Pelco Stereo Receiver C1662M A User Manual

I N S T A L L A T I O N  
TW3000P Series  
Passive Multichannel  
Video Transceivers  
C1662M-A (1/06)  
 
Description  
The TW3000 Series multichannel video transceivers can transmit multiple video signals over unshielded  
twisted pair (UTP) cable. The receivers are passive and require no power. The transceivers are available  
with 8, 16, or 32 channels and can be mounted into an industry standard 19-inch (48.26 cm) wide  
equipment rack. Each model has built-in surge suppression.  
The transceivers can be used at the camera and/or monitoring location. They allow for easy  
connectivity with any video source or destination device, such as cameras, monitors, and matrix  
switchers. These multichannel transceivers will transmit video (color/black-white) and Coaxitron®  
(up-the-coax) PTZ control signals on the same pair of UTP wires.  
MODELS  
TW3008P  
TW3016P  
TW3032P  
8-channel passive video transceiver  
Same as TW3008, except 16 channels  
Same as TW3008, except 32 channels  
C1662M-A (1/06)  
3
 
BACK VIEW  
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
TW3008P  
1
2
3
4
5
6
7
8
9
10 11 12  
13 14 15 16  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
TW3016P  
1
2
3
4
5
6
7
8
9
10 11 12  
13 14 15 16  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
13  
29  
14  
30  
15  
31  
16  
32  
17 18 19 20  
21 22 23 24  
25 26 27 28  
29 30 31 32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
28  
TW3032P  
Figure 1. Back View of TW3008P, TW3016P, TW3032P  
Rack Ears: Allow mounting into an industry standard 19-inch wide equipment rack.  
Thumbscrews: Allow back panels to be removed.  
Panel with Connectors: The TW3008P and TW3016P have one blank panel.  
BNC Connectors: The TW3008P, TW3016P, and TW3032P have 8, 16, and 32 BNC connectors,  
respectively.  
Screw Terminal Connectors: The TW3008P, TW3016P, and TW3032P have 2, 4, and 8 screw  
terminal connectors, respectively. Each screw terminal connector allows for the connection of  
four UTP wire pairs.  
4
C1662M-A (1/06)  
 
Installation  
Make sure all parts are present for the units.  
TW3008P  
4
4
4
2
Rack mount screws, 10-32 x 0.750-inch, Phillips, pan head (U.S.)  
Rack mount screws, M6 x 1, 20 mm  
Washers  
Screw terminal connectors  
TW3016P  
4
4
4
4
Rack mount screws, 10-32 x 0.750-inch, Phillips, pan head (U.S.)  
Rack mount screws, M6 x 1, 20 mm  
Washers  
Screw terminal connectors  
TW3032P  
4
4
4
8
Rack mount screws, 10-32 x 0.750-inch, Phillips, pan head (U.S.)  
Rack mount screws, M6 x 1, 20 mm  
Washers  
Screw terminal connectors  
MOUNTING  
The TW3008P, TW3016P, and TW3032P transceivers are one rack unit (1 RU [1.75"]) high and are  
supplied with the necessary parts for mounting into an industry standard 19-inch (48.26 cm) wide  
equipment rack. The units can also be placed on a flat surface, such as a shelf.  
Figure 2. Rack Mounting  
C1662M-A (1/06)  
 
5
APPLICATIONS  
Figures 3 through 6 show how to use the transceivers in various applications. Always connect + to +  
and  
-
to -. The TW3032P is used as an example in Figures 3 through 6.  
Table A shows the distance in feet with Coaxitron or video only when using a particular type of Cat  
cable. Table B shows the maximum allowable wire gauge for single wire and stranded wire.  
Table A. Cable Distance  
Distance  
(with Coaxitron)  
Distance  
(video only)  
Cable Type  
Cat3  
Cat5  
Cat5e  
Cat6  
300 ft  
500 ft  
750 ft  
750 ft  
400 ft  
650 ft  
750 ft  
750 ft  
NOTE: Cat5e cable is recommended for optimum video performance.  
Table B. Wire Gauge  
Wire Gauge (maximum allowable)  
24 AWG (1.5 mm2)  
24 AWG (1.0 mm2)  
Single Wire (solid)  
Stranded Wire (flexible)  
+
+
-
FIXED CAMERA  
-
TW3032P  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
13  
29  
14  
30  
15  
31  
16  
32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
28  
MONITOR  
UTP  
TW3032P  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
13  
29  
14  
30  
15  
31  
16  
32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
28  
Figure 3. Connecting Two Transceivers  
6
C1662M-A (1/06)  
 
