PYLE Audio Car Video System PLDVD178USB User Manual

PLDVD178USB  
OWNER'S MANUAL  
Mobile Video System  
BAND  
OSD  
POWER  
CLK  
MODE  
STOP  
PLAY/PAUSE  
MUTE  
SLOW  
SETUP  
LO/DX  
MO/ST  
TITLE/PBC  
A/P  
REPEAT  
ANGLE  
GOTO  
VOL+  
EQ  
SEL  
VOL-  
1
ENTER  
2
3
4
5
6
9
7
0
8
MENU  
SW  
+10  
DVD/VCD/CD/MP3 PLAYER WITH  
AM/FM-STEREO DIGITAL PLL TUNING RADIO  
WITH ANTI-THEFT FLIP DOWN DETACHABLE PANEL  
 
SAFETY INFORMATION  
CAUTION:  
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER  
USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS  
RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER  
CORRECTLY AS INSTRUCTED.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE.DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER  
SERVICINGTO QUALIFIED PERSONNEL.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE  
THIS EQUIPMENT TO RAIN OR MOISTURE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,AND ANNOYING  
INTERFERENCE,USE ONLY THE RECOMMENDED ACCESSORIES.  
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.  
This product incorporates copyright protection technology that is protected by method  
claims of certain U.S. patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
REGION MANAGEMENT INFORMATION:  
This DVD Player is designed and manufactured to respond to the Region Management  
Information that is recordedon a DVD disc. If the Region number described on the  
DVD disc does not correspond to the Region number of this DVD Player, this DVD  
Player cannot play this disc.  
2
 
DISC NOTES  
Disc formats supported by this player  
Label side up  
DVD  
12 cm disc  
(Single-sided disc only)  
Video CD  
12 cm disc  
CD  
Do not touch  
the underside  
of the disc  
12 cm disc  
MP3  
12 cm disc  
Discs which cannot be played with this  
player  
Do not bend  
• DVD-ROM  
• DVD-R/DVD-RAM  
• CDV  
• CD-G  
Wipe the disc from center  
toward the outside edge  
Handling and Cleaning  
• Dirt, dust, scratches and warping disc  
will cause misoperation.  
• Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
• Do not warp discs.  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a ball  
point pen or pencil as shown on the right.  
To remove the rough edges, press the  
side of the pen or pencil against the  
inside and outside edges of the disc.  
• A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
• Do not place discs in the following  
places:  
1. Direct sunlight  
2. Dirty, dusty and damp areas  
3. Near car heaters  
4. On the seats or dashboard  
Disc Cleaning  
Rough spots on  
outside edge  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Ball point pen  
or pencil  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
unusable) depending on your handle it  
and conditions in the usage environment.  
Note these scratches are not an  
indication of any problem with the player.  
Rough spots  
on inside edge  
3
 
INSTALLATION  
Notes:  
Choose the mounting location where the unit will not interfere with the normal  
driving function of the driver.  
Before finally installing the unit, connect the wiring temporarily and make sure it is  
all connected up properly and the unit and the system work properly.  
Use only the parts included with the unit to ensure proper installation. The use of  
unauthorized parts can cause malfunctions.  
Consult with your nearest dealer if installation requires the drilling of holes or other  
modifications of the vehicle.  
Install the unit where it does not get in the drivers way and cannot injure the  
passenger if there is a sudden stop, like an emergency stop.  
If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum  
performance.  
30˚  
Avoid installing the unit where it would be subject to high temperature, such as from  
direct sunlight, or from hot air, from the heater, or where it would be subject to dust,  
dirt or excessive vibration.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either from Front(conventional DIN Front-mount)  
or Rear(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the  
unit chassis). For details, refer to the following illustrated installation methods.  
4
 
INSTALLATION  
DASH BOARD  
METAL MOUNTING STRAP  
HEX NUT  
SPRING WASHER  
CONSOLE  
PLAIN WASHER  
SLIDE BRACKET HOUSING  
HEX BOLT  
TAPPING SCREW  
KEY PLATE  
PLASTIC TRIM OUT  
KEY PLATE  
1. WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST, AND MAKE THE  
DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE ON THE UNIT.  
2. THEN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE.  
3. PUSH IT TO INSTALL THE FRONT PANEL COMPLETELY.  
FRONT PANEL  
5
 
