Pelco TV Mount LB1000DC User Manual

C292M-A (3/00)  
LB1000MT Wall Mount for  
LB1000/LB1012/LB1000DC VCR Lock Box  
3500 Pelco Way,  
Clovis, CA 93612-5699  
USA  
DESCRIPTION  
This manual covers the installation of the LB1000MT mounting brackets necessary for wall  
mounting the LB1000/LB1012/LB1000DC VCR Lock Box.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
Please make sure your LB1000MT kit contains the following parts:  
1
1
4
4
LBMT104001COMP – Right-side wall mount bracket  
LBMT104002COMP – Left-side wall mount bracket  
ZH1/420X.375SPP – Screws for securing mount to lock box  
ZH1/4LWSIS – Internal lock washers  
International Customers:  
Tel +1 (559) 292-1981  
FAX +1 (559) 348-1120  
INSTALLATION  
The LB1000MT kit is designed for wall mounting the LB1000/LB1012/LB1000DC horizontal  
VCR lock box. All necessary hardware for mounting the support brackets to the lock box has  
been provided.  
To install the LB1000MT mounting brackets, perform the following steps:  
NOTE: Because wall surfaces  
differ, the necessary hardware  
for mounting the unit to the wall  
has not been supplied.  
1. For adequate room and ease of handling, remove the VCR unit from the VCR lock box  
before installing the mounting brackets to the lock box.  
2. Remove the rubber feet from the bottom of the lock box – notice the set of mounting  
holes located next to the rubber feet holes in the bottom of the lock box. This inside set of  
holes will be used in installing the mounting brackets.  
CAUTION: Use only appropri-  
ate and securely-fastened  
3. Line up the PEM nuts in the LB1000MT wall bracket with the holes in the bottom of the  
lock box. Install as shown in Figure 1, using the provided screws and lock washers to  
securely install the lock box to the mounting brackets.  
mounting bolts for mounting the  
unit to a wall. The combined  
weight of the LB1000/LB1012/  
LB1000DC lock box, LB1000MT,  
and an average VCR can easily  
exceed 60 pounds (27.18 kg).  
4. Make sure the bracket has been securely installed.  
5. Mount the combined lock box and mounting bracket unit to the wall surface. (See note.)  
When properly installed, the  
LB1000MT provides a 16-inch  
spread to the mounting hole pat-  
tern, allowing for the brackets to  
be securely mounted to stan-  
dard wall studs.  
6. Make sure the wall mount is secure. Mount the VCR into the lock box and make all nec-  
essary connections.  
Figure 1. LB1000MT Wall Mount Installation  
 

Pentax Binoculars 822 User Manual
Philips Baby Monitor SCD470 User Manual
Philips Computer Monitor HWS8200Q User Manual
Philips Flat Panel Television 15HF5234C User Manual
Philips Flat Panel Television RFX6500 User Manual
Philips Portable DVD Player PD7022 User Manual
Philips Projector bSure 2 User Manual
Philips TV Video Accessories SVC2541W User Manual
Philips Washer 191EW9 User Manual
POSIFLEX Business Machines Computer Monitor KS 6812 User Manual