42-5065.fm Page 1 Thursday, August 12, 1999 9:47 AM
Cat. No. 42-5065
OWNER’S MANUAL
Please read before using this equipment.
CD-3520
Portable Compact Disc Player
42-5065.fm Page 3 Thursday, August 12, 1999 9:47 AM
Important: You need a pair of stereo
earphones or amplified speakers or a
home audio or car stereo system to
use your CD-3520. Your local Ra-
dioShack store carries a complete line
of earphones, speakers, and audio
systems.
We recommend you record the CD
player’s serial number here. The num-
ber is on the back panel.
Serial Number __________________
CDs that can be played on this player
have this mark on them:
The CD player’s advanced technology
makes it simple to operate. But, be
sure you read this Owner’s Manual
completely so you can take advantage
of all its advanced features.
3
42-5065.fm Page 4 Thursday, August 12, 1999 9:47 AM
CONTENTS
Choosing a Power Source .................................................................................. 5
Using Batteries ................................................................................................ 5
Installing Batteries ..................................................................................... 5
Charging Nickel-Cadmium Battery Packs ................................................. 6
Charging Tips ............................................................................................ 6
Using AC Power .............................................................................................. 7
Using Vehicle Battery Power ........................................................................... 8
Connections ......................................................................................................... 9
Connecting Earphones .................................................................................... 9
Listening Safely ......................................................................................... 9
Traffic Safety ............................................................................................. 9
Connecting Amplified Speakers .................................................................... 10
Connecting to a Home Audio System ............................................................ 10
Connecting to an Auto Sound System ........................................................... 10
Operation ............................................................................................................ 12
Playing a CD .................................................................................................. 12
Locking the Controls ...................................................................................... 13
Audible Search .............................................................................................. 13
Automatic Search Music System (ASMS) ..................................................... 14
Pause and Cue .............................................................................................. 14
Intro Scan ...................................................................................................... 14
Repeat Play ................................................................................................... 15
Random Play ................................................................................................. 15
Programmed Play .......................................................................................... 15
Troubleshooting ................................................................................................. 17
Care and Maintenance ....................................................................................... 18
CD Care Tips ................................................................................................. 19
FCC Information ............................................................................................ 19
Laser Safety .................................................................................................. 19
Specifications ..................................................................................................... 20
4
42-5065.fm Page 5 Thursday, August 12, 1999 9:47 AM
CHOOSING A POWER SOURCE
You can power your CD player from:
2. Place four AA batteries or two
rechargeable nickel-cadmium bat-
tery packs in the compartment as
indicated by the polarity symbols
(+ and –) marked on the bottom of
the CD player.
• Four AA alkaline batteries or two
rechargeable nickel-cadmium bat-
tery packs (none supplied)
• Standard AC power, using an AC
adapter (not supplied)
Cautions:
• A vehicle’s battery power, using a
DC adapter (not supplied)
• Use only batteries of the
required size and type.
• Never mix fresh and old batter-
ies,
alkaline
and
nickel-
USING BATTERIES
cadmium battery packs, or
nickel-cadmium batteries of dif-
ferent capacities.
You can power your CD player from
four AA alkaline batteries (such as Ra-
dioShack Cat. No. 23-552) or two re-
chargeable nickel-cadmium battery
packs (Cat. No. RSU 11377181, avail-
able through your local RadioShack
store). The CD player can recharge
the nickel-cadmium battery packs
while they are in the CD player.
• If you do not plan to use the CD
player for a month or more,
remove and store the batteries.
3. Close the battery compartment
cover.
Replace or recharge the batteries
when
flashes on the display, the
Installing Batteries
sound distorts, or the volume weak-
ens.
Cautions:
• Always dispose of old batteries
promptly and properly.
• Never heat, disassemble, or throw
batteries into a fire.
• Never leave dead, old, or weak
batteries in the CD player. Batter-
ies can leak chemicals that cor-
rode or damage electronic
circuits.
1. Slide the battery compartment
cover in the direction of the arrow,
then lift it open.
5
42-5065.fm Page 6 Thursday, August 12, 1999 9:47 AM
Charging Nickel-Cadmium
Battery Packs
Charging Tips
• Always keep the charging termi-
nals clean. Use a cotton swab
dipped in alcohol to clean the ter-
minals.