INSTALLATION  
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE CONNECTING THE  
WIRE.  
1. The unit is designed for negative terminal of the battery which is connected to the  
vehicle metal. Please confirm it before installation.  
2. If the car interior is extremely hot, as after being parked in the sun, do not use the  
player until the car has been driven for a while to cool off the interior.  
3.Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob  
to remove the right side first, then take away the front panel (see fig.2) and put it in  
the protective case (see fig.3) for safe keeping.  
4. Install the front panel back into its bracket and then push it back to the position for  
playing (see fig.4).  
FRONT PANEL  
GUIDE KNOB  
OPEN BUTTON  
( FIG.1)  
( FIG.2)  
PROTECTIVE CASE  
FRONT PANEL  
FRONT PANEL  
( FIG.3)  
( FIG.4)  
6
 
ELECTRIC CONNECTION  
WIRING CONNECTION  
MAIN UNIT  
USB  
AUX (optional)  
RCA CABLE  
VIDEO IN YELLOW  
RCH IN RED  
ANTENNA CONNECTOR  
LCH IN WHITE  
GREY SUB WOOFER  
VIDEO OUT 2 YELLOW  
COAXIAL OUT BROWN  
IGNITION  
SWITCH (B+)  
RED  
REAR RCA OUTPUT CABLE (OPTIONAL)  
RCH RED  
LCH WHITE  
FUSED  
FILTER  
BOX  
MEMORY YELLOW  
BACK-UP (B+)  
FRONT RCA OUTPUTCABLE  
FRONT RCA RED R  
BLACK  
VIDEO OUT 1 YELLOW  
FRONT RCA WHITE L  
GROUND (B-)  
(FOR RCA LINE OUT VERSION ONLY)  
FUSE  
POWUTEOR  
BLUE  
ANTENNA  
WHITE  
GREY  
FRONT  
FRONT  
Lch SPK.  
Rch SPK.  
WHITE/BLACK  
GREY/BLACK  
GREEN  
VIOLET  
REAR  
REAR  
Lch SPK.  
Rch SPK.  
GREEN/BLACK  
VIOLET/BLACK  
NOTE:  
The accessory USB clip of this unit as below. On side clip the USB cable, the other  
side clip the proper place to fixed the USB cable.  
7
 
REMOTE CONTROL  
14  
1
BAND  
OSD  
POWER  
CLK  
MODE  
2
15  
17  
STOP  
PLAY/PAUSE  
MUTE  
SLOW  
16  
18  
20  
3
4
5
SETUP  
LO/DX  
MO/ST  
TITLE/PBC  
A/P  
6
19  
21  
REPEAT  
ANGLE  
7
GOTO  
VOL+  
EQ  
8
9
22  
SEL  
VOL-  
1
ENTER  
10  
23  
11  
12  
2
3
4
24  
5
6
9
7
0
8
MENU  
SW  
+10  
13  
25  
1. CLK  
Press it to change the display to clock display.  
Press it to change between radio or disc mode.  
Press it to stop playback.  
2. MODE  
3. STOP  
4. SETUP  
5. MO/ST  
(AUDIO)  
Display the SETUP menu.  
Press it to select STEREO or MONO (In disc stations, press it to  
changing of the AUDIO soundtrack on multi-audio soundtrack DVD  
disc. Changing of the sound mode of the VCD/CD disc)  
Changing of the SUBTITLE language on multi-subtitle language  
6. LO/DX  
(SUBTITLE) DVD disc. In radio mode, press this button for distance reception  
when you are located at weak signal location, depress it for stronger  
signal.  
7. REPEAT  
8. GOTO  
9.  
10. SEL  
Switch the Repeat mode of DVD/VCD/CD disc.  
Disc search button, cooperatively used with numeric buttons  
/
Press  
to skip to the next track & press  
to skip back one track.  
Press it to change audio mode through Volume, Bass, Treble, Balance  
and Fader modes.  
11. VOL+/VOL- Press it to adjust volume level.  
12. / / /  
13. MENU/  
Cursor buttons in MENU mode.  
Press it to display the root menu of the DVD disc./ Press and hold for  
SUBWOOFER more than 2 seconds can have subwoofer.  
14. BAND(OSD) Display statistical disc information during playback (To change the  
band in radio stations)  
15. POWER  
Press it to turn on the unit, press it again to turn off.  
16. PLAY/PAUSE Press once to pause a play, press again to resume playback.  
17. MUTE Press it to mute down sound.  
18. TITLE/PBC Display the TITLE menu that is stored in DVD disc changing  
(A/P)  
between PBC ON and PBC OFF on the VCD disc. (Auto store and  
preset scan function in radio stations.)  
Changing for slow forward/reverse playback motion.  
Changing of the view angle on multi-angle DVD disc  
Press it to turn to equalization function.  
19. SLOW  
20. ANGLE  
21. EQ  
22.  
/
Press  
to start forward rapidly & to reverse rapidly.  
23. ENTER  
Confirm the Track/Chapter selected with the number key or selected  
with the cursor buttons on TV screen.  
Numeric buttons  
24. 0 - 9  
25. +10  
Press it to select 10th digits  
8
 
