Panasonic Network Card MAZSxxx Series User Manual

Zener Diodes  
MAZSxxx Series  
Silicon planar type  
Unit: mm  
+0.05  
0.60  
For constant voltage, constant current, waveform clip-  
per and surge absorption circuit  
–0.03  
+0.05  
–0.02  
+0.05  
–0.03  
0.12  
0.80  
1
Features  
SS-Mini type 2-pin package (SSMini2-F1)  
Low noise type  
0.01 0.01  
2
VZ rank classified(VZ = 2.4 V to 39 V)  
0.30 0.05  
+0  
0
–0.05  
5˚  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
IFRM  
Ptot  
Rating  
200  
Unit  
mA  
mW  
°C  
Repetitive peak forward current  
Total power dissipation *  
Junction temperature  
1: Anode  
2: Cathode  
EIAJ: SC-79  
150  
Tj  
150  
SSMini2-F1 Package  
Storage temperature  
Tstg  
55 to +150  
°C  
Note) : With a printed circuit board  
*
Marking Symbol  
Refer to the list of the electrical  
characteristics within part numbers  
(Example) MAZS082 : 8  
MAZS0820L : 8_  
MAZS0820M: 8−  
MAZS0820H : 8^  
Note) L/M/H marked products will be supplied  
unless other wise specified  
Internal Connection  
1
1
2
Common Electrical Characteristics Ta = 25°C 3°C *  
Parameter  
Symbol  
VF  
Conditions  
Min  
Typ  
Max  
Unit  
V
Forward voltage  
IF = 10 mA  
0.9  
1.0  
2
Zener voltage *  
VZ  
IZ  
Specified value  
V
Reverse current  
IR  
VR Specified value  
µA  
Refer to the list of the  
Zener rise operating resistance  
Zener operating resistance  
Temperature coefficient of zener voltage *  
RZK  
RZ  
IZ  
IZ  
IZ  
Specified value  
Specified value  
Specified value  
electrical characteristics  
within part numbers  
3
SZ  
mV/°C  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.  
2. Rated input/output frequency: 5 MHz  
3. 1: The V value is for the temperature of 25°C. In other cases, carry out the temperature compensation.  
*
Z
2: Guaranteed at 20 ms after power application.  
*
*
3: T = 25°C to 150°C  
j
Publication date: March 2003  
SKE00012CED  
1
 