Nickel-cadmium battery packs come
fully discharged. You can charge the
special-order batteries while they are
in the battery compartment using an
AC adapter (such as Cat. No. 273-
1664, not supplied) or DC adapter
(such as Cat. No. 273-1801, not sup-
plied).
• Under normal usage conditions,
the nickel-cadmium battery packs
can be recharged about 500
times.
Warning: Do not try to charge non-
rechargeable batteries. The batteries
can become very hot and possibly ex-
plode.
• Fully discharge the battery packs
occasionally by playing the CD
player until it no longer plays.
Then fully recharge the battery
packs. This helps restore the bat-
tery packs’ full charging capacity.
Follow these steps to recharge nickel-
cadmium battery packs while they are
in the battery compartment.
• Avoid charging the batteries in a
hot environment (more than
113°F) as this can permanently
reduce the battery packs’ charg-
ing capacity.
1. Connect an AC or DC adapter.
See “Using AC Power” on Page 7
or “Using Vehicle Battery Power”
on Page 8.
Notes:
• Do not overcharge the battery
packs. Overcharging can severely
reduce the battery packs’ useful
life.
• It takes about 15 hours to
charge fully discharged nickel-
cadmium batteries.
• You can play a CD while
recharging the batteries; how-
ever, this could cause the bat-
teries to recharge more slowly.
• Do not short-circuit the battery
packs’ terminals (+ and –).
2. When the nickel-cadmium battery
packs fully charge, unplug the
adapter from the AC outlet or cig-
arette lighter socket, then discon-
nect the adapter from the CD
player.
6
42-5065.fm Page 7 Thursday, August 12, 1999 9:47 AM
Important: This portable CD player is
capable of using rechargeable nickel-
cadmium battery packs. At the end of
the battery packs’ useful life, they
must be recycled or disposed of prop-
erly. Contact your local, county, or
state hazardous waste management
authorities for information on recycling
or disposal programs in your area.
Some options that might be available
are: municipal curb-side collection,
drop-off boxes at retailers, recycling
collection centers, and mail-back pro-
grams.
Follow these steps to use an AC
adapter.
DC IN 6V
1. Attach the 4.0 mm outer diameter/
1.7 mm inner diameter barrel plug
to the adapter cord, matching the
positive (+) on the plug with TIP
on the cord.
2. Set the adapter’s voltage switch to
6V.
USING AC POWER
3. Insert the adapter’s barrel plug
You can power the CD player from a
standard AC outlet using an AC
adapter, such as Cat. No. 273-1664
(not supplied).
DC IN 6V
into the CD player’s
jack.
Note: Battery power disconnects
when you connect an AC adapter
to the CD player (unless you are
using nickel-cadmium battery
packs).
Cautions:
• You must use an AC adapter that
supplies 6 volts and delivers at
least 550 milliamps. Its center tip
must be set to positive, and its
plug must correctly fit the CD
4. Plug the other end of the adapter
into a standard AC outlet.
DC IN 6V
player’s
jack. The recom-
mended adapter meets these
specifications. Using an adapter
that does not meet these specifi-
cations could damage the CD
player or the adapter.
• When you finish using the AC
adapter, disconnect it from the AC
outlet first, then unplug it from the
CD player.
7
42-5065.fm Page 8 Thursday, August 12, 1999 9:47 AM
Follow these steps to use your vehi-
cle’s battery power.
USING VEHICLE
BATTERY POWER
DC IN 6V
You can power your CD player from
your vehicle’s battery using a DC
adapter, such as Cat. No. 273-1801
(not supplied).
Cautions:
1. Attach the 4.0 mm outer diameter/
1.7 mm inner diameter barrel plug
to the adapter cord, matching the
positive (+) on the plug with TIP
on the cord.
• You must use a DC adapter that
supplies 6 volts and delivers at
least 550 milliamps. Its center tip
must be set to positive, and its
plug must correctly fit the CD
DC IN 6V
player’s
jack. The recom-
2. Set the adapter’s voltage switch to
6V.
mended adapter meets these
specifications. Using an adapter
that does not meet these specifi-
cations can damage the CD
player or the adapter.
3. Insert the adapter’s barrel plug
DC IN 6V
into the CD player’s
jack.
Note: Battery power disconnects
when you connect a DC adapter
to the CD player (unless you are
using nickel-cadmium battery
packs).