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1. Open the battery compartment cover.  
2. Insert the new batteries. Make sure that the positive and negative terminals of the  
batteries are oriented indicated.  
3. Close the cover  
Using the Remote Control  
Face the remote control towards the player front face IR mark (remote control signal  
receiver).  
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.  
To prevent damage to the unit, be sure to follow the connection diagram (page 7).  
9
 
BASIC OPERATION  
16  
1
3
2
5 15  
14  
18 17 22  
12  
4
6
7
8
9
10  
11 13  
19  
20 21  
¤
÷
1. OPEN BUTTON  
Press it to flip down the front panel. Then you can insert the CD disc into the CD  
compartment. And you can find the OPEN button. Press it to eject the disc.  
2-3. VOL +/ VOL - & SEL BUTTON  
Press it to change audio mode through volume, bass, treble, balance, and fader  
modes. Rotate VOL +/ VOL- knob to adjust the selected mode. When mode has  
not been adjusted for several seconds, display returns to normal radio or CD display.  
VOL  
BAS  
TRE  
BAL  
FAD  
A. Volume: Adjust volume level by rotating VOL +/ VOL- knob.  
Note:The unit is initially set to volume mode.  
B. Bass: Press SEL button one time. Adjust bass level by rotating VOL +/ VOL-  
knob.  
C. Treble: Press SEL button two times. Adjust treble level by rotating VOL +/ VOL-  
knob.  
D. Balance: Press SEL button three times. Adjust sound balance between left and  
right speakers by rotating VOL +/ VOL- knob.  
E. Fader: Press SEL button four times. Adjust sound balance between front and  
rear speakers by rotating VOL +/ VOL- knob.  
10  
 
BASIC OPERATION  
4. BAND BUTTON  
In RADIO mode, press the BAND button on the front panel or on the remote controller  
to select your desired radio band and word which band is selected will be displayed  
on LCD. Press it to change the bands as below:  
FM  
MW  
LW  
FM  
MW  
FM  
AM  
For 3 Bands (Europe)  
5. EQ BUTTON  
For 2 Bands (Europe)  
For 2 Bands (USA)  
Press it to turn to equalization function and to select desired audio mode. There  
are four kinds of mode as below:  
JAZZ  
CLAS  
POP  
ROCK  
6-7-8-9-10-11. PRESET STATION  
A. To memorize the current frequency, press any one of the six preset buttons[1-  
6] on the front panel or on the remote controller hold for more than 2 seconds.  
B. To recall the preset memory, press one of the preset buttons [1-6].  
C. Press 1/TOP button to select the first track/ chapter to play.  
a. In the state of VCD/CD/MP3 disc playing, press the button on the front panel  
to select the first track / chapter to play. (depending on the disc used for VCD)  
b. In the state of DVD disc playing, the 1/TOP button is not available.  
D. Press 2/RPT button to select repeat mode as follow:  
DVD:  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REPEAT OFF  
VCD/CD:  
REP-ONE  
REP-ALL  
a. Continuously repeat at the current chapter/track, when selected REP-ONE  
mode.  
b. Select REP-ALL mode to continuously repeat all chapter/track on the current  
disc.  
c. REPEAT feature does not support VCD2.0 (with PBC ON).  
E. Press 3/INT button to scan disc.  
a. In the state of VCD/CD disc playing, press the 3/INT button on the front panel  
to play the previous 10 seconds part of each track/chapter on disc. (depend  
on the disc used for VCD)  
b. In the state of DVD/MP3 disc playing, the 3/INT button is not available.  
F. Press 4/RDM to play disc in random.  
a. In the state of VCD/CD/MP3 disc playing, press the 4/RDM button on the  
front panel to play in random or select DISC REP. (depend on the disc used  
for VCD)  
b. In the state of DVD disc playing, the 4/RDM button is not available.  
11  
 
