40-4067.fm Page 1 Wednesday, August 11, 1999 10:01 AM
Cat. No. 40-4067
PRO LX10 Dual-Woofer Tower Speaker
Important: Be sure you remove the
protective packing materials before
using the speaker (see the separate
“Special Precautions” included with
your speaker).
The LX10 produces high sound quality
with very low distortion, and actually
delivers decreasing distortion as the
sound moves to the higher frequency
ranges.
The 7-inch driver is specially designed
to accurately produce all sounds from
45 Hz to 2,200 Hz. The pliable dia-
phragm in the 2 × 4-inch driver can ac-
curately produce sounds from 2,200
Hz to 25,000 Hz with extraordinarily
low distortion. The tweeter’s unique
design means there is virtually no
physical limitation to its high-frequen-
cy sound production.
The speaker cabinet is finished in
black woodgrain vinyl. The black cloth
grilles are acoustically transparent,
and you can remove them for safe and
easy cleaning.
The LX10’s features include:
Acoustic Design — provides broad,
smooth frequency response.
OPTIMUS
360° Wide-Dispersion Tweeter —
reproduces frequencies over 20 kHz
and uses a pliable diaphragm to re-
duce or eliminate distortion caused by
excess vibration.
Your Optimus PRO LX10 Tower
Speaker’s internal elements were ex-
clusively designed to give you amaz-
ing music reproduction from a floor
speaker.
High-Compliance Woofer — accu-
rately tracks signals to provide out-
standing bass.
© 1997 Tandy Corporation.
All Rights Reserved.
Optimus and RadioShack are registered trademarks used by Tandy Corporation.
40-4067.fm Page 3 Wednesday, August 11, 1999 10:01 AM
3. Turn the left speaker’s negative (–)
MAINTENANCE
terminal
counterclockwise
to
loosen it, and insert one of the
unmarked wire ends into the
opening. Then turn the terminal
clockwise to tighten it.
Your Optimus PRO LX10 Tower
Speaker is an example of superior de-
sign and craftsmanship. The following
suggestions will help you care for your
speaker so you can enjoy it for years.
• Keep the speaker dry. If it gets
wet, wipe it dry immediately.
• Handle the speaker gently and
carefully.
• Use and store the speaker only in
normal
ments.
temperature
environ-
• Keep the speaker away from dust
and dirt, which can cause prema-
ture wear of parts.
Note: You can also use banana
plugs to make this connection.
• Wipe the speaker with a damp
cloth occasionally to keep it look-
ing new.
4. Turn the left speaker’s positive (+)
terminal
counterclockwise
to
loosen it, and insert the marked
conductor’s wire end into the
opening. Then turn the terminal
clockwise to tighten it.
Caution: Do not clean the speaker
with a vacuum cleaner. This might
permanently damage it. Clean the
speaker with a feather duster or soft
cloth.
5. Connect the opposite end of the
left speaker’s unmarked wire to the
receiver/amplifier’s left negative (–)
terminal.
Modifying or tampering with the
speaker’s internal components can
cause a malfunction and might invali-
date the speaker’s warranty. If your
speaker is not performing as it should,
take it to your local RadioShack store
for assistance.
Then connect the opposite end of
the left speaker’s marked wire to
the receiver/amplifier’s positive (+)
terminal.
6. Repeat Steps 3–5 to connect the
right speaker.
3
40-4067.fm Page 4 Wednesday, August 11, 1999 10:01 AM
SPECIFICATIONS
Frequency Response .........................................................................................50-25,000 Hz
Power Handling ............................................................................................. 80 Watts (RMS)
Maximum Power ......................................................................................................160 Watts
Impedance ................................................................................................. 8 Ohms (Nominal)
Speaker Complement .......................................... 7-Inch (17.8 cm) High-Compliance Woofer
2 × 4-Inch (5 × 10 cm) Wide-Angle Dipole Tweeter
Enclosure .......................................................................................... Black Wood Grain Vinyl
Dimensions(HWD) ............................................ 34 × 9 × 1015/16 Inches (86 × 23 × 27.7 cm)
Weight ............................................................................................................ 32 lbs (14.5 kg)
Specifications are typical; individual units might vary. Specifications are subject to change
and improvement without notice.
Limited Five-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under nor-
mal use for five (5) years from the date of purchase from RadioShack company- owned stores and authorized
RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN
LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROP-
ERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-
AGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or
consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as
proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law:
(a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the
same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which
a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in
the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of
the original warranty period. You will be charged for repair or replacement of the product made after the expira-
tion of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident,
misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alter-
ation, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a Ra-
dioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e)
transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment
or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A7
Printed in Malaysia
|