LIMITED WARRANTY
The Manufacturer warrants to the original consumer purchaser that this product as
manufactured is free from defects in materials and workmanship. For a period of
two (2) years from date of purchase by the original consumer purchaser, we will re-
pair or replace, at our option, without charge for parts or labor incurred in replacing
parts, any part which we find to be defective due to materials or workmanship. This
Warranty is subject to the following limitations and exclusions.
1. This warranty does not apply to the engine. Please contact your nearest dealer
where they will send the machine to the engine manufacturer.
2. Transportation charges for the movement of any power equipment unit or at-
tachment are the responsibility of the purchaser. Transportation charges for
any parts submitted for replacement under this warranty must be paid by the
purchaser unless such return is requested by your dealer.
3. Battery Warranty: On products equipped with a Battery, we will replace, without
charge to you, any battery which we find to be defective in manufacture, during
the first ninety (90) days of ownership. After ninety (90) days, we will exchange
the Battery, charging you 1/12 of the price of a new Battery for each full month
from the date of the original sale. Battery must be maintained in accordance with
the instructions furnished.
4. The Warranty period for any products used for rental or commercial purposes is
limited to 90 days from the date of original purchase.
5. This Warranty applies only to products which have been properly assembled,
adjusted, operated, and maintained in accordance with the instructions fur-
nished. This Warranty does not apply to any product which has been subjected
to alteration, misuse, abuse, improper assembly or installation, delivery damage,
or to normal wear of the product.
6. Exclusions: Excluded from this Warranty are belts, blades, blade adapters, nor-
mal wear, normal adjustments, standard hardware and normal maintenance.
7. In case of any problem within the boundaries of this warranty, contact the near-
est department store, indicate the model number, serial number and the date of
purchase of your machine. This warranty does not apply to accidental dam-
ages. All implicit warranties are limited to the same time frames. Or contact:
REPAIR PARTS MANUAL
MODEL NO. M6556SMD
MFG. ID. NO. 96121001002
Rotary Lawn Mower
E.M. Services
54 Rue Lambrechts
92400 Courbevoie
France
Telephone: (1) 46678078
Fax: (1) 46678095
THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL
DAMAGES. ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME
PERIODS STATED HEREIN.
409888 12.05.06 BY
Printed in U.S.A.
ROTARY LAWN MOWER - - MODEL NUMBER M6556SMD (MFG. ID. NUMBER 96121001002)
KEY PART
KEY PART
NO. NO.
NO.
NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
8
9
532 40 32-98
532 18 35-67
532 75 06-34
532 12 51-62
532 06 64-26
532 19 19-38
532 19 84-64
532 19 58-00
Upper Handle
Engine Zone Control Cable
Screw
Bracket, Upstop
Wire Tie
Handle Knob
40 532 40 33-81
41 532 15 04-06
42 532 15 21-24
43 873 80 04-00
44 532 41 00-12
45 532 14 72-86
46 532 18 91-79
47 532 19 93-79
48 532 85 10-74
49 532 85 02-63
50 532 85 10-84
52 532 18 21-66
54 532 08 83-48
55 532 19 09-39
56 532 08 58-25
57 532 05 17-93
58 532 15 50-44
59 532 19 15-74
60 874 76 06-12
61 532 75 15-92
62 532 40 58-43
63 532 19 23-25
