Panasonic Smoke Alarm 1728 User Manual

Fire alarm systems  
External Presentation unit  
1728  
For presentation of pre-warnings, fire alarms, faults & disablements  
Compact size  
Ventilation  
aktiverad), indicating activated output  
for ventilation equipment.  
(Brandventilation  
Presentation unit 1728  
This unit (S/W V1.2) is intended for pre-  
warning, fire and heavy smoke / heat alarm  
Fire  
brigade  
tx  
(Larmsändare  
presentation.  
Point or zone alarm  
aktiverad), indicating activated output  
for Fire brigade tx (routing equipment).  
presentation is like in the c.i.e. it is  
connected to. You can scroll amongst two  
or more alarms in the system but the fire  
alarms can not be reset via this unit. All or  
selected alarms will be presented in a  
display (LCD, 2x40 characters with back-  
light). An alarm text will be presented  
together with each alarm, if programmed in  
The unit has the following push buttons:  
Alarms queued (Flera larm), used to  
scroll amongst the alarms.  
Silence buzzer (Summer tyst), used to  
silence the buzzer (it will re-sound for a  
new alarm).  
the c.i.e.  
Furthermore, >617 texts for  
The designation texts on the front are in  
1728SE in Swedish and in 1728UK in  
English.  
selected alarms can be stored in the unit and  
will in such a case be shown, instead of the  
texts sent from the c.i.e. for these alarms. A  
built-in buzzer will sound like in the c.i.e. It  
can be silenced but the alarm devices in the  
installation can not be silenced via this unit.  
Any fault in the system will be presented as  
"General fault in system" and the buzzer will  
sound. It can be silenced. Any disablement  
in the system will be presented as "General  
disablement in system". The unit is power  
supplied via the c.i.e. or external power  
supply.  
Compact size  
The compact size enclosure is made of grey  
high impact ABS. Fitted with a supple-  
mentary "O" ring gasket, it will comply with  
IP61, in respect of dust and moisture. The  
push buttons on the front are disabled until  
they are supposed to be used. The unit shall  
be wall mounted. Two compression glands  
are attached.  
SW mode and address setting  
The display and the push buttons are used to  
set the SW mode and address, see the  
opposite side of this page.  
LEDs, push buttons etc.  
The unit has the following LEDs:  
Fire (Brand) and Alarms queued  
(Flera larm), indicating pre-warning,  
co-incidence and fire alarms.  
Operation (Drift), indicating that the  
unit is connected to a c.i.e. and power  
supplied, i.e. it is in operation.  
Product application  
The 1728 unit is intended for indoor use and  
in dry premises. SW mode 1728 - 1587 is  
intended to be used in the systems EBL512  
and EBL128 and SW mode 1728 – 1582 in  
the systems EBL500 / 512 / 1000 / 2000.  
Extinguishing  
(Släckanläggning  
aktiverad), indicating activated output  
for extinguishing equipment.  
Panasonic Electric Works Fire & Security Technology Europe AB  
Citadellsvägen 23, SE-211 18 Malmö, Sweden  
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99  
 

Miele Vacuum Cleaner S 4002 User Manual
Milwaukee Cordless Drill 0721 20 User Manual
Multiquip Portable Generator DLW 400ES User Manual
Multi Tech Systems IP Phone MVP 2400 User Manual
Nexotek IP Phone NT P100M User Manual
North Star Pressure Washer M157477A User Manual
NuVision Graphics Tablet TM785M3 User Manual
Oster Toaster 119308 User Manual
Oster Toaster TSSTTRWF2S User Manual
Panasonic Answering Machine KX FM189E User Manual