Professional Sound Corporation
DV Audio SGM1 Microphone Kit
The PSC SGM1 Microphone Kit Contains:
• SGM1 Microphone
• Foam Windscreen
• Koala tm MiniMax High Wind Fur Cover
• Special SGM1 Shockmount
• Offset, Highrise Camera Shoe Adapter
• Boom Pole Adapter
Instructions for using the Shock Mount:
1.
The SGM1 Microphone must be properly threaded through the silicone bands.
Please see photo for proper band placement around the microphone:
Note how SGM1 Microphone is threaded through the silicone bands
2.
3.
Install the foam windscreen for all outdoor use and for indoor use where air-
conditioning rumble may be a problem.
Install the Koala MiniMax tm High Wind Fur Cover when working outdoors in high
wind conditions. To install the Koala MiniMax Cover, carefully pull it over the
foam windscreen. Secure with the attached Velcro straps.
4.
To change from one adapter to another simply remove the thumbscrew located
on the base of the shock mount and replace the adapter with the other style. Be
sure to include the rubber washer between the shock mount body and the
adapter. This same thumbscrew can be used to tilt the microphone up or down
on it’s axis. Simply loosen the thumbscrew and reposition the microphone to
your desired position and then re-tighten the thumbscrew.
SPECIFICATIONS:
Size:
0.750” x 7.9”
(19mm x 200mm)
Supply Current:
Pick-up Pattern:
Freq. Response:
Output Impedance:
Max SPL:
<3mA
Weight:
2.7oz
(76.7gm)
Hyper-Cardioid
50 to 18Khz
50 Ohms
Case Material: Brass
Finish:
Power:
Black Matte Paint
48PH to Din Specs
115dB
Capsule Type:(2x) 12mm Electrete
Warranty:
1 year, Limited
Limited Warranty
Professional Sound Corporation warrants the DV SGM1 Microphone to be free of defective
material and workmanship for a period of one year from the original date of purchase and
agrees to repair or replace such defective parts or the whole product at it’s option,
provided that the equipment is returned to Professional Sound Corporation. Shipping and
insurance costs to and from Professional Sound Corporation must be prepaid by the
owner. This warranty does not cover damage due to accident, careless handling, abuse or
misuse, improper connection and/or installation, improper electrical contact or grounding.
This warranty will be null and void in the event of removal, alteration or tampering with the
product case seal, or by service or repair work not performed by Professional Sound
Corporation. Proof of purchase date (copy of invoice or Warranty Certificate) must be
furnished before warranty service will be performed. This warranty is in lieu of any other
warranty, expressed or implied, including warranties without limitation, products being
merchantable at the time of purchase or suitable for a particular purpose. This warranty
does not extend to, or include consequential damage.
In order to validate this warranty, the attached Professional Sound Corporation Warranty
Card must be filled out completely and mailed to the printed address within 14 days form
the date of delivery.
Professional Sound Corporation
28085 Smyth Drive
Valencia, Ca 91355 USA
Ph 661-295-9395
Fax 661-295-8398
Email: [email protected]
CE
DECLARATION OF CONFORMITY
EMC:
LVD:
This product is in compliance with the
Electromagnetic Compatibility Directive, 89/336/EEC
as defined in EN 50081-1, EN55022 and EN 50082-1.
IEC801-2, IEC801-3 and IEC801-4.
This product is in compliance with the requirements of
the Low Voltage Directive, 73/23/EEC. 93/68/EEC as
defined in EN60065, 1993 and/or EN60950/A1/A2/A3:
1995
TRADE NAME:
MODEL:
PSC, DV AUDIO
DV SGM1 Microphone
RESPONSIBLE PARTY:
Professional Sound Corp.
28085 Smyth Drive
Valencia, CA 91355 USA
CONTACT PERSON:
Ronald Meyer
(661) 295-9395
TYPE OF PRODUCT:
MANUFACTURER:
Microphone
Professional Sound Corp.
28085 Smyth Drive
Valencia, CA 91355 USA
We hereby declare that the equipment bearing the trade name and model number
listed above has been tested in accordance with the requirements contained in the
above listed directives. All necessary steps have been taken and are in force to
assure that production units manufactured will conform to Directive guidelines.
August 2005
Professional Sound Corporation.
|