Oregon Scientific Clock RRM310P User Manual

Alarm.....................................................................  
Projection unit......................................................  
Reset.....................................................................  
Warning.................................................................  
Technical Specifications......................................  
5
5
6
6
6
Radio-Controlled Projection Clock  
with FM Radio  
Model: RRM310P  
USER MANUAL  
Notices................................................................... 7  
CONTENTS  
Statement of responsibility..................................  
About Oregon Scientific......................................  
EU-Declaration of Conformity.............................  
7
7
8
Contents................................................................  
1
Introduction........................................................... 2  
Product Overview................................................... 2  
Front View...........................................................  
2
Back View............................................................ 2  
LCD Display......................................................... 3  
Getting Started...................................................... 3  
Batteries..............................................................  
Adapter................................................................  
3
3
Clock Reception.................................................... 4  
Clock .....................................................................  
FM Radio................................................................ 4  
4
Sleep...................................................................  
5
Backlight...............................................................  
5
1
 
9. RESET: Press to return all values to the default  
GETTING STARTED  
BATTERIES  
Insert batteries (2 x UM-4 / AAA 1.5V batteries) before  
first use, matching the polarity (+ and -). Press RESET  
after each battery change.  
settings  
10.  
11.  
12.  
: Switch radio on or off  
: Toggle through preset radio stations  
: Increase or decrease volume  
13. FM radio antenna wire  
LCD DISPLAY  
�  
Batteries are low, or there are no batteries installed  
and only the adapter is connected.  
��  
NOTE  
1. Time  
The batteries are for back-up use only. Please use  
the adapter for continuous use.  
It is recommended that you use alkaline batteries  
with this product for longer performance.  
Do not use rechargeable batteries with this  
product.  
2. 24 / 12 hr format  
3. Calendar / alarm display  
4. Alarm on / off  
5. Radio alarm on / off  
6. Offset time zone  
7. Radio-controlled clock reception  
8. Battery status  
9. Adapter is disconnected  
10. FM radio display / sleep / volume level / radio  
frequency  
11. Radio station  
ADAPTER  
The batteries serve as a back-up power supply. For  
continuous use of the projector, install the adapter at  
the base of the unit.  
3
 
To set the clock:  
NOTE To help conserve energy, turn the PROJ. ON  
1. Press and hold MODE for 2 seconds. The time zone  
offset hour digits will flash. When an offset hour has  
been set (e.g. +1), the time displayed will be the  
radio-controlled clock time plus 1 hour.  
switch to OFF when you do not wish to use it.  
CLOCK RECEPTION  
This product is designed to synchronize its calendar  
clock automatically once it is brought within 1500km  
(932 miles) of a radio signal (DCF-77 generated from  
Frankfurt, Germany).  
2. Press  
to change the setting.  
3. Press MODE to confirm the setting and move onto  
the next one.  
4. The setting sequence is: Time zone hour offset, 12 /  
24 hour format, hour, minute, year, MM / DD or DD /  
MM format, month, day and language for day of the  
week.  
NOTE For best results, place the clock away from metal  
or electrical objects, and near a window with a clear  
view to the sky.  
5. Press any key except SNOOZE / LIGHT to exit the  
setting mode.  
To turn the radio reception ON / OFF:  
Press  
and hold for 2 seconds.  
FM RADIO  
To play the radio:  
1. Press to switch the radio on.  
flashes when it is searching for a signal. No  
icon appears when the radio reception is OFF.  
2. Press  
3. Press  
to change the radio volume.  
to change radio frequency, press  
STRONG  
SIGNAL  
WEAK  
SIGNAL  
NO  
SIGNAL  
and hold for 2 seconds to enable auto-search for an  
available frequency.  
NOTE In order to conserve power, the FM radio only  
works when the adapter is plugged in.  
CLOCK  
Press MODE to toggle between:  
• Clock with seconds  
To save a radio station:  
Press and hold  
while on a frequency. A total of 8  
stations can be stored.  
• Clock with day  
• Clock with time zone offset  
4
 
To scroll through preset stations:  
6. Press  
to exit alarm setting mode.  
Press  
repeatedly.  
NOTE If the radio alarm time is reached when the  
adapter is not connected the unit will default to buzzer  
alarm.  
SLEEP  
The radio is equipped with a countdown sleep timer  
that can be set to switch the radio off after up to 120  
minutes.  
To activate / deactivate the alarm:  
Press  
. The respective alarm icon appears when the  
alarm has been activated.  
1. Press  
2. Press  
to enter sleep mode.  
to change the sleep time setting (120,  
To silence the alarm:  
90, 60, 45, 30, 15, 0).  
3. Press any key to exit sleep mode – the sleep timer  
will be automatically activated.  
Press SNOOZE / LIGHT to silence it for 8 minutes.  
The buzzer alarm or radio alarm icon will flash to  
show snooze is enabled.  
OR  
Press and hold SNOOZE / LIGHT to turn off the  
snooze function and reset the alarm for 24 hours  
time.  
BACKLIGHT  
Press SNOOZE / LIGHT to activate the backlight for  
8 seconds.  
OR  
Press any key except SNOOZE / LIGHT to mute  
any alarm and activate it again in 24 hours.  
ALARM  
Press  
to view the alarm display.  
NOTE The radio will remain on for 120 minutes if no  
key is pressed.  
To set the buzzer or radio alarm:  
1. Press and hold  
2. Use  
for 2 seconds.  
to change the setting.  
PROJECTION UNIT  
3. Press  
next one.  
to confirm the setting and move onto the  
The projection unit can display both time and alarm  
status. To use this feature:  
4. The setting sequence is: Hour, minute, alarm type  
(i.e. radio alarm or buzzer alarm).  
5. If radio alarm is selected, preset station and preset  
volume can also be altered.  
Slide the PROJ. ON switch to ON to activate  
continuous projection. However, this function will  
not work unless the adapter is used.  
5
 