BASIC OPERATION  
12. AS/PS BUTTON  
When shortly pressing the APS button on the front panel or the A/P button on the  
remote controller, the radio searches for each preset station. When the field  
strength level is more than the threshold level of stop level, the radio is holding at  
that preset number for few seconds with releasing mute, and then searches again.  
In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing  
the APS or A/P button (more than 1 second), the radio searches from the current  
frequency and checks the signal strength level until 1 cycle search is finished.  
And then 6 strongest stations are preset to the corresponding preset number.  
The AS operation is implemented in the each band of selected band. When the  
AS operation is finished, the radio executes the preset scan.  
13. MU BUTTON  
Press it to mute down sound. Press it again to release this mode and recover  
previous volume level.  
14.CLK BUTTON  
Press it to change the display to clock display. Press it again to return to previous  
display. In clock display, press and hold for about 2 seconds until the hour display  
flashes. Rotate VOL +/- button to adjust hours, press CLK button to flash mintue  
then rotate VOL +/- button to adjust minutes.  
15. PWR BUTTON  
Press it to turn on the unit. Press it again to turn off.  
16.  
17.  
BUTTON  
Pressing during playback will stop play temporary. Return to normal playback,  
once again.  
press  
/
BUTTON  
A. When long pressing the  
/
button (more than 2 seconds) during play, the  
speed of rapid forward/reverse changes according to the disc as follow.  
DVD/VCD/CD/MP3:  
Normal Playback  
2X  
4X  
6X  
8X  
B. Shortly press the  
one track.  
/
button during playback to skip to next track or back  
Note: For some VCD2.0 discs (PBC-playback control),  
be unavailable.  
and  
buttons may  
C. Press UP or DN button on the remote controller or  
/
on the front panel to  
manually tune up or down for your desired station. Press them hold for more  
than 2 seconds to automatically tune up or down for the stronger station.  
12  
 
BASIC OPERATION  
18. MOD BUTTON  
Press it repeatedlyselectDISC,AUXIN,RADIOmode.InUSB playing , you can  
press the stop button to stop playing , then press GOTO button to display the DVD  
dire and USB dev on the screen, press UP/DN button to select the DVD dire to select  
the DVD mode , then playing the DVD disc.  
19. EJECT BUTTON  
In CDP playing, press the eject button to eject the disc form the disc slot. If in USB  
playing , you must change the mode to the DVD mode to eject the disc, otherwise,  
you cannot eject the disc from the disc slot.  
20. FLASHING LED  
If the front panel is not on the main unit, LED will be flashing.  
21. RESETBUTTON
RESETbuttonisplacedonthe housing and must be activated with either a ballpoint  
penorthinmetal object. TheRESETbuttonistobeactivatedforthefollowing
reasons:
-Initial installation of the unit when all wiring is completed.  
-All the function buttons do not operate.  
-Error symbol on the display.  
Note: If press RESET button, the unit cant work yet, please use a cotton swab  
soaked in isopropyl alcohol to clean the socket on the back of the front panel.  
22. ST BUTTON  
Press ST button to select stereo or mono reception for radio stations.  
MP3 DISC PLAY  
1. MP3 disc is playing as the format of FOLDER by FOLDER.  
For example:  
MP3 PLAYER  
ROOT  
ROOT  
MP3 MUSIC  
SKY  
0
1
MP3 HEAR YOUR  
Use///toselecttheitemorfolder,thenpressENTERbutton.
PressingREPEAT button repeatedly can select three kinds of repeat play mode.  
2. REP-ONE:
Playthesamesongover and overagain.
3. FOLDERREPEAT:
Playallsongsinthe currentdirectoryinsequence,over andover again.
4. DISCREPEAT:
Play all songs in the disc over and over again.  
In the playback, use  
When long pressing the  
or  
to skip an item ahead or back.  
to fast rapid forward/reverse.  
/
Note: The FOLDER cannot be selected during playing. It can be selected after  
(Stop) button pressed.  
13  
 