• Disconnect the adapter from the
cigarette-lighter socket when you
are not using it to prevent the
vehicle’s battery from being
drained.
4. Plug the other end of the adapter
into your vehicle’s cigarette-lighter
socket.
• Always disconnect the adapter
from the cigarette-lighter socket
before you unplug it from the CD
player.
• If you park your vehicle in the sun,
temperatures inside can easily
reach levels that could damage
your CD player and your CDs. To
prevent heat damage, avoid leav-
ing your CD player or CDs in your
vehicle.
8
42-5065.fm Page 9 Thursday, August 12, 1999 9:47 AM
CONNECTIONS
You can listen to your CD player by
connecting stereo earphones or am-
plified speakers to the player’s
PHONES jack, or by connecting the
player’s LINE OUT jack to a home au-
dio or car stereo system.
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones.
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
Notes:
• If you use the PHONES jack, use
the CD player’s VOLUME control
to adjust the volume.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
• If you use the LINE OUT jack, use
the home audio or car stereo sys-
tem’s volume control to adjust the
volume.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
CONNECTING
EARPHONES
Traffic Safety
For private listening, plug a pair of ste-
reo earphones with a 1/8-inch plug (not
supplied) into the CD player’s
PHONES jack.
Do not wear earphones while operat-
ing a motor vehicle or riding a bicycle.
This can create a traffic hazard and
can be illegal in some areas.
Even though some earphones let you
hear some outside sounds when lis-
tening at normal volume levels, they
still can present a traffic hazard.
9
42-5065.fm Page 10 Thursday, August 12, 1999 9:47 AM
CONNECTING
AMPLIFIED SPEAKERS
CONNECTING TO AN
AUTO SOUND SYSTEM
To listen to your CD player through a
pair of amplified speakers (not sup-
plied), plug the amplified speakers’ 1/8-
You can listen to your CD player
through your auto sound system in
one of three ways.
PHONES
inch plug into the CD player’s
jack.
If your auto sound system has LINE IN
jacks — connect the supplied Y-
cable’s 1/8-inch plug to the CD player’s
PHONES
LINE OUT
jack. Then connect the Y-
cable’s phono plugs to your auto
sound system’s LINE IN input jacks.
(If the jacks on your equipment do not
match the plugs on the cable, check
with your local RadioShack store for
the proper cable adapter.)
CONNECTING TO A
HOME AUDIO SYSTEM
To listen to your CD player through
your home audio system’s amplifier/
receiver and full-size speakers, con-
nect the supplied Y-cable’s 1/8-inch
LINE OUT
plug to the CD player’s
jack.
Auto Sound System with
Two LINE IN Jacks
Then connect the Y-cable’s phono
plugs to the CD, AUX, or TV audio
LEFT and RIGHT input jacks on your
amplifier/receiver. (If the jacks on your
equipment do not match the plugs on
the Y-cable, check with your local Ra-
dioShack store for the proper cable
adapter.)
Amplifier/Receiver with
LEFT and RIGHT Input Jacks
10
42-5065.fm Page 11 Thursday, August 12, 1999 9:47 AM
If your auto sound system has a CD
input jack — you need a stereo /8-
If your auto sound system has a cas-
sette player — you can use a CD-to-
cassette adapter, such as Cat. No. 12-
1951. Insert the adapter into your
car’s cassette player just as you would
insert a regular cassette. Then con-
nect the CD-to-cassette adapter’s
cord to the CD player’s PHONES jack.
1
inch patch cable, such as Cat. No. 42-
2387. Connect one end to the CD
player’s LINE OUT jack and the other
end to the auto sound system’s CD
INPUT jack.
PHONES
Auto Sound System with
CD INPUT Jack
You can mount your CD player in your
car using a mounting bracket. Your lo-
cal RadioShack store has a complete
line of mounting kits.
11
42-5065.fm Page 12 Thursday, August 12, 1999 9:47 AM
OPERATION
4. Press PLAY/PAUSE. The CD
player automatically turns on, 00
momentarily flashes on the dis-
play, then Track 1 begins to play.
The display shows the current
track number.
PLAYING A CD
1. Set HOLD to OFF.
2. Press OPEN and lift the disc com-
partment cover.
Press MEMORY/TIME to display
the current track’s elapsed time.
Press MEMORY/TIME again to
return to the current track number.
