Phase Technology Portable Speaker SPF 25 User Manual

secured and the wires attached, the speaker may be attached to the clamp  
using the provided adjustment knobs. Hold the speaker at the desired angle  
and tighten the knobs. Exercise care to avoid over-tightening the screws.  
Always loosen the retaining knobs before attempting to change the  
speaker angle.  
PHASE TECHNOLOGY Solaris speaker  
Congratulations on the purchase of your new Phase Technology speaker  
system. With minimal care, your new system will provide years of  
enjoyment. Please take a few minutes to read this manual, which will  
explain proper placement and connection.  
Caring for your speakers – Outdoor use.  
Your Solaris speakers are engineered for both indoor and outdoor use and  
operations. Random water hitting the speaker will not damage your Solaris  
speakers making it ideally suited for placement in close proximity to  
swimming pools and spas. The Solaris speaker is not intended for use  
underwater.  
The Solaris speaker is designed for indoor and outdoor playback of music  
and home theater sources. Each speaker includes a convenient C-clamp and  
pre threaded inserts for use with most standard swivel mounts. And with UV-  
resistant, paintable, composite enclosures and aluminum grilles, Solaris will  
look as good as it sounds through years of outdoor exposure.  
Connections  
Ordinary dust and dirt accumulation will not harm the Solaris speaker. If  
you wish to clean the Solaris speaker, household glass cleaning solution  
sprayed on a paper towel may be used for light cleanup. For heavier stains, a  
soap and water solution applied with a rag or sponge should remove the dirt  
and stains. Avoid spraying the Solaris speaker with a high-pressure hose.  
Before making any connection, make sure your amplifier or receiver’s power  
is turned off. Each speaker has a red (+) terminal and a black (-) ground  
terminal, which will match the speaker output terminals on your amplifier or  
receiver. Correctly connecting red to red and black to black from your  
amplifier to your speaker will insure correct phase connection. We  
recommend 16 gauge or heavier wire for the best performance from your  
speakers. Choose speaker wire that defines each conductor with color-  
coding or texture on at least one of the two wire leads to assure proper phase  
connection.  
Subwoofer Connections  
You may choose to use a subwoofer with your Solaris speaker to enhance the  
bass response of your music system. There are two ways to connect the  
Solaris speaker with a powered subwoofer. The first uses the sub-out  
connection. This type of output utilizes RCA connectors. NOTE: Most  
processors and receivers have a single (mono) Sub-out. Connect the  
Subwoofer output from your receiver or processor to either the left  
input or the right input on your subwoofer amplifier. Then follow the  
section titled Connections to hook up your Solaris speakers.  
Wall Mounting  
The C-clamp assembly is pre-drilled for fastening to a shelf, wall or ceiling.  
Before mounting the Solaris speaker to a wall or ceiling, it is important to  
consider the surface material the speaker will be mounted on. If you intend  
to mount the speaker to wood, traditional 1" long wood screws will secure  
the speaker properly. Mounting to stucco, plaster, concrete or drywall will  
require additional measures to properly secure the speaker to one of these  
surfaces. Consult your Phase Technology dealer for assistance.  
The second option, High Level (speaker level), connects the subwoofer  
utilizing the speaker output terminals of the amplifier or receiver. For this  
hook-up method you will need two sets of speaker wires coming out of the  
left and right outputs on your amplifier or receiver. One set goes to the  
subwoofer and the other to the right and left input on your Solaris speakers.  
You will find it much easier to mount the speaker if you first remove the  
speaker from the C-clamp. With the speaker removed from the C-Clamp, use  
the C-clamp as a template to locate the desired speaker placement. Hold the  
C-clamp at the location the speaker is to be mounted, then mark the  
mounting holes with a pencil. Secure the clamp to the mounting surface with  
the appropriate screws.  
Service Issues and Warranty  
Phase Technology has an uncompromising commitment to quality assurance.  
In the unlikely event that a problem occurs with your Solaris speaker, please  
contact your Phase Technology dealer. Your new Solaris speaker comes  
with a warranty to protect you, the original purchaser, against defects in  
material and workmanship. Please refer to the warranty card included with  
this manual.  
NOTE: For a ceiling or wall mounting, it is recommended to center the  
base on a stud or wood frame member within your structure whenever  
possible. Before you place the speaker on the clamp, connect the speaker  
wire to the terminals on the back of the speaker. Once the clamp is properly  
 

Pentax Camcorder PV C909A User Manual
Philips CD Player 150X4 User Manual
Philips CRT Television 14PT1365 User Manual
Philips VCR VR200 58 User Manual
Polycom Telephone Telephone User Manual
Porter Cable Saw FTS 150 User Manual
Powermate Portable Generator PMC523202 User Manual
Procom Gas Heater ML300HGA User Manual
Promise Technology Network Hardware E310f User Manual
PYLE Audio CD Player PLCD27 User Manual