MAZSxxx Series  
Electrical characteristics within part numbers (continued) Ta = 25°C 3°C  
Temperature  
Reverse  
current  
IR (µA)  
VR  
Zener operating  
resistance  
coefficient of  
zener voltage  
Zener voltage  
VZ (V)  
Part Number  
RZ ()  
RZK ()  
SZ (mV/°C)  
Marking symbol  
IZ  
(mA)  
IZ  
(mA)  
IZ  
IZ  
(mA)  
Min Nom Max  
Max  
Max  
Max  
Typ  
(V)  
(mA)  
MAZS100  
9.40 10.00 10.60  
9.44 9.70 9.92  
9.75 10.00 10.25  
10.07 10.30 10.59  
10.40 11.00 11.60  
10.40 10.70 10.94  
10.73 11.00 11.28  
11.05 11.30 11.60  
11.40 12.00 12.70  
11.40 11.70 11.96  
11.73 12.00 12.33  
12.06 12.30 12.68  
12.40 13.00 14.10  
12.40 12.70 12.99  
12.73 13.00 13.40  
13.25 13.70 14.08  
13.90 15.00 15.60  
13.90 14.30 14.76  
14.60 15.00 15.35  
14.95 15.30 15.60  
15.30 16.00 17.10  
15.30 15.70 16.09  
15.70 16.00 16.50  
16.26 16.70 17.10  
16.90 18.00 19.10  
16.90 17.30 17.76  
17.55 18.00 18.45  
18.20 18.70 19.10  
18.80 20.00 21.20  
18.85 19.30 19.81  
19.50 20.00 20.50  
20.15 20.70 21.19  
20.80 22.00 23.30  
20.80 21.30 21.86  
21.45 22.00 22.55  
22.10 22.70 23.24  
22.80 24.00 25.60  
22.80 23.30 23.97  
23.50 24.00 24.70  
24.35 25.00 25.60  
25.10 27.00 28.90  
25.30 26.00 26.70  
26.30 27.00 27.70  
27.30 28.00 28.70  
28.00 30.00 32.00  
28.30 29.00 29.70  
29.30 30.00 30.80  
30.20 31.00 31.80  
31.00 33.00 35.00  
31.20 32.00 32.80  
32.20 33.00 33.80  
33.20 34.00 34.90  
10 or 10_ or 10or 10^  
MAZS1000L  
MAZS1000M  
MAZS1000H  
MAZS110  
MAZS1100L  
MAZS1100M  
MAZS1100H  
MAZS120  
MAZS1200L  
MAZS1200M  
MAZS1200H  
MAZS130  
MAZS1300L  
MAZS1300M  
MAZS1300H  
MAZS150  
MAZS1500L  
MAZS1500M  
MAZS1500H  
MAZS160  
MAZS1600L  
MAZS1600M  
MAZS1600H  
MAZS180  
MAZS1800L  
MAZS1800M  
MAZS1800H  
MAZS200  
MAZS2000L  
MAZS2000M  
MAZS2000H  
MAZS220  
MAZS2200L  
MAZS2200M  
MAZS2200H  
MAZS240  
MAZS2400L  
MAZS2400M  
MAZS2400H  
MAZS270  
MAZS2700L  
MAZS2700M  
MAZS2700H  
MAZS300  
MAZS3000L  
MAZS3000M  
MAZS3000H  
MAZS330  
10_  
10−  
10^  
5
5
5
5
5
5
5
5
5
5
2
2
2
0.05 7.0  
30  
5
60  
0.5  
0.5  
0.5  
0.5  
6.4  
5
11 or 11_ or 11or 11^  
11_  
11−  
11^  
0.05 8.0  
0.05 9.0  
30  
30  
5
5
5
5
5
5
5
5
5
2
2
2
60  
80  
80  
80  
80  
80  
7.4  
8.4  
9.4  
5
5
5
5
5
5
5
5
5
2
2
2
12 or 12_ or 12or 12^  
12_  
12−  
12^  
13 or 13_ or 13or 13^  
13_  
13−  
13^  
0.05 10.0 35  
0.05 11.0 40  
0.05 12.0 50  
0.05 13.0 60  
0.05 15.0 80  
0.05 17.0 80  
0.05 19.0 100  
0.05 21.0 120  
0.05 23.0 160  
0.05 25.0 200  
15 or 15_ or 15or 15^  
15_  
15−  
15^  
0.5 11.4  
0.5 12.4  
0.5 14.4  
16 or 16_ or 16or 16^  
16_  
16−  
16^  
18 or 18_ or 18or 18^  
18_  
18−  
18^  
20 or 20_ or 20- or 20^  
20_  
20−  
20^  
100 0.5 16.4  
100 0.5 18.4  
120 0.5 20.4  
120 0.5 23.4  
160 0.5 26.6  
200 0.5 29.7  
22 or 22_ or 22or 22^  
22_  
22−  
22^  
24 or 24_ or 24or 24^  
24_  
24−  
24^  
27 or 27_ or 27or 27^  
27_  
27−  
27^  
30 or 30_ or 30or 30^  
30_  
30−  
30^  
33 or 33_ or 33or 33^  
MAZS3300L  
MAZS3300M  
MAZS3300H  
33_  
33−  
33^  
SKE00012CED  
 