3. Carefully place the CD, label side
up, over the disc compartment’s
center hub. Press the button on
the hub gently so the CD lies flat
in the compartment. Then close
the compartment cover.
5. Adjust the volume to a comfort-
able listening level.
• If you connected earphones,
amplified speakers, or a CD-to-
cassette adapter to the CD
player’s PHONES jack, set VOL-
UME on the CD player to the
desired level.
Hub
12
42-5065.fm Page 13 Thursday, August 12, 1999 9:47 AM
• If you connected the CD
player’s LINE OUT jack to ampli-
fied speakers, your home audio
system, or your car’s stereo,
use the volume controls on
those units to set the desired
volume as needed.
LOCKING THE
CONTROLS
To prevent accidentally turning the CD
player on or off, or changing the track
you are listening to, set HOLD to ON.
No controls work (except OPEN, VOL-
UME, E-BASS, and HOLD).
• To enhance the bass sound, set
E-BASS to IN.
Set HOLD to OFF to operate the con-
trols again.
AUDIBLE SEARCH
Use audible search during play to rap-
idly search forward or backward to lo-
cate a specific section of a track.
During audible search, the CD plays
at a lower volume and a higher speed.
The current track’s elapsed time ap-
pears on the display.
6. When the last track finishes play-
ing, the display alternately shows
the total number of tracks and
total playing time of the CD for
about 2 minutes, then the CD
player automatically stops and
turns off. To turn off the CD player
before it automatically turns off,
press STOP/CLEAR.
To search forward, press and hold
. To search backward, press and
hold
. To resume normal play, re-
lease the control.
If you hold down
while the
Note:
last track is playing, audible search
starts again at the beginning of that
same track. If you hold down
,
audible search stops at the beginning
of Track 1.
13
42-5065.fm Page 14 Thursday, August 12, 1999 9:47 AM
To cue a track in a programmed se-
quence (see “Programmed Play” on
AUTOMATIC SEARCH
MUSIC SYSTEM (ASMS)
PLAY/PAUSE
Page 15), press
the CD.
Press
to pause
flashes on the display.
or to display the
You can use ASMS before or during
regular or programmed play (see “Pro-
grammed Play” on Page 15) to quickly
locate any track on a CD.
track you want to cue.
PLAY/
To play the cued track, press
PAUSE
.
During play, press
the beginning of the current track.
Press again to return to the be-
to return to
INTRO SCAN
ginning of the previous track.
The intro scan feature automatically
plays the first 10 seconds of each
track on a CD.
To move to the beginning of the next
track, press
.
While the CD is stopped, repeatedly
press or to move backward
or forward to the desired track.
PLAY
During play, repeatedly press
MODE
until I appears on the display.
Intro scan starts from the first track.
PLAY
To return to normal play, press
MODE
PAUSE AND CUE
. I disappears from the display
and the CD player resumes normal
play.
To temporarily pause play, press
PLAY/PAUSE
play. Press
sume play.
.
flashes on the dis-
PLAY/PAUSE
again to re-
Notes:
• Intro scan plays the tracks in the
programmed order if you have
programmed a sequence (see
“Programmed Play” on Page 15).
PLAY/PAUSE
You can also use
a track. When the CD player is
stopped, press or to select
the track you want to cue. Then press
to cue
PLAY/PAUSE
twice.
flashes on the
• You can use
and
to
display.
skip through the tracks.
14
42-5065.fm Page 15 Thursday, August 12, 1999 9:47 AM
REPEAT PLAY
RANDOM PLAY
Your CD player can repeatedly play a
single track, the entire CD, or a pro-
grammed sequence (see “Pro-
grammed Play” on this page).
In random play, the CD player plays
all the tracks once in random order,
then automatically stops. To start ran-
PLAY
dom play, repeatedly press
MODE
until R appears on the display.
To repeat a single track — before or
PLAY MODE
during play, press
once
Note: If you select random play during
programmed play, the CD player
stops the programmed sequence and
starts random play of all tracks.
so 1 appears on the display. At the
end of the track, the CD player repeat-
edly plays it.
PLAY
To cancel random play, press
MODE
so R disappears from the dis-
play.
PROGRAMMED PLAY
You can program up to 24 tracks on a
CD to play in any order you choose,
and you can program the same track
to play more than once.