   
10 PINS (5-/6+)  
PIN 5 +  
PIN 4 -  
+
-
+
-
FIXED CAMERA  
8 PINS (4-/5+)  
MONITOR  
UTP  
VIDEO  
TW3032P  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
13  
29  
14  
30  
15  
31  
16  
32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
28  
Figure 4. Connecting a UTP Camera to a UTP Receiver  
NOTE: UTP cameras have a 10-pin RJ-45 connector. Standard RJ-45 connectors have 8 pins.  
+
+
-
BLUE WIRE =  
-
CAMCLOSURE  
GRAY WIRE =  
MONITOR  
UTP  
TW3032P  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
28  
13  
29  
14  
30  
15  
31  
16  
32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
Figure 5. UTP Camclosure® to UTP Receiver  
C1662M-A (1/06)  
 
7
VC-UTP BOARD  
+
+
-
SPECTRA®  
-
UTP  
COAXITRON  
TW3032P  
1
2
3
4
5
6
7
8
9
10  
26  
11  
27  
12  
28  
13  
29  
14  
30  
15  
31  
16  
32  
17  
18  
19  
20  
21  
22  
23  
24  
25  
VIDEO  
MONITOR  
Figure 6. Coaxitron PTZ Control  
8
C1662M-A (1/06)  
 
Service  
REPLACING A BACK PANEL  
You can easily replace a blank back panel or a back panel with connectors. Figure 7 shows the removal  
of a blank panel after the two thumbscrews are loosened. The panels with connectors can be removed  
the same way.  
Figure 7. Back Panel Replacement  
C1662M-A (1/06)  
 
9
 
Specifications  
ELECTRICAL  
Power Source  
No power required  
Wire Type  
Wire Category  
Unshielded twisted pair (24 AWG maximum)  
Cat3 or better  
Wire Impedance  
Wire Distance  
100 ohms 20%  
750 feet maximum  
DC Loop Resistance  
Differential Capacitance  
Transient Immunity  
Insertion Loss  
52 ohms per 1,000 feet  
19pF/ft max  
300 W peak pulse power (8/20 US)  
<1 dB 0-8 MHz frequency range  
VIDEO CHARACTERISTICS  
Video Input/Output  
Format  
1, BNC; internally terminated in 75 ohms  
NTSC, PAL, SECAM  
Frequency Response  
DC to 10 MHz  
Common Mode/Differential  
Mode Rejection  
>60 dB typical  
MECHANICAL  
Connectors  
BNC  
Screw Terminal  
Video input/output  
UTP input/output  
Construction  
Finish  
Aluminum  
Black  
GENERAL  
Operating Temperature  
Relative Humidity  
Data Transmission  
Dimensions  
-40° to 185°F (-40° to 85°C)  
0 to 90%, noncondensing  
Supports Coaxitron up to 750 feet  
7.00" D x 17.50" W x 1.75" H  
(17.78 x 44.45 x 4.44 cm)  
Unit Weight  
TW3008P  
TW3016P  
TW3032P  
2.94 lb (1.33 kg)  
3.10 lb (1.41 kg)  
4.42 lb (2.00 kg)  
This equipment contains electrical or electronic components that must be recycled properly to  
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste  
electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling  
this equipment.  
10  
C1662M-A (1/06)  
 
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of  
shipment.  
Exceptions to this warranty are as noted below:  
Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted pair transmission products.  
Three years on Spectra® IV products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and  
MC3651H-2X camera models, which have a five-year warranty.  
Three years on PMCL200/300/400 Series LCD monitors.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.  
Two years on Spectra III, Esprit®, ExSite, and PS20 scanners, including when used in continuous motion applications.  
Two years on Esprit and WW5700 Series window wiper (excluding wiper blades).  
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The lamp and color wheel will be covered for a period of  
90 days. The air filter is not covered under warranty.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and EnduraSeries distributed network-based video  
products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight  
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this  
warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelcos  
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products  
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state  
to state.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and  
provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization  
number (CA number if returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate  
address below.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco  
Pelco c/o Expeditors  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
REVISION HISTORY  
Manual #  
C1662M  
C1662M-A  
Date Comments  
12/05 Original version.  
1/06 Revised Table A.  
Pelco, the Pelco logo, Camclosure, Coaxitron, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
©Copyright 2006, Pelco.  
All rights reserved.  
DLP is a registered trademark of Texas Instruments, Inc.  
 
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Australia Canada Finland France Germany Italy Macau The Netherlands Russia Singapore  
|
|
|
|
|
|
|
|
|
South Africa Spain Sweden United Arab Emirates United Kingdom United States  
|
|
|
|
|
 

Pelco Digital Camera C10CH User Manual
Philips DVD Player DVD 691 User Manual
Philips Portable Stereo System AZ8352 User Manual
Philips Telephone Accessories H2526 User Manual
Philips Work Light E3 Series User Manual
Polaroid Digital Camera CIA 1237PC User Manual
Polycom Server 623128UK User Manual
Porter Cable Drill 619 User Manual
Poulan Lawn Mower PR22H48STA User Manual
ProForm Home Gym PFEX38440 User Manual