3
MAZSxxx Series  
Electrical characteristics within part numbers (continued) Ta = 25°C 3°C  
Temperature  
coefficient of  
zener voltage  
SZ (mV/°C)  
Reverse  
current  
IR (µA)  
VR  
Zener operating  
resistance  
Zener voltage  
VZ (V)  
Part Number  
RZ ()  
IZ  
RZK ()  
Marking symbol  
IZ  
(mA)  
IZ  
IZ  
(mA)  
Min Nom Max  
Max  
Max  
Max  
Typ  
(V)  
(mA)  
(mA)  
MAZS360  
34.00 36.00 38.00  
34.10 35.00 35.90  
35.10 36.00 36.90  
36.10 37.00 37.90  
37.00 39.00 41.00  
37.10 38.00 39.00  
38.00 39.00 40.00  
39.00 40.00 41.00  
36 or 36_ or 36or 36^  
MAZS3600L  
MAZS3600M  
MAZS3600H  
MAZS390  
MAZS3900L  
MAZS3900M  
MAZS3900H  
36_  
36−  
36^  
2
2
0.05 27.0 250  
0.05 30.0 300  
2
250 0.5 33.0  
300 0.5 35.6  
2
39 or 39_ or 39or 39^  
39_  
39−  
39^  
2
2
SKE00012CED  
 
4
MAZSxxx Series  
Ptot Ta  
IZ VZ  
IZ VZ  
250  
200  
150  
100  
50  
100  
10  
100  
10  
Ta = 25°C  
Static  
Ta = 25°C  
Static  
charac-  
teristics  
Heat sink  
Copper foil  
0.8 mm × 0.8 mm  
charac-  
teristics  
MAZS039  
1
1
0.1  
0.1  
0.01  
0.001  
0.01  
0.001  
MAZS047  
0
0
40  
80  
120  
160  
200  
0
2
4
6
8
10  
12  
0
10  
20  
30  
40  
50  
60  
(
)
Ambient temperature Ta °C  
(
)
(
)
V
Zener voltage VZ  
V
Zener voltage VZ  
IZ VZ  
IZ VZ  
RZ IZ  
100  
10  
100  
10  
1000  
100  
10  
Ta = 25°C  
Tj = 25°C  
Dynamic  
charac-  
Tj=25°C  
Dynamic  
charac-  
MAZS024  
MAZS390  
teristics  
teristics  
1
1
MAZS160  
MAZS043  
0.1  
0.1  
MAZS068  
MAZS082  
MAZS100  
MAZS062  
MAZS056  
0.01  
0.001  
0.01  
0.001  
MAZS051  
MAZS039  
MAZS047  
1
0.1  
0
10  
20  
30  
40  
50  
60  
0
2
4
6
8
10  
12  
1
10  
100  
1000  
(
)
V
Zener voltage VZ  
(
)
Zener voltage VZ  
V
(
)
Zener current IZ mA  
IF VF  
SZ IZ  
100  
10  
25  
20  
15  
10  
5
Ta = 25°C  
MAZS240  
MAZS160  
1
MAZS100  
MAZS068  
0.1  
0.01  
MAZS039  
MAZS024  
0
5  
0
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
0
10  
20  
30  
40  
50  
(
)
V
Forward voltage VF  
(
)
Zener current IZ mA  
SKE00012CED  
5
 
MAZSxxx Series  
PZSM tW  
Zth tW  
100  
10  
1
10  
1
Ta = 25°C  
PZSM  
Heat sink  
Copper foil 0.8 mm × 0.8 mm  
tW  
Non repetitive  
Without heat sink (Typ. value)  
MAZS075  
MAZS039  
With heat sink (Typ. value)  
0.1  
0.01  
0.1  
0.01  
0.1  
1
10  
100  
0.01  
0.1  
1
10  
100  
(ms)  
Pulse width tW  
Pulse width  
( )  
s
tW  
SKE00012CED  
 
6
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

MTD Log Splitter 243 638 000 User Manual
Multiquip Automobile Parts MTR40F User Manual
Multi Tech Systems Network Card RF820 User Manual
NAD DVD Player T524 User Manual
Nakamichi Stereo System SoundSpace 5 User Manual
Nikon Binoculars OMEGA Muzzleloading 3 9x40 User Manual
Nilfisk Advance America Vacuum Cleaner HSC 585 Multi User Manual
Optiquest Computer Monitor VS12105 User Manual
Oregon Scientific Camcorder ATC9K User Manual
ParaBody Home Gym PBF065 User Manual