BASIC OPERATION  
c.PressOSDDfor thethirdtime:
OUSBocpeerationac
A.ConnecttheUSBappliancetothe
CHAPTER ELAPSED  
USB port of the unit properly, when  
00:20:15  
the USB appliance connect to the  
unit, the system starts playing track  
of the USB appliance automatically.  
d. Press OSD for the fourth time:  
B. Press the  
/
button to skip to  
CHAPTER REMAIN  
the next track or skip to the back one  
00:10:25  
track. Press the  
/
button to fast  
forward or fast reverse.  
e. Press OSD for the fifth time:  
C. In USB playing, you can press the  
cursor button to select the item.  
The message on the screen will be  
cleared.  
Then press ENTER button to play.  
B. Example for VCD/SVCD/CD:  
Also press numeric button to play the  
corresponding track directly. Press  
a. Press OSD for the first time:  
the repeat button to select repeat  
play mode.  
SINGLE ELAPSED  
D. In USB mode, you cannot take out of  
00:00:25  
the disc from the disc compartment.  
You press the stop button then press  
theGOTObuttonandbutton to  
/
b. Press OSD for the second time:  
select the mode between DISC and  
USB. You can press the eject button  
SINGLE REMAIN  
00:04:25  
to eject the disc while selected DISC  
MODE.  
c. Press OSD for the third time:  
On-Screen Display Function  
Press the OSD button during playback  
TOTAL ELAPSED  
00:10:25  
to display the contents of the current  
disc on the screen.  
d. Press OSD for the fourth time:  
A. Example for DVD:  
a. Press OSD for the first time:  
TOTAL REMAIN  
00:55:25  
TITLE 01/03 CHAPTER 002/025  
e. Press OSD for the fifth time:  
The message on the screen will be  
cleared for SVCD and VCD.  
00:11:25  
Title Number, Total Title Number,  
Chapter Number, Total Chapter  
Number of this Title of the disc  
C. Example for MP3:  
Each time OSD is pressed, the  
message displayed on screen  
changesas follows:  
currently being played willbe shown  
onthescreen,along with the elapsed  
time.  
CHAPTER ELAPSED  
OFF  
CHAPTER REMAIN  
b. Press OSD for the second time:  
TITLE REMAIN  
01:20:25  
14  
 
BASIC OPERATION  
Multi-angle Function (For DVD only)  
Press ANGLE during playback. Each time  
the button is pressed, number of the angle  
changes in sequential order.  
Notes: The angle number is different  
according to the disc.The function only  
work for discs having scenes recorded at  
different angles. When no different angle  
are recorded, will be displayed at screen  
left top corner.  
Multi-audio Language Function  
A. DVD: Press AUDIO during playback.  
Each time the button is pressed,  
number of the audio soundtrack  
language changes on sequential order.  
Notes: The language number is  
different according to the disc. Some  
disc only contain one language  
soundtrack. When no different  
language soundtrack are recorded,  
will be displayed at screen left top  
corner.  
B. VCD/CD: Press AUDIO during  
playback. It is possible to switch the  
sound between monaural and stereo  
sMoOuNnOd.LEFT  
MONO RIGHT STEREO  
TITLE Menu Function  
A. DVD: If the DVD has multiple titles  
recorded on the disc. It can select  
preferred title from the title menu to  
start playback.  
a.Press TITLE during playback. The  
title menu is display.  
b.Press the cursor button shown in TV  
screen, select preferred title by the  
cursor button and confirmed by  
ENTER key.  
B. VCD: Press MENU button while  
the disc is playing, you can switch  
between "PBC on"and "PBC off" mode.  
Multi-subtitle Language Function  
(For DVD only)  
Press SUBTITLE during playback. Each  
time the button is pressed, number of the  
subtitle language changes in sequential  
order.  
Notes: The language number is different  
according to the disc. Some discs only  
contain one subtitle language. When no  
different subtitle language are recorded,  
will be displayed at screen left top  
corner.  
15  
 