To repeat an entire CD or a series of
programmed tracks — before or dur-
ing regular or programmed play, press
PLAY MODE
twice so
appears on
the display. When the CD player
reaches the end of the CD or the pro-
grammed sequence, it returns to the
first track and continuously replays all
the tracks.
Follow these steps to program a se-
quence.
PLAY/PAUSE
1. Press
to start the CD
STOP
player, then press
.
MEMORY/TIME
2. Press
. The selec-
tion number (01) and the track
number (00) appear as M flashes
on the display.
3. Press either
or
to dis-
play the number of the first track
you want to program.
15
42-5065.fm Page 16 Thursday, August 12, 1999 9:47 AM
4. Press MEMORY/TIME to store the
selected track number. The selec-
tion number advances by one and
the track number on the display
returns to 00.
press MEMORY/TIME, the dis-
play shows the number of the
next track in the sequence.
• To add to the end of a pro-
grammed sequence, repeatedly
press MEMORY/TIME until track
number 00 appears on the dis-
play. Then follow Steps 3 and 4.
5. Repeat Steps 3 and 4 for each
track you want to program, up to
24 tracks.
If you try to store more than
24 tracks in memory, FuLL
appears on the display.
To clear the programmed se-
quence from memory, press
STOP/CLEAR twice.
Note:
6. To
play
the
programmed
sequence, press PLAY/PAUSE. M
lights steadily and the first track in
the sequence plays.
While the programmed sequence
plays, you can use
to move
forward or
to move backward
in the sequence.
7. After the last programmed track
ends, the CD player stops. To
manually stop the CD before the
end of the sequence, press STOP/
CLEAR.
Notes:
• To
replay
the
program
sequence, press PLAY/PAUSE
within 2 minutes after the CD
player stops. Otherwise, the CD
player turns off and clears the
programmed sequence.
• To check the programmed
sequence, press MEMORY/TIME
within 2 minutes after the CD
player stops. The display shows
the number of the first pro-
grammed track. Each time you
16
42-5065.fm Page 17 Thursday, August 12, 1999 9:47 AM
TROUBLESHOOTING
If you have problems operating your CD player, check this chart for a solution. If
these suggestions do not solve the problem, contact your local RadioShack store
for assistance.
Problem
Possible Cause
Remedy
Operation controls do
not work.
Hold function is active.
No power.
Set HOLD to OFF.
Check the batteries or
adapter.
CD is loaded, but it
does not start.
CD is loaded upside
down.
Reload the CD, label side
up.
CD is dirty.
Clean the CD or try a dif-
ferent CD. See “CD Care
Tips” on Page 19.
The sound skips.
CD is dirty or
scratched.
Clean the CD or try a dif-
ferent CD. See “CD Care
Tips” on Page 19.
Vibration is heavy.
Try not to vibrate the CD
player.
17
42-5065.fm Page 18 Thursday, August 12, 1999 9:47 AM
CARE AND MAINTENANCE
Your Optimus CD-3520 Portable Compact Disc Player is an example of superior de-
sign and craftsmanship. The following suggestions will help you care for your CD
player so you can enjoy it for years.
Keep the CD player dry. If it gets wet, wipe it dry immediately. Liquids
might contain minerals that can corrode the electronic circuits.
Use and store the CD player only in normal temperature environ-
ments. Temperature extremes can shorten the life of electronic de-
vices and distort or melt plastic parts.
Keep the CD player away from dust and dirt, which can cause prema-
ture wear of parts.
Handle the CD player gently and carefully. Dropping it can damage
circuit boards and cases and can cause the CD player to work im-
properly.
Use only fresh batteries of the required size and type. Old batteries
can leak chemicals that damage your CD player’s electronic parts.
Wipe the CD player with a damp cloth occasionally to keep it looking
CLEANER
new. Do not use harsh chemicals, cleaning solvents, or strong deter-
gents to clean the CD player.
Modifying or tampering with the CD player’s internal components can cause a mal-
function and might invalidate your CD player’s warranty and void your FCC authori-
zation to operate it. If your CD player is not performing as it should, take it to your
local RadioShack store for assistance.
18
42-5065.fm Page 19 Thursday, August 12, 1999 9:47 AM
CD CARE TIPS
FCC INFORMATION
• If you move the player from a very
cold room to a warmer one, mois-
ture can condense on the pickup
lens, preventing proper CD play. If
this happens, wait 1 hour for the
moisture to evaporate before
resuming play.