Support Bracket, RH
Screw, Hex Head, Threaded, Rolled 3/8-16 x 1-1/8
Spring, Torsion
Locknut, Hex
Lawn Mower Housing (Includes Key Number 46)
Rod, Hinge
Blade Adapter / Pulley
Blade, 22"
Washer, Hardened
Washer, Lock, Helical
Screw, Hex Head 3/8-24 x 1-3/8 (Grade 8)
Decal, Danger
Washer, Flat 1/2
Mounting Bracket, Debris Shield
Screw
Hairpin Cotter
Lower Handle
Handle Bolt
Bolt
Locknut, Hex
Debris Shield
Control Bar
Support Bracket, Handle, LH
Handle Bracket Assembly, RH
Support Bracket, Handle, RH
Handle Bracket Assembly, LH
Screw, Thread Cutting 5/16-18 x 3/4
Screw
Support Rod
Locknut, Keps
Rope Guide
Footguard
10 532 17 09-75
11 532 19 57-99
12 532 17 09-77
14 532 14 97-41
16 532 05 45-83
17 532 17 71-41
18 532 13 20-04
19 532 19 47-88
20 532 15 41-47
24 532 06 91-80
25 532 14 52-12
27 532 40 29-35
28 532 14 27-48
29 532 40 16-30
30 532 40 65-82
31 532 08 78-77
32 532 40 64-28
33 532 15 18-89
34 532 40 16-29
35 532 41 08-07
36 532 15 41-32
38 532 17 65-09
39 532 40 33-82
Nut, Hex
Locknut, Hex 3/18-16
Wheel & Tire Assembly
Shoulder Bolt
Belleville Washer
Axle Arm Assembly
Knob, Selector
Spring, Selector
Mulcher Door
Spacer
Bracket, Wheel Adjuster
Bracket, Housing
Deflector, Discharge
Support Bracket, LH
Screw
64
- - -
Engine, Briggs & Stratton, Model Number 124K02
(Order Parts from Engine Manufacturer)
O-Ring
67 532 19 74-80
72 532 19 79-91
- - 532 18 21-34
- - 532 40 04-53
- - 532 40 04-54
- - 532 40 04-56
- - 532 40 04-55
- - 532 40 98-88
Clip, Cable
Warning Decal (not shown)
Operator’s Manual, European
Operator’s Manual, Scandinavian
Operator’s Manual, East Bloc
Operator’s Manual, Baltic
Repair Parts Manual, English
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
ROTARY LAWN MOWER - - MODEL NUMBER M6556SMD (MFG. ID. NUMBER 96121001002)
ROTARY LAWN MOWER - - MODEL NUMBER M6556SMD (MFG. ID. NUMBER 96121001002)
ROTARY LAWN MOWER - - MODEL NUMBER M6556SMD (MFG. ID. NUMBER 96121001002)
KEY PART
KEY PART
NO. NO.
NO.
NO.
DESCRIPTION
DESCRIPTION
1
2
3
5
6
7
9
532 19 46-53
532 08 80-58
532 14 36-03
532 14 65-27
532 15 04-95
532 19 84-53
532 08 39-23
Drive Control Cable Assembly
Bearing, Wheel Adjuster
Pan Head Tapping Screw #10-24 x 2-3/4
V-Belt
Spring Retainer
Control Bar, Drive
Locknut, Hex
Wheel & Tire Assembly
E-Ring
Pinion
Dust Cover
Pawl, Drive
Washer
Selector Knob
Drive Cover
Kit, Wheel Adjuster, LH
(Includes Knob and Bearing)
Gear Case Assembly, Complete
Locknut, Hex 1/4-20
Spring
55 532 08 60-12
60 532 18 34-97 * Case, Lower
61 532 18 34-98 * Case, Upper
Driveshaft Cover
62 532 18 34-99
63 532 18 35-00
64 532 18 35-01
65 532 18 35-02
66 532 18 35-03
67 532 18 35-04
68 532 18 35-05
69 532 18 35-06
70 532 18 35-07
71 532 18 35-08
72 532 18 35-09
73 532 18 35-10
74 532 18 35-11
75 532 19 65-61
76 532 18 35-13
77 532 18 35-14
78 532 19 98-52
79 532 19 94-19
Gear, 27 Teeth
Lever, Clutch
Spring, Return
Shaft, Input
Dog, Movable
Dog, Fixed
Wire, Formed
Bearing, Ball
Fork, Shift
Seal, Output Shaft
Washer
Seal, Case
Bushing
Shaft, Output
Screw
11 532 40 29-36
12 812 00 00-58
13 532 40 38-49
14 532 18 94-03
15 532 19 10-17
16 532 06 77-25
18 532 08 78-77
28 532 19 58-11
35 532 40 88-03
36 532 19 92-06
38 873 80 04-00
40 532 13 70-90
41 532 40 88-02
Seal, Input Shaft
Drive Pulley
Pin, Retaining
Kit, Wheel Adjuster, RH
(Includes Knob and Bearing)
* Use Dow Corning #709 to reseal.
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
|