SETUP  
INITIAL SETUP  
GENERAL SETUP  
--- MAIN PAGE---  
--- GENERAL PAGE ---  
GENERAL SETUP  
SPEAKER SETUP  
AUDIO SETUP  
TV DISPLAY  
PIC MODE  
NORMAL/PS  
NORMAL/LB  
WIDE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
PREFERENCES  
EXIT SETUP  
1. Press SETUP in the stop mode.  
(Press the stop button twice to ensure  
the player under STOP mode.)  
MAIN PAGE  
TV Screen  
2. The initial SETUP menu is displayed.  
3. Select the preferred item by using the  
4:3  
Wide (16:9)  
Video Material  
Normal  
Pan Scan  
Letter-box  
4:3  
/
buttons.  
16:9  
4. Press ENTER buttons.  
A. GENERAL SETUP  
This setup page includes all the  
item of TV display & audio output  
feature. The detail please refer to  
GENERAL SETUP MENU.  
1. TV DISPLAY SETUP  
This is to select the appropriate TV  
aspect (4:3 or 16:9) according to the  
connected TV set.  
B. SPEAKER SETUP  
Normal/PS (For 4:3 TV)  
This is to activate the audio output  
from DOLBY AC3 5.1 DOWNMIX  
to 2 channel mode. Please refer to  
SPEAKER SETUP MENU.  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the  
left and right edges are cut off.)  
Normal/LB (For 4:3 TV)  
C. AUDIO SETUP  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of  
the screen.)  
This setup page includes all the  
items for AUDIO. Please refer to  
AUDIO SETUP MENU.  
D. PREFERENCE SETUP  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
This setup page includes all the  
configuration of support feature.  
The detail please refer to  
PREFERENCES SETUP MENU.  
16  
 
SETUP  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
TV DISPLAY  
PIC MODE  
AUTO  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
HI-RES  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
N-FLICKER  
ENGLISH  
FRENCH  
GERMAN  
ITALIAN  
SPANISH  
MAIN PAGE  
MAIN PAGE  
2. PIC MODE SETUP  
4. OSD LANG TYPE SETUP  
Select AUTO, the player PIC mode will  
depend on DVD disc.  
Select the preferred OSD language by  
using the  
/
buttons.  
Select HI-RES format for best image  
resolution.  
Select N-FLICKER format on format  
on image or picture under noise affect.  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
TV DISPLAY  
PIC MODE  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
ON  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
OFF  
ON  
SCR SAVER  
OFF  
MAIN PAGE  
MAIN PAGE  
3. ANGLE MARK DISPLAY SETUP  
5. CAPTIONS SETUP  
If it is set to ON, when the multi-angle  
Activate the CAPTIONS feature by  
selecting ON. And release this feature  
by selecting OFF.  
DVD disc is playing,  
(the angle  
mark) will appear on the screen; if it  
is set to OFF, the mark will not appear.  
17  
 
