of  
the screen, and then return to the normal page size.  
ALARM  
Stop the  
sequence of  
sub-pages  
Some pages contain sub-pages which follow on  
automatically from one another. This key allows sub-  
page sequence to be interrupted.  
The I appears in the top left hand corner.  
¬
Superimposition  
Reveal  
To activate or de-activate screen overlay.  
Use this key to reveal/conceal hidden information  
(answers to puzzles).  
MENU  
Favourite pages  
For teletext programmes 1 to 41, you can store  
4 favourite pages which you can then access via the  
coloured keys  
.
/
æ Press  
.
 Enter the number of the page required.  
Press then the coloured key of your choice.  
The page is stored.  
ê
® Repeat steps  and ê for the other coloured  
keys.  
From now on, when you consult teletext, your  
favourite pages appear in colour at the bottom of  
the screen.To get back to the normal subject  
headings, press  
.
To remove these settings, hold  
for 3 seconds.  
14  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 15  
Connecting other appliances  
Video recorder  
Video recorder (only)  
Connect as shown using a good quality euroconnector  
cable.  
If your video recorder does not have a euroconnector socket, the  
only connection possible is via the aerial cable. You will therefore  
need to tune in your video recorder test signal and assign it to  
programme number 0 (see manual store. p. 6).To reproduce the  
EXT 1  
video recorder picture, press  
.
Video recorder with decoder  
Connect the decoder to the second euroconnector on the  
video recorder.You can then record scrambled  
transmissions.  
Other equipment  
You can connect any other apparatus to the EXT socket  
(satellite receiver, decoder, DVD, games, etc.).The socket  
has audio and video input/outputs and RGB inputs.  
EXT 1  
Headphones  
The headphones socket is on the right-hand side of the set. When  
the headphones are plugged in, the sound on the set is cut off.  
Adjust the volume using the  
a
keys on the remote  
control or the keys on the television.  
a
The headphones must have an impedance of between 32 and  
600 ohms.  
n
B
To select connected equipment  
e
I.S.  
/
Z
Press  
to select the EXT socket.  
1
4
2
5
3
6
The switching is automatic on most appliances (decoder, etc.).  
15  
 
L9 1883.1 GB 1/8 15/11/00 13:10 Page 16  
Tips  
Poor reception or no picture  
The proximity of mountains or high buildings can cause ghost pictures, echoing or  
shadows. If this is the case, try re-positioning the aerial or use an external one.Try using  
FINE TUNE (p. 6), ensure the right system is selected (p.6)?  
Check that the aerial plug or euroconnector is properly connected Check also that the  
.
aerial is capable of receiving broadcasts in this frequency range (UHF orVHF)?  
Is the set inTV mode? Press j.  
Adjusting the picture  
If the picture is out of focus, or if you are having difficulties finding the right settings, select  
one of the Smart picture controls  
(p.12).  
(p. 3) and store it using the PERSONAL setting  
In case of bad reception (fuzzy picture), set the NOISE RED to ON (p. 12).  
The picture is in black and white  
To replay a video cassette, check that it is recorded in the same format as that of the  
video recorder (PAL, SECAM or NTSC). Check the colour setting in the menu.  
No sound  
If certain programmes have a picture but no sound, it is most likely that the correctTV  
system has not been selected (p. 6).  
In radio mode, check that the aerial is properly connected. If reception is poor, use an  
external aerial.  
Standby  
When you switch on the set, if it remains in standby mode and the LOCKED message is  
displayed, this means that the LOCK function is activated (p. 13).  
The set switches automatically to standby if it receives no signals for a period of 15 minutes  
To save electricity, your set is equipped with low energy consumption components which limit  
energy consumption when the set is on standby (less than 3W).  
.
Still having problems?  
If the set breaks down, never try to repair it yourself. Consult your after-sales service  
department instead.  
Recycling  
The materials used in your set are either reusable or can be recycled.  
To minimise environmental waste, specialist companies collect appliances and  
dismantle them, retrieving any materials that can be used again  
(ask your dealer for further details).  
ß
16  
 

Peavey Stereo Amplifier 650 004 User Manual
Perreaux Stereo Amplifier SXH2 User Manual
Philips Computer Monitor LO9B60 User Manual
Philips Flat Panel Television BDS4624R 00 User Manual
Philips Hair Dryer HP4882 User Manual
Plinius Audio Stereo Amplifier 8200 MkII User Manual
Poulan Trimmer 530088896 User Manual
Poulan Trimmer TE 400 CXL User Manual
Powermatic Welder DT45 User Manual
PVI Industries Electric Heater PV 6113b User Manual