This equipment complies with the lim-
its for a Class B digital device as spec-
ified in Part 15 of FCC Rules. These
limits provide reasonable protection
against radio and TV interference in a
residential area. However, your CD
player might cause TV or radio inter-
ference even when it is operating
properly. To eliminate interference,
you can try one or more of the follow-
ing corrective measures:
• Do not place anything but a CD in
the disc tray. Doing so can dam-
age the drive mechanism.
• During playback, a severe shock
or jolt could make the CD’s rota-
tion speed change suddenly and
produce some noise. This is not a
malfunction.
• Increase the distance between the
CD player and the radio or TV.
• Use outlets on different electrical
circuits for the CD player and the
radio or TV.
• Always handle a CD by the edges
and keep it in its protective case
or sleeve when it is not in use.
Fingerprints and scratches on the
CD’s surface can prevent the
laser beam from correctly reading
the digital information. To clean
the CD, use a CD cleaner kit
(RadioShack Cat. No. 42-226).
• Consult your local RadioShack
store if the problem still exists.
LASER SAFETY
This unit employs a laser. Only quali-
fied service persons should remove
the cover or attempt to service this de-
vice, due to possible eye injury.
• A scratch on the CD’s surface can
make the CD skip or stop playing.
If the CD gets scratched, use
Scratch ’n Fix (RadioShack Cat.
No. 42-127) to repair the scratch.
Warning: The use of controls or ad-
justments or the performance of pro-
cedures other than specified herein
can result in hazardous exposure to
laser light.
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam focus.
19
42-5065.fm Page 20 Thursday, August 12, 1999 9:47 AM
SPECIFICATIONS
AUDIO
Frequency Response (±3 dB) ........................................................... 20–20,000 Hz
Dynamic Range ............................................................................................. 80 dB
Signal-to-Noise Ratio ..................................................................................... 80 dB
Harmonic Distortion at 1 kHz ........................................................................ 0.07%
Separation at 1 kHz ....................................................................................... 70 dB
Wow/Flutter .................................................................................... Not Measurable
Earphones Output (10% THD at 32 ohm) ..................................... 10 mW + 10 mW
Line Output .................................................................................................. 0.55 W
DISC
Diameter .............................................................. Standard 5-Inch and 3-Inch CDs
SIGNAL FORMAT
Sampling Frequency ................................................................................. 44.1 kHz
Oversampling .............................................................................................. 4 Times
Quantization Number ............................................................ 16-Bit Linear/Channel
Transmission Bit Rate ............................................................... 4.3218 Mb/Second
Signal-Processing Rate .......................................................................... 176.4 kHz
PICK-UP
Tracking System ....................................................... 3-Beam Tracking Servo Type
Object Lens Drive System ......................................... 2-Dimensional Parallel Drive
Optical Source ....................................................................... Semiconductor Laser
Wavelength .................................................................................................. 780 nm
20
42-5065.fm Page 21 Thursday, August 12, 1999 9:47 AM
GENERAL
Power Requirements ................................................ DC 6V; Four AA Size Alkaline
or Two Rechargeable
Nickel-Cadmium Battery Packs (Not Included),
Optional AC Adapter (273-1664),
or Optional DC Adapter (273-1801)
Power Consumption .......................................................................................... 8 W
Battery Life (EIAJ Method) .......................................................................... 7 Hours
Dimensions (HWD) ........................ 15/16 × 51/4 × 61/4 Inches (33.3 × 134 × 159 mm)
Weight (without batteries) .................................................................. 9.7 oz (275 g)
Included Accessory .................................................................................... Y-Cable
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
21
42-5065.fm Page 22 Thursday, August 12, 1999 9:47 AM
NOTES
22
42-5065.fm Page 23 Thursday, August 12, 1999 9:47 AM
23
42-5065.fm Page 24 Thursday, August 12, 1999 9:47 AM
RadioShack Limited Warranty
This product is warranted against defects for 1 year from date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and deal-
ers. Within this period, we will repair it without charge for parts and labor. Simply bring
your RadioShack sales slip as proof of purchase date to any RadioShack store. War-
ranty does not cover transportation costs. Nor does it cover a product subjected to mis-
use or accidental damage.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES
AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states do
not permit limitation or exclusion of implied warranties; therefore, the aforesaid limita-
tion(s) or exclusion(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A6
Printed in Thailand
|