SETUP  
--- GENERAL PAGE ---  
AUDIO SETUP  
--- AUDIO SETUP ---  
TV DISPLAY  
PIC MODE  
AUDIO OUT  
OP MODE  
ANALOG  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
SPDIF/RAW  
SPDIF/PCM  
DYNAMIC  
LPCM OUTPUT  
ON  
OFF  
MAIN PAGE  
6. SCR SAVER SETUP  
Select the SCR SAVER output ON/OFF.  
MAIN PAGE  
1. AUDIO OUT  
SPEAKER SETUP  
This is to activate the audio output  
from ANALOG mode to SPDIF/RAW  
mode to SPDIF/PCM mode.  
--- SPEAKER SETUP PAGE ---  
DOWNMIX  
LT/RT  
--- AUDIO SETUP ---  
AUDIO OUT  
STEREO  
MAIN PAGE  
OP MODE  
LINE OUT  
DYNAMIC  
RF REMOD  
LPCM OUTPUT  
This is to activate the audio output from  
DOLBY AC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
- Select the LT/RT to activate the Dolby  
surround compatible output.  
MAIN PAGE  
2. OP MODE  
There are two operating modes for the  
Dolby Digital decoder: LINE OUT and  
RF REMOD.  
- Select the STEREO to activate simple  
stereo mode.  
18  
 
SETUP  
--- AUDIO SETUP ---  
PREFERENCES SETUP  
--- PREFERENCES PAGE ---  
AUDIO OUT  
TV TYPE  
AUTO  
NTSC  
PAL  
FULL  
6/8  
OP MODE  
AUDIO  
DYNAMIC  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
4/8  
LPCM OUTPUT  
2/8  
OFF  
MAIN PAGE  
1. TV TYPE SETUP  
3.DYNAMIC RANGE CONTROL  
Select DRC and adjust the dynamic  
range of a Dobly Digital encoded  
program. There are 8 steps between  
full compression and off compression.  
This player can play discs recorded in  
either PAL or NTSC format.  
Select NTSC format, when you  
connected to NTSC TV.  
Select PAL format, when you  
connected to PAL TV.  
--- AUDIO SETUP ---  
Select AUTO format, the player TV  
output format will according to the  
DVD disc format.  
AUDIO OUT  
OP MODE  
DYNAMIC  
--- PREFERENCES PAGE ---  
TV TYPE  
LPCM OUTPUT  
LPCM 48K  
LPCM 96K  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
MAIN PAGE  
4.LPCM OUTPUT  
Select the LPCM OUTPUT between  
LPCM 48K and LPCM 96K.  
2. AUDIO LANGUAGE SETUP  
Select the preferred AUDIO sound-  
track by using the cursor buttons.  
19  
 
SETUP  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
TV TYPE  
1 G  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
AUDIO  
2
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
3 PG  
4 PG 13  
5
6 PG-R  
7 NC-17  
8 ADULT  
NO_PARENTAL  
OFF  
3. SUBTITLE LANGUAGE SETUP  
Select the preferred SUBTITLE  
5. PARENTAL  
Select suitable parental guidance by  
the cursor buttons and confirmed by  
pressing ENTER button.  
language by using the cursor buttons.  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
AUDIO  
TV TYPE  
AUDIO  
SUBTITLE  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
SUBTITLE  
DISC MENU  
PARENTAL  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
CHANGE  
4. DISC MENU LANGUAGE SETUP  
Select the preferred DISC MENU  
language by using the cursor buttons.  
6. PASSWORD  
Select the change and press ENTER  
button. Type the old password (The  
initial factory code is 3308) and key  
in 4 characters password now you  
want to use, and retype again to  
confirm key in correctly.  
20  
 
SETUP  
--- PREFERENCES PAGE ---  
DEFAULTS TABLE  
TV TYPE  
General Setup TV Display  
PIC Mode  
Normal/PS  
AUTO  
AUDIO  
Angle Mark ON  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
OSD Language English  
Captions  
ON  
SCR Saver ON  
Speaker Setup Downmix  
Stereo  
Audio Setup Audio Out  
OP Mode  
Analog  
Line Out  
RESET  
Dynamic  
LPCM Out  
LPCM 96K  
AUTO  
Preferences TV Type  
Audio  
7. DEFAULTS  
English  
English  
Select reset to become factory initial  
setting.  
Subtitle  
DISC Menu English  
Parental  
NO PARENTAL  
3308  
--- PREFERENCES PAGE ---  
Password  
Smart Nav  
With Menu  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
NO MENU  
WITH MENU  
8. SMART NAV  
In this item, you can select NO MENU  
mode or WITH MENU mode.  
21  
 
SPECIFICATIONS  
Supply voltage  
Current consumption  
Signal system  
:
:
:
:
12V DC (11V-15V)  
Less than 10A  
Compositive video 1.0Vp-p 75Ω  
(1) DVD-VIDEO disc  
Discs played  
5(12 cm) single-sided, single-layer  
5(12 cm) single-sided, double-layer  
(2) Compact disc (CD-DA,VIEDO CD)  
5(12 cm) disc  
Audio Signal Output  
Characteristics  
:
:
2ch & 4ch line out  
(1) Frequency Response:  
(2) S/N Ratio:  
20 Hz-20 kHz  
90 dB (JIS)  
(3) Wow and Flutter:  
Below measurable limits  
For 3 Bands  
(Europe)  
FM  
For 2 Bands  
For 2 Bands  
(U.S.A.)  
FM  
(Europe)  
FM  
Frequency Coverage  
IF  
: 87.5 to 108 MHz 87.5 to 108 MHz 87.5 to 107.9 MHz  
: 10.7 MHz  
Sensitivity (S/N = 30 dB) : 15 dBu  
10.7 MHz  
15 dBu  
10.7 MHz  
15 dBu  
MW  
MW  
AM  
Frequency Coverage  
IF  
: 522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz  
: 450 KHz  
Sensitivity (S/N = 20 dB) : 40 dBu  
450 KHz  
40 dBu  
450 KHz  
40 dBu  
LW  
Frequency Coverage  
IF  
: 144 to 290 KHz  
: 450 KHz  
Sensitivity (S/N = 20 dB) : 45 dBu  
Note:  
Specifications and design are subject to modification, without notice, due to improvements  
in technology.  
22  
 
TROUBLE SHOOTING  
Before going through the check list, check wiring connection. If any of the problems  
persist after check list has been made, consult your nearest service dealer.  
Symptom  
No power.  
Cause  
Solution  
The car ignition switch is  
not on.  
If the power supply is properly  
connected to the car accessory  
terminal, switch the ignition key  
to ACC.  
The fuse is blown.  
Replace the fuse.  
Disc cannot be Presence of disc inside the  
Remove the disc in the player,  
Then put a new one  
loaded or  
ejected.  
player  
Inserting the disc in reverse  
direction.  
Insert the compact disc with  
the label facing upward.  
The disc is extremely dirty or  
defective  
Clean the disc or try to play a  
new one.  
Temperature inside the car  
is too high.  
Cool off or until the ambient  
temperature return to normal.  
Condensation.  
Leave the player off for an hour  
then try again.  
No sound.  
Volume is in minimum.  
Adjust volume to a desired level.  
Check wiring connection.  
Wiring is not properly  
connected.  
Sound skips.  
The installation angle is  
more than 30 degrees.  
Adjust the installation angle less  
than 30 degrees.  
The disc is extremely dirty  
or defective disc.  
Clean the compact disc, then  
try to play a new one.  
The operation  
keys do not  
work.  
The built-in microcomputer  
is not operating properly  
due to noise.  
Press the RESET button.  
Front panel is not properly  
fixed into its place.  
The radio does The antenna cable is not  
Insert the antenna cable firmly.  
notwork.  
connected.  
The signals are too weak.  
Select a station manually.  
This product incorporates copyright protection technology that is protected by method  
claims of certain U.S. patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners.Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
88-V3470-01  
23  
 

Pentair Water Pump 4 100 User Manual
Philips Computer Drive PCRW404K 17 User Manual
Philips Computer Monitor 107C6 User Manual
Philips DVD Player DVD726v2 User Manual
Philips DVD VCR Combo DVP3055V 01 User Manual
Philips Projector PT AE300U User Manual
Powermate Portable Generator PM0435253 User Manual
Precision Power Car Stereo System PC265C User Manual
ProForm Elliptical Trainer pfel559117 User Manual
PVI Industries Water Heater Tank Series User Manual