Philips CD Player 44 User Manual

Thank you for purchasing this Philips Elegance 44 Speaker/  
Telephone. Your Elegance 44 is designed with advanced state-  
of-the-art technology for user-friendliness and convenience.  
To change from Handset to Handsfree conversation:  
I. SETTING YO UR ELEGANCE 44  
Choosing Your Dial Mode  
Elegance 44 has 2 dial modes: “tone” and “pulse”. The factory  
default setting is in “pulse”, but if you are connected to an electronic  
central exchange, you should use “tone” mode. For more  
information, refer to your switchboard provider.  
III. MAKING YO UR CALLS  
1. Press once the Speaker On/Off button (Speaker On/Off  
indicator will light up).  
2. Restore the handset. After you finish, press once the Speaker  
On/Off button.  
You can make your calls by either dialling on the Dial Keypad or  
from stored memories. Adjust the Volume Slider to your desired  
conversation volume level.  
FEATURES O F YO UR ELEGANCE 44  
14.  
15.  
1.  
2.  
3.  
4.  
Note: To pause while dialling:  
Your telephone may be connected to certain switchboard or  
using network services that may require you to insert a pause  
while making calls. To insert a pause while making calls,  
press once the REDIAL button whenever required.  
Steps to change your dial m ode:  
5.  
6.  
7.  
8.  
9.  
10.  
You can change your dial mode to either “tone” or “pulse” mode  
by adjusting the Tone/Pulse switch at the bottom of the telephone.  
Note: If there is an incoming call during your phone conversation,  
press once the Recall button to take it. You can resume to  
your previous phone conversation by pressing once the Recall  
button again. For more information about the Recall feature  
and TBR settings, refer to the network provider.  
Choosing Your Recall Mode  
There are 2 recall modes: “Earth Recall (ELR)” and “Time Break  
Recall (TBR)”. The factory default setting is in “TBR”, and the  
telephone should remain in TBR setting unless it is connected to  
a switchboard requiring ELR signalling. For more information,  
refer to the switchboard provider.  
13. 12. 11.  
Keypad Dialling  
1. Lift the handset or press once the Speaker On/Off button.  
2. Dial the number you want to reach. After you finish, restore  
the handset or press once the Speaker On/Off button.  
17. 16.  
1. Volume Slider  
10. Speaker On/Off indicator  
11. Speaker Mute button  
12. Speaker Mute indicator  
13. Recall button  
Steps to change your recall m ode:  
2. Direct Memory buttons  
3. Store button  
You can change your recall mode to either “ELR” or “TBR” by  
adjusting the TBR/ELR switch at the bottom of the telephone.  
4. Dial Keypad  
14. Handset Mute button  
15. Speaker  
16. Tone/Pulse switch  
17. TBR/ELR switch  
5. Ringer indicator  
6. Phonebook button  
7. Ringer Volume switch  
8. Redial button  
1
3
5
7
9. Speaker On/Off button  
Latching Privacy  
When you are being interrupted during your phone conversation,  
you can choose not to let the caller hear about the interruption.  
Although the caller cannot hear you, you can still hear your caller.  
Last Num ber Redialling  
You can redial the last number dialled.  
1. Lift the handset or press once the Speaker On/Off button.  
2. Press once the Redial button. After you finish, restore the  
handset or press once the Speaker On/Off button.  
INSTALLING YO UR ELEGANCE 44  
II. ANSW ERING YO UR CALLS  
Plug the telephone line cord into the telephone line wall socket.  
When your Elegance 44 rings, you can adjust the Ringer Volume  
switch to your desired ringer volume level. Adjust the Volume  
Slider to your desired conversation volume level.  
W hen using the handset:  
Note: The last number dialled can only be redialled if the Redial  
button is the first key pressed after seizing the line. Otherwise,  
when pressed after any keys, the Redial button will serve as  
“Pause”.  
To answer calls by the handset:  
Press and hold the Handset Mute button. Cancel the mute  
function by releasing the Handset Mute button.  
Lift the handset. After you finish, restore the handset.  
Note: After connecting, pick up the handset and listen to the dial  
tone to ensure that installation is successful. You can now  
make and receive telephone calls.  
W hen using the Speaker:  
Press once the Speaker Mute button. Cancel the mute function  
by pressing once the Speaker Mute button.  
Table-top support  
Mem ory Dialling  
There are 2 types of memory dialling: direct one-touch and indirect  
dialling.  
To m ake calls by the Speaker:  
Press once the Speaker On/Off button. After you finish, press  
once the Speaker On/Off button.  
Reminder: You should have stored phone numbers into memories  
before you can operate this type of dialling. For storing  
phone numbers, see topic IV.  
Wall-mount support  
2
4
6
8
 

Peavey Guitar Axcelerator 5 User Manual
Pelco Automobile Accessories CX9000 User Manual
Pelco Satellite Radio FR8316 User Manual
Philips DVR VR270B User Manual
Philips Mouse SPM2702BB User Manual
Pioneer Stereo Amplifier PRS A900 User Manual
Polar Heart Rate Monitor GBR 175015A User Manual
Poulan Trimmer 115249426 User Manual
ProForm Home Gym 831285440 User Manual
ProScan Flat Panel Television 26LB30QD User Manual