Press the SNOOZE / LIGHT button to project the  
time and alarm status for 8 seconds.  
Remove the batteries if storing this product for a  
long period of time.  
Do not scratch the LCD display.  
Press the SNOOZE  
/
LIGHT twice to flip the  
projection image by 180 degrees  
Placement of this product on wood surfaces with  
certain types of finishes, such as clear varnish, may  
result in damage to the finish. Consult the furniture  
manufacturer’s care instructions for direction as to  
the types of objects that may safely be placed on  
the wood surface. Oregon Scientific shall not be  
responsible for any damage to wood surfaces from  
contact with this product.  
RESET  
Insert a thin blunt instrument into the RESET hole to  
return to the default settings.  
WARNINGS  
Do not dispose of this product as unsorted munici-  
pal waste. Collection of such waste separately for  
special treatment is necessary.  
This product is designed to give you years of service  
if handled properly. Oregon Scientific will not be  
responsible for any deviations in the usage of the device  
from those specified in the user instructions or any  
unapproved alterations or repairs of the product.  
Observe the following guidelines:  
NOTE The technical specification of this product and  
contents of this user manual are subject to change  
without notice. Images not drawn to scale.  
Do not clean any part of the product with benzene,  
thinner or other solvent chemicals - this may cause  
permanent damage that is not covered by the  
guarantee. When necessary, clean it with a damp  
cloth.  
Never immerse the product in water. This can cause  
electrical shock and damage the product.  
Do not subject the product to extreme force, shock,  
or fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of  
different types.  
TECHNICAL SPECIFICATIONS  
TYPE  
DESCRIPTION  
Dimensions  
L X W X H  
112 x 53 x 92 mm  
(4.41 x 2.08 x 3.62 inches)  
Weight (without  
battery  
130 g (0.29 lbs)  
Do not use rechargeable batteries with this  
product.  
6
 
Radio-controlled clock  
Oregon Scientific will not be responsible for any  
deviations in the usage of the device from those  
specified in the user instructions or any unapproved  
alternations or repairs of the product.  
Clock Frequency  
System  
DCF77  
Synchronization  
FM Band Range  
Clock  
Auto or disabled  
87.5-108.0 MHz  
HH:MM:SS  
ABOUT OREGON SCIENTIFIC  
HH:MM: Day of week  
HH:MM: Time zone hour offset  
Visitourwebsite(www.oregonscientific.com)tolearnmore  
about Oregon Scientific products such as digital cameras;  
MP3 players; children’s electronic learning products and  
games; projection clocks; health and fitness gear; weath-  
er stations; and digital and conference phones. The web-  
site also includes contact information for our Customer  
Care department in case you need to reach us, as well as  
frequently asked questions and customer downloads.  
Hour Format  
Calendar  
12hr / 24 hr format  
DD / MM or MM / DD, user  
selectable. Weekday language:  
E, D, F, I, S.  
Alarm  
Power  
• 2-minute alarm  
• 8-minute snooze  
2 x UM-4 / AAA 1.5V batteries or  
4.5V AC adapter  
We hope you will find all the information you need on our  
website, however if you’re in the US and would like to  
contact the Oregon Scientific Customer Care department  
directly, please visit:  
NOTE It is recommended that you use alkaline  
batteries with this product for longer performance.  
www2.oregonscientific.com/service/default.asp  
NOTE Design and specifications are subject to  
OR  
change without notice.  
Call 1-800-853-8883.  
NOTICES  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international.asp  
STATEMENT OF RESPONSIBILITY  
Oregon Scientific will not be held liable for any  
bodily injury, death, property damages, or any other  
claims of whatever nature resulting from the misuse  
or negligence of the product, whether intentional or  
unintentional.  
7
 
EU-DECLARATION OF CONFORMITY  
Hereby, Oregon Scientific, declares that this  
Radio-Controlled Projection Clock with FM Radio  
(Model RRM310P) is in compliance with the essential  
requirements and other relevant provisions of Directive  
1999/5/EC.  
Acopy of the signed and dated Declaration of Conformity  
is available on request via our Oregon Scientific  
Customer Service.  
COUNTRIES RTTE APPROVAL COMPLIED  
CH  
All EU countries, Switzerland  
N
and Norway  
8
 

Miele Refrigerator K 8952 SD ed 1 User Manual
Nikon Camera Lens 2188 User Manual
Nordic Star Products All in One Printer 43A User Manual
Nortel Networks Telephone ICS 41 User Manual
Oki Printer Accessories X400 User Manual
Oki Printer C9000 Series User Manual
Olevia Flat Panel Television 265T FHD User Manual
Optimus Speaker PRO CS 5 User Manual
Oregon Clock RRM320P User Manual
Oster Toaster 6240 User Manual