Panasonic Switch MA24D54 User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Schottky Barrier Diodes (SBD)  
MA24D54  
Silicon epitaxial planar type  
For rectication  
Unit: mm  
2.40 0.10  
0.15 0.05  
Features  
1
Forward current (Average) IF(AV) = 3.0Arectication is possible  
Small reverse current IR  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Reverse voltage  
Symbol  
VR  
Rating  
30  
Unit  
V
2
1.75 0.05  
Maximum peak reverse voltage  
Forward current (Average) *  
VRM  
30  
V
5°  
IF(AV)  
3.0  
A
Non-repetitive peak forward surge  
current  
IFSM  
Tj  
60  
A
Junction temperature  
Storage temperature  
150  
°C  
1: Anode  
2: Cathode  
T
stg  
–40 to +150  
°C  
TMiniP2-F1 Package  
Note) : 50 Hz sine wave 1 cycle (Non-repetitive peak current)  
*
Marking Symbol: 4S  
Electrical Characteristics Ta = 25°C±3°C  
Parameter  
Forward current  
Symbol  
Conditions  
Min  
Typ  
Max  
0.37  
2.0  
Unit  
V
VF  
IR  
IF = 3.0A  
VR = 30 V  
Reverse current  
mA  
pF  
Terminal capacitance  
Ct  
VR = 10 V, f = 1 MHz  
125  
40  
IF = IR = 100 mA, Irr = 10 mA  
1
Reverse recovery time *  
trr  
ns  
RL = 100 W  
2
3
*
Rth(j-a)  
Rth(j-a)  
55  
210  
10  
*
Thermal resistance  
°C/W  
Rth(j-l)  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.  
2. This product is sensitive to electric shock (static electricity, etc.). Due attention must be paid on the charge of a human body and the leakage  
of current from the operating equipment.  
3. 1: trr test Circuit  
*
Bias Application Unit (N-50BU)  
Input Pulse  
tp  
Output Pulse  
trr  
tr  
t
10%  
IF  
t
A
90%  
VR  
I
rr = 10 mA  
F = IR = 100 mA  
L = 100 Ω  
tp = 2 µs  
tr = 0.35 ns  
δ = 0.05  
I
R
Pulse Generator  
Wave Form Analyzer  
(SAS-8130)  
Ri = 50 Ω  
(PG-10N)  
Rs = 50 Ω  
2: Mounted on an alumina PC board (board: 50 mm × 50 mm × 0.8 t, soldering land: 1.4 mm × 2.1 mm)  
*
*
3: With a glass epoxy PC board (board: 50 mm × 20 mm × 1.0 t, soldering land: 2.0 mm × 2.0 mm + 20 mm × 0.8 mm)  
Publication date: March 2007  
SKH00160AED  
1
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Napoleon Fireplaces Outdoor Fireplace BGD42 User Manual
Nikon Binoculars 10x20HG L DCF User Manual
Nortel Networks IP Phone NN40050 109 User Manual
Optoma Technology Projector TX779P3D User Manual
Panasonic Flat Panel Television 58PF12UK User Manual
Panasonic Universal Remote AJ RC5 User Manual
ParaBody Home Gym 781 User Manual
Paradyne Network Hardware Paradyne FrameSaver User Manual
Parasound Home Theater System JC 2 BP User Manual
Patton electronic Network Card 2703 X21 User Manual