Pelco Home Security System PM105 User Manual

C210M-C (7/99)  
PM105  
Medium-Duty Wall Mount  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following warnings should be observed.  
300 W. Pontiac Way,  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Installation shall be done in accordance with all local and national electrical and mechanical  
codes utilizing only approved materials.  
International Customers:  
Tel (1-559) 292-1981  
FAX (1-559) 348-1120  
3. Use only installation methods and materials capable of supporting four times the maximum  
specified load.  
4. Use stainless steel hardware to fasten the mount to outdoor surfaces.  
5. To prevent damage from water leakage when installing a mount outdoors on a roof or wall,  
apply sealant around the bolt holes between the mount and mounting surface.  
U
®
L
LISTED  
The product and/or manual may bear the following marks:  
This symbol indicates that dangerous  
voltage constituting a risk of electric  
shock is present within this unit.  
C A U T I O N :  
RISK OF ELECTRIC SHOCK.  
This symbol indicates that there are  
important operating and maintenance  
DO NOT OPEN.  
instructions in the literature accompa-  
nying this unit.  
Please thoroughly familiarize yourself with the information in this manual prior to installation  
and operation.  
DESCRIPTION  
The PM105 is a medium-duty wall mount designed for mounting PS7, PS7-24 Scanners and  
PT270P, PT270-24P, PT280-24P, PT175-24P, and PT180-24P Pan/Tilts. The PM105 is capable  
of handling loads up to 40 pounds (18 kg).  
INSTALLATION  
When mounting the PM105 wall mount, make certain that the mounting surface is capable of  
supporting the full load of the mount, scanner or pan/tilt, and camera.  
NOTE: The two fasteners to  
secure the mount to the mount-  
ing surface (minimum 1/4-inch  
diameter is recommended) and  
the three fasteners (10-32 x  
1.00-inch) to secure the scanner  
to the mount are not supplied.  
1. Drill holes in the mounting surface using the mount as a template, and attach the mount  
securely with fasteners of suitable size.  
If you install the mount outdoors, rain water could leak through the holes for the mounting  
bolts and damage the wall. This could be a problem only if the mounting bolts go completely  
through the wall.  
To prevent water damage, seal the bolt holes with an appropriate sealant. Apply the sealant  
around the bolt holes between the mount and the mounting surface.  
2. Attach the scanner or pan/tilt to the mount.  
SPECIFICATIONS  
Positioning Adjustment:  
Pan/tilt Mounting:  
Fixed  
Secure with three 1/4-20 x 1.00-inch fasteners (supplied) (part #  
ZH1/420X1.00SS)  
Scanner Mounting:  
Secure with three 10-32 x 1.00-inch fasteners (not provided). (A  
hex socket head style bolt with a lock washer is recommended.)  
Maximum Load:  
Construction:  
Finish:  
Dimensions:  
Weight:  
40 lb (18 kg)  
Cast aluminum  
Gray polyester powder coat  
See Figure 1  
2.40 lb (1.09 kg)  
 

Peavey Stereo Amplifier CC 2800 User Manual
Philips Clock Radio AJ3540D User Manual
Philips CRT Television 14PT300 User Manual
Philips Flat Panel Television L01_15624 User Manual
Philips Projection Television 43PP7445 User Manual
Philips Washer SBD 4000 User Manual
PNY Computer Hardware VCGGTX7702XPB User Manual
Poulan Chainsaw 530165228 User Manual
Poulan Pole Saw 810 EP User Manual
Presonus Audio electronic Stereo Equalizer Smart Compressor User Manual