PMNP2B PMNP2S
Owners Manual
Rechargeable 10 Watt Mini iPod Speakers
Connecting
•
•
•
Connect a Mini USB plug into the input
jack on each speaker
Connect the stereo 3.5mm audio plug to
the headphone jack of any audio device
Slide the ON/OFF switch of each speaker
to the ON position. The blue LED will
illuminate.
•
Press Play on your audio device and
adjust its volume to the desired level.
Charging
•
Connect the larger USB plug into a
powered USB port on your computer.
The LED will turn Magenta while
charging, and back to blue when the
batteries are fully charged.
•
You can continue use of your
speakers while they charge.
These speakers are powered by a
rechargeable battery in each speaker.
When the blue light dims, or you
experience sound distortion, recharge
